[JBoss JIRA] Created: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
3:43 p.m.
Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't
process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:01 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12411313 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
JBIDE-2163 & JBIDE-2164 - was specific issues for my test environment when I fix it -
I find what currently there are some performance problems and JBIDE-2162 is just trial of
this. So I'll create new issue and make it related.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:21 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12411321 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
JBIDE-2173 - related - but not the same.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:41 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=all ]
Max Rydahl Andersen updated JBIDE-2162:
---------------------------------------
Fix Version/s: 2.1.x
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.1.x
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:10 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=all ]
Max Rydahl Andersen updated JBIDE-2162:
---------------------------------------
Fix Version/s: 3.0.alpha
(was: 2.1.2)
so this is not related to any database setup.....did you look into what causes it?
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:01 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417013 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
yes, I look into to and find why it happend. The most time consuming thing here is ->
JDBCReader -> readDatabaseSchema -> resolveForeignKeys.
Firstly I suspected what JBIDE-2162 & JBIDE-2173 was different. But now it clear what
these issues are definitely the same.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:10 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417016 ]
Max Rydahl Andersen commented on JBIDE-2162:
--------------------------------------------
"Select all tables and press ok" ...resolveForeignKeys is not called in that
process so how could that affect this ?
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:27 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417021 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
I try debug DatabaseMetaData code and seems I find the reason. The main problem here - for
each table extracted all foreing keys for all tables:
JDBCReader::processForeignKeys -> JDBCMetaDataDialect::getExportedKeys ->
DatabaseMetaData::getExportedKeys -> DatabaseMetaData::extractForeignKeyFromCreateTable
-> DatabaseMetaData::extractForeignKeyForTable.
It seems possible to extract it only once.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:32 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417025 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
>>
"Select all tables and press ok"
...resolveForeignKeys is not called in that process so how could that affect this ?
>>
sorry, my thoughts was howto optimize
resolveForeignKeys :)
JBIDE-2162 & JBIDE-2173 not the same absolutely.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:58 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417033 ]
Max Rydahl Andersen commented on JBIDE-2162:
--------------------------------------------
btw. about "for each table extracted all foreign keys for all tables", I
don't see that in the code - it always ask for exported keys for a specifc table.
Where do you see it only do a % query ?
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:10 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417035 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
com.mysql.jdbc.DatabaseMetaData::extractForeignKeyFromCreateTable -> "rs =
getTables(catalog, "", "%", new String[] { "TABLE"
});"
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:16 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417071 ]
Max Rydahl Andersen commented on JBIDE-2162:
--------------------------------------------
That is in mysql code, right ? Not ours. Please be more specific.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:28 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417074 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
yes, this is MySQL code, but it should be possible workaround it. Should be possible to
implement it for n steps, now we have n^2.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:52 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12417087 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
return to the issue - I'll try to fix it - as I see the main drawback here -
"editor.getReverseEngineeringDefinition().addTable(retable);" after any addTable
- here xml node formated and DOMReverseEngineeringDefinition.hibernateMappingChanged()
-> TablePropertiesContentProvider -> viewer.refresh();
it seems possible to perform these only once after all tables be added.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:40 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=all ]
Vitali Yemialyanchyk updated JBIDE-2162:
----------------------------------------
Attachment: JBIDE-2162_20080620.zip
"JBIDE-2162_20080620.zip" patch optimize performance - example 200 tables db -
select all and add all - was 5 minutes - now 8 seconds;
also add wait cursor;
also now the tree is multiselectional and posible to select all items and delete all.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.alpha
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:04 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12418179 ]
Max Rydahl Andersen commented on JBIDE-2162:
--------------------------------------------
Two things:
1) SWT.MULTI | SWT.NULL, why not just SWT.MULTI ?
2) Why didn't you introduce a addTables(Table[]) operation that could allow the
subclasses to take care of the large operation
instead of exposing DOM specific code in the editor ?
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.alpha
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:36 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=comments#action_12418189 ]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
I'll update +removeTables(Table[]).
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.alpha
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:09 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=all ]
Vitali Yemialyanchyk updated JBIDE-2162:
----------------------------------------
Attachment: (was: JBIDE-2162_20080620.zip)
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.alpha
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:13 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[ http://jira.jboss.com/jira/browse/JBIDE-2162?page=all ]
Vitali Yemialyanchyk updated JBIDE-2162:
----------------------------------------
Attachment: JBIDE-2162_20080620.zip
patch update - small refactoring; excuse for blanks in
org.hibernate.eclipse.console.model_patch.txt - only addTables & removeTables were
added.
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: http://jira.jboss.com/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.alpha
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:27 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Max Rydahl Andersen updated JBIDE-2162:
---------------------------------------
Fix Version/s: 3.0.0.beta
(was: 3.0.0.alpha)
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.beta
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:30 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Max Rydahl Andersen updated JBIDE-2162:
---------------------------------------
Fix Version/s: 3.0.0.cr1
(was: 3.0.0.beta1)
slip all minor and below
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.cr1
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:31 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Max Rydahl Andersen updated JBIDE-2162:
---------------------------------------
Fix Version/s: 3.0.0.GA
(was: 3.0.0.CR2)
slip
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.0.0.GA
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:18 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Max Rydahl Andersen updated JBIDE-2162:
---------------------------------------
Fix Version/s: 3.1.0
(was: 3.0.0.GA)
ran out of time for this one :(
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.1.0
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:07 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Vitali Yemialyanchyk updated JBIDE-2162:
----------------------------------------
Fix Version/s: 3.1.0.M3
(was: 3.1.0.M2)
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.1.0.M3
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:09 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Vitali Yemialyanchyk commented on JBIDE-2162:
---------------------------------------------
have a sence to update the patch and apply it?
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.1.0.M3
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:52 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Vitali Yemialyanchyk updated JBIDE-2162:
----------------------------------------
Fix Version/s: 3.1.0.M4
(was: 3.1.0.M3)
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: JBoss Tools
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: 3.1.0.M4
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:30 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://jira.jboss.org/jira/browse/JBIDE-2162?page=com.atlassian.jira.plu...
]
Vitali Yemialyanchyk updated JBIDE-2162:
----------------------------------------
Fix Version/s: LATER
(was: 3.1.0.M4)
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://jira.jboss.org/jira/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Vitali Yemialyanchyk
Priority: Minor
Fix For: LATER
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
9:53 a.m.
New subject: [JBoss JIRA] (JBIDE-2162) Hibernate reverse engeniering editor -> Table & Columns -> Add... - can't process a lot of tables
[
https://issues.jboss.org/browse/JBIDE-2162?page=com.atlassian.jira.plugin...
]
Max Rydahl Andersen updated JBIDE-2162:
---------------------------------------
Assignee: Koen Aers (was: Dmitry Geraskov)
Hibernate reverse engeniering editor -> Table & Columns ->
Add... - can't process a lot of tables
-------------------------------------------------------------------------------------------------
Key: JBIDE-2162
URL: https://issues.jboss.org/browse/JBIDE-2162
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: hibernate
Reporter: Vitali Yemialyanchyk
Assignee: Koen Aers
Priority: Minor
Fix For: LATER
Attachments: JBIDE-2162_20080620.zip
For test purposes I create org.hibernate.eclipse.console.test ->
org.hibernate.eclipse.console.db.test.BigDBCreateTest - the main goal of this class is
creation test database with specified number of related tables. Then with helh of
BigDBCreateTest I create a big enough database with 3000 tables in it. And then I try to
test hibernate plugins performance. I create a configuration for my test db and I create
reveng.xml for this configuration. Then I open reveng.xml in the Hibernate reverse
engeniering editor -> I open Table & Columns tab -> I press Add... button ->
I get tables selection dialog with all tables in it -> then I slect all tables and
press Ok button -> I get Eclipse hanging - it do not respond in reasonable period of
time - so I should terminate it.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
4233
days inactive
5843
days old
jbosstools-issues@lists.jboss.org
27 comments
2 participants
participants (2)
-
Max Rydahl Andersen (JIRA) -
Vitali Yemialyanchyk (JIRA)