12:45 p.m.
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Reporter: Marek Baluch
Attachments: fault_handler.zip
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:47 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Marek Baluch updated JBIDE-8045:
--------------------------------
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Attachments: fault_handler.zip
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:39 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Robert (Bob) Brodt commented on JBIDE-8045:
-------------------------------------------
Yep, this had a couple of problems...
According to the BPEL spec, the data thrown with a fault can be a WSDL message type or a
XML Schema element. I'm thinking the faultElement attribute of the <catch>
should probably be an XML type (a XSDTypeDefinition java object) even though the BPEL EMF
model has this defined as an XML element (a XSDElementDeclaration). This is going to
require a model change.
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Attachments: fault_handler.zip
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:33 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Max Rydahl Andersen updated JBIDE-8045:
---------------------------------------
Fix Version/s: 3.2.x
3.3.x
Bob another without some fix version - please adjust accordingly.
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.x, 3.3.x
Attachments: fault_handler.zip
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:40 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Brian Fitzpatrick commented on JBIDE-8045:
------------------------------------------
Bob, bumped to 3.2.1 for now. If not 3.2.1, should probably go in a 3.3 release or LATER.
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.1, 3.3.x
Attachments: fault_handler.zip
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:40 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Brian Fitzpatrick updated JBIDE-8045:
-------------------------------------
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
Fix Version/s: 3.2.1
(was: 3.2.x)
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.1, 3.3.x
Attachments: fault_handler.zip
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:22 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Robert (Bob) Brodt commented on JBIDE-8045:
-------------------------------------------
As it turns out, the BPEL model is correct: the <catch> fault variable can only be a
Message or an XSD element (see section 12.5 of the BPEL spec). Therefore, I have
refactored the type selection dialog and properties sections so that the filters are
limited to only those types that are valid within the context of the selected variable or
property.
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.1, 3.3.x
Attachments: fault_handler.zip
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:31 p.m.
New subject: [JBoss JIRA] Resolved: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Robert (Bob) Brodt resolved JBIDE-8045.
---------------------------------------
Resolution: Done
refactored type selection dialog and properties sections
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.1, 3.3.x
Attachments: fault_handler.zip
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:26 p.m.
New subject: [JBoss JIRA] Closed: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Pavol Srna closed JBIDE-8045.
-----------------------------
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.1.M1, 3.3.x
Attachments: fault_handler.zip
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:26 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Pavol Srna commented on JBIDE-8045:
-----------------------------------
Verified on jbdevstudio-product-eap-linux-gtk-4.1.0.v201104171649R-H346-M1.
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: bpel
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.1.M1, 3.3.x
Attachments: fault_handler.zip
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:44 a.m.
New subject: [JBoss JIRA] (JBIDE-8045) Unable to select fault variable data type in faultHandler.
[
https://issues.jboss.org/browse/JBIDE-8045?page=com.atlassian.jira.plugin...
]
Denis Golovin closed JBIDE-8045.
--------------------------------
Fix Version/s: (was: 3.3.x)
Resolution: Done
Unable to select fault variable data type in faultHandler.
----------------------------------------------------------
Key: JBIDE-8045
URL: https://issues.jboss.org/browse/JBIDE-8045
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: BPEL
Affects Versions: 3.2.0.Beta2, 3.2.0.CR1
Environment: JBoss tools Build: 3.2_trunk.2010-12-16_04-27-01-H504
Reporter: Marek Baluch
Assignee: Robert (Bob) Brodt
Fix For: 3.2.1.M1
Attachments: fault_handler.zip
Original Estimate: 0 minutes
Remaining Estimate: 0 minutes
User is not able to select the data type for a user defined fault when defining a
faultHandler catch branch. It's possible to attempt to select the data type using the
browse button but the chosen type is not noticed by the UI. The message structure is
missing too.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
4547
days inactive
4926
days old
jbosstools-issues@lists.jboss.org
10 comments
6 participants
participants (6)
-
Brian Fitzpatrick (JIRA) -
Denis Golovin (JIRA)
-
Marek Baluch (JIRA)
-
Max Rydahl Andersen (JIRA)
-
Pavol Srna (JIRA)
-
Robert (Bob) Brodt (JIRA)