1:16 p.m.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Ganymede, JSF, Seam
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not wrapped
in #{ ... }, while when you bring it up again, the values are there, and they have the #{
... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:18 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Andy Gibson updated JBIDE-2321:
-------------------------------
Attachment: bug4.html
bug4.swf
Demo of the problem with auto completion. Notice how the contents of the auto completion
list change depending on whether it is the initial pop up, or a later auto completion
popup.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Ganymede, JSF, Seam
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:33 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Alexey Kazakov updated JBIDE-2321:
----------------------------------
Fix Version/s: 2.1.2
3.0.alpha
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:33 p.m.
New subject: [JBoss JIRA] Assigned: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Alexey Kazakov reassigned JBIDE-2321:
-------------------------------------
Assignee: Victor Rubezhny
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:56 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Max Rydahl Andersen updated JBIDE-2321:
---------------------------------------
Priority: Blocker (was: Major)
Victor - I put this as blocker since it sounds like a bad regression to me. Is that
correct or has it just always been "broken" like this ?
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:12 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416477 ]
Victor Rubezhny commented on JBIDE-2321:
----------------------------------------
Yes, max, this is a regression.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:18 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416479 ]
Max Rydahl Andersen commented on JBIDE-2321:
--------------------------------------------
ok - so this needs fixing as soon as possible.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:01 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416521 ]
Victor Rubezhny commented on JBIDE-2321:
----------------------------------------
The regression was made by estherbin after his modifications in
SeamELProposalProcessor.java
See the lines after comment:
// Added by estherbin
// JBIDE-2227
That fix was not correct.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:05 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416523 ]
Max Rydahl Andersen commented on JBIDE-2321:
--------------------------------------------
Those lines does look totally weird. We need to reopen JBIDE-2227 too then. Will you
handle this Victor?
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:58 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416545 ]
Victor Rubezhny commented on JBIDE-2321:
----------------------------------------
Yes, I will reopen JBIDE-2227.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:02 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Victor Rubezhny updated JBIDE-2321:
-----------------------------------
Comment: was deleted
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:02 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416548 ]
Victor Rubezhny commented on JBIDE-2321:
----------------------------------------
Max, the issue JBIDE-2227 has Coding in progress status. Probably they mean "for
testing"?
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:06 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416551 ]
Max Rydahl Andersen commented on JBIDE-2321:
--------------------------------------------
not sure - ask on that issue and estherbin should answer ;)
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:52 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416735 ]
Eugene Stherbin commented on JBIDE-2321:
----------------------------------------
[JBIDE-2227|http://jira.jboss.com/jira/browse/JBIDE-2227] issue done.
Max i'm not agree that [JBIDE-2227|http://jira.jboss.com/jira/browse/JBIDE-2227]
changes broken code assistant
We couldn't reproduced [this|http://jira.jboss.com/jira/browse/JBIDE-2227] issue
earlier because code assistant didn't work without #{ characters and show all
proposals instead of matching proposals. see
([JBIDE-2227|http://jira.jboss.com/jira/browse/JBIDE-2227] ) .
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:56 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Eugene Stherbin updated JBIDE-2321:
-----------------------------------
Comment: was deleted
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:58 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416738 ]
Eugene Stherbin commented on JBIDE-2321:
----------------------------------------
JBIDE-2227 issue done.
Max i'm not agree that JBIDE-2227 changes broken code assistant
We couldn't reproduced http://jira.jboss.com/jira/browse/JBIDE-2227 issue earlier
because code assistant didn't work without #{ characters and show all proposals
instead of matching proposals. see (http://jira.jboss.com/jira/browse/JBIDE-2227 ) .
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
9:01 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416777 ]
Max Rydahl Andersen commented on JBIDE-2321:
--------------------------------------------
Well JBIDE-2227 introduced some funky modulo calculation which caused a different behavior
;)
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:05 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416835 ]
Maxim Areshkau commented on JBIDE-2321:
---------------------------------------
If we revert changes of jbide-2227(it's reproduceble with this changes to) and trying
to call ca in such position <h:outputText value="| /> it shows only jsf
variables and doesn't shows seam, such behavior isn't correct.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:21 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=comments#action_12416958 ]
Max Rydahl Andersen commented on JBIDE-2321:
--------------------------------------------
Maxim, yes I understand that but that change broke other scenarios so the fix is not
correct.
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:40 a.m.
New subject: [JBoss JIRA] Resolved: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Alexey Kazakov resolved JBIDE-2321.
-----------------------------------
Resolution: Done
Fixed after ralling back JBIDE-2227
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: Ganymede, JSF, Seam
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 2.1.2, 3.0.alpha
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:50 a.m.
New subject: [JBoss JIRA] Closed: (JBIDE-2321) Problems with auto completion
[ http://jira.jboss.com/jira/browse/JBIDE-2321?page=all ]
Anton Klimkovich closed JBIDE-2321.
-----------------------------------
Verified on:
(2.1.2)
200806192021-nightly
and
(3.0 alpha)
200806192047-nightly
Problems with auto completion
-----------------------------
Key: JBIDE-2321
URL: http://jira.jboss.com/jira/browse/JBIDE-2321
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: JSF, Seam, Ganymede
Environment: JBoss Tools Nightly Build
(JBossTools-200806100349-nightly-ALL-win32.zip) and the build drivers for that build
(Eclipse 3.4 RC3, WTP 3.0 RC3) Windows XP
Reporter: Andy Gibson
Assigned To: Victor Rubezhny
Priority: Blocker
Fix For: 3.0.0.alpha, 2.1.2
Attachments: bug4.html, bug4.swf
The problem is demonstrated in the attached movie file :
Create a new application, and open home.xhtml and move to the end.
Start typing <h:outputte and when auto complete pops up, select outputText, the tag is
put into the document and the value="" attribute is also added. The caret is
placed between the double quotes and the auto completion selection pops up.
Initially, the list of values in the auto completion box consists of everything that
should be there, but it is not wrapped in an EL expression #{ ... } (i.e.
"conversation" is there, but not "#{conversation}"). As soon as you
type #{ in the page, the code completion dialog filters out most of the values, except the
basic EL expressions (#{applicationScope}, #{param}, #{facesContext}, #{cookie}).
To get proper code suggestions, you need to close the code completion pop up, and re-open
it to get the right list of values, i.e. Seam generated suggestions,
It almost looks like in the initial pop up, the values are there, but they are not
wrapped in #{ ... }, while when you bring it up again, the values are there, and they have
the #{ ... }
This is mostly a problem because it happens in the auto-completion box that is popped up
when the IDE auto completes a JSF tag.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6508
days inactive
6518
days old
jbosstools-issues@lists.jboss.org
20 comments
7 participants
participants (7)
-
Alexey Kazakov (JIRA) -
Andy Gibson (JIRA)
-
Anton Klimkovich (JIRA)
-
Eugene Stherbin (JIRA)
-
Max Rydahl Andersen (JIRA)
-
Maxim Areshkau (JIRA)
-
Victor Rubezhny (JIRA)