6:33 a.m.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: JBoss Tools
Issue Type: Feature Request
Components: Hibernate
Affects Versions: LATER
Reporter: Alexander Chabatar
Assigned To: Alexander Chabatar
Priority: Minor
Fix For: LATER
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:33 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Alexander Chabatar updated JBIDE-1421:
--------------------------------------
Attachment: wizard.png
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: JBoss Tools
Issue Type: Feature Request
Components: Hibernate
Affects Versions: LATER
Reporter: Alexander Chabatar
Assigned To: Alexander Chabatar
Priority: Minor
Fix For: LATER
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:41 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12390428 ]
Max Andersen commented on JBIDE-1421:
-------------------------------------
#1 you do not need a console configuration to create the file, so this is not an error
#2 Sounds fair
#3 ok
#4 Why!?
#5 yeah could/should be an warning
Remember that the same code is used for the dialog and for the .reveng.xml editor so lets
keep it flexible enough for both.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: JBoss Tools
Issue Type: Feature Request
Components: Hibernate
Affects Versions: LATER
Reporter: Alexander Chabatar
Assigned To: Alexander Chabatar
Priority: Minor
Fix For: LATER
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:48 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Denis Golovin updated JBIDE-1421:
---------------------------------
Affects Version/s: 2.0.0.GA
(was: LATER)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: JBoss Tools
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Alexander Chabatar
Priority: Minor
Fix For: LATER
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:10 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Denis Golovin updated JBIDE-1421:
---------------------------------
Assignee: Dima Geraskov (was: Alexander Chabatar)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: JBoss Tools
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Dima Geraskov
Priority: Minor
Fix For: LATER
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:23 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Fix Version/s: 2.0.1
(was: LATER)
Affects Version/s: (was: 2.0.0.GA)
Assignee: Vitali Yemialyanchyk (was: Dima Geraskov)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Reporter: Alexander Chabatar
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:09 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Max Andersen updated JBIDE-1421:
--------------------------------
Affects Version/s: 2.0.0.GA
not sure why affect version were removed.
Please be 100% sure that you don't break something when fixing this in .0.1!
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:16 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12395257 ]
Max Andersen commented on JBIDE-1421:
-------------------------------------
btw. #2 "the same issue for all other buttons" is incorrect. Any editing button
like Add is ok to do even though there is no configuration.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:38 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: patch_part1.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.0.1
Attachments: patch_part1.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:40 p.m.
New subject: [JBoss JIRA] Assigned: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk reassigned JBIDE-1421:
-------------------------------------------
Assignee: Max Andersen (was: Vitali Yemialyanchyk)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: patch_part1.txt, patch_part2.txt, patch_part3.txt, patch_part4.txt,
wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:40 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: patch_part2.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.0.1
Attachments: patch_part1.txt, patch_part2.txt, patch_part3.txt, patch_part4.txt,
wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:40 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: patch_part3.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.0.1
Attachments: patch_part1.txt, patch_part2.txt, patch_part3.txt, patch_part4.txt,
wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:40 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: patch_part4.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Vitali Yemialyanchyk
Priority: Minor
Fix For: 2.0.1
Attachments: patch_part1.txt, patch_part2.txt, patch_part3.txt, patch_part4.txt,
wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:56 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12396938 ]
Max Andersen commented on JBIDE-1421:
-------------------------------------
this patch has a todo in the parts of the reveng.xml text editor.
plus this patch uses full reverse engineering to test if the database it there - that is a
waaaay to heavy method to do that.
Just need to see if a connection can be established. Maybe look into what DTP sends to the
database to do their ping.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: patch_part1.txt, patch_part2.txt, patch_part3.txt, patch_part4.txt,
wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:32 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: patch.txt
this is file instead of patch_part1.txt
TableFilterView, TableFilterWizardPage, TreeToTableComposite - fix for JBIDE-1421
ConsoleConfigurationWizardPage, NewConfigurationWizard, NewConfigurationWizardPage - fix
for JBIDE-1420
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: patch.txt, patch_part1.txt, patch_part2.txt, patch_part3.txt,
patch_part4.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:40 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: patch2.txt
this is instead of patch_part4.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: patch.txt, patch2.txt, patch_part1.txt, patch_part2.txt,
patch_part3.txt, patch_part4.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:48 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12397241 ]
Vitali Yemialyanchyk commented on JBIDE-1421:
---------------------------------------------
"plus this patch uses full reverse engineering to test if the database it there -
that is a waaaay to heavy method to do that.
Just need to see if a connection can be established. Maybe look into what DTP sends to the
database to do their ping."
it was not ready at that time - now it ready. this is JBIDE-1420 issue.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: patch.txt, patch2.txt, patch_part1.txt, patch_part2.txt,
patch_part3.txt, patch_part4.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:03 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12397252 ]
Max Andersen commented on JBIDE-1421:
-------------------------------------
i'm confused. Could you attach *one* .patch file and give it a date in the name so it
becomes easier to see which patch is what ?
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: patch.txt, patch2.txt, patch_part1.txt, patch_part2.txt,
patch_part3.txt, patch_part4.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:09 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: patch2.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:09 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: patch.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:09 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: patch_part1.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:09 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: patch_part2.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:09 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: patch_part4.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:09 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: patch_part3.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:11 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: ReverseEngineeringDefinitionImpl_patch.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:11 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: IReverseEngineeringDefinition_patch.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:11 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: DOMReverseEngineeringDefinition_patch.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:11 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: TreeToTableComposite_patch.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:11 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: TableFilterView_patch.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:11 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: TableFilterWizardPage_patch.txt
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:13 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12397308 ]
Vitali Yemialyanchyk commented on JBIDE-1421:
---------------------------------------------
I have changed patch files - to separate different bufixes.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:21 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12397923 ]
Max Andersen commented on JBIDE-1421:
-------------------------------------
if you attached a *single* patch file or at least zipped these into on zip file it would
be sooo much easier to verify/apply these patches.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: DOMReverseEngineeringDefinition_patch.txt,
IReverseEngineeringDefinition_patch.txt, ReverseEngineeringDefinitionImpl_patch.txt,
TableFilterView_patch.txt, TableFilterWizardPage_patch.txt,
TreeToTableComposite_patch.txt, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: DOMReverseEngineeringDefinition_patch.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: JBIDE-1421.zip
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: IReverseEngineeringDefinition_patch.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: ReverseEngineeringDefinitionImpl_patch.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: TableFilterView_patch.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: TableFilterWizardPage_patch.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Vitali Yemialyanchyk updated JBIDE-1421:
----------------------------------------
Attachment: (was: TreeToTableComposite_patch.txt)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:18 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12398893 ]
Max Andersen commented on JBIDE-1421:
-------------------------------------
I adjusted this patch to:
Not require a new filter change listener but just listen to the model and use existing
notiifcation mechanism
Validation is unfortunately only done in the dialog and not the reveng.xml editor; but
that could be done now.
Removed the disablement of refresh button since it did not work in all cases plus the
Refresh button would actually
ask for the user to select a configuration if none is selected saving the user for
guessing how to get the refresh button to do something. (plus its faster than having to go
to the first tab)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:10 a.m.
New subject: [JBoss JIRA] Resolved: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Max Andersen resolved JBIDE-1421.
---------------------------------
Fix Version/s: 2.1
Resolution: Done
applied to both branches (forgot to mention that i included a message dialog yes/no before
we actually do the removal of all elements)
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1, 2.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
9:07 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12398921 ]
Vitali Yemialyanchyk commented on JBIDE-1421:
---------------------------------------------
Max, I totally miss all your messages from 01/Feb when assign this issue to you - I do not
receive any letters about changes in it...
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1, 2.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:05 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=comments#action_12398933 ]
Max Andersen commented on JBIDE-1421:
-------------------------------------
Remember to watch issues or sign up on
https://lists.jboss.org/mailman/listinfo/jbosstools-issues to get notifications for all
jira activity.
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.0.1, 2.1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:04 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-1421) Hibernate Reverse Eng. Wizard: no validation on 2nd page
[ http://jira.jboss.com/jira/browse/JBIDE-1421?page=all ]
Max Andersen updated JBIDE-1421:
--------------------------------
Fix Version/s: 2.1.0.beta1
(was: 2.0.1)
(was: 2.1)
batch update of issues with 2.1 fix instead of the correct 2.1.b1
Hibernate Reverse Eng. Wizard: no validation on 2nd page
--------------------------------------------------------
Key: JBIDE-1421
URL: http://jira.jboss.com/jira/browse/JBIDE-1421
Project: Tools (JBoss Tools)
Issue Type: Feature Request
Components: Hibernate
Affects Versions: 2.0.0.GA
Reporter: Alexander Chabatar
Assigned To: Max Andersen
Priority: Minor
Fix For: 2.1.0.beta1
Attachments: JBIDE-1421.zip, wizard.png
1) Finish button is always enabled (even if no Console configuration is selected)
2) Refresh button should be enabled only if configuration is selected. The same issue for
all other buttons.
3) Add "Remove All" button to clear table filters list
4) When changing Console configuration from combo box - Table filters list from previous
configuration keeps the same. Maybe clear it?
5) Possible to add a lot of *.* table filters, no control for duplicates.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6569
days inactive
6696
days old
jbosstools-issues@lists.jboss.org
43 comments
4 participants
participants (4)
-
Alexander Chabatar (JIRA) -
Denis Golovin (JIRA)
-
Max Andersen (JIRA)
-
Vitali Yemialyanchyk (JIRA)