Author: smukhina Date: 2009-03-11 12:09:28 -0400 (Wed, 11 Mar 2009) New Revision: 14172 Modified: branches/jbosstools-3.0.x/smooks/docs/reference/en/master_output.xml Log: https://jira.jboss.org/jira/browse/JBDS-655 updated master_output files for all release smooks guide of 3.3.0 are added Modified: branches/jbosstools-3.0.x/smooks/docs/reference/en/master_output.xml =================================================================== --- branches/jbosstools-3.0.x/smooks/docs/reference/en/master_output.xml 2009-03-11 16:04:53 UTC (rev 14171) +++ branches/jbosstools-3.0.x/smooks/docs/reference/en/master_output.xml 2009-03-11 16:09:28 UTC (rev 14172) @@ -8,895 +8,898 @@ <!ENTITY smooksformeditor_graphicaltab SYSTEM "modules/smooksformeditor_graphicalpage.xml"> <!ENTITY smooksformeditor_configurationtab SYSTEM "modules/smooksformeditor_configurationpage.xml"> <!ENTITY smooksformeditor_sourcetab SYSTEM "modules/smooksformeditor_sourcepage.xml"> -]><book xmlns:diffmk="http://diffmk.sf.net/ns/diff"> - - <bookinfo> - - <title>Smooks Dev Tools Reference Guide</title> - <author> - <firstname>Xue(Dart)</firstname> - <surname>Peng</surname> - </author> - - <pubdate>November 2008</pubdate> - <copyright> - <year><diffmk:wrapper diffmk:change="changed">2009</diffmk:wrapper></year> - <holder><diffmk:wrapper diffmk:change="changed">JBoss, a division of Red Hat</diffmk:wrapper></holder> - </copyright> - <releaseinfo><diffmk:wrapper diffmk:change="changed"> - Version: 1.0.0.GA - </diffmk:wrapper></releaseinfo> - - <abstract> - <title></title> - <para> - <ulink url="http://download.jboss.org/jbosstools/nightly-docs/en/smooks/pdf... version</ulink> - </para> - </abstract> - - - </bookinfo> - <toc></toc> - -<chapter id="introduction" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/introduction.xml"> - <?dbhtml filename="introduction.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - </keywordset> - </chapterinfo> - <title>Introduction</title> - <section> - <title>What is Smooks?</title> - - <para><property moreinfo="none">Smooks</property> is a Java Framework/Engine for processing XML and non XML - data (CSV, EDI, Java, JSON etc).</para> - <para></para> - <para> - <orderedlist continuation="restarts" inheritnum="inherit" numeration="upperroman"> - <listitem> - <para><emphasis role="bold">Transformation</emphasis>: Perform a wide range of - Data Transforms. Supports many different Source and Result types - -XML/CSV/EDI/Java/JSON to XML/CSV/EDI/Java/JSON.</para> - </listitem> - <listitem> - <para><emphasis role="bold">Java Binding</emphasis>: Bind into a Java Object - Model from any data source (CSV, EDI, XML, Java, JSON etc). </para> - </listitem> - - <listitem> - <para><emphasis role="bold">Huge Message Processing</emphasis>: Process huge - messages (GBs) - Split, Transform and Route message fragments to JMS, File, - Database etc destinations. Route multiple message formats to multiple - destinations in a single pass over a message. </para> - </listitem> - - <listitem> - <para><emphasis role="bold">Message Enrichment</emphasis>: Enrich a message with - data from a Database, or other Datasources. </para> - </listitem> - - <listitem> - <para><emphasis role="bold">Combine</emphasis>: Combine the above features in - different ways e.g. add Message Enrichment as part of a Splitting and - Routing process. </para> - </listitem> - </orderedlist> - </para> - <figure float="0"> - <title>Smooks</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/introduction/introduction1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para> For More informations about <property moreinfo="none">Smooks</property>, please visit <ulink url="http://www.smooks.org">Smooks official site</ulink>.</para> - </section> - <section> - <title>What is Smooks dev tools?</title> - - <para>Smooks dev tools is a set of graphical tools for editing Smooks configuration file - base on Eclipse.</para> - <figure float="0"> - <title>Smooks form editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/introduction/introduction2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section> - <title>How to install Smooks dev tools?</title> - - <para> The Smooks dev tools was included by the <property moreinfo="none">JBoss Tools</property> since 3.0.0 - Beta1 version. You can download the <property moreinfo="none">JBoss Tools</property> from <ulink url="http://www.jboss.org/tools/download/index.html">here<... - <para> Smooks dev tools (<property moreinfo="none">JBoss Tools</property>) run with the latest Eclipse and - other required plug-ins (GEF, EMF, etc.).</para> - <para> You should download the latest IDE for Java EE developers from this <ulink url="http://www.eclipse.org/downloads/">site</ulink>;. It contains many plug-ins ( - GEF, EMF, etc. ) required by Smooks dev tools. </para> - </section> -</chapter> - - -<chapter id="quickstart" role="updated" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/quick_start.xml" xreflabel="Quick Start"> - <?dbhtml filename="quick_start.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - <keyword>java</keyword> - </keywordset> - </chapterinfo> - <title>Quick Start</title> - <para> This "Quick Start" will show how to use the <property moreinfo="none">Smooks tools</property> to create/edit the Smooks - configuration file for Java2Java data transformation.</para> - <para> This chapter should give you a brief understanding of the <property moreinfo="none">Smooks dev tools</property>.</para> - <section> - <title>Download Smooks Java-to-Java Example</title> - <para> Visit <ulink url="http://www.smooks.org/documentation/documentation-smooks-1-1-x/... to download the "java-to-java" example project. </para> - <tip> - <title>Tip:</title> - - <para> The example project is base on Maven, you suggest you to create a new eclipse - Java project and copy the example code and .jar files from the example project paste - them into the eclipse Java project. </para> - </tip> - </section> - <section> - <title>Smooks Configuration File Wizard</title> - <para>Select the Smooks Java-to-Java example project what you created and right-click, - select the menu <emphasis><property moreinfo="none">New &gt; Other</property>,</emphasis> then find - <emphasis><property moreinfo="none">Smooks &gt; Smooks Configuration File</property>.</emphasis> - Click the <emphasis> - <property moreinfo="none">Next</property> - </emphasis> button. </para> - <figure float="0"> - <title>Selecting Smooks Configuration File Wizard</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>The first wizard page is a file path creation page. Select the <emphasis> - <property moreinfo="none">src</property> - </emphasis> folder to be the files container, and input the name - <emphasis><property moreinfo="none">newConfig.smooks</property>.</emphasis> Click - <emphasis><property moreinfo="none">Next</property>.</emphasis></para> - <figure float="0"> - <title>Choosing the configuration file container and the file name</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>The second wizard page is a transform data type choose page.</para> - <para> As the quick start introduces how to create/edit the Java-to-Java Smooks - configuration file, let's select the<emphasis> - <property moreinfo="none">Java-to-Java</property> - </emphasis> type as the source/target transform data type. </para> - - <figure float="0"> - <title>Selecting Data Type</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start3.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>On the next page you are prompted to choose the source data for transformation. - Let's select the <property moreinfo="none">Order</property> class from the example project as - the source JavaBean class.</para> - - <figure float="0"> - <title>Selecting the Source Data</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start4.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>Then the wizard page asks you to choose the target data for transformation. We select - the <property moreinfo="none">ListOrder</property> class as the target JavaBean class.</para> - <figure float="0"> - <title>Selecting the Target Data</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start5.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para></para> - - <tip> - <title>Tip:</title> - <para>You can omit two these steps and just press - <emphasis><property moreinfo="none">Finish</property>.</emphasis> This will open the empty - Smooks Configuration file. It's possible to <link linkend="graphicaleditor_datalink">select source/target data</link> afterwards - in the Smooks Graph editor.</para> - </tip> - </section> - <section id="quickstart_formeditor"> - <title>Smooks Editor</title> - - <para>When all the wizard steps are passed, a new Smooks Configuration file is created and - the <property moreinfo="none">Smooks Editor</property> will be opened automatically:</para> - <figure float="0"> - <title>Smooks Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start6.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para> This editor contains several parts: <table> - <title>The Smooks Editor Parts</title> - <tgroup cols="2"> - - <colspec align="left" colnum="1" colwidth="1*"></colspec> - <colspec colnum="2" colwidth="5*"></colspec> - - <thead> - <row> - <entry>Editor feature</entry> - <entry>Functionality</entry> - </row> - </thead> - - <tbody> - - <row> - <entry> - <para>Problems area</para> - </entry> - <entry> - <para>If there are any errors when you are editing the file, the - Problems area will display them</para> - </entry> - </row> - - <row> - <entry> - <para>Source data tree</para> - </entry> - <entry> - <para>The tree will display the structure of transformed source - data</para> - </entry> - </row> - - <row> - <entry> - <para>Target data tree</para> - </entry> - <entry> - <para>The tree will display the structure of transformed target - data</para> - </entry> - </row> - - <row> - <entry> - <para>Mapping graphical area</para> - </entry> - <entry> - <para>Show the data mapping connection lines</para> - </entry> - </row> - - <row> - <entry> - <para>Source/Target data selection links</para> - </entry> - <entry> - <para>Click the link, and <link linkend="graphicaleditor_datalink">Data Selection wizard</link> will be opened helping you to - choose the source/target data</para> - </entry> - </row> - </tbody> - </tgroup> - </table> - </para> - </section> - - <section id="graphicaleditor_datalink"> - <title>Choosing the Source/Target Data</title> - - <para>To choose the transform data you should make use of the data selection links:</para> - - <itemizedlist> - <listitem> - <para><emphasis> - <property moreinfo="none">Source Select</property> - </emphasis> for selecting source data</para> - </listitem> - - <listitem> - <para><emphasis> - <property moreinfo="none">Target Select</property> - </emphasis> for selecting target data</para> - </listitem> - </itemizedlist> - - <para>After clicking the link the <property moreinfo="none">Data Type Selection wizard</property> will be - opened, and there are two data types on the list: Java and XML.</para> - <note> - <title>Note</title> - <para> There will be more and more data types on the list as the development went on. - </para> - </note> - - <figure float="0"> - <title>Data Type Wizard</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start7.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>Select the <emphasis> - <property moreinfo="none">Java</property> - </emphasis> data type and click <emphasis><property moreinfo="none">Next</property>,</emphasis> you will - see the JavaBean class selection page:</para> - - <figure float="0"> - <title>JavaBean Data Selection</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start8.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>When you select all the necessary java classes, click <emphasis> - <property moreinfo="none">Finish</property> - </emphasis> and the structure of the java class will be displayed on the source/target - data tree.</para> - <figure float="0"> - <title>Displaying the Structure of the Transformed Data</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start9.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - - <section id="quickstart_mapping"> - <title>Mapping</title> - - <para> As you see, the source/target data tree displays the structure of the java class. </para> - <para>How to map it?</para> - - <para>First, you should know what to transform:</para> - - <orderedlist continuation="restarts" inheritnum="inherit" numeration="loweralpha"> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"customerName"</property> - </emphasis> property of the <property moreinfo="none">Order#header</property> to the <emphasis> - <property moreinfo="none">"customerName"</property> - </emphasis> property of <property moreinfo="none">LineOrder</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"customerNumber"</property> - </emphasis> property of the <property moreinfo="none">Order#header</property> to the <emphasis> - <property moreinfo="none">"customerId"</property> - </emphasis> property of <property moreinfo="none">LineOrder</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"price"</property> - </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> - <property moreinfo="none">"unitPrice"</property> - </emphasis> property of <property moreinfo="none">LineItem</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"productId"</property> - </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> - <property moreinfo="none">"productCode"</property> - </emphasis> property of <property moreinfo="none">LineItem</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"quantity"</property> - </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> - <property moreinfo="none">"unitQuantity"</property> - </emphasis> property of <property moreinfo="none">LineItem</property>.</para> - </listitem> - </orderedlist> - - <para> Make sense?</para> - <para> OK, let's select the <emphasis> - <property moreinfo="none">"customerName"</property> - </emphasis> item of the <emphasis> - <property moreinfo="none">"header"</property> - </emphasis> item on the source data tree and start to drag it. When the drag item - crosses the Mapping graphical area, you will see a connection line. Drop the item onto - the <emphasis> - <property moreinfo="none">"customerName"</property> - </emphasis> of the <property moreinfo="none">LineOrder</property> on the target data - view.</para> - <para> Now a dialog is opened asking you to connect the root node:</para> - - <figure float="0"> - <title>Dialog Asking You to Connect to the Root Nodes</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start10.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para> Please, click <emphasis> - <property moreinfo="none">Yes</property> - </emphasis> to connect the root node. If you don't do that, this dialog will be - opened again when you connect other nodes.</para> - <note> - <title>Note:</title> - <para>Please, remember that: The root nodes of the source data and target data *MUST* be - connected.</para> - <para>This rule is not only for Java-to-Java, but the same is also relevant for - XML-to-Java </para> - </note> - <para> Now let's do the same operation with the <emphasis> - <property moreinfo="none">"customerNumber"</property>,</emphasis> that is what you - should see:</para> - <figure float="0"> - <title>Correctly Mapping Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start11.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>Next, you are going to bind the properties of the <property moreinfo="none">OrderItem</property> to - the properties of the <property moreinfo="none">LineItem</property>.</para> - <para>Select the <emphasis> - <property moreinfo="none">"price"</property> - </emphasis> and drag it onto the <emphasis> - <property moreinfo="none">"unitPrice"</property> - </emphasis> of the other side tree viewer. The Problems area will show an - error:</para> - <figure float="0"> - <title>Connection Error 1</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start12.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>How to deal with the error?</para> - <para>Please click the <emphasis> - <property moreinfo="none">Fix it</property></emphasis> link, a menu is popped-up with several - resolve methods on it.</para> - <figure float="0"> - <title>Fixing the Connection Error</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start13.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para> Select the first resolve method: <emphasis> - 'Connect the "OrderItem" to the - "LineItem" '.</emphasis> As the result the <emphasis> - <property moreinfo="none">"OrderItem"</property></emphasis> is connected with - the <emphasis> - <property moreinfo="none">"LineItem"</property>.</emphasis></para> - <para>But the notify message area still shows some other errors:</para> - <figure float="0"> - <title>Connection Error 2</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start14.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>OK, let's deal with the fire error. Click the <emphasis> - <property moreinfo="none">Fix it</property></emphasis> link and - select the first resolve method. The <emphasis> - <property moreinfo="none">"orderItems"</property></emphasis> is connected with - the <emphasis> - <property moreinfo="none">"lineItems"</property>.</emphasis></para> - - <tip> - <title>Tip:</title> - <para> Why does the error occur?</para> - <para> You will find that, if you only connect the property node without connecting the - parent node of the property, the "connection error" occurs.</para> - <para>The connection of the "price-to-unitPrice" is the - "Binding Connection", but it needs an "Instance Creation - Connection" - the connection of the - "OrderItem-to-LineItem".</para> - </tip> - <para> After that, connect <emphasis> - <property moreinfo="none">"quantity"</property></emphasis> to the <emphasis> - <property moreinfo="none">"unitQuantity"</property></emphasis> and <emphasis> - <property moreinfo="none">"productId"</property></emphasis> to the - <emphasis> - <property moreinfo="none">"productCode"</property>:</emphasis></para> - <figure float="0"> - <title>Complete Mapping</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start15.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>Now, you should save the file and the <property moreinfo="none">Smooks tools</property> will generate the correct - configuration file content.</para> - <para>OK, let run the test class: <property moreinfo="none">example.Main</property>. (Please, make sure that the Smooks engine - loads the correct configuration file).</para> - <para>Success!</para> - </section> -</chapter> - - -<chapter id="smooksformeditor_graphicaltab" role="updated" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_graphicalpage.xml" xreflabel="Smooks Graphical Editor Page"> - <?dbhtml filename="smooks_form_editor_graphicaltab.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - </keywordset> - </chapterinfo> - <title>Smooks Graphical Editor Page</title> - - <para>Smooks Graphical Editor page is one tab of the <property moreinfo="none">Smooks Editor</property>.</para> - <figure float="0"> - <title>Graphical Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/graph_editor/graph_editor1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para> This <property moreinfo="none">Graphical editor</property> allows you to perform drug/drop operations - with the nodes of transform data to map the source data to target data. </para> - <para> When you save the changes in the Graphical editor the correct Smooks Configuration file - content will be generated. </para> - <section> - - <title>Introducing the areas of graphical editor</title> - <para>Information on the topic could be found in the <link linkend="quickstart_formeditor">Quick Start/Smooks Editor</link> section.</para> - </section> - <section> - - <title>Load Source/Target Data</title> - <para> Click the links under the data view, the <property moreinfo="none">Data Type Selection wizard</property> page will be - shown.</para> - <figure float="0"> - <title>Data Type Selection Wizard Page</title> - <mediaobject> - <imageobject> - - <imagedata fileref="images/graph_editor/graph_editor2.png" scale="90"></imagedata> - - </imageobject> - </mediaobject> - </figure> - - <para> There are sets of transform data type on the wizard page, select one type and click - <emphasis><property moreinfo="none">Next</property>,</emphasis> the data source selection wizard - page will be shown.</para> - - <tip> - <title>Note:</title> - <para>For different data type, the Data source selection wizard are different too. - </para> - </tip> - <figure float="0"> - <title>Java Data Source Selection Wizard Page</title> - <mediaobject> - <imageobject> - - <imagedata fileref="images/graph_editor/graph_editor3.png" scale="90"></imagedata> - - </imageobject> - </mediaobject> - </figure> - - <figure float="0"> - <title>XML File Path Selection Wizard Page</title> - <mediaobject> - <imageobject> - - <imagedata fileref="images/graph_editor/graph_editor4.png" scale="90"></imagedata> - - </imageobject> - </mediaobject> - </figure> - - <para> When you finish the data selection (file path selection), click - <emphasis><property moreinfo="none">Finish</property>,</emphasis> the data view will display the - selected data structure.</para> - </section> - <section> - - <title>Using Graphical Editor for Mapping</title> - <para>To get information on the topic please, read the <link linkend="quickstart_mapping">Quick Start/Mapping</link> section. </para> - </section> - <section> - - <title>Error Messages</title> - <para>When you do any mapping operations, the <property moreinfo="none">Smooks tools</property> validate the - file content with "Mapping Logic". If there are any errors of the configuration file - content, error messages are shown in the <link linkend="quickstart_formeditor">Problems - area</link>.</para> - <para> Please, read the <link linkend="quickstart_mapping">Quick Start/Mapping</link> section to - find how to fix the errors.</para> - </section> - <section id="graphicalpage_propertiesview"> - <title>Properties View</title> - - <para> You can edit the properties of the connection lines with the <property moreinfo="none">Properties - view</property>.</para> - <para>Navigate to <emphasis><property moreinfo="none">Window &gt; Show View &gt; Other &gt; - Properties</property>,</emphasis> to open the <property moreinfo="none">Properties - view</property>.</para> - <para> When you select on the connection lines, the <property moreinfo="none">Properties view</property> - will show a set of section GUI for editing the properties of the connection line.</para> - <tip> - - <title>Tip:</title> - <para>This GUI on the <property moreinfo="none">Properties view</property> is displayed when the Smooks - Graphical editor is active, if not, the <property moreinfo="none">Properties view</property> - displays empty GUI.</para> - <para>If the source data type of the selected connection line is - "XML", the <property moreinfo="none">Properties view</property> shows an XML - Properties section GUI.</para> - <para>But if the source data type of the selected connection line is - "Java", the XML Properties section GUI isn't - displayed.</para> - <para>It means that if the source/target data type of the selected connection line is - different, the <property moreinfo="none">Properties view</property> shows different GUI.</para> - </tip> - <figure float="0"> - <title>JavaBean Properties Section</title> - <mediaobject> - <imageobject> - - <imagedata fileref="images/graph_editor/graph_editor5.png" scale="90"></imagedata> - - </imageobject> - </mediaobject> - </figure> - <figure float="0"> - <title>XML Properties Section</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/graph_editor/graph_editor6.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <figure float="0"> - <title>Mapping Properties Section</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/graph_editor/graph_editor7.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> -</chapter> - - -<chapter id="smooksformeditor_configurationtab" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_configurationpage.xml" xreflabel="Smooks Configuration Editor Page"> - <?dbhtml filename="smooks_form_editor_configurationtab.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - </keywordset> - </chapterinfo> - <title>Smooks Configuration Editor Page</title> - <para> Smooks Configuration Editor Page is one tab of the <property moreinfo="none">Smooks Editor</property>. </para> - <figure float="0"> - <title>Graphical Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para> You can add/edit/remove the <link linkend="configurationpage_datedecoder">Date - Decoder</link> on the Сonfiguration page of the <property moreinfo="none">Smooks Editor</property>. </para> - <para> The configuration also edit the <link linkend="configurationpage_parsetype">Smooks parse - type</link> and manage the <link linkend="configurationpage_importfile">Import - Files</link>.</para> - - <section id="configurationpage_parsetype"> - - <title>Smooks Parse Type</title> - <para>Open the <emphasis> - <property moreinfo="none">Other Configurations</property> - </emphasis> section, we will see there is a set of radio buttons:</para> - - <figure float="0"> - <title>Smooks Parse Types</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para> Select the radio button to change the Smooks parse type. </para> - </section> - <section id="configurationpage_importfile"> - - <title>Import File</title> - <para> Open the <emphasis> - <property moreinfo="none">Other Configurations</property> - </emphasis> section, there is an <emphasis> - <property moreinfo="none">Import Files</property> - </emphasis> list under the Smooks parse type buttons.</para> - - <figure float="0"> - <title>Import File</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>There are three buttons on the right side of the <emphasis> - <property moreinfo="none">File Import</property> - </emphasis> list. You can click those to add/edit/remove the import files.</para> - - <tip> - - <title>Tip:</title> - <para> If the import file dosen't exist, the image of the import file will change to - "Error Image". If you double-click the import file in the Import File list, the file - will be open with a new default editor. </para> - - </tip> - </section> - <section id="configurationpage_datedecoder"> - <title>Date Decoder Detail Page</title> - - <para>Date Decoder is a resourceConfig element in the Smooks configuration file. It - describes how to transform the "Date" type.</para> - <para> Click the <emphasis> - <property moreinfo="none">New</property> - </emphasis> button to open the <property moreinfo="none">New Resource Type wizard</property> - dialog.</para> - <figure float="0"> - <title>Resource Type Selection Wizard</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page4.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>There are several resource type on the list. Select the <emphasis> - <property moreinfo="none">Date Decoder</property> - </emphasis> and click the <emphasis> - <property moreinfo="none">Finish</property> - </emphasis> button, a new <emphasis> - <property moreinfo="none">Date Decoder</property> - </emphasis> item was added and shown on the resource type list.</para> - <para> There are several parameters in the <emphasis> - <property moreinfo="none">Date Decoder</property> - </emphasis> resourceConfig element:</para> - - <para> - - <itemizedlist> - <listitem> - <para>locale-language</para> - - </listitem> - - <listitem> - <para>format</para> - </listitem> - - <listitem> - <para>locale-country</para> - - </listitem> - </itemizedlist> - </para> - - <para> You can modify the parameters of the <emphasis> - <property moreinfo="none">Date Decoder</property></emphasis> item with the left detail page.</para> - - <figure float="0"> - <title>Date Decoder Detail Page</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page5.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para> When you defined a new <emphasis> - <property moreinfo="none">Date Decoder</property></emphasis>, they can use the <link linkend="graphicalpage_propertiesview">JavaBean Properties</link> GUI to set the - them to be the "Java type".</para> - - <!-- - <para> The XML fragment generated by Smooks tools for the "Date - Decoder": </para> <para> <programlisting> <![CDATA[<resource-config - selector="decoder:DateLong"> - <resource>org.milyn.javabean.decoders.DateDecoder</resource> <param - name="locale-language">en</param> <param name="format">yyy-MM-dd - HH:mm:ss</param> <param name="locale-country">IE</param> - </resource-config>]]> </programlisting> </para> - --> - </section> - <!-- - <section id="configurationpage_documenttype"> <title>Document Type - Detail Page</title> <para> </para> </section> <section - id="configurationpage_unhandleresourceconfig"> <title>Unhandle - ResourceConfig</title> </section> - --> -</chapter> - - -<chapter id="smooksformeditor_sourcetab" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_sourcepage.xml" xreflabel="Smooks Source Editor Page"> - <?dbhtml filename="smooks_form_editor_sourcetab.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - </keywordset> - </chapterinfo> - <title>Smooks Source Editor Page</title> - <section> - <title>XML Source Editor</title> - <para>You can use this editor to edit the Smooks Configuration file directly. </para> - <figure float="0"> - <title>Graphical Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/source_editor/source_editor1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section> - <title>Error Messages GUI</title> - <para>If the <property moreinfo="none">Smooks tools</property> can't understand the configuration - file or the configuration file is illegal (XML structure isn't right for Smooks - Configuration file, etc.), the error will be underlined.</para> - <figure float="0"> - <title>Graphical Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/source_editor/source_editor2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <!--note> - <title>Tip:</title> - <para> When the error message panel is displayed, other editors ( Graphical Editor, - Configuration Editor ) are disabled. </para> - <para> You can't edit the configuration file with other editors until file becomes - valid. </para> - </note--> - - </section> -</chapter> - -</book> +]><book xmlns:diffmk="http://diffmk.sf.net/ns/diff"> + + <bookinfo> + + <title>Smooks Dev Tools Reference Guide</title> + <author> + <firstname>Xue(Dart)</firstname> + <surname>Peng</surname> + </author> + + <pubdate>November 2008</pubdate> + <copyright> + <year>2008</year> + <holder>JBoss, a division of Red Hat Inc.</holder> + </copyright> + <releaseinfo><diffmk:wrapper diffmk:change="changed"> + Version: 1.0.0.CR1 + </diffmk:wrapper></releaseinfo> + + <abstract> + <title></title> + <para> + <ulink url="http://download.jboss.org/jbosstools/nightly-docs/en/smooks/pdf... version</ulink> + </para> + </abstract> + + + </bookinfo> + <toc></toc> + +<chapter id="introduction" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/introduction.xml"> + <?dbhtml filename="introduction.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + </keywordset> + </chapterinfo> + <title>Introduction</title> + <section diffmk:change="added"> + <title>What is Smooks?</title> + + <para><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> is a Java Framework/Engine for processing XML and non XML + data (CSV, EDI, Java, JSON etc).</diffmk:wrapper></para> + <para></para> + <para> + <orderedlist continuation="restarts" inheritnum="inherit" numeration="upperroman"> + <listitem> + <para><emphasis diffmk:change="added" role="bold"><diffmk:wrapper diffmk:change="added">Transformation</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added">: Perform a wide range of + Data Transforms. Supports many different Source and Result types + -XML/CSV/EDI/Java/JSON to XML/CSV/EDI/Java/JSON.</diffmk:wrapper></para> + </listitem> + <listitem> + <para><emphasis diffmk:change="added" role="bold"><diffmk:wrapper diffmk:change="added">Java Binding</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added">: Bind into a Java Object + Model from any data source (CSV, EDI, XML, Java, JSON etc). </diffmk:wrapper></para> + </listitem> + + <listitem> + <para><emphasis diffmk:change="added" role="bold"><diffmk:wrapper diffmk:change="added">Huge Message Processing</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added">: Process huge + messages (GBs) - Split, Transform and Route message fragments to JMS, File, + Database etc destinations. Route multiple message formats to multiple + destinations in a single pass over a message. </diffmk:wrapper></para> + </listitem> + + <listitem> + <para><emphasis diffmk:change="added" role="bold"><diffmk:wrapper diffmk:change="added">Message Enrichment</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added">: Enrich a message with + data from a Database, or other Datasources. </diffmk:wrapper></para> + </listitem> + + <listitem> + <para><emphasis diffmk:change="added" role="bold"><diffmk:wrapper diffmk:change="added">Combine</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added">: Combine the above features in + different ways e.g. add Message Enrichment as part of a Splitting and + Routing process. </diffmk:wrapper></para> + </listitem> + </orderedlist> + </para> + <figure float="0"> + <title>Smooks</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/introduction/introduction1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="added"> For More informations about </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">, please visit </diffmk:wrapper><ulink url="http://www.smooks.org">Smooks official site</ulink><diffmk:wrapper diffmk:change="changed">.</diffmk:wrapper></para> + </section> + <section diffmk:change="added"> + <title>What is Smooks dev tools?</title> + + <para><diffmk:wrapper diffmk:change="changed">Smooks dev tools is a set of graphical tools for editing Smooks configuration file + base on Eclipse.</diffmk:wrapper></para> + <figure float="0"> + <title>Smooks form editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/introduction/introduction2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section diffmk:change="added"> + <title>How to install Smooks dev tools?</title> + + <para><diffmk:wrapper diffmk:change="added"> The Smooks dev tools was included by the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">JBoss Tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> since 3.0.0 + Beta1 version. You can download the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">JBoss Tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> from </diffmk:wrapper><ulink url="http://www.jboss.org/tools/download/index.html"><dif... diffmk:change="changed">here</diffmk:wrapper></ulink><diffmk:wrapper diffmk:change="changed">.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added"> Smooks dev tools (</diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">JBoss Tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">) run with the latest Eclipse and + other required plug-ins (GEF, EMF, etc.).</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed"> You should download the latest IDE for Java EE developers from this </diffmk:wrapper><ulink url="http://www.eclipse.org/downloads/"><diffmk:wrapper diffmk:change="changed">site</diffmk:wrapper></ulink><diffmk:wrapper diffmk:change="changed">. It contains many plug-ins ( + GEF, EMF, etc. ) required by Smooks dev tools. </diffmk:wrapper></para> + </section> +</chapter> + + +<chapter id="quickstart" role="updated" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/quick_start.xml" xreflabel="Quick Start"> + <?dbhtml filename="quick_start.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + <keyword>java</keyword> + </keywordset> + </chapterinfo> + <title>Quick Start</title> + <para><diffmk:wrapper diffmk:change="added"> This "Quick Start" will show how to use the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to create/edit the Smooks + configuration file for Java2Java data transformation.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added"> This chapter should give you a brief understanding of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks dev tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + <section> + <title><diffmk:wrapper diffmk:change="changed">Download Smooks Java-to-Java Example</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="changed"> Visit </diffmk:wrapper><ulink url="http://www.smooks.org/documentation/documentation-smooks-1-1-x/... diffmk:change="changed"> to download the "java-to-java" example project. </diffmk:wrapper></para> + <tip> + <title>Tip:</title> + + <para><diffmk:wrapper diffmk:change="changed"> The example project is base on Maven, you suggest you to create a new eclipse + Java project and copy the example code and .jar files from the example project paste + them into the eclipse Java project. </diffmk:wrapper></para> + </tip> + </section> + <section> + <title><diffmk:wrapper diffmk:change="changed">Smooks Configuration File Wizard</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="added">Select the Smooks Java-to-Java example project what you created and right-click, + select the menu </diffmk:wrapper><emphasis diffmk:change="added"><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">New &gt; Other</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">,</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> then find + </diffmk:wrapper><emphasis diffmk:change="added"><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks &gt; Smooks Configuration File</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> + Click the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Next</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> button. </diffmk:wrapper></para> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Selecting Smooks Configuration File Wizard</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="added">The first wizard page is a file path creation page. Select the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">src</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> folder to be the files container, and input the name + </diffmk:wrapper><emphasis diffmk:change="added"><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">newConfig.smooks</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> Click + </diffmk:wrapper><emphasis diffmk:change="added"><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Next</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></emphasis></para> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Choosing the configuration file container and the file name</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>The second wizard page is a transform data type choose page.</para> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added"> As the quick start introduces how to create/edit the Java-to-Java Smooks + configuration file, let's select the</diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Java-to-Java</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> type as the source/target transform data type. </diffmk:wrapper></para> + + <figure diffmk:change="added" float="0"> + <title><diffmk:wrapper diffmk:change="changed">Selecting Data Type</diffmk:wrapper></title> + <mediaobject diffmk:change="added"> + <imageobject diffmk:change="added"> + <imagedata diffmk:change="added" fileref="images/quick_start/quick_start3.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added">On the next page you are prompted to choose the source data for transformation. + Let's select the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Order</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> class from the example project as + the source JavaBean class.</diffmk:wrapper></para> + + <figure diffmk:change="added" float="0"> + <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">Selecting the Source Data</diffmk:wrapper></title> + <mediaobject diffmk:change="added"> + <imageobject diffmk:change="added"> + <imagedata diffmk:change="added" fileref="images/quick_start/quick_start4.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Then the wizard page asks you to choose the target data for transformation. We select + the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">ListOrder</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> class as the target JavaBean class.</diffmk:wrapper></para> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Selecting the Target Data</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start5.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para diffmk:change="added"></para> + + <tip diffmk:change="added"> + <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">Tip:</diffmk:wrapper></title> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">You can omit two these steps and just press + </diffmk:wrapper><emphasis diffmk:change="added"><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Finish</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> This will open the empty + Smooks Configuration file. It's possible to </diffmk:wrapper><link diffmk:change="added" linkend="graphicaleditor_datalink"><diffmk:wrapper diffmk:change="added">select source/target data</diffmk:wrapper></link><diffmk:wrapper diffmk:change="added"> afterwards + in the Smooks Graph editor.</diffmk:wrapper></para> + </tip> + </section> + <section id="quickstart_formeditor"> + <title><diffmk:wrapper diffmk:change="changed">Smooks Editor</diffmk:wrapper></title> + + <para><diffmk:wrapper diffmk:change="added">When all the wizard steps are passed, a new Smooks Configuration file is created and + the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks Editor</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> will be opened automatically:</diffmk:wrapper></para> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Smooks Editor</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start6.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added"> This editor contains several parts: </diffmk:wrapper><table diffmk:change="added"> + <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">The Smooks Editor Parts</diffmk:wrapper></title> + <tgroup cols="2" diffmk:change="added"> + + <colspec align="left" colnum="1" colwidth="1*" diffmk:change="added"></colspec> + <colspec colnum="2" colwidth="5*" diffmk:change="added"></colspec> + + <thead diffmk:change="added"> + <row diffmk:change="added"> + <entry diffmk:change="added"><diffmk:wrapper diffmk:change="added">Editor feature</diffmk:wrapper></entry> + <entry diffmk:change="added"><diffmk:wrapper diffmk:change="added">Functionality</diffmk:wrapper></entry> + </row> + </thead> + + <tbody diffmk:change="added"> + + <row diffmk:change="added"> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Problems area</diffmk:wrapper></para> + </entry> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">If there are any errors when you are editing the file, the + Problems area will display them</diffmk:wrapper></para> + </entry> + </row> + + <row diffmk:change="added"> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Source data tree</diffmk:wrapper></para> + </entry> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">The tree will display the structure of transformed source + data</diffmk:wrapper></para> + </entry> + </row> + + <row diffmk:change="added"> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Target data tree</diffmk:wrapper></para> + </entry> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">The tree will display the structure of transformed target + data</diffmk:wrapper></para> + </entry> + </row> + + <row diffmk:change="added"> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Mapping graphical area</diffmk:wrapper></para> + </entry> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Show the data mapping connection lines</diffmk:wrapper></para> + </entry> + </row> + + <row diffmk:change="added"> + <entry diffmk:change="added"> + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Source/Target data selection links</diffmk:wrapper></para> + </entry> + <entry diffmk:change="added"> + <para><diffmk:wrapper diffmk:change="changed">Click the link, and </diffmk:wrapper><link linkend="graphicaleditor_datalink"><diffmk:wrapper diffmk:change="changed">Data Selection wizard</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed"> will be opened helping you to + choose the source/target data</diffmk:wrapper></para> + </entry> + </row> + </tbody> + </tgroup> + </table> + </para> + </section> + + <section id="graphicaleditor_datalink"> + <title><diffmk:wrapper diffmk:change="changed">Choosing the Source/Target Data</diffmk:wrapper></title> + + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">To choose the transform data you should make use of the data selection links:</diffmk:wrapper></para> + + <itemizedlist diffmk:change="added"> + <listitem diffmk:change="added"> + <para diffmk:change="added"><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Source Select</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> for selecting source data</diffmk:wrapper></para> + </listitem> + + <listitem diffmk:change="added"> + <para diffmk:change="added"><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Target Select</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> for selecting target data</diffmk:wrapper></para> + </listitem> + </itemizedlist> + + <para><diffmk:wrapper diffmk:change="added">After clicking the link the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Data Type Selection wizard</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> will be + opened, and there are two data types on the list: Java and XML.</diffmk:wrapper></para> + <note diffmk:change="added"> + <title>Note</title> + <para><diffmk:wrapper diffmk:change="changed"> There will be more and more data types on the list as the development went on. + </diffmk:wrapper></para> + </note> + + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Data Type Wizard</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start7.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added">Select the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Java</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> data type and click </diffmk:wrapper><emphasis diffmk:change="added"><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Next</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">,</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> you will + see the JavaBean class selection page:</diffmk:wrapper></para> + + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">JavaBean Data Selection</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start8.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added">When you select all the necessary java classes, click </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Finish</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> and the structure of the java class will be displayed on the source/target + data tree.</diffmk:wrapper></para> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Displaying the Structure of the Transformed Data</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start9.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + + <section id="quickstart_mapping"> + <title>Mapping</title> + + <para><diffmk:wrapper diffmk:change="changed"> As you see, the source/target data tree displays the structure of the java class. </diffmk:wrapper></para> + <para>How to map it?</para> + + <para><diffmk:wrapper diffmk:change="added">First, you should know what to transform:</diffmk:wrapper></para> + + <orderedlist continuation="restarts" inheritnum="inherit" numeration="loweralpha"> + <listitem> + <para><diffmk:wrapper diffmk:change="added">Bind the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"customerName"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Order#header</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"customerName"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineOrder</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + </listitem> + <listitem> + <para><diffmk:wrapper diffmk:change="added">Bind the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"customerNumber"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Order#header</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"customerId"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineOrder</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + </listitem> + <listitem> + <para><diffmk:wrapper diffmk:change="added">Bind the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"price"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">OrderItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"unitPrice"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + </listitem> + <listitem> + <para><diffmk:wrapper diffmk:change="added">Bind the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"productId"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">OrderItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"productCode"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + </listitem> + <listitem> + <para><diffmk:wrapper diffmk:change="added">Bind the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"quantity"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">OrderItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"unitQuantity"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> property of </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + </listitem> + </orderedlist> + + <para><diffmk:wrapper diffmk:change="changed"> Make sense?</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added"> OK, let's select the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"customerName"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> item of the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"header"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> item on the source data tree and start to drag it. When the drag item + crosses the Mapping graphical area, you will see a connection line. Drop the item onto + the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"customerName"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineOrder</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> on the target data + view.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed"> Now a dialog is opened asking you to connect the root node:</diffmk:wrapper></para> + + <figure float="0"> + <title>Dialog Asking You to Connect to the Root Nodes</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start10.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="added"> Please, click </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Yes</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> to connect the root node. If you don't do that, this dialog will be + opened again when you connect other nodes.</diffmk:wrapper></para> + <note diffmk:change="added"> + <title><diffmk:wrapper diffmk:change="changed">Note:</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="changed">Please, remember that: The root nodes of the source data and target data *MUST* be + connected.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed">This rule is not only for Java-to-Java, but the same is also relevant for + XML-to-Java </diffmk:wrapper></para> + </note> + <para><diffmk:wrapper diffmk:change="added"> Now let's do the same operation with the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"customerNumber"</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">,</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> that is what you + should see:</diffmk:wrapper></para> + <figure float="0"> + <title>Correctly Mapping Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start11.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="added">Next, you are going to bind the properties of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">OrderItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to + the properties of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineItem</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added">Select the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"price"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> and drag it onto the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"unitPrice"</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> of the other side tree viewer. The Problems area will show an + error:</diffmk:wrapper></para> + <figure float="0"> + <title>Connection Error 1</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start12.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="changed">How to deal with the error?</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added">Please click the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Fix it</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> link, a menu is popped-up with several + resolve methods on it.</diffmk:wrapper></para> + <figure diffmk:change="added" float="0"> + <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">Fixing the Connection Error</diffmk:wrapper></title> + <mediaobject diffmk:change="added"> + <imageobject diffmk:change="added"> + <imagedata diffmk:change="added" fileref="images/quick_start/quick_start13.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="added"> Select the first resolve method: </diffmk:wrapper><emphasis diffmk:change="added"><diffmk:wrapper diffmk:change="added"> + 'Connect the "OrderItem" to the + "LineItem" '.</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> As the result the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"OrderItem"</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> is connected with + the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"LineItem"</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></emphasis></para> + <para><diffmk:wrapper diffmk:change="changed">But the notify message area still shows some other errors:</diffmk:wrapper></para> + <figure float="0"> + <title>Connection Error 2</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start14.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="added">OK, let's deal with the fire error. Click the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Fix it</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> link and + select the first resolve method. The </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"orderItems"</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> is connected with + the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"lineItems"</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></emphasis></para> + + <tip> + <title><diffmk:wrapper diffmk:change="changed">Tip:</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="changed"> Why does the error occur?</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed"> You will find that, if you only connect the property node without connecting the + parent node of the property, the "connection error" occurs.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed">The connection of the "price-to-unitPrice" is the + "Binding Connection", but it needs an "Instance Creation + Connection" - the connection of the + "OrderItem-to-LineItem".</diffmk:wrapper></para> + </tip> + <para><diffmk:wrapper diffmk:change="added"> After that, connect </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"quantity"</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> to the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"unitQuantity"</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> and </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"productId"</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> to the + </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">"productCode"</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">:</diffmk:wrapper></emphasis></para> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Complete Mapping</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start15.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="added">Now, you should save the file and the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> will generate the correct + configuration file content.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added">OK, let run the test class: </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">example.Main</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">. (Please, make sure that the Smooks engine + loads the correct configuration file).</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed">Success!</diffmk:wrapper></para> + </section> +</chapter> + + +<chapter id="smooksformeditor_graphicaltab" role="updated" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_graphicalpage.xml" xreflabel="Smooks Graphical Editor Page"> + <?dbhtml filename="smooks_form_editor_graphicaltab.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + </keywordset> + </chapterinfo> + <title>Smooks Graphical Editor Page</title> + + <para><diffmk:wrapper diffmk:change="added">Smooks Graphical Editor page is one tab of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks Editor</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + <figure float="0"> + <title>Graphical Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/graph_editor/graph_editor1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added"> This </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Graphical editor</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> allows you to perform drug/drop operations + with the nodes of transform data to map the source data to target data. </diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed"> When you save the changes in the Graphical editor the correct Smooks Configuration file + content will be generated. </diffmk:wrapper></para> + <section> + + <title><diffmk:wrapper diffmk:change="changed">Introducing the areas of graphical editor</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="changed">Information on the topic could be found in the </diffmk:wrapper><link linkend="quickstart_formeditor"><diffmk:wrapper diffmk:change="changed">Quick Start/Smooks Editor</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed"> section.</diffmk:wrapper></para> + </section> + <section> + + <title><diffmk:wrapper diffmk:change="changed">Load Source/Target Data</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="added"> Click the links under the data view, the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Data Type Selection wizard</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> page will be + shown.</diffmk:wrapper></para> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Data Type Selection Wizard Page</diffmk:wrapper></title> + <mediaobject> + <imageobject> + + <imagedata fileref="images/graph_editor/graph_editor2.png" scale="90"/> + + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added"> There are sets of transform data type on the wizard page, select one type and click + </diffmk:wrapper><emphasis diffmk:change="added"><property moreinfo="none">Next</property><diffmk:wrapper diffmk:change="added">,</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> the data source selection wizard + page will be shown.</diffmk:wrapper></para> + + <tip> + <title><diffmk:wrapper diffmk:change="changed">Note:</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="changed">For different data type, the Data source selection wizard are different too. + </diffmk:wrapper></para> + </tip> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Java Data Source Selection Wizard Page</diffmk:wrapper></title> + <mediaobject> + <imageobject> + + <imagedata fileref="images/graph_editor/graph_editor3.png" scale="90"/> + + </imageobject> + </mediaobject> + </figure> + + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">XML File Path Selection Wizard Page</diffmk:wrapper></title> + <mediaobject> + <imageobject> + + <imagedata fileref="images/graph_editor/graph_editor4.png" scale="90"/> + + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added"> When you finish the data selection (file path selection), click + </diffmk:wrapper><emphasis diffmk:change="added"><property moreinfo="none">Finish</property><diffmk:wrapper diffmk:change="added">,</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> the data view will display the + selected data structure.</diffmk:wrapper></para> + </section> + <section> + + <title><diffmk:wrapper diffmk:change="changed">Using Graphical Editor for Mapping</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="changed">To get information on the topic please, read the </diffmk:wrapper><link linkend="quickstart_mapping"><diffmk:wrapper diffmk:change="changed">Quick Start/Mapping</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed"> section. </diffmk:wrapper></para> + </section> + <section> + + <title><diffmk:wrapper diffmk:change="changed">Error Messages</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="added">When you do any mapping operations, the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> validate the + file content with "Mapping Logic". If there are any errors of the configuration file + content, error messages are shown in the </diffmk:wrapper><link linkend="quickstart_formeditor"><diffmk:wrapper diffmk:change="changed">Problems + area</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed">.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed"> Please, read the </diffmk:wrapper><link linkend="quickstart_mapping"><diffmk:wrapper diffmk:change="changed">Quick Start/Mapping</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed"> section to + find how to fix the errors.</diffmk:wrapper></para> + </section> + <section id="graphicalpage_propertiesview"> + <title><diffmk:wrapper diffmk:change="changed">Properties View</diffmk:wrapper></title> + + <para><diffmk:wrapper diffmk:change="added"> You can edit the properties of the connection lines with the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Properties + view</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added">Navigate to </diffmk:wrapper><emphasis diffmk:change="added"><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Window &gt; Show View &gt; Other &gt; + Properties</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">,</diffmk:wrapper></emphasis><diffmk:wrapper diffmk:change="added"> to open the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Properties + view</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added"> When you select on the connection lines, the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Properties view</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> + will show a set of section GUI for editing the properties of the connection line.</diffmk:wrapper></para> + <tip> + + <title><diffmk:wrapper diffmk:change="changed">Tip:</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="added">This GUI on the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Properties view</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> is displayed when the Smooks + Graphical editor is active, if not, the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Properties view</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> + displays empty GUI.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added">If the source data type of the selected connection line is + "XML", the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Properties view</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> shows an XML + Properties section GUI.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed">But if the source data type of the selected connection line is + "Java", the XML Properties section GUI isn't + displayed.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added">It means that if the source/target data type of the selected connection line is + different, the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Properties view</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> shows different GUI.</diffmk:wrapper></para> + </tip> + <figure float="0"> + <title>JavaBean Properties Section</title> + <mediaobject> + <imageobject> + + <imagedata fileref="images/graph_editor/graph_editor5.png" scale="90"/> + + </imageobject> + </mediaobject> + </figure> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">XML Properties Section</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/graph_editor/graph_editor6.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Mapping Properties Section</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/graph_editor/graph_editor7.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + + + +</chapter> +<chapter id="smooksformeditor_configurationtab" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_configurationpage.xml" xreflabel="Smooks Configuration Editor Page"> + <?dbhtml filename="smooks_form_editor_configurationtab.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + </keywordset> + </chapterinfo> + <title>Smooks Configuration Editor Page</title> + <para><diffmk:wrapper diffmk:change="added"> Smooks Configuration Editor Page is one tab of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks Editor</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">. </diffmk:wrapper></para> + <figure float="0"> + <title>Graphical Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="changed"> You can add/edit/remove the </diffmk:wrapper><link linkend="configurationpage_datedecoder"><diffmk:wrapper diffmk:change="changed">Date + Decoder</diffmk:wrapper></link><diffmk:wrapper diffmk:change="added"> on the Сonfiguration page of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks Editor</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">. </diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="changed"> The configuration also edit the </diffmk:wrapper><link linkend="configurationpage_parsetype"><diffmk:wrapper diffmk:change="changed">Smooks parse + type</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed"> and manage the </diffmk:wrapper><link linkend="configurationpage_importfile"><diffmk:wrapper diffmk:change="changed">Import + Files</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed">.</diffmk:wrapper></para> + + <section id="configurationpage_parsetype"> + + <title><diffmk:wrapper diffmk:change="changed">Smooks Parse Type</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="added">Open the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Other Configurations</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> section, we will see there is a set of radio buttons:</diffmk:wrapper></para> + + <figure float="0"> + <title><diffmk:wrapper diffmk:change="changed">Smooks Parse Types</diffmk:wrapper></title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="changed"> Select the radio button to change the Smooks parse type. </diffmk:wrapper></para> + </section> + <section id="configurationpage_importfile"> + + <title><diffmk:wrapper diffmk:change="changed">Import File</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="added"> Open the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Other Configurations</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> section, there is an </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Import Files</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> list under the Smooks parse type buttons.</diffmk:wrapper></para> + + <figure float="0"> + <title>Import File</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added">There are three buttons on the right side of the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">File Import</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> list. You can click those to add/edit/remove the import files.</diffmk:wrapper></para> + + <tip> + + <title><diffmk:wrapper diffmk:change="changed">Tip:</diffmk:wrapper></title> + <para><diffmk:wrapper diffmk:change="changed"> If the import file dosen't exist, the image of the import file will change to + "Error Image". If you double-click the import file in the Import File list, the file + will be open with a new default editor. </diffmk:wrapper></para> + + </tip> + </section> + <section id="configurationpage_datedecoder"> + <title>Date Decoder Detail Page</title> + + <para><diffmk:wrapper diffmk:change="changed">Date Decoder is a resourceConfig element in the Smooks configuration file. It + describes how to transform the "Date" type.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added"> Click the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">New</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> button to open the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">New Resource Type wizard</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> + dialog.</diffmk:wrapper></para> + <figure float="0"> + <title>Resource Type Selection Wizard</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page4.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added">There are several resource type on the list. Select the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Date Decoder</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> and click the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Finish</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> button, a new </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Date Decoder</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> item was added and shown on the resource type list.</diffmk:wrapper></para> + <para><diffmk:wrapper diffmk:change="added"> There are several parameters in the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Date Decoder</diffmk:wrapper></property> + </emphasis><diffmk:wrapper diffmk:change="added"> resourceConfig element:</diffmk:wrapper></para> + + <para> + + <itemizedlist diffmk:change="added"> + <listitem> + <para>locale-language</para> + + </listitem> + + <listitem> + <para>format</para> + </listitem> + + <listitem> + <para>locale-country</para> + + </listitem> + </itemizedlist> + </para> + + <para><diffmk:wrapper diffmk:change="added"> You can modify the parameters of the </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Date Decoder</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> item with the left detail page.</diffmk:wrapper></para> + + <figure float="0"> + <title>Date Decoder Detail Page</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page5.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="added"> When you defined a new </diffmk:wrapper><emphasis diffmk:change="added"> + <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Date Decoder</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">, they can use the </diffmk:wrapper><link linkend="graphicalpage_propertiesview"><diffmk:wrapper diffmk:change="changed">JavaBean Properties</diffmk:wrapper></link><diffmk:wrapper diffmk:change="changed"> GUI to set the + them to be the "Java type".</diffmk:wrapper></para> + + <!-- + <para> The XML fragment generated by Smooks tools for the "Date + Decoder": </para> <para> <programlisting> <![CDATA[<resource-config + selector="decoder:DateLong"> + <resource>org.milyn.javabean.decoders.DateDecoder</resource> <param + name="locale-language">en</param> <param name="format">yyy-MM-dd + HH:mm:ss</param> <param name="locale-country">IE</param> + </resource-config>]]> </programlisting> </para> + --> + </section> + <!-- + <section id="configurationpage_documenttype"> <title>Document Type + Detail Page</title> <para> </para> </section> <section + id="configurationpage_unhandleresourceconfig"> <title>Unhandle + ResourceConfig</title> </section> + --> + + + +</chapter> +<chapter id="smooksformeditor_sourcetab" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_sourcepage.xml" xreflabel="Smooks Source Editor Page"> + <?dbhtml filename="smooks_form_editor_sourcetab.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + </keywordset> + </chapterinfo> + <title>Smooks Source Editor Page</title> + <section> + <title>XML Source Editor</title> + <para><diffmk:wrapper diffmk:change="changed">You can use this editor to edit the Smooks Configuration file directly. </diffmk:wrapper></para> + <figure float="0"> + <title>Graphical Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/source_editor/source_editor1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section> + <title>Error Messages GUI</title> + <para><diffmk:wrapper diffmk:change="added">If the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks tools</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> can't understand the configuration + file or the configuration file is illegal (XML structure isn't right for Smooks + Configuration file, etc.), the error will be underlined.</diffmk:wrapper></para> + <figure float="0"> + <title>Graphical Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/source_editor/source_editor2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <!--note> + <title>Tip:</title> + <para> When the error message panel is displayed, other editors ( Graphical Editor, + Configuration Editor ) are disabled. </para> + <para> You can't edit the configuration file with other editors until file becomes + valid. </para> + </note--> + + </section> + + +</chapter> +</book>