4:41 p.m.
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: 123 123
Priority: Minor
Fix For: 3.1.2
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:49 p.m.
New subject: [JBoss JIRA] Updated: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=all ]
Nick Belaevski updated RF-1246:
-------------------------------
Fix Version/s: (was: 3.1.2)
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: 123 123
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:49 p.m.
New subject: [JBoss JIRA] Updated: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=all ]
Nick Belaevski updated RF-1246:
-------------------------------
Fix Version/s: 3.2.0
Affects Version/s: 3.1.2
Assignee: Sergey Halipov
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: 123 123
Assigned To: Sergey Halipov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:26 p.m.
New subject: [JBoss JIRA] Resolved: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=all ]
Sergey Halipov resolved RF-1246.
--------------------------------
Resolution: Cannot Reproduce Bug
123 123, try to add datascroller to reRender list of commandLink:
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,scroller">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}"
id="scroller" />
<rich:dataTable id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: 123 123
Assigned To: Sergey Halipov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:56 p.m.
New subject: [JBoss JIRA] Assigned: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=all ]
Viktor Volkov reassigned RF-1246:
---------------------------------
Assignee: Viktor Volkov (was: Sergey Halipov)
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: 123 123
Assigned To: Viktor Volkov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:56 p.m.
New subject: [JBoss JIRA] Closed: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=all ]
Viktor Volkov closed RF-1246.
-----------------------------
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: 123 123
Assigned To: Sergey Halipov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:03 p.m.
New subject: [JBoss JIRA] Commented: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=comments#action_12396053 ]
Andreas Dangel commented on RF-1246:
------------------------------------
I have the same problems with the datascroller.
When the datascroller is before the dataTable, then I always need 2 requests to update the
datascroller correctly (when the data have changed).
When the datascrolller is after the dataTable, everything is correct!
I use Tomcat 5, Java 5, Richfaces 3.1.3GA, myfaces 1.1.5
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: 123 123
Assigned To: Viktor Volkov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:04 p.m.
New subject: [JBoss JIRA] Commented: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=comments#action_12401993 ]
Aleksey Korolev commented on RF-1246:
-------------------------------------
We are facing this issue as well. Looks like this issue is the same as RF-1133
"rich:datascroller does not reset when data model is changed"
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: Krashan Brahmanjara
Assigned To: Viktor Volkov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:22 a.m.
New subject: [JBoss JIRA] Commented: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=comments#action_12411838 ]
Karl Traunmueller commented on RF-1246:
---------------------------------------
I can confirm the exact same behavior as described in Andreas' comment (RichFaces
3.1.3.GA, Seam 2.0.1.GA, JBoss EAP 4.2)
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: Krashan Brahmanjara
Assigned To: Viktor Volkov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10 a.m.
New subject: [JBoss JIRA] Commented: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=comments#action_12421308 ]
Karl Traunmueller commented on RF-1246:
---------------------------------------
The issue is still present in RichFaces 3.2.1.GA
The relevant view fragment looks like this:
<pre>
<h:panelGroup>
<rich:datascroller for="vehiclesTable" maxPages="10"
status="status"
scrollerListener="#{vehicles.pageChanged}" />
<rich:dataTable id="vehiclesTable" value="#{vehiclesDataModel}"
var="vehicle" rows="#{vehicles.dataModel.pageSize}">
</pre>
- vehicles is a Seam POJO
- pageChanged is a DataScrollerEvent listener
- vehiclesDataModel is a lazy-loading paging table data model derived from
ExtendedDataModel
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: Krashan Brahmanjara
Assigned To: Viktor Volkov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:02 a.m.
New subject: [JBoss JIRA] Commented: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[ http://jira.jboss.com/jira/browse/RF-1246?page=comments#action_12421309 ]
Karl Traunmueller commented on RF-1246:
---------------------------------------
The issue is still present in RichFaces 3.2.1.GA
The relevant view fragment looks like this:
<pre>
<h:panelGroup>
<rich:datascroller for="vehiclesTable" maxPages="10"
status="status"
scrollerListener="#{vehicles.pageChanged}" />
<rich:dataTable id="vehiclesTable" value="#{vehiclesDataModel}"
var="vehicle" rows="#{vehicles.dataModel.pageSize}">
</pre>
- vehicles is a Seam POJO
- pageChanged is a DataScrollerEvent listener
- vehiclesDataModel is a lazy-loading paging table data model derived from
ExtendedDataModel
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: http://jira.jboss.com/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: Krashan Brahmanjara
Assigned To: Viktor Volkov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:19 p.m.
New subject: [JBoss JIRA] Commented: (RF-1246) rich:datascroller - looks different before and after rich:dataTable
[
https://jira.jboss.org/jira/browse/RF-1246?page=com.atlassian.jira.plugin...
]
Christian Küppers commented on RF-1246:
---------------------------------------
This issue is present in Version 3.2.2 too.
rich:datascroller - looks different before and after rich:dataTable
-------------------------------------------------------------------
Key: RF-1246
URL: https://jira.jboss.org/jira/browse/RF-1246
Project: RichFaces
Issue Type: Bug
Affects Versions: 3.1.2
Environment: Eclipse, Tomcat 6, Java 1.6, richfaces-ui-3.1.2.GA, jsf
1.2_04-b16-p02
Reporter: Krashan Brahmanjara
Assignee: Viktor Volkov
Priority: Minor
Fix For: 3.2.0
Simple action - commandLink run table filtering so table content sometimes are changed
1. For this sequence of code dataScroller is not displayed correctly. After filtering
Rowcount in scroller keeps old count of rows and count of buttons pages is incorrect
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
2. For this sequence everything is good. Scroller see correct table and row count
<a4j:commandLink
actionListener="#{table.filter}"reRender="table,">
<rich:dataTabl id="table" rows="10"
value="#{parSlowList.parElSloTable}" ></rich:dataTable>
<rich:datascroller align="left" for="table"
binding="#{table.dataScroller}" />
-----------------------------------
My filter looks like :
public void table.filter(ActionEvent event) {
loadTable(filterValue);
getDataScroller().setPage("first");
// getDataScroller().getDataTabe().getRowCount() <-- in first scenario this gave bad
row count
}
I think that UIDatascroller should contain resetDataTable method like UIDataFltrSlider or
something is wrong in getDataTable - UIDataFltrSlider.getDataTable looks different than
the same mathod in scroller.
public void resetDataTable() {
getSession().remove("...");
getDataTable().setValue(getDataTable().getValueBinding("#{" +
getForValRef() + "}"));
}
?
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5643
days inactive
6035
days old
richfaces-issues@lists.jboss.org
11 comments
8 participants
participants (8)
-
123 123 (JIRA) -
Aleksey Korolev (JIRA)
-
Andreas Dangel (JIRA)
-
Christian Küppers (JIRA)
-
Karl Traunmueller (JIRA)
-
Nick Belaevski (JIRA)
-
Sergey Halipov (JIRA)
-
Viktor Volkov (JIRA)