4:27 p.m.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:36 p.m.
New subject: [JBoss JIRA] Assigned: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Snjezana Peco reassigned JBIDE-4937:
------------------------------------
Assignee: Snjezana Peco
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:39 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Snjezana Peco updated JBIDE-4937:
---------------------------------
Fix Version/s: 3.1.0.M4
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:59 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
A test case to reproduce the issue :
To reproduce, I'm using JBoss Tools 3.1.0.M2.
1. Create a new Seam project named seambirtweb with BIRT reporting runtime facet.
2. download the attachment JBIDE-4937-1.zip and unzip its content into the seam web
project (it adds a java class, overrides components.xml, pages.xml, adds some xhtml pages
and a birt report).
3. remove src/main/META-INF/persistence.xml (you can let it, but since I have a space in
my workspace directory, Hibernate stops working for me ;( ).
4. start JBoss (I'm using 4.2.2) and add the webapp.
5. connect to http://localhost:8080/seam-birt-web/birttests.seam
6. select Test Birt Embed, you'll have the following error :
ReportDesign (id = 1):
+ There are errors evaluating script "importPackage(Packages.org.jboss.seam);
importPackage(Packages.org.apache.log4j);
logger.info("reportContext.getHttpServletRequest =
"+reportContext.getHttpServletRequest());
sampleReportList = Component.getInstance("sampleReportList", false);
logger = Logger.getLogger("com.natixis.birt");
logger.warn("sampleReportList = "+sampleReportList);
reportsIterator = sampleReportList.getNames().iterator();
":
{1}.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:59 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian updated JBIDE-4937:
-----------------------------------
Attachment: JBIDE-4937-1.zip
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:42 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian updated JBIDE-4937:
-----------------------------------
Attachment: JBIDE-4937-2.zip
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:44 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
Sorry use JBIDE-4937-2.zip attachment instead of JBIDE-4937-1.zip (test.rptdesign and
birttests.xhtml where incorrect.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:46 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian updated JBIDE-4937:
-----------------------------------
Attachment: JBIDE-4937-patch1.zip
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:51 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
Attachment JBIDE-4937-patch1.zip includes a proposed patch.
To test it, install test case JBIDE-4937-2.zip in order to have a sample :
1. remove WebContent/WEB-INF/lib/jboss-seam-birt.jar
2. add in src/main/ :
. UIDocument from JBIDE-4937-patch1.zip
. UIParameter from JBIDE-4937-patch1.zip
3. add in src/main/META-INF :
faces-config.xml from JBIDE-4937-patch1.zip
seam-birt.taglib.xml from JBIDE-4937-patch1.zip
3. restart
Please note that I've changed more than needed in UIDocument class :
- JBossBirtServlet content is included in streaming mode (not copied in a buffer as
before).
- I've moved all the logic from encodeBegin to encodeEnd.
- UIDocument restoreState and saveState where modified as per JBIDE-4842.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:10 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
JBIDE-4937-patch1.zip includes a bug but I don't know how to resolve it : in embed
mode, p:birt adds a trailing >.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:27 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
FYI, if you use requestDispatcher.include you need to modify JBossBirtServlet to handle
POST requests.
I had a POST not supported 2 minutes ago with patch1 ;(
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:51 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
JBIDE-4937-patch1.zip is really broken :
- included content in embed mode is now inserted in the wrong place [1]
- report name encoding pb now when using frameset mode.
[1] explanation from http://markmail.org/message/rordldae3h45xmwb
'JSF use own ResponseWriter, usualy buffered - since simple call
RequestDispatcher.include will insert content in wrong place.
You need create own ResponseWrapper with using JSF ResponseWriter.'
I'll try to make some time next week to work more on it (but it becomes a bit
difficult, I'm moving in other projects), and take code from here
http://markmail.org/message/le3ijxha55kksnyp to replace the bugged
EmbedHttpServletResponseWrapper with ResponseWrapper.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:26 p.m.
New subject: [JBoss JIRA] Resolved: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Snjezana Peco resolved JBIDE-4937.
----------------------------------
Resolution: Done
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:34 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
Hello Snjezana,
Thanks for your patch.
I've just tested
http://fisheye.jboss.org/viewrep/JBossTools/trunk/birt/plugins/org.jboss.....
There are 2 bugs :
- encoding problem : birt servlet outputs its content in binary mode but you read it in
caracter mode.
- p:param parameters and the other tag attributes are not propagated in the
requestDispatcher.include when using embed mode (you would also need to have a
RequestWrapper I think).
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:45 p.m.
New subject: [JBoss JIRA] Updated: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian updated JBIDE-4937:
-----------------------------------
Attachment: UIDocument.java
Patch for r=17773 encoding problem
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip,
UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:51 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
The bug 'parameter propragation in embed mode' was resolved with
JBIDE-4937-patch1.zip - but I've needed to modify UIDocument to handle parameters in
encodeEnd and not in EncodeBegin and to create an inner class : HttpParameters.
Also there ws a bug in this patch : you need to change the line :
buffer.append(separator).append(name).append("=").append(URLEncoder.encode(value,
"UTF-8"));
with
buffer.append(separator).append(name).append("=").append(value);
otherwise value was encoded 2 times.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip,
UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:53 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian commented on JBIDE-4937:
----------------------------------------
Also looked at last revision of JBossBirtServlet
(http://fisheye.jboss.org/browse/~raw,r=17709/JBossTools/trunk/birt/plugin...)
You must now change doPost implementation to call doGet (otherwise embed mode will not
work on jsf postback now that you use requestDispatcher.dispatch mode ;) ).
That's all !
Thanks very much Snjezana for your time
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip,
UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:07 p.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Snjezana Peco commented on JBIDE-4937:
--------------------------------------
- encoding problem : birt servlet outputs its content in binary mode
but you read it in caracter mode.
The JBossBirtServlet always outputs HTML format.
Your UIDocument.java encodes the servlet's output as UTF-8 which is not always
correct.
- p:param parameters and the other tag attributes are not propagated
in the requestDispatcher.include when using embed mode (you would also need to have a
RequestWrapper I think).
p:param parameters are propagated which you can test by adding "<b:param
name="sample" value="test1" />" to testbirtembed.xhtml
Other tags are also propagated, but JBossBirtServlet interprets only __report,
__embeddable and __masterpage.
If you would like this servlet to interpret some other tag, please create a feature
request.
You must now change doPost implementation to call doGet (otherwise
embed mode will not work on jsf postback now that you use requestDispatcher.dispatch mode
;) ).
I can't reproduce this issue. The p:birt tag always calls the doGet method.
Max,
We could render a BIRT report using a Seam component, but that would introduce a
dependency to Seam. The current implementation is a pure JSF implementation.
What do you think about this?
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-patch1.zip,
UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:44 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Gonzalez Adrian updated JBIDE-4937:
-----------------------------------
Attachment: JBIDE-4937-3.zip
This test case allows us to test :
- character encoding problem in embed mode.
- postback problem in embed mode.
And for the last : 'p:param parameters and the other tag attributes are not
propagated' - there's no such bug (my fault, sorry !)
To install test case :
1. create a new Seam Web project (with BIRT reporting facet) with package
org.domain.sample.session.
2. unzip JBIDE-4937-3.zip into project
this copies components.xml, birttests.xhtml, testbirtembed.xhtmln EncodingHome +
EncodingHome.properties, testencoded.xhtml + testencoded.rptdesign +
testencodedembed.xhtml, pages.xml
3. update jboss birt libs
. remove jboss-seam-birt.jar and jboss-birt-servlet.jar and replace them with
http://fisheye.jboss.org/browse/~raw,r=17773/JBossTools/trunk/birt/plugin...
and
http://fisheye.jboss.org/browse/~raw,r=17709/JBossTools/trunk/birt/plugin...
To reproduce encoding problem :
1. use your browser on http://localhost:8080/ /birttests.seam
you should see a page with 5 links to birt reports and the output 'this is the
euro character : €'
2. execute link Test Encoded Birt.
The pdf should display the euro character.
3. execute link Test Encoded Birt Embed.
The embeded html doesn't display correctly the euro character.
To reproduce postback problem :
1. use your browser on http://localhost:8080/ /birttests.seam
2. execute link Test Postback Birt Embed.
The report should diplay fine (modulo euro character pb).
3. click button Test Postback.
You should see the message Post Not Supported.
For the question about utf-8 encoding, I think (but not sure - don't know how to
activate debug mode in osgi bundles) - that birt always use utf-8 encoding to output
reports in HTML format).
See in org.eclipse.birt.report.engine.emitter.html_2.3.2.r232_20090202.jar class
org.eclipse.birt.report.engine.emitter.html.HTMLReportEmitter, method
start(IReportContent report) :
public void start(IReportContent report)
{
logger.log(Level.FINE, "[HTMLReportEmitter] Start emitter.");
this.report = report;
writer.open(out, "UTF-8");
ReportDesignHandle designHandle = null;
Report reportDesign = null;
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-3.zip,
JBIDE-4937-patch1.zip, UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:46 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Max Rydahl Andersen commented on JBIDE-4937:
--------------------------------------------
About dependencies and seam vs jsf then I think we should move all of the
"runtime" parts of this into Seam or at least a standalone project instead of
being part of the tooling.
Of course our tooling should understand the "runtime" bits.
That would allow you more easily to do what you need to do to.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-3.zip,
JBIDE-4937-patch1.zip, UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:55 a.m.
New subject: [JBoss JIRA] Reopened: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Snjezana Peco reopened JBIDE-4937:
----------------------------------
For now, I will create a separate project and fix the mentioned problems.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-3.zip,
JBIDE-4937-patch1.zip, UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:08 a.m.
New subject: [JBoss JIRA] Resolved: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Snjezana Peco resolved JBIDE-4937.
----------------------------------
Resolution: Done
I have fixed the issues described in
https://jira.jboss.org/jira/browse/JBIDE-4937?focusedCommentId=12487667#a...
I have also created a new project
https://anonsvn.jboss.org/repos/jbosstools/workspace/snjeza/JBossBirtInte...
It is a pure Maven project that contains two modules:
- birttag
which creates jboss-seam-birt.jar and depends on JSF libraries
- birtservlet
which creates jboss-birt-servlet.jar and depends on BIRT libraries.
The BIRT 2.3.2 version is used because the JBoss repository doesn't contain the 2.5.x
version which is irrelevant since these libraries are used only at compile time.
The project doesn't depend on Seam.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-3.zip,
JBIDE-4937-patch1.zip, UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:06 a.m.
New subject: [JBoss JIRA] Updated: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Octavian S updated JBIDE-4937:
------------------------------
Attachment: JBIDE-4937-patch2.zip
Revised an issue where the value of a parameter was not getting retrieved from the
FacesContext when it was null.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-3.zip,
JBIDE-4937-patch1.zip, JBIDE-4937-patch2.zip, UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:57 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Max Rydahl Andersen commented on JBIDE-4937:
--------------------------------------------
Gonzalez - if you got fixes for other bugs please open a new issue.
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-3.zip,
JBIDE-4937-patch1.zip, JBIDE-4937-patch2.zip, UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
9:16 a.m.
New subject: [JBoss JIRA] Commented: (JBIDE-4937) birt - Seam component always null with birt embed
[
https://jira.jboss.org/jira/browse/JBIDE-4937?page=com.atlassian.jira.plu...
]
Snjezana Peco commented on JBIDE-4937:
--------------------------------------
Revised an issue where the value of a parameter was not getting
retrieved from the FacesContext when it was null.
Could you provide a reproducible test case?
birt - Seam component always null with birt embed
-------------------------------------------------
Key: JBIDE-4937
URL: https://jira.jboss.org/jira/browse/JBIDE-4937
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: birt
Reporter: Gonzalez Adrian
Assignee: Snjezana Peco
Fix For: 3.1.0.M4
Attachments: JBIDE-4937-1.zip, JBIDE-4937-2.zip, JBIDE-4937-3.zip,
JBIDE-4937-patch1.zip, JBIDE-4937-patch2.zip, UIDocument.java
I'm using a Seam component in birt report (from a scripted datasource).
Seam component is in conversation (or even session scope - same result).
When I try to access a Seam Component from a birt report and when I use embed
mode(designType="embed"), Seam component is always null (I'm accessing seam
component with Component.getInstance("sampleReportList", false);).
When I use designType="run", or frameset everything works fine.
Tthe issue is due to the session that isn't propagated in embed mode.
UIDocument class creates a new URLConnection to call JBossBirtServlet without propagating
session cookie JSESSIONID (or the session id parameter if session is propagated with url
rewriting).
JBossBirtServlet then calls birt engine, but in a new session context.
So the scripted source in birt engine cannot get a reference to any object stored in the
original session.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5998
days inactive
6116
days old
jbosstools-issues@lists.jboss.org
24 comments
4 participants
participants (4)
-
Gonzalez Adrian (JIRA) -
Max Rydahl Andersen (JIRA)
-
Octavian S (JIRA)
-
Snjezana Peco (JIRA)