[JBoss JIRA] (JBIDE-23206) build flag for always use current timestamp to assist QE in testing PRs
by Nick Boldt (JIRA)
[ https://issues.jboss.org/browse/JBIDE-23206?page=com.atlassian.jira.plugi... ]
Nick Boldt commented on JBIDE-23206:
------------------------------------
PR:
To test this out:
1. clone the jbosstools-build project and build the parent pom with this PR applied: https://github.com/jbosstools/jbosstools-build/pull/232
2. clone jbosstools-openshift, and build from master. observe the timestamps of openshift.client plugin and openshift.feature in jbosstools-openshift/site/target/repository/
3. apply this PR https://github.com/jbosstools/jbosstools-openshift/pull/1312 and build again. observe the timestamps of openshift.client plugin and openshift.feature.
4. NOW... using the new R profile in parent pom ( https://github.com/jbosstools/jbosstools-build/pull/232 ) rebuild openshift:
{code}mvn clean install -PR{code}
5. observe that ALL the features and plugins in jbosstools-openshift/site/target/repository/ have the timestamp of when you started the latest build, in UTC (GMT+0).
> build flag for always use current timestamp to assist QE in testing PRs
> -----------------------------------------------------------------------
>
> Key: JBIDE-23206
> URL: https://issues.jboss.org/browse/JBIDE-23206
> Project: Tools (JBoss Tools)
> Issue Type: Enhancement
> Components: build
> Affects Versions: 4.4.2.AM1
> Reporter: Rob Stryker
> Assignee: Nick Boldt
>
> In the case where a PR is not rebased against master constantly, QE is blocked from testing it under two situations:
> 1) The PR job has produced a site. QE installs most recent jbt, then tries to install the PR site. This fails because the PR site is older than the nightly build.
> 2) The QE rep checks out the PR and tries to build locally. The timestamps match the change date (ie the date the PR was last changed), which is still older than the nightly build.
> In both situations, QE cannot install a locally-built or PR-built site on top of a more recent nightly build of JBT. We cannot expect QE to rebase and (if required) merge / change code.
> The best bet here is to simply add a flag QE can use when building locally to always use current timestamp, to ensure locally built unit is always 'newest'.
> We then document that flag in devdoc for QE and make it part of their standard workflow.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBDS-3863) Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
by Robert Terzi (JIRA)
[ https://issues.jboss.org/browse/JBDS-3863?page=com.atlassian.jira.plugin.... ]
Robert Terzi updated JBDS-3863:
-------------------------------
Attachment: box-add-fail-1.1.0-ga.txt
Log file from failed vagrant box add with --debug using DevSuite-1.1.0-GA, on Windows 10,
> Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
> --------------------------------------------------------------------------------------
>
> Key: JBDS-3863
> URL: https://issues.jboss.org/browse/JBDS-3863
> Project: Red Hat JBoss Developer Studio (devstudio)
> Issue Type: Bug
> Components: platform-installer
> Affects Versions: 1.1.0.GA, 9.1.0.Beta1
> Environment: Windows 7/64 bit.
> (Some components of previous manual CDK install on the system).
> Reporter: Robert Terzi
> Assignee: Denis Golovin
> Fix For: 10.2.0.AM1
>
> Attachments: box-add-fail-1.1.0-ga.txt, install.log, jbds-install-log-win7-error.txt
>
>
> Using the platform installer, CDK installation failed, progress shown as 99%. At this point the installer was hung.
> Note:
> * CDK install progress said Failed, with progress stuck at 99%.
> * There is no way to cancel out of the install.
> * There was no pop-up about error messages.
> * No indication of where to look for error messages/logs etc.was provided.
> * CDK was previously installed manually. However, the installer window didn't say a previous CDK installation was detected, but the log does show it deleted the previous cdkv2 box.
> From the log it looks like the box add command failed. This might have been due to disk space, but it's not clear/obvious from the log.
> Note: after killing the installer and trying the `vagrant box add` command copied from the log file manually in Cygwin bash the box add command succeeded. The test system had 5-15 GB of free space between the installation started.
> Full log attached, excerpt here.
> Tue, 26 Apr 2016 18:05:38 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - postVagrantSetup called
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute command vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem"
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Installing the 'c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem' plugin. This can take a few minutes...
> Installed the plugin 'vagrant-registration (1.2.1)'!
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem" SUCCESS
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute command vagrant box remove cdkv2 -f
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Removing box 'cdkv2' (v0) with provider 'virtualbox'...
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute vagrant box remove cdkv2 -f SUCCESS
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute command vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk failed to install: Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBDS-3863) Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
by Robert Terzi (JIRA)
[ https://issues.jboss.org/browse/JBDS-3863?page=com.atlassian.jira.plugin.... ]
Robert Terzi commented on JBDS-3863:
------------------------------------
Here's the output from running vagrant directly. Not really helpful. Will try again with --debug and attach log.
==> box: Box file was not detected as metadata. Adding it directly...
==> box: Adding box 'cdkv2' (v0) for provider:
box: Unpacking necessary files from: file://C:/DevelopmentSuite/cdk/boxes/rhel-vagrant-virtualbox.box
box:
An error occurred while downloading the remote file. The error
message, if any, is reproduced below. Please fix this error and try
again.
.
> Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
> --------------------------------------------------------------------------------------
>
> Key: JBDS-3863
> URL: https://issues.jboss.org/browse/JBDS-3863
> Project: Red Hat JBoss Developer Studio (devstudio)
> Issue Type: Bug
> Components: platform-installer
> Affects Versions: 1.1.0.GA, 9.1.0.Beta1
> Environment: Windows 7/64 bit.
> (Some components of previous manual CDK install on the system).
> Reporter: Robert Terzi
> Assignee: Denis Golovin
> Fix For: 10.2.0.AM1
>
> Attachments: install.log, jbds-install-log-win7-error.txt
>
>
> Using the platform installer, CDK installation failed, progress shown as 99%. At this point the installer was hung.
> Note:
> * CDK install progress said Failed, with progress stuck at 99%.
> * There is no way to cancel out of the install.
> * There was no pop-up about error messages.
> * No indication of where to look for error messages/logs etc.was provided.
> * CDK was previously installed manually. However, the installer window didn't say a previous CDK installation was detected, but the log does show it deleted the previous cdkv2 box.
> From the log it looks like the box add command failed. This might have been due to disk space, but it's not clear/obvious from the log.
> Note: after killing the installer and trying the `vagrant box add` command copied from the log file manually in Cygwin bash the box add command succeeded. The test system had 5-15 GB of free space between the installation started.
> Full log attached, excerpt here.
> Tue, 26 Apr 2016 18:05:38 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - postVagrantSetup called
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute command vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem"
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Installing the 'c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem' plugin. This can take a few minutes...
> Installed the plugin 'vagrant-registration (1.2.1)'!
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem" SUCCESS
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute command vagrant box remove cdkv2 -f
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Removing box 'cdkv2' (v0) with provider 'virtualbox'...
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute vagrant box remove cdkv2 -f SUCCESS
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute command vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk failed to install: Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBDS-3863) Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
by Robert Terzi (JIRA)
[ https://issues.jboss.org/browse/JBDS-3863?page=com.atlassian.jira.plugin.... ]
Robert Terzi updated JBDS-3863:
-------------------------------
Attachment: install.log
Log from failed install of Devsuite-1.1.0-GA on fairly vanilla Windows 10 system. In this case the CDK install failed, because the vagrant box add failed.
> Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
> --------------------------------------------------------------------------------------
>
> Key: JBDS-3863
> URL: https://issues.jboss.org/browse/JBDS-3863
> Project: Red Hat JBoss Developer Studio (devstudio)
> Issue Type: Bug
> Components: platform-installer
> Affects Versions: 1.1.0.GA, 9.1.0.Beta1
> Environment: Windows 7/64 bit.
> (Some components of previous manual CDK install on the system).
> Reporter: Robert Terzi
> Assignee: Denis Golovin
> Fix For: 10.2.0.AM1
>
> Attachments: install.log, jbds-install-log-win7-error.txt
>
>
> Using the platform installer, CDK installation failed, progress shown as 99%. At this point the installer was hung.
> Note:
> * CDK install progress said Failed, with progress stuck at 99%.
> * There is no way to cancel out of the install.
> * There was no pop-up about error messages.
> * No indication of where to look for error messages/logs etc.was provided.
> * CDK was previously installed manually. However, the installer window didn't say a previous CDK installation was detected, but the log does show it deleted the previous cdkv2 box.
> From the log it looks like the box add command failed. This might have been due to disk space, but it's not clear/obvious from the log.
> Note: after killing the installer and trying the `vagrant box add` command copied from the log file manually in Cygwin bash the box add command succeeded. The test system had 5-15 GB of free space between the installation started.
> Full log attached, excerpt here.
> Tue, 26 Apr 2016 18:05:38 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - postVagrantSetup called
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute command vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem"
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Installing the 'c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem' plugin. This can take a few minutes...
> Installed the plugin 'vagrant-registration (1.2.1)'!
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem" SUCCESS
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute command vagrant box remove cdkv2 -f
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Removing box 'cdkv2' (v0) with provider 'virtualbox'...
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute vagrant box remove cdkv2 -f SUCCESS
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute command vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk failed to install: Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBDS-3863) Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
by Robert Terzi (JIRA)
[ https://issues.jboss.org/browse/JBDS-3863?page=com.atlassian.jira.plugin.... ]
Robert Terzi commented on JBDS-3863:
------------------------------------
The fairly fresh/vanilla Windows 10 machine I tried it on has Hyper-V enabled. Don't know if that is part of the cause.
Doesn't look like 1.1.0-GA supports Hyper-V.
Though I'm not sure if that's what's causing the box add to fail. Rerunning the vagrant command gives a stack trace in 'execute_curl'.
> Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
> --------------------------------------------------------------------------------------
>
> Key: JBDS-3863
> URL: https://issues.jboss.org/browse/JBDS-3863
> Project: Red Hat JBoss Developer Studio (devstudio)
> Issue Type: Bug
> Components: platform-installer
> Affects Versions: 1.1.0.GA, 9.1.0.Beta1
> Environment: Windows 7/64 bit.
> (Some components of previous manual CDK install on the system).
> Reporter: Robert Terzi
> Assignee: Denis Golovin
> Fix For: 10.2.0.AM1
>
> Attachments: jbds-install-log-win7-error.txt
>
>
> Using the platform installer, CDK installation failed, progress shown as 99%. At this point the installer was hung.
> Note:
> * CDK install progress said Failed, with progress stuck at 99%.
> * There is no way to cancel out of the install.
> * There was no pop-up about error messages.
> * No indication of where to look for error messages/logs etc.was provided.
> * CDK was previously installed manually. However, the installer window didn't say a previous CDK installation was detected, but the log does show it deleted the previous cdkv2 box.
> From the log it looks like the box add command failed. This might have been due to disk space, but it's not clear/obvious from the log.
> Note: after killing the installer and trying the `vagrant box add` command copied from the log file manually in Cygwin bash the box add command succeeded. The test system had 5-15 GB of free space between the installation started.
> Full log attached, excerpt here.
> Tue, 26 Apr 2016 18:05:38 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - postVagrantSetup called
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute command vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem"
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Installing the 'c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem' plugin. This can take a few minutes...
> Installed the plugin 'vagrant-registration (1.2.1)'!
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem" SUCCESS
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute command vagrant box remove cdkv2 -f
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Removing box 'cdkv2' (v0) with provider 'virtualbox'...
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute vagrant box remove cdkv2 -f SUCCESS
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute command vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk failed to install: Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBIDE-23206) build flag for always use current timestamp to assist QE in testing PRs
by Rob Stryker (JIRA)
[ https://issues.jboss.org/browse/JBIDE-23206?page=com.atlassian.jira.plugi... ]
Rob Stryker reassigned JBIDE-23206:
-----------------------------------
Assignee: Nick Boldt
> build flag for always use current timestamp to assist QE in testing PRs
> -----------------------------------------------------------------------
>
> Key: JBIDE-23206
> URL: https://issues.jboss.org/browse/JBIDE-23206
> Project: Tools (JBoss Tools)
> Issue Type: Enhancement
> Components: build
> Affects Versions: 4.4.2.AM1
> Reporter: Rob Stryker
> Assignee: Nick Boldt
>
> In the case where a PR is not rebased against master constantly, QE is blocked from testing it under two situations:
> 1) The PR job has produced a site. QE installs most recent jbt, then tries to install the PR site. This fails because the PR site is older than the nightly build.
> 2) The QE rep checks out the PR and tries to build locally. The timestamps match the change date (ie the date the PR was last changed), which is still older than the nightly build.
> In both situations, QE cannot install a locally-built or PR-built site on top of a more recent nightly build of JBT. We cannot expect QE to rebase and (if required) merge / change code.
> The best bet here is to simply add a flag QE can use when building locally to always use current timestamp, to ensure locally built unit is always 'newest'.
> We then document that flag in devdoc for QE and make it part of their standard workflow.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBIDE-23206) build flag for always use current timestamp to assist QE in testing PRs
by Rob Stryker (JIRA)
Rob Stryker created JBIDE-23206:
-----------------------------------
Summary: build flag for always use current timestamp to assist QE in testing PRs
Key: JBIDE-23206
URL: https://issues.jboss.org/browse/JBIDE-23206
Project: Tools (JBoss Tools)
Issue Type: Enhancement
Components: build
Affects Versions: 4.4.2.AM1
Reporter: Rob Stryker
In the case where a PR is not rebased against master constantly, QE is blocked from testing it under two situations:
1) The PR job has produced a site. QE installs most recent jbt, then tries to install the PR site. This fails because the PR site is older than the nightly build.
2) The QE rep checks out the PR and tries to build locally. The timestamps match the change date (ie the date the PR was last changed), which is still older than the nightly build.
In both situations, QE cannot install a locally-built or PR-built site on top of a more recent nightly build of JBT. We cannot expect QE to rebase and (if required) merge / change code.
The best bet here is to simply add a flag QE can use when building locally to always use current timestamp, to ensure locally built unit is always 'newest'.
We then document that flag in devdoc for QE and make it part of their standard workflow.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBDS-3863) Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
by Robert Terzi (JIRA)
[ https://issues.jboss.org/browse/JBDS-3863?page=com.atlassian.jira.plugin.... ]
Robert Terzi commented on JBDS-3863:
------------------------------------
Trying my first install of Devsuite 1.1 GA on Windows 10, same problem. Not disk space, 85 GB available.
Install.log says Error: command failed, vagrant box add, "An Error occurred when downloading the remote file. The error message, if any is reproduced below. Please fix this error and try again.".
(There isn't any text after that in installer.log).
> Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
> --------------------------------------------------------------------------------------
>
> Key: JBDS-3863
> URL: https://issues.jboss.org/browse/JBDS-3863
> Project: Red Hat JBoss Developer Studio (devstudio)
> Issue Type: Bug
> Components: platform-installer
> Affects Versions: 1.1.0.GA, 9.1.0.Beta1
> Environment: Windows 7/64 bit.
> (Some components of previous manual CDK install on the system).
> Reporter: Robert Terzi
> Assignee: Denis Golovin
> Fix For: 10.2.0.AM1
>
> Attachments: jbds-install-log-win7-error.txt
>
>
> Using the platform installer, CDK installation failed, progress shown as 99%. At this point the installer was hung.
> Note:
> * CDK install progress said Failed, with progress stuck at 99%.
> * There is no way to cancel out of the install.
> * There was no pop-up about error messages.
> * No indication of where to look for error messages/logs etc.was provided.
> * CDK was previously installed manually. However, the installer window didn't say a previous CDK installation was detected, but the log does show it deleted the previous cdkv2 box.
> From the log it looks like the box add command failed. This might have been due to disk space, but it's not clear/obvious from the log.
> Note: after killing the installer and trying the `vagrant box add` command copied from the log file manually in Cygwin bash the box add command succeeded. The test system had 5-15 GB of free space between the installation started.
> Full log attached, excerpt here.
> Tue, 26 Apr 2016 18:05:38 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - postVagrantSetup called
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute command vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem"
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Installing the 'c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem' plugin. This can take a few minutes...
> Installed the plugin 'vagrant-registration (1.2.1)'!
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem" SUCCESS
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute command vagrant box remove cdkv2 -f
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Removing box 'cdkv2' (v0) with provider 'virtualbox'...
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute vagrant box remove cdkv2 -f SUCCESS
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute command vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk failed to install: Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBDS-3863) Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
by Robert Terzi (JIRA)
[ https://issues.jboss.org/browse/JBDS-3863?page=com.atlassian.jira.plugin.... ]
Robert Terzi updated JBDS-3863:
-------------------------------
Affects Version/s: 1.1.0.GA
> Platform Installer Hung after CDK install failed, no way to cancel, no info on error.
> --------------------------------------------------------------------------------------
>
> Key: JBDS-3863
> URL: https://issues.jboss.org/browse/JBDS-3863
> Project: Red Hat JBoss Developer Studio (devstudio)
> Issue Type: Bug
> Components: platform-installer
> Affects Versions: 1.1.0.GA, 9.1.0.Beta1
> Environment: Windows 7/64 bit.
> (Some components of previous manual CDK install on the system).
> Reporter: Robert Terzi
> Assignee: Denis Golovin
> Fix For: 10.2.0.AM1
>
> Attachments: jbds-install-log-win7-error.txt
>
>
> Using the platform installer, CDK installation failed, progress shown as 99%. At this point the installer was hung.
> Note:
> * CDK install progress said Failed, with progress stuck at 99%.
> * There is no way to cancel out of the install.
> * There was no pop-up about error messages.
> * No indication of where to look for error messages/logs etc.was provided.
> * CDK was previously installed manually. However, the installer window didn't say a previous CDK installation was detected, but the log does show it deleted the previous cdkv2 box.
> From the log it looks like the box add command failed. This might have been due to disk space, but it's not clear/obvious from the log.
> Note: after killing the installer and trying the `vagrant box add` command copied from the log file manually in Cygwin bash the box add command succeeded. The test system had 5-15 GB of free space between the installation started.
> Full log attached, excerpt here.
> Tue, 26 Apr 2016 18:05:38 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\rhel-vagrant-virtualbox.box to c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Move C:\Users\rct\AppData\Local\Temp\7zSC53C.tmp\pscp.exe to c:\sw\rhjbds\cdk\bin\pscp.exe SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Write c:\sw\rhjbds\cdk\components\rhel\rhel-ose\.cdk SUCCESS
> Tue, 26 Apr 2016 18:05:43 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute powershell -ExecutionPolicy,ByPass,-File,C:\Users\rct\AppData\Local\Temp\set-pscp-path.ps1 SUCCESS
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - postVagrantSetup called
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute command vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem"
> Tue, 26 Apr 2016 18:05:44 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Installing the 'c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem' plugin. This can take a few minutes...
> Installed the plugin 'vagrant-registration (1.2.1)'!
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute vagrant plugin install "c:\sw\rhjbds\cdk\plugins\vagrant-registration-1.2.1.gem" SUCCESS
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute command vagrant box remove cdkv2 -f
> Tue, 26 Apr 2016 18:05:55 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Removing box 'cdkv2' (v0) with provider 'virtualbox'...
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute vagrant box remove cdkv2 -f SUCCESS
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute command vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> Tue, 26 Apr 2016 18:06:02 GMT-INFO: cdk - Execute options {
> "env": {
> "path": "C:\\HashiCorp\\Vagrant\\bin;C:\\Program Files\\Oracle\\VirtualBox\\;"
> }
> }
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk - The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
> Tue, 26 Apr 2016 18:06:10 GMT-ERROR: cdk failed to install: Error: Command failed: vagrant box add --name cdkv2 "c:\sw\rhjbds\cdk\boxes\rhel-vagrant-virtualbox.box"
> The box failed to unpackage properly. Please verify that the box
> file you're trying to add is not corrupted and try again. The
> output from attempting to unpackage (if any):
> x box.ovf
> x Vagrantfile
> x vagrant-virtualbox-box.vmdk: Write failed
> x metadata.json
> bsdtar.EXE: Error exit delayed from previous errors.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months
[JBoss JIRA] (JBIDE-22239) Allow a user to choose to permanently update their desired replicas for their deployment
by Alexey Kazakov (JIRA)
[ https://issues.jboss.org/browse/JBIDE-22239?page=com.atlassian.jira.plugi... ]
Alexey Kazakov updated JBIDE-22239:
-----------------------------------
Sprint: devex #119 August 2016 (was: devex #119 August 2016, devex #120 September 2016)
> Allow a user to choose to permanently update their desired replicas for their deployment
> -----------------------------------------------------------------------------------------
>
> Key: JBIDE-22239
> URL: https://issues.jboss.org/browse/JBIDE-22239
> Project: Tools (JBoss Tools)
> Issue Type: Enhancement
> Components: openshift
> Affects Versions: 4.4.0.Alpha1
> Reporter: Jeff Cantrill
> Assignee: Viacheslav Kabanovich
> Labels: openshift_v3
> Fix For: 4.5.0.AM1
>
>
> When scaling, we should provide an option to a user who is scaling their deployment to update the deploymentconfig desired replias setting. Currently, if you scale the deployment in the explorer view or the replicationcontroller in the tabs view, image or config change triggers from a DC will set the replica count to whats defined their. Suggest:
> * Adding a custom dialog in the "..to.." option
> * Update to use a spinner
> * Add a checkbox to 'make the change perminent'
> * If checkbox=true, you should only need to update the dc if it has a configchange trigger.
> * Optionally show checkbox if unable to determine the dc associated with the deployment.
--
This message was sent by Atlassian JIRA
(v6.4.11#64026)
9 years, 6 months