Hi Miguel :) I will dig more into it tomorrow but first thing that comes in mind (because I did this error in the beginning) is to be sure that the bundle you created in the apple portal is exactly the same as the one in your cordova app Seb On Sun, Mar 16, 2014 at 5:02 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > Hi all! > > As you know I managed - with a little help from my friends ;-) -to have > the push notifications working on Android. But with iOS, not the same luck > so far. What I've done: > > a) I created my development profile at Apple; > b) I uploaded the Certificates.p12 to the AeroGear Server; > c) I installed the devprof profile (the mobile provision file) in Xcode > (which says it's valid); > d) I inserted the variant ID and Secret on my phone code, like this (keys > are not real): > > if(device.platform=='iOS'){ > varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; > varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; > } else if (device.platform=='Android'){ > varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; > varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; > } > var pushConfig = { > senderID: "278695547260", // not relevant for Android anyway > pushServerURL: "https://aerogear-metalpush.rhcloud.com", > variantID: varID, > variantSecret: varSec, > alias: userid > } > > But nevertheless I can't register the device. I get this error: > > no valid aps-environment (the message is not in English, so I translate > it freely:"It was not found a valid aps-environment for the app") > > What can be wrong? > > Thanks > > Miguel > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev > _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Oops! A typo :-( I missed a "t": i wrote smardrifter :-( Once again, you got it!!! On Sun, Mar 16, 2014 at 4:22 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > Hi Seb, thanks for answering in a so short notice :-) > > Yes, I payed attention to that: com.redebiz.smartdrifter both places > > M > > > On Sun, Mar 16, 2014 at 4:11 PM, Sebastien Blanc <scm.blanc(a)gmail.com&gt;wrote: > >> Hi Miguel :) >> I will dig more into it tomorrow but first thing that comes in mind >> (because I did this error in the beginning) is to be sure that the bundle >> you created in the apple portal is exactly the same as the one in your >> cordova app >> Seb >> >> >> >> On Sun, Mar 16, 2014 at 5:02 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >> >>> Hi all! >>> >>> As you know I managed - with a little help from my friends ;-) -to >>> have the push notifications working on Android. But with iOS, not the same >>> luck so far. What I've done: >>> >>> a) I created my development profile at Apple; >>> b) I uploaded the Certificates.p12 to the AeroGear Server; >>> c) I installed the devprof profile (the mobile provision file) in Xcode >>> (which says it's valid); >>> d) I inserted the variant ID and Secret on my phone code, like this >>> (keys are not real): >>> >>> if(device.platform=='iOS'){ >>> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >>> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >>> } else if (device.platform=='Android'){ >>> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >>> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >>> } >>> var pushConfig = { >>> senderID: "278695547260", // not relevant for Android anyway >>> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >>> variantID: varID, >>> variantSecret: varSec, >>> alias: userid >>> } >>> >>> But nevertheless I can't register the device. I get this error: >>> >>> no valid aps-environment (the message is not in English, so I >>> translate it freely:"It was not found a valid aps-environment for the app") >>> >>> What can be wrong? >>> >>> Thanks >>> >>> Miguel >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> > > _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Yes it is! I don't know where you live but here is indeed a sunny / gorgeous and hot (24 celsius) day. Unfortunately only in the morning I could enjoy it. In the afternoon I returned to my unpleasant chores :-( On Sun, Mar 16, 2014 at 4:53 PM, Sebastien Blanc <scm.blanc(a)gmail.com&gt;wrote: > Glad I could help on this nice sunny sunday :) > > > > On Sun, Mar 16, 2014 at 5:25 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > >> Oops! A typo :-( >> >> I missed a "t": i wrote smardrifter :-( >> >> Once again, you got it!!! >> >> >> >> On Sun, Mar 16, 2014 at 4:22 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >> >>> Hi Seb, thanks for answering in a so short notice :-) >>> >>> Yes, I payed attention to that: com.redebiz.smartdrifter both places >>> >>> M >>> >>> >>> On Sun, Mar 16, 2014 at 4:11 PM, Sebastien Blanc <scm.blanc(a)gmail.com&gt;wrote: >>> >>>> Hi Miguel :) >>>> I will dig more into it tomorrow but first thing that comes in mind >>>> (because I did this error in the beginning) is to be sure that the bundle >>>> you created in the apple portal is exactly the same as the one in your >>>> cordova app >>>> Seb >>>> >>>> >>>> >>>> On Sun, Mar 16, 2014 at 5:02 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>>> >>>>> Hi all! >>>>> >>>>> As you know I managed - with a little help from my friends ;-) -to >>>>> have the push notifications working on Android. But with iOS, not the same >>>>> luck so far. What I've done: >>>>> >>>>> a) I created my development profile at Apple; >>>>> b) I uploaded the Certificates.p12 to the AeroGear Server; >>>>> c) I installed the devprof profile (the mobile provision file) in >>>>> Xcode (which says it's valid); >>>>> d) I inserted the variant ID and Secret on my phone code, like this >>>>> (keys are not real): >>>>> >>>>> if(device.platform=='iOS'){ >>>>> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >>>>> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >>>>> } else if (device.platform=='Android'){ >>>>> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >>>>> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >>>>> } >>>>> var pushConfig = { >>>>> senderID: "278695547260", // not relevant for Android anyway >>>>> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >>>>> variantID: varID, >>>>> variantSecret: varSec, >>>>> alias: userid >>>>> } >>>>> >>>>> But nevertheless I can't register the device. I get this error: >>>>> >>>>> no valid aps-environment (the message is not in English, so I >>>>> translate it freely:"It was not found a valid aps-environment for the app") >>>>> >>>>> What can be wrong? >>>>> >>>>> Thanks >>>>> >>>>> Miguel >>>>> >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>> >>>> >>>> >>>> _______________________________________________ >>>> aerogear-dev mailing list >>>> aerogear-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>> >>> >>> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> > > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev >

Does the app-id (bundle identifier) match the one which you created the SSL certificate for? Otherwise it is not valid to Apple -Matthias On Sunday, March 16, 2014, Miguel Lemos <miguel21op@gmail.com<javascript:_e(%7B%7D,'cvml','miguel21op@gmail.com');>> wrote: > Hi all! > > As you know I managed - with a little help from my friends ;-) -to have > the push notifications working on Android. But with iOS, not the same luck > so far. What I've done: > > a) I created my development profile at Apple; > b) I uploaded the Certificates.p12 to the AeroGear Server; > c) I installed the devprof profile (the mobile provision file) in Xcode > (which says it's valid); > d) I inserted the variant ID and Secret on my phone code, like this (keys > are not real): > > if(device.platform=='iOS'){ > varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; > varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; > } else if (device.platform=='Android'){ > varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; > varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; > } > var pushConfig = { > senderID: "278695547260", // not relevant for Android anyway > pushServerURL: "https://aerogear-metalpush.rhcloud.com", > variantID: varID, > variantSecret: varSec, > alias: userid > } > > But nevertheless I can't register the device. I get this error: > > no valid aps-environment (the message is not in English, so I translate > it freely:"It was not found a valid aps-environment for the app") > > What can be wrong? > > Thanks > > Miguel > -- Sent from Gmail Mobile

Just saw the rest of the thread :-) Glad it works! -Matthias > On Sunday, March 16, 2014, Matthias Wessendorf <matzew(a)apache.org&gt; wrote: > Does the app-id (bundle identifier) match the one which you created the SSL certificate for? > > Otherwise it is not valid to Apple > > -Matthias > >> On Sunday, March 16, 2014, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Hi all! >> >> As you know I managed - with a little help from my friends ;-) -to have the push notifications working on Android. But with iOS, not the same luck so far. What I've done: >> >> a) I created my development profile at Apple; >> b) I uploaded the Certificates.p12 to the AeroGear Server; >> c) I installed the devprof profile (the mobile provision file) in Xcode (which says it's valid); >> d) I inserted the variant ID and Secret on my phone code, like this (keys are not real): >> >> if(device.platform=='iOS'){ >> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >> } else if (device.platform=='Android'){ >> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >> } >> >> var pushConfig = { >> senderID: "278695547260", // not relevant for Android anyway >> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >> variantID: varID, >> variantSecret: varSec, >> alias: userid >> } >> >> But nevertheless I can't register the device. I get this error: >> >> no valid aps-environment (the message is not in English, so I translate it freely:"It was not found a valid aps-environment for the app") >> >> What can be wrong? >> >> Thanks >> >> Miguel > > > -- > Sent from Gmail Mobile -- Sent from Gmail Mobile _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Hi Miguel, Not sure what the problem is, but you could maybe try to debug it a bit. The easiest way is to start safari on your machine and on your device enable the web inspector ( Settings > Safari > Advanced ). Then in safari you can go to develop > “device name” then you can open the javascript console and see if there was an error of some kind. Also we just released a new version (0.0.3) that that fixes some bugs you could also try to update to that version by removing and adding the plugin in you cordova project. Hope this helps, Erik Jan > On 17 Mar,2014, at 10:53 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > > I have this problem now: in iPhone (the same code works just fine with Android) the event handler never triggers the alert message. > > If the app is running in the background I get the message in the status bar, the badge shows, but when I touch on it or if the app is in the foreground the alert box inside the app never shows. > > As I told you, the same code works just fine in Android. > > Meanwhile I noticed this odd thing in the Xcode debugger: even if the app is running in the background, when the push notification arrives it says a foreground message has arrived... > > Thanks > > M > > Enviado do meu iPhone > > No dia 16/03/2014, às 18:45, Matthias Wessendorf <matzew(a)apache.org&gt; escreveu: > >> Just saw the rest of the thread :-) >> >> Glad it works! >> >> -Matthias >> >>> On Sunday, March 16, 2014, Matthias Wessendorf <matzew(a)apache.org&gt; wrote: >>> Does the app-id (bundle identifier) match the one which you created the SSL certificate for? >>> >>> Otherwise it is not valid to Apple >>> >>> -Matthias >>> >>>> On Sunday, March 16, 2014, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>> Hi all! >>>> >>>> As you know I managed - with a little help from my friends ;-) -to have the push notifications working on Android. But with iOS, not the same luck so far. What I've done: >>>> >>>> a) I created my development profile at Apple; >>>> b) I uploaded the Certificates.p12 to the AeroGear Server; >>>> c) I installed the devprof profile (the mobile provision file) in Xcode (which says it's valid); >>>> d) I inserted the variant ID and Secret on my phone code, like this (keys are not real): >>>> >>>> if(device.platform=='iOS'){ >>>> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >>>> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >>>> } else if (device.platform=='Android'){ >>>> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >>>> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >>>> } >>>> >>>> var pushConfig = { >>>> senderID: "278695547260", // not relevant for Android anyway >>>> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >>>> variantID: varID, >>>> variantSecret: varSec, >>>> alias: userid >>>> } >>>> >>>> But nevertheless I can't register the device. I get this error: >>>> >>>> no valid aps-environment (the message is not in English, so I translate it freely:"It was not found a valid aps-environment for the app") >>>> >>>> What can be wrong? >>>> >>>> Thanks >>>> >>>> Miguel >>> >>> >>> -- >>> Sent from Gmail Mobile >> >> >> -- >> Sent from Gmail Mobile >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Hi Miguel, Not sure what the problem is, but you could maybe try to debug it a bit. The easiest way is to start safari on your machine and on your device enable the web inspector ( Settings > Safari > Advanced ). Then in safari you can go to develop > “device name” then you can open the javascript console and see if there was an error of some kind. Also we just released a new version (0.0.3) that that fixes some bugs you could also try to update to that version by removing and adding the plugin in you cordova project. Hope this helps, Erik Jan > On 17 Mar,2014, at 10:53 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > > I have this problem now: in iPhone (the same code works just fine with Android) the event handler never triggers the alert message. > > If the app is running in the background I get the message in the status bar, the badge shows, but when I touch on it or if the app is in the foreground the alert box inside the app never shows. > > As I told you, the same code works just fine in Android. > > Meanwhile I noticed this odd thing in the Xcode debugger: even if the app is running in the background, when the push notification arrives it says a foreground message has arrived... > > Thanks > > M > > Enviado do meu iPhone > > No dia 16/03/2014, às 18:45, Matthias Wessendorf <matzew(a)apache.org&gt; escreveu: > >> Just saw the rest of the thread :-) >> >> Glad it works! >> >> -Matthias >> >>> On Sunday, March 16, 2014, Matthias Wessendorf <matzew(a)apache.org&gt; wrote: >>> Does the app-id (bundle identifier) match the one which you created the SSL certificate for? >>> >>> Otherwise it is not valid to Apple >>> >>> -Matthias >>> >>>> On Sunday, March 16, 2014, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>> Hi all! >>>> >>>> As you know I managed - with a little help from my friends ;-) -to have the push notifications working on Android. But with iOS, not the same luck so far. What I've done: >>>> >>>> a) I created my development profile at Apple; >>>> b) I uploaded the Certificates.p12 to the AeroGear Server; >>>> c) I installed the devprof profile (the mobile provision file) in Xcode (which says it's valid); >>>> d) I inserted the variant ID and Secret on my phone code, like this (keys are not real): >>>> >>>> if(device.platform=='iOS'){ >>>> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >>>> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >>>> } else if (device.platform=='Android'){ >>>> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >>>> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >>>> } >>>> >>>> var pushConfig = { >>>> senderID: "278695547260", // not relevant for Android anyway >>>> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >>>> variantID: varID, >>>> variantSecret: varSec, >>>> alias: userid >>>> } >>>> >>>> But nevertheless I can't register the device. I get this error: >>>> >>>> no valid aps-environment (the message is not in English, so I translate it freely:"It was not found a valid aps-environment for the app") >>>> >>>> What can be wrong? >>>> >>>> Thanks >>>> >>>> Miguel >>> >>> >>> -- >>> Sent from Gmail Mobile >> >> >> -- >> Sent from Gmail Mobile >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Hi, That could be a problem, I think Xcode 5.1 doesn’t work with Cordova, there are some issue that will be fixed in 3.5 you might have to revert this update. As for the plugin update the javascript API has not change yet, but it will when we merge the simplification branch. Cheers, Erik Jan > On 17 Mar,2014, at 11:30 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > > Further info: I use Xcode 5.1, iOS 7.1 and Cordova 3.4 > > M > > > Enviado do meu iPhone > > No dia 17/03/2014, às 10:13, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: > >> Hi Miguel, >> >> Not sure what the problem is, but you could maybe try to debug it a bit. The easiest way is to start safari on your machine and on your device enable the web inspector ( Settings > Safari > Advanced ). Then in safari you can go to develop > “device name” then you can open the javascript console and see if there was an error of some kind. >> >> Also we just released a new version (0.0.3) that that fixes some bugs you could also try to update to that version by removing and adding the plugin in you cordova project. >> >> Hope this helps, >> Erik Jan >> >>> On 17 Mar,2014, at 10:53 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>> >>> I have this problem now: in iPhone (the same code works just fine with Android) the event handler never triggers the alert message. >>> >>> If the app is running in the background I get the message in the status bar, the badge shows, but when I touch on it or if the app is in the foreground the alert box inside the app never shows. >>> >>> As I told you, the same code works just fine in Android. >>> >>> Meanwhile I noticed this odd thing in the Xcode debugger: even if the app is running in the background, when the push notification arrives it says a foreground message has arrived... >>> >>> Thanks >>> >>> M >>> >>> Enviado do meu iPhone >>> >>> No dia 16/03/2014, às 18:45, Matthias Wessendorf <matzew(a)apache.org&gt; escreveu: >>> >>>> Just saw the rest of the thread :-) >>>> >>>> Glad it works! >>>> >>>> -Matthias >>>> >>>>> On Sunday, March 16, 2014, Matthias Wessendorf <matzew(a)apache.org&gt; wrote: >>>>> Does the app-id (bundle identifier) match the one which you created the SSL certificate for? >>>>> >>>>> Otherwise it is not valid to Apple >>>>> >>>>> -Matthias >>>>> >>>>>> On Sunday, March 16, 2014, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>>> Hi all! >>>>>> >>>>>> As you know I managed - with a little help from my friends ;-) -to have the push notifications working on Android. But with iOS, not the same luck so far. What I've done: >>>>>> >>>>>> a) I created my development profile at Apple; >>>>>> b) I uploaded the Certificates.p12 to the AeroGear Server; >>>>>> c) I installed the devprof profile (the mobile provision file) in Xcode (which says it's valid); >>>>>> d) I inserted the variant ID and Secret on my phone code, like this (keys are not real): >>>>>> >>>>>> if(device.platform=='iOS'){ >>>>>> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >>>>>> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >>>>>> } else if (device.platform=='Android'){ >>>>>> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >>>>>> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >>>>>> } >>>>>> >>>>>> var pushConfig = { >>>>>> senderID: "278695547260", // not relevant for Android anyway >>>>>> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >>>>>> variantID: varID, >>>>>> variantSecret: varSec, >>>>>> alias: userid >>>>>> } >>>>>> >>>>>> But nevertheless I can't register the device. I get this error: >>>>>> >>>>>> no valid aps-environment (the message is not in English, so I translate it freely:"It was not found a valid aps-environment for the app") >>>>>> >>>>>> What can be wrong? >>>>>> >>>>>> Thanks >>>>>> >>>>>> Miguel >>>>> >>>>> >>>>> -- >>>>> Sent from Gmail Mobile >>>> >>>> >>>> -- >>>> Sent from Gmail Mobile >>>> _______________________________________________ >>>> aerogear-dev mailing list >>>> aerogear-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Was this same set of code working well on iOS 7.0? Here is a listing of the issues associated with Cordova & XCode 5.1 http://shazronatadobe.wordpress.com/2014/03/12/xcode-5-1-and-cordova-ios/ I had to uninstall XCode 5.1 and reinstall 5.0 just to get the iOS Simulator working again. > On Mar 17, 2014, at 7:18 AM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > > No, it works with Cordova perfectly! There's no problem. It's only needed to manually update the compilation definitions. But if you're starting a new project, not even that problem exists. > > And those Aerogear warning messages already were present in XCode 5. > > Besides, if you update the phone to iOS 7.1, you must update Xcode accordingly. No way back possible. > > Enviado do meu iPhone > > No dia 17/03/2014, às 11:09, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: > >> Hi, >> >> That could be a problem, I think Xcode 5.1 doesn’t work with Cordova, there are some issue that will be fixed in 3.5 you might have to revert this update. As for the plugin update the javascript API has not change yet, but it will when we merge the simplification branch. >> >> Cheers, >> Erik Jan >> >>> On 17 Mar,2014, at 11:30 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>> >>> Further info: I use Xcode 5.1, iOS 7.1 and Cordova 3.4 >>> >>> M >>> >>> >>> Enviado do meu iPhone >>> >>> No dia 17/03/2014, às 10:13, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: >>> >>>> Hi Miguel, >>>> >>>> Not sure what the problem is, but you could maybe try to debug it a bit. The easiest way is to start safari on your machine and on your device enable the web inspector ( Settings > Safari > Advanced ). Then in safari you can go to develop > “device name” then you can open the javascript console and see if there was an error of some kind. >>>> >>>> Also we just released a new version (0.0.3) that that fixes some bugs you could also try to update to that version by removing and adding the plugin in you cordova project. >>>> >>>> Hope this helps, >>>> Erik Jan >>>> >>>>> On 17 Mar,2014, at 10:53 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>> >>>>> I have this problem now: in iPhone (the same code works just fine with Android) the event handler never triggers the alert message. >>>>> >>>>> If the app is running in the background I get the message in the status bar, the badge shows, but when I touch on it or if the app is in the foreground the alert box inside the app never shows. >>>>> >>>>> As I told you, the same code works just fine in Android. >>>>> >>>>> Meanwhile I noticed this odd thing in the Xcode debugger: even if the app is running in the background, when the push notification arrives it says a foreground message has arrived... >>>>> >>>>> Thanks >>>>> >>>>> M >>>>> >>>>> Enviado do meu iPhone >>>>> >>>>> No dia 16/03/2014, às 18:45, Matthias Wessendorf <matzew(a)apache.org&gt; escreveu: >>>>> >>>>>> Just saw the rest of the thread :-) >>>>>> >>>>>> Glad it works! >>>>>> >>>>>> -Matthias >>>>>> >>>>>>> On Sunday, March 16, 2014, Matthias Wessendorf <matzew(a)apache.org&gt; wrote: >>>>>>> Does the app-id (bundle identifier) match the one which you created the SSL certificate for? >>>>>>> >>>>>>> Otherwise it is not valid to Apple >>>>>>> >>>>>>> -Matthias >>>>>>> >>>>>>>> On Sunday, March 16, 2014, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>>>>> Hi all! >>>>>>>> >>>>>>>> As you know I managed - with a little help from my friends ;-) -to have the push notifications working on Android. But with iOS, not the same luck so far. What I've done: >>>>>>>> >>>>>>>> a) I created my development profile at Apple; >>>>>>>> b) I uploaded the Certificates.p12 to the AeroGear Server; >>>>>>>> c) I installed the devprof profile (the mobile provision file) in Xcode (which says it's valid); >>>>>>>> d) I inserted the variant ID and Secret on my phone code, like this (keys are not real): >>>>>>>> >>>>>>>> if(device.platform=='iOS'){ >>>>>>>> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >>>>>>>> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >>>>>>>> } else if (device.platform=='Android'){ >>>>>>>> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >>>>>>>> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >>>>>>>> } >>>>>>>> >>>>>>>> var pushConfig = { >>>>>>>> senderID: "278695547260", // not relevant for Android anyway >>>>>>>> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >>>>>>>> variantID: varID, >>>>>>>> variantSecret: varSec, >>>>>>>> alias: userid >>>>>>>> } >>>>>>>> >>>>>>>> But nevertheless I can't register the device. I get this error: >>>>>>>> >>>>>>>> no valid aps-environment (the message is not in English, so I translate it freely:"It was not found a valid aps-environment for the app") >>>>>>>> >>>>>>>> What can be wrong? >>>>>>>> >>>>>>>> Thanks >>>>>>>> >>>>>>>> Miguel >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Sent from Gmail Mobile >>>>>> >>>>>> >>>>>> -- >>>>>> Sent from Gmail Mobile >>>>>> _______________________________________________ >>>>>> aerogear-dev mailing list >>>>>> aerogear-dev(a)lists.jboss.org >>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>> >>>> _______________________________________________ >>>> aerogear-dev mailing list >>>> aerogear-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Yes, it was. And no: I'm telling you that Cordova 3.4 works fine for me with Xcode 5.1 My app and the installed plugins work the same way as before. I only had to change the compilation parameters. Do you want I send a video? ;)

Enviado do meu iPhone No dia 17/03/2014, às 12:32, Burr Sutter <bsutter(a)redhat.com&gt; escreveu: Was this same set of code working well on iOS 7.0? Here is a listing of the issues associated with Cordova & XCode 5.1 http://shazronatadobe.wordpress.com/2014/03/12/xcode-5-1-and-cordova-ios/ I had to uninstall XCode 5.1 and reinstall 5.0 just to get the iOS Simulator working again. On Mar 17, 2014, at 7:18 AM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: No, it works with Cordova perfectly! There's no problem. It's only needed to manually update the compilation definitions. But if you're starting a new project, not even that problem exists. And those Aerogear warning messages already were present in XCode 5. Besides, if you update the phone to iOS 7.1, you must update Xcode accordingly. No way back possible. Enviado do meu iPhone No dia 17/03/2014, às 11:09, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: Hi, That could be a problem, I think Xcode 5.1 doesn't work with Cordova, there are some issue that will be fixed in 3.5 you might have to revert this update. As for the plugin update the javascript API has not change yet, but it will when we merge the simplification branch. Cheers, Erik Jan On 17 Mar,2014, at 11:30 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: Further info: I use Xcode 5.1, iOS 7.1 and Cordova 3.4 M Enviado do meu iPhone No dia 17/03/2014, às 10:13, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: Hi Miguel, Not sure what the problem is, but you could maybe try to debug it a bit. The easiest way is to start safari on your machine and on your device enable the web inspector ( Settings > Safari > Advanced ). Then in safari you can go to develop > "device name" then you can open the javascript console and see if there was an error of some kind. Also we just released a new version (0.0.3) that that fixes some bugs you could also try to update to that version by removing and adding the plugin in you cordova project. Hope this helps, Erik Jan On 17 Mar,2014, at 10:53 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: I have this problem now: in iPhone (the same code works just fine with Android) the event handler never triggers the alert message. If the app is running in the background I get the message in the status bar, the badge shows, but when I touch on it or if the app is in the foreground the alert box inside the app never shows. As I told you, the same code works just fine in Android. Meanwhile I noticed this odd thing in the Xcode debugger: even if the app is running in the background, when the push notification arrives it says a foreground message has arrived... Thanks M Enviado do meu iPhone No dia 16/03/2014, às 18:45, Matthias Wessendorf <matzew(a)apache.org&gt; escreveu: Just saw the rest of the thread :-) Glad it works! -Matthias On Sunday, March 16, 2014, Matthias Wessendorf <matzew(a)apache.org&gt; wrote: > Does the app-id (bundle identifier) match the one which you created the > SSL certificate for? > > Otherwise it is not valid to Apple > > -Matthias > > On Sunday, March 16, 2014, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > >> Hi all! >> >> As you know I managed - with a little help from my friends ;-) -to have >> the push notifications working on Android. But with iOS, not the same luck >> so far. What I've done: >> >> a) I created my development profile at Apple; >> b) I uploaded the Certificates.p12 to the AeroGear Server; >> c) I installed the devprof profile (the mobile provision file) in Xcode >> (which says it's valid); >> d) I inserted the variant ID and Secret on my phone code, like this >> (keys are not real): >> >> if(device.platform=='iOS'){ >> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >> } else if (device.platform=='Android'){ >> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >> } >> var pushConfig = { >> senderID: "278695547260", // not relevant for Android anyway >> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >> variantID: varID, >> variantSecret: varSec, >> alias: userid >> } >> >> But nevertheless I can't register the device. I get this error: >> >> no valid aps-environment (the message is not in English, so I translate >> it freely:"It was not found a valid aps-environment for the app") >> >> What can be wrong? >> >> Thanks >> >> Miguel >> > > > -- > Sent from Gmail Mobile > -- Sent from Gmail Mobile _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Hi Erik! I could seat again in front of a Mac, and already found out what's going on. I managed to make a pop-up window appear when the notification arrives. I'll go through some more testings and afterwards I'll tell you precisely where the problem is coming from. On Mon, Mar 17, 2014 at 11:09 AM, Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: Hi, That could be a problem, I think Xcode 5.1 doesn’t work with Cordova, there are some issue that will be fixed in 3.5 you might have to revert this update. As for the plugin update the javascript API has not change yet, but it will when we merge the simplification branch. Cheers, Erik Jan On 17 Mar,2014, at 11:30 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > Further info: I use Xcode 5.1, iOS 7.1 and Cordova 3.4 > > M > > > Enviado do meu iPhone > > No dia 17/03/2014, às 10:13, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: > >> Hi Miguel, >> >> Not sure what the problem is, but you could maybe try to debug it a bit. The easiest way is to start safari on your machine and on your device enable the web inspector ( Settings > Safari > Advanced ). Then in safari you can go to develop > “device name” then you can open the javascript console and see if there was an error of some kind. >> >> Also we just released a new version (0.0.3) that that fixes some bugs you could also try to update to that version by removing and adding the plugin in you cordova project. >> >> Hope this helps, >> Erik Jan >> >> On 17 Mar,2014, at 10:53 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> >>> I have this problem now: in iPhone (the same code works just fine with Android) the event handler never triggers the alert message. >>> >>> If the app is running in the background I get the message in the status bar, the badge shows, but when I touch on it or if the app is in the foreground the alert box inside the app never shows. >>> >>> As I told you, the same code works just fine in Android. >>> >>> Meanwhile I noticed this odd thing in the Xcode debugger: even if the app is running in the background, when the push notification arrives it says a foreground message has arrived... >>> >>> Thanks >>> >>> M >>> >>> Enviado do meu iPhone >>> >>> No dia 16/03/2014, às 18:45, Matthias Wessendorf <matzew(a)apache.org&gt; escreveu: >>> >>>> Just saw the rest of the thread :-) >>>> >>>> Glad it works! >>>> >>>> -Matthias >>>> >>>> On Sunday, March 16, 2014, Matthias Wessendorf <matzew(a)apache.org&gt; wrote: >>>> Does the app-id (bundle identifier) match the one which you created the SSL certificate for? >>>> >>>> Otherwise it is not valid to Apple >>>> >>>> -Matthias >>>> >>>> On Sunday, March 16, 2014, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>> Hi all! >>>> >>>> As you know I managed - with a little help from my friends ;-) -to have the push notifications working on Android. But with iOS, not the same luck so far. What I've done: >>>> >>>> a) I created my development profile at Apple; >>>> b) I uploaded the Certificates.p12 to the AeroGear Server; >>>> c) I installed the devprof profile (the mobile provision file) in Xcode (which says it's valid); >>>> d) I inserted the variant ID and Secret on my phone code, like this (keys are not real): >>>> >>>> if(device.platform=='iOS'){ >>>> varID= "bb66d681-zabc-42cc-87f6-c27185c2389f"; >>>> varSec= "e66271f5-dd92-492d-bbac-83736f53e930"; >>>> } else if (device.platform=='Android'){ >>>> varID= "b438d657-5eef-4301-ba82-28c46cc3466f"; >>>> varSec= "150b5f99-z450-4edc-bdad-62dad284af2e"; >>>> } >>>> >>>> var pushConfig = { >>>> senderID: "278695547260", // not relevant for Android anyway >>>> pushServerURL: "https://aerogear-metalpush.rhcloud.com", >>>> variantID: varID, >>>> variantSecret: varSec, >>>> alias: userid >>>> } >>>> >>>> But nevertheless I can't register the device. I get this error: >>>> >>>> no valid aps-environment (the message is not in English, so I translate it freely:"It was not found a valid aps-environment for the app") >>>> >>>> What can be wrong? >>>> >>>> Thanks >>>> >>>> Miguel >>>> >>>> >>>> -- >>>> Sent from Gmail Mobile >>>> >>>> >>>> -- >>>> Sent from Gmail Mobile >>>> _______________________________________________ >>>> aerogear-dev mailing list >>>> aerogear-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

No Miguel, I didn't see your report where did you report it? On 18 Mar,2014, at 14:22 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > Hi Erik, > > Did you see my report? > Are you trying to fix the issue? > > Thanks > > M > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

I sent it yesterday in the afternoon :-( Basically the problem is caused by the fact that the Iphone version doesn't recognizes what's comming under the payload parameters (except the alert one) causing an error. Enviado do meu iPhone No dia 18/03/2014, às 13:25, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: > No Miguel, I didn’t see your report where did you report it? > >> On 18 Mar,2014, at 14:22 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> >> Hi Erik, >> >> Did you see my report? >> Are you trying to fix the issue? >> >> Thanks >> >> M >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Fine, Erik! Nice to know it's easy to fix. A small issue, that caused - almost - everything to fail... I'm glad I could help in the role of "bug buster" ;-) Miguel Enviado do meu iPhone

BTW Miguel I see that you are sending a lot of extras in the message, be careful that Apple doesn’t allow the message to become to big the max is 256 bytes. > On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: > > > PR submitted https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 > >> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> >> Fine, Erik! >> >> Nice to know it's easy to fix. >> >> A small issue, that caused - almost - everything to fail... >> >> I'm glad I could help in the role of "bug buster" ;-) >> >> Miguel >> >> Enviado do meu iPhone > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

> On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > Thanks Erik. I know that; the total payload never surpasses 256 byes and the av parameter (the notification itself) 107 characters. > > After the correction I just have the reinstall the plugin? That should be enough but it has sometime failed for me , in this case you will need to do a : cordova platform remove ios cordova platform add ios > > M > > Enviado do meu iPhone > > No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: > >> BTW Miguel I see that you are sending a lot of extras in the message, be careful that Apple doesn’t allow the message to become to big the max is 256 bytes. >> >>> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: >>> >>> >>> PR submitted https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >>> >>>> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>> >>>> Fine, Erik! >>>> >>>> Nice to know it's easy to fix. >>>> >>>> A small issue, that caused - almost - everything to fail... >>>> >>>> I'm glad I could help in the role of "bug buster" ;-) >>>> >>>> Miguel >>>> >>>> Enviado do meu iPhone >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Erik, I just uninstalled and installed again the Aerogear plugin, removed and installed again the Ios platform, I compiled the program, but the result didn't change: XCode debugger: *2014-03-18 21:24:11.983 SmartDrifter[3892:60b] Msg: {en:'598',cd:'',badge:'1',alert:'Teste',av:'Teste',ul:'',ln:'',at:'Aviso',cp:'',rd:'',lt:'',foreground:'1',} * cordova plugin add org.jboss.aerogear.cordova.push Maybe you didn't uploaded it yet? Thanks M On Tue, Mar 18, 2014 at 4:41 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > Yes. That "trick" has to be used sometimes. That's a very annoying > Cordova issue. Thanks. > > Enviado do meu iPhone > > No dia 18/03/2014, às 16:37, Sebastien Blanc <scm.blanc(a)gmail.com&gt; > escreveu: > > > > > On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > >> Thanks Erik. I know that; the total payload never surpasses 256 byes and >> the av parameter (the notification itself) 107 characters. >> >> After the correction I just have the reinstall the plugin? >> > That should be enough but it has sometime failed for me , in this case > you will need to do a : > > cordova platform remove ios > cordova platform add ios > > >> M >> >> Enviado do meu iPhone >> >> No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; >> escreveu: >> >> BTW Miguel I see that you are sending a lot of extras in the message, be >> careful that Apple doesn't allow the message to become to big the max is >> 256 bytes. >> >> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: >> >> >> PR submitted >> https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >> >> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> >> Fine, Erik! >> >> Nice to know it's easy to fix. >> >> A small issue, that caused - almost - everything to fail... >> >> I'm glad I could help in the role of "bug buster" ;-) >> >> Miguel >> >> Enviado do meu iPhone >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev > > _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Forget my previous post! Done ;-) I uploaded and installed directly the PushPugin.m to its location. I didn't pay attention to what you wrote... It's working OK now and there's no error. On Tue, Mar 18, 2014 at 9:30 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > Erik, > > I just uninstalled and installed again the Aerogear plugin, removed and > installed again the Ios platform, I compiled the program, but the result > didn't change: > > > XCode debugger: > > > > > *2014-03-18 21:24:11.983 SmartDrifter[3892:60b] Msg: > {en:'598',cd:'',badge:'1',alert:'Teste',av:'Teste',ul:'',ln:'',at:'Aviso',cp:'',rd:'',lt:'',foreground:'1',} > * > > cordova plugin add org.jboss.aerogear.cordova.push > > Maybe you didn't uploaded it yet? > > Thanks > > M > > > On Tue, Mar 18, 2014 at 4:41 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > >> Yes. That "trick" has to be used sometimes. That's a very annoying >> Cordova issue. Thanks. >> >> Enviado do meu iPhone >> >> No dia 18/03/2014, às 16:37, Sebastien Blanc <scm.blanc(a)gmail.com&gt; >> escreveu: >> >> >> >> >> On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >> >>> Thanks Erik. I know that; the total payload never surpasses 256 byes >>> and the av parameter (the notification itself) 107 characters. >>> >>> After the correction I just have the reinstall the plugin? >>> >> That should be enough but it has sometime failed for me , in this case >> you will need to do a : >> >> cordova platform remove ios >> cordova platform add ios >> >> >>> M >>> >>> Enviado do meu iPhone >>> >>> No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; >>> escreveu: >>> >>> BTW Miguel I see that you are sending a lot of extras in the message, >>> be careful that Apple doesn’t allow the message to become to big the max is >>> 256 bytes. >>> >>> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: >>> >>> >>> PR submitted >>> https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >>> >>> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>> >>> Fine, Erik! >>> >>> Nice to know it's easy to fix. >>> >>> A small issue, that caused - almost - everything to fail... >>> >>> I'm glad I could help in the role of "bug buster" ;-) >>> >>> Miguel >>> >>> Enviado do meu iPhone >>> >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> >

Cool ! Would be nice if you could add a comment here https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 like "+1 it's working" , assuming you have a github account. On Tue, Mar 18, 2014 at 10:46 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > Thanks Seb :-) > > I had already notice that and installed the new file "à la main". I't > working ! > > > On Tue, Mar 18, 2014 at 9:45 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > >> Forget my previous post! Done ;-) >> >> I uploaded and installed directly the PushPugin.m to its location. I >> didn't pay attention to what you wrote... >> It's working OK now and there's no error. >> >> >> >> >> On Tue, Mar 18, 2014 at 9:30 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >> >>> Erik, >>> >>> I just uninstalled and installed again the Aerogear plugin, removed and >>> installed again the Ios platform, I compiled the program, but the result >>> didn't change: >>> >>> >>> XCode debugger: >>> >>> >>> >>> >>> *2014-03-18 21:24:11.983 SmartDrifter[3892:60b] Msg: >>> {en:'598',cd:'',badge:'1',alert:'Teste',av:'Teste',ul:'',ln:'',at:'Aviso',cp:'',rd:'',lt:'',foreground:'1',} >>> * >>> >>> cordova plugin add org.jboss.aerogear.cordova.push >>> >>> Maybe you didn't uploaded it yet? >>> >>> Thanks >>> >>> M >>> >>> >>> On Tue, Mar 18, 2014 at 4:41 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>> >>>> Yes. That "trick" has to be used sometimes. That's a very annoying >>>> Cordova issue. Thanks. >>>> >>>> Enviado do meu iPhone >>>> >>>> No dia 18/03/2014, às 16:37, Sebastien Blanc <scm.blanc(a)gmail.com&gt; >>>> escreveu: >>>> >>>> >>>> >>>> >>>> On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>>> >>>>> Thanks Erik. I know that; the total payload never surpasses 256 byes >>>>> and the av parameter (the notification itself) 107 characters. >>>>> >>>>> After the correction I just have the reinstall the plugin? >>>>> >>>> That should be enough but it has sometime failed for me , in this case >>>> you will need to do a : >>>> >>>> cordova platform remove ios >>>> cordova platform add ios >>>> >>>> >>>>> M >>>>> >>>>> Enviado do meu iPhone >>>>> >>>>> No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; >>>>> escreveu: >>>>> >>>>> BTW Miguel I see that you are sending a lot of extras in the message, >>>>> be careful that Apple doesn’t allow the message to become to big the max is >>>>> 256 bytes. >>>>> >>>>> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: >>>>> >>>>> >>>>> PR submitted >>>>> https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >>>>> >>>>> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>> >>>>> Fine, Erik! >>>>> >>>>> Nice to know it's easy to fix. >>>>> >>>>> A small issue, that caused - almost - everything to fail... >>>>> >>>>> I'm glad I could help in the role of "bug buster" ;-) >>>>> >>>>> Miguel >>>>> >>>>> Enviado do meu iPhone >>>>> >>>>> >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>> >>>>> >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>> >>>>> >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>> >>>> >>>> _______________________________________________ >>>> aerogear-dev mailing list >>>> aerogear-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>> >>>> >>> >> > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev > _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Not 100% yet. If the app is running in the foreground, now the Json array is formed in a different way, and the alert window shows correctly and loads all the paramaters: *2014-03-18 22:00:12.980 SmartDrifter[4011:60b] Msg: {"alert":"Olá! Benvindo aos Armazéns do Chiado","badge":"1","payload": {"lt":"0.00000000000","cd":"","av":"Olá! Benvindo aos Armazéns do Chiado","ul":"http://metal-pr.net/c/?79 <http://metal-pr.net/c/?79>","ln":"0.00000000000&qu... *But if the message arrives first to the status bar (meaning: the app is not available), then nothing happens when I press the notification: the app opens indeed, but no alert window shows. Unfortunately I could not trace any errors, neither through the Safari debugger (the problem happens too soon, maybe before the index.html is fully available), nor through Xcode. But the problem has nothing to do with the previously faulty parameters because an alert(e.alert) doesn't trigger nothing either... On Tue, Mar 18, 2014 at 9:56 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > Too soon, unfortunately ! > > Isn't yet 100% perfect. There's still a problem if the app is running in > the background. I must dig further to understand why it happens :-( > > > On Tue, Mar 18, 2014 at 9:50 PM, Sebastien Blanc <scm.blanc(a)gmail.com&gt;wrote: > >> Cool ! >> Would be nice if you could add a comment here >> https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 like >> "+1 it's working" , assuming you have a github account. >> >> >> >> On Tue, Mar 18, 2014 at 10:46 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >> >>> Thanks Seb :-) >>> >>> I had already notice that and installed the new file "à la main". I't >>> working ! >>> >>> >>> On Tue, Mar 18, 2014 at 9:45 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>> >>>> Forget my previous post! Done ;-) >>>> >>>> I uploaded and installed directly the PushPugin.m to its location. I >>>> didn't pay attention to what you wrote... >>>> It's working OK now and there's no error. >>>> >>>> >>>> >>>> >>>> On Tue, Mar 18, 2014 at 9:30 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>>> >>>>> Erik, >>>>> >>>>> I just uninstalled and installed again the Aerogear plugin, removed >>>>> and installed again the Ios platform, I compiled the program, but the >>>>> result didn't change: >>>>> >>>>> >>>>> XCode debugger: >>>>> >>>>> >>>>> >>>>> >>>>> *2014-03-18 21:24:11.983 SmartDrifter[3892:60b] Msg: >>>>> {en:'598',cd:'',badge:'1',alert:'Teste',av:'Teste',ul:'',ln:'',at:'Aviso',cp:'',rd:'',lt:'',foreground:'1',} >>>>> * >>>>> >>>>> cordova plugin add org.jboss.aerogear.cordova.push >>>>> >>>>> Maybe you didn't uploaded it yet? >>>>> >>>>> Thanks >>>>> >>>>> M >>>>> >>>>> >>>>> On Tue, Mar 18, 2014 at 4:41 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>>>> >>>>>> Yes. That "trick" has to be used sometimes. That's a very annoying >>>>>> Cordova issue. Thanks. >>>>>> >>>>>> Enviado do meu iPhone >>>>>> >>>>>> No dia 18/03/2014, às 16:37, Sebastien Blanc <scm.blanc(a)gmail.com&gt; >>>>>> escreveu: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>>>>> >>>>>>> Thanks Erik. I know that; the total payload never surpasses 256 >>>>>>> byes and the av parameter (the notification itself) 107 characters. >>>>>>> >>>>>>> After the correction I just have the reinstall the plugin? >>>>>>> >>>>>> That should be enough but it has sometime failed for me , in this >>>>>> case you will need to do a : >>>>>> >>>>>> cordova platform remove ios >>>>>> cordova platform add ios >>>>>> >>>>>> >>>>>>> M >>>>>>> >>>>>>> Enviado do meu iPhone >>>>>>> >>>>>>> No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; >>>>>>> escreveu: >>>>>>> >>>>>>> BTW Miguel I see that you are sending a lot of extras in the >>>>>>> message, be careful that Apple doesn’t allow the message to become to big >>>>>>> the max is 256 bytes. >>>>>>> >>>>>>> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>> >>>>>>> PR submitted >>>>>>> https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >>>>>>> >>>>>>> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>> Fine, Erik! >>>>>>> >>>>>>> Nice to know it's easy to fix. >>>>>>> >>>>>>> A small issue, that caused - almost - everything to fail... >>>>>>> >>>>>>> I'm glad I could help in the role of "bug buster" ;-) >>>>>>> >>>>>>> Miguel >>>>>>> >>>>>>> Enviado do meu iPhone >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> aerogear-dev mailing list >>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> aerogear-dev mailing list >>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> aerogear-dev mailing list >>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> aerogear-dev mailing list >>>>>> aerogear-dev(a)lists.jboss.org >>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>> >>>>>> >>>>> >>>> >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> > >

Yeah didn’t test all possibilities apparently, there is a “ missing on the foreground property. Fixed now. > On 19 Mar,2014, at 0:08 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > > Now: if the app is not in the foreground, but it was not removed (still running), when a notification is sent and I press the status bar, the Safari debugger throws this error: SyntaxError: Unexpected number '0' > and no window is opened. > > All I have in my code is: > > alert(e.alert); > > The string that arrives to the device is like this: > > Msg: {"badge":"1","alert":"hlhlkhkl","payload": {"cp":"","cd":"","av":"hlhlkhkl","ul":"","ln":"","en":"598","at":"Aviso","rd":"","lt":"",},"foreground:"0"} > > > > Hope it helps. > > > >> On Tue, Mar 18, 2014 at 10:23 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Not 100% yet. >> >> If the app is running in the foreground, now the Json array is formed in a different way, and the alert window shows correctly and loads all the paramaters: >> >> 2014-03-18 22:00:12.980 SmartDrifter[4011:60b] Msg: {"alert":"Olá! Benvindo aos Armazéns do Chiado","badge":"1","payload": {"lt":"0.00000000000","cd":"","av":"Olá! Benvindo aos Armazéns do Chiado","ul":"http://metal-pr.net/c/?79","l... >> >> But if the message arrives first to the status bar (meaning: the app is not available), then nothing happens when I press the notification: the app opens indeed, but no alert window shows. Unfortunately I could not trace any errors, neither through the Safari debugger (the problem happens too soon, maybe before the index.html is fully available), nor through Xcode. But the problem has nothing to do with the previously faulty parameters because an alert(e.alert) doesn't trigger nothing either... >> >> >> >>> On Tue, Mar 18, 2014 at 9:56 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>> Too soon, unfortunately ! >>> >>> Isn't yet 100% perfect. There's still a problem if the app is running in the background. I must dig further to understand why it happens :-( >>> >>> >>>> On Tue, Mar 18, 2014 at 9:50 PM, Sebastien Blanc <scm.blanc(a)gmail.com&gt; wrote: >>>> Cool ! >>>> Would be nice if you could add a comment here https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 like "+1 it's working" , assuming you have a github account. >>>> >>>> >>>> >>>>> On Tue, Mar 18, 2014 at 10:46 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>> Thanks Seb :-) >>>>> >>>>> I had already notice that and installed the new file "à la main". I't working ! >>>>> >>>>> >>>>>> On Tue, Mar 18, 2014 at 9:45 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>>> Forget my previous post! Done ;-) >>>>>> >>>>>> I uploaded and installed directly the PushPugin.m to its location. I didn't pay attention to what you wrote... >>>>>> It's working OK now and there's no error. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> On Tue, Mar 18, 2014 at 9:30 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>>>> Erik, >>>>>>> >>>>>>> I just uninstalled and installed again the Aerogear plugin, removed and installed again the Ios platform, I compiled the program, but the result didn't change: >>>>>>> >>>>>>> >>>>>>> XCode debugger: >>>>>>> >>>>>>> >>>>>>> 2014-03-18 21:24:11.983 SmartDrifter[3892:60b] Msg: {en:'598',cd:'',badge:'1',alert:'Teste',av:'Teste',ul:'',ln:'',at:'Aviso',cp:'',rd:'',lt:'',foreground:'1',} >>>>>>> >>>>>>> >>>>>>> cordova plugin add org.jboss.aerogear.cordova.push >>>>>>> >>>>>>> Maybe you didn't uploaded it yet? >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> M >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On Tue, Mar 18, 2014 at 4:41 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>>>>> Yes. That "trick" has to be used sometimes. That's a very annoying Cordova issue. Thanks. >>>>>>>> >>>>>>>> Enviado do meu iPhone >>>>>>>> >>>>>>>> No dia 18/03/2014, às 16:37, Sebastien Blanc <scm.blanc(a)gmail.com&gt; escreveu: >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>>>>>>> Thanks Erik. I know that; the total payload never surpasses 256 byes and the av parameter (the notification itself) 107 characters. >>>>>>>>>> >>>>>>>>>> After the correction I just have the reinstall the plugin? >>>>>>>>> That should be enough but it has sometime failed for me , in this case you will need to do a : >>>>>>>>> >>>>>>>>> cordova platform remove ios >>>>>>>>> cordova platform add ios >>>>>>>>> >>>>>>>>>> >>>>>>>>>> M >>>>>>>>>> >>>>>>>>>> Enviado do meu iPhone >>>>>>>>>> >>>>>>>>>> No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: >>>>>>>>>> >>>>>>>>>>> BTW Miguel I see that you are sending a lot of extras in the message, be careful that Apple doesn’t allow the message to become to big the max is 256 bytes. >>>>>>>>>>> >>>>>>>>>>>> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> PR submitted https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >>>>>>>>>>>> >>>>>>>>>>>>> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Fine, Erik! >>>>>>>>>>>>> >>>>>>>>>>>>> Nice to know it's easy to fix. >>>>>>>>>>>>> >>>>>>>>>>>>> A small issue, that caused - almost - everything to fail... >>>>>>>>>>>>> >>>>>>>>>>>>> I'm glad I could help in the role of "bug buster" ;-) >>>>>>>>>>>>> >>>>>>>>>>>>> Miguel >>>>>>>>>>>>> >>>>>>>>>>>>> Enviado do meu iPhone >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> aerogear-dev mailing list >>>>>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> aerogear-dev mailing list >>>>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> aerogear-dev mailing list >>>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> aerogear-dev mailing list >>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>> >>>>> >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>> >>>> >>>> _______________________________________________ >>>> aerogear-dev mailing list >>>> aerogear-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

Erik, I think you didn't update the code... On Wed, Mar 19, 2014 at 9:28 AM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: Yes, I see it now. I'll test it as soon as I can again. M Enviado do meu iPhone No dia 19/03/2014, às 07:47, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: > Yeah didn’t test all possibilities apparently, there is a “ missing on the foreground property. Fixed now. > > On 19 Mar,2014, at 0:08 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > >> Now: if the app is not in the foreground, but it was not removed (still running), when a notification is sent and I press the status bar, the Safari debugger throws this error: SyntaxError: Unexpected number '0' >> and no window is opened. >> >> All I have in my code is: >> >> alert(e.alert); >> >> The string that arrives to the device is like this: >> >> Msg: {"badge":"1","alert":"hlhlkhkl","payload": {"cp":"","cd":"","av":"hlhlkhkl","ul":"","ln":"","en":"598","at":"Aviso","rd":"","lt":"",},"foreground:"0"} >> >> >> >> Hope it helps. >> >> >> >> On Tue, Mar 18, 2014 at 10:23 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Not 100% yet. >> >> If the app is running in the foreground, now the Json array is formed in a different way, and the alert window shows correctly and loads all the paramaters: >> >> 2014-03-18 22:00:12.980 SmartDrifter[4011:60b] Msg: {"alert":"Olá! Benvindo aos Armazéns do Chiado","badge":"1","payload": {"lt":"0.00000000000","cd":"","av":"Olá! Benvindo aos Armazéns do Chiado","ul":"http://metal-pr.net/c/?79","l... >> >> But if the message arrives first to the status bar (meaning: the app is not available), then nothing happens when I press the notification: the app opens indeed, but no alert window shows. Unfortunately I could not trace any errors, neither through the Safari debugger (the problem happens too soon, maybe before the index.html is fully available), nor through Xcode. But the problem has nothing to do with the previously faulty parameters because an alert(e.alert) doesn't trigger nothing either... >> >> >> >> On Tue, Mar 18, 2014 at 9:56 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Too soon, unfortunately ! >> >> Isn't yet 100% perfect. There's still a problem if the app is running in the background. I must dig further to understand why it happens :-( >> >> >> On Tue, Mar 18, 2014 at 9:50 PM, Sebastien Blanc <scm.blanc(a)gmail.com&gt; wrote: >> Cool ! >> Would be nice if you could add a comment here https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 like "+1 it's working" , assuming you have a github account. >> >> >> >> On Tue, Mar 18, 2014 at 10:46 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Thanks Seb :-) >> >> I had already notice that and installed the new file "à la main". I't working ! >> >> >> On Tue, Mar 18, 2014 at 9:45 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Forget my previous post! Done ;-) >> >> I uploaded and installed directly the PushPugin.m to its location. I didn't pay attention to what you wrote... >> It's working OK now and there's no error. >> >> >> >> >> On Tue, Mar 18, 2014 at 9:30 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Erik, >> >> I just uninstalled and installed again the Aerogear plugin, removed and installed again the Ios platform, I compiled the program, but the result didn't change: >> >> >> XCode debugger: >> >> >> 2014-03-18 21:24:11.983 SmartDrifter[3892:60b] Msg: {en:'598',cd:'',badge:'1',alert:'Teste',av:'Teste',ul:'',ln:'',at:'Aviso',cp:'',rd:'',lt:'',foreground:'1',} >> >> >> cordova plugin add org.jboss.aerogear.cordova.push >> >> Maybe you didn't uploaded it yet? >> >> Thanks >> >> M >> >> >> >> On Tue, Mar 18, 2014 at 4:41 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> Yes. That "trick" has to be used sometimes. That's a very annoying Cordova issue. Thanks. >> >> Enviado do meu iPhone >> >> No dia 18/03/2014, às 16:37, Sebastien Blanc <scm.blanc(a)gmail.com&gt; escreveu: >> >>> >>> >>> >>> On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>> Thanks Erik. I know that; the total payload never surpasses 256 byes and the av parameter (the notification itself) 107 characters. >>> >>> After the correction I just have the reinstall the plugin? >>> That should be enough but it has sometime failed for me , in this case you will need to do a : >>> >>> cordova platform remove ios >>> cordova platform add ios >>> >>> >>> M >>> >>> Enviado do meu iPhone >>> >>> No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; escreveu: >>> >>>> BTW Miguel I see that you are sending a lot of extras in the message, be careful that Apple doesn’t allow the message to become to big the max is 256 bytes. >>>> >>>> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; wrote: >>>> >>>>> >>>>> PR submitted https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >>>>> >>>>> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >>>>> >>>>>> Fine, Erik! >>>>>> >>>>>> Nice to know it's easy to fix. >>>>>> >>>>>> A small issue, that caused - almost - everything to fail... >>>>>> >>>>>> I'm glad I could help in the role of "bug buster" ;-) >>>>>> >>>>>> Miguel >>>>>> >>>>>> Enviado do meu iPhone >>>>> >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>> >>>> _______________________________________________ >>>> aerogear-dev mailing list >>>> aerogear-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>> >>> _______________________________________________ >>> aerogear-dev mailing list >>> aerogear-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

OK. I just pasted the PushPlugin.m but I picked the yesterday's version. I already tested it and now it's working correctly, thanks. Thanks On Wed, Mar 19, 2014 at 1:47 PM, Erik Jan de Wit <edewit(a)redhat.com&gt;wrote: > I did > https://github.com/edewit/aerogear-pushplugin-cordova/commit/1df1adcaa76a... > > > checkout my branch: > > git checkout -b edewit-payload-missing master > git pull git@github.com:edewit/aerogear-pushplugin-cordova.git payload-missing > > > > On 19 Mar,2014, at 14:43 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > > Erik, > > I think you didn't update the code... > > > On Wed, Mar 19, 2014 at 9:28 AM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: > >> Yes, I see it now. I'll test it as soon as I can again. >> >> M >> >> Enviado do meu iPhone >> >> No dia 19/03/2014, às 07:47, Erik Jan de Wit <edewit(a)redhat.com&gt; >> escreveu: >> >> Yeah didn’t test all possibilities apparently, there is a “ missing on >> the foreground property. Fixed now. >> >> On 19 Mar,2014, at 0:08 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> >> Now: if the app is not in the foreground, but it was not removed (still >> running), when a notification is sent and I press the status bar, the >> Safari debugger throws this error: SyntaxError: Unexpected number '0' >> and no window is opened. >> >> All I have in my code is: >> >> alert(e.alert); >> >> The string that arrives to the device is like this: >> >> >> >> *Msg: {"badge":"1","alert":"hlhlkhkl","payload": >> {"cp":"","cd":"","av":"hlhlkhkl","ul":"","ln":"","en":"598","at":"Aviso","rd":"","lt":"",},"foreground:"0"} >> * >> >> Hope it helps. >> >> >> On Tue, Mar 18, 2014 at 10:23 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >> >>> Not 100% yet. >>> >>> If the app is running in the foreground, now the Json array is formed >>> in a different way, and the alert window shows correctly and loads all the >>> paramaters: >>> >>> >>> >>> *2014-03-18 22:00:12.980 SmartDrifter[4011:60b] Msg: {"alert":"Olá! >>> Benvindo aos Armazéns do Chiado","badge":"1","payload": >>> {"lt":"0.00000000000","cd":"","av":"Olá! Benvindo aos Armazéns do >>> Chiado","ul":"http://metal-pr.net/c/?79 >>> <http://metal-pr.net/c/?79>","ln":"0.00000000000&qu... >>> *But if the message arrives first to the status bar (meaning: the app >>> is not available), then nothing happens when I press the notification: the >>> app opens indeed, but no alert window shows. Unfortunately I could not >>> trace any errors, neither through the Safari debugger (the problem happens >>> too soon, maybe before the index.html is fully available), nor through >>> Xcode. But the problem has nothing to do with the previously faulty >>> parameters because an alert(e.alert) doesn't trigger nothing either... >>> >>> >>> On Tue, Mar 18, 2014 at 9:56 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>> >>>> Too soon, unfortunately ! >>>> >>>> Isn't yet 100% perfect. There's still a problem if the app is running >>>> in the background. I must dig further to understand why it happens :-( >>>> >>>> >>>> On Tue, Mar 18, 2014 at 9:50 PM, Sebastien Blanc <scm.blanc(a)gmail.com&gt;wrote: >>>> >>>>> Cool ! >>>>> Would be nice if you could add a comment here >>>>> https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 like >>>>> "+1 it's working" , assuming you have a github account. >>>>> >>>>> >>>>> >>>>> On Tue, Mar 18, 2014 at 10:46 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>>>> >>>>>> Thanks Seb :-) >>>>>> >>>>>> I had already notice that and installed the new file "à la main". >>>>>> I't working ! >>>>>> >>>>>> >>>>>> On Tue, Mar 18, 2014 at 9:45 PM, Miguel Lemos <miguel21op(a)gmail.com&gt;wrote: >>>>>> >>>>>>> Forget my previous post! Done ;-) >>>>>>> >>>>>>> I uploaded and installed directly the PushPugin.m to its location. >>>>>>> I didn't pay attention to what you wrote... >>>>>>> It's working OK now and there's no error. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Tue, Mar 18, 2014 at 9:30 PM, Miguel Lemos <miguel21op(a)gmail.com >>>>>>> > wrote: >>>>>>> >>>>>>>> Erik, >>>>>>>> >>>>>>>> I just uninstalled and installed again the Aerogear plugin, >>>>>>>> removed and installed again the Ios platform, I compiled the program, but >>>>>>>> the result didn't change: >>>>>>>> >>>>>>>> >>>>>>>> XCode debugger: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> *2014-03-18 21:24:11.983 SmartDrifter[3892:60b] Msg: >>>>>>>> {en:'598',cd:'',badge:'1',alert:'Teste',av:'Teste',ul:'',ln:'',at:'Aviso',cp:'',rd:'',lt:'',foreground:'1',} >>>>>>>> * >>>>>>>> >>>>>>>> cordova plugin add org.jboss.aerogear.cordova.push >>>>>>>> >>>>>>>> Maybe you didn't uploaded it yet? >>>>>>>> >>>>>>>> Thanks >>>>>>>> >>>>>>>> M >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Mar 18, 2014 at 4:41 PM, Miguel Lemos < >>>>>>>> miguel21op(a)gmail.com&gt; wrote: >>>>>>>> >>>>>>>>> Yes. That "trick" has to be used sometimes. That's a very >>>>>>>>> annoying Cordova issue. Thanks. >>>>>>>>> >>>>>>>>> Enviado do meu iPhone >>>>>>>>> >>>>>>>>> No dia 18/03/2014, às 16:37, Sebastien Blanc <scm.blanc(a)gmail.com&gt; >>>>>>>>> escreveu: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Tue, Mar 18, 2014 at 5:34 PM, Miguel Lemos < >>>>>>>>> miguel21op(a)gmail.com&gt; wrote: >>>>>>>>> >>>>>>>>>> Thanks Erik. I know that; the total payload never surpasses 256 >>>>>>>>>> byes and the av parameter (the notification itself) 107 characters. >>>>>>>>>> >>>>>>>>>> After the correction I just have the reinstall the plugin? >>>>>>>>>> >>>>>>>>> That should be enough but it has sometime failed for me , in this >>>>>>>>> case you will need to do a : >>>>>>>>> >>>>>>>>> cordova platform remove ios >>>>>>>>> cordova platform add ios >>>>>>>>> >>>>>>>>> >>>>>>>>>> M >>>>>>>>>> >>>>>>>>>> Enviado do meu iPhone >>>>>>>>>> >>>>>>>>>> No dia 18/03/2014, às 16:24, Erik Jan de Wit <edewit(a)redhat.com&gt; >>>>>>>>>> escreveu: >>>>>>>>>> >>>>>>>>>> BTW Miguel I see that you are sending a lot of extras in the >>>>>>>>>> message, be careful that Apple doesn’t allow the message to become to big >>>>>>>>>> the max is 256 bytes. >>>>>>>>>> >>>>>>>>>> On 18 Mar,2014, at 17:08 , Erik Jan de Wit <edewit(a)redhat.com&gt; >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> PR submitted >>>>>>>>>> https://github.com/aerogear/aerogear-pushplugin-cordova/pull/20 >>>>>>>>>> >>>>>>>>>> On 18 Mar,2014, at 15:49 , Miguel Lemos <miguel21op(a)gmail.com&gt; >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Fine, Erik! >>>>>>>>>> >>>>>>>>>> Nice to know it's easy to fix. >>>>>>>>>> >>>>>>>>>> A small issue, that caused - almost - everything to fail... >>>>>>>>>> >>>>>>>>>> I'm glad I could help in the role of "bug buster" ;-) >>>>>>>>>> >>>>>>>>>> Miguel >>>>>>>>>> >>>>>>>>>> Enviado do meu iPhone >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> aerogear-dev mailing list >>>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> aerogear-dev mailing list >>>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> aerogear-dev mailing list >>>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> aerogear-dev mailing list >>>>>>>>> aerogear-dev(a)lists.jboss.org >>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> aerogear-dev mailing list >>>>>> aerogear-dev(a)lists.jboss.org >>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> aerogear-dev mailing list >>>>> aerogear-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev >>>>> >>>> >>>> >>> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> >> > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev > > > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev >

Sorry Miguel, If you are talking about the missing payload I’ve fixed that on the master branch and on the new ‘simplification’ branch in this commit https://github.com/aerogear/aerogear-pushplugin-cordova/commit/1aa8683e64... The reason the PushPlugin looks different is that instead of using our own logic to convert it to json it now uses cordovas. If this is not what you are talking about could you clarify what you seem to be missing? Cheers, Erik Jan On 1 Apr,2014, at 14:17 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: Hi! I downloaded the Cordova plugin with the last "updates", but apparently the corrections you did previously aren't there yet. I had to download the revised PushPlugin.m "by hand". _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev

On Tue, Apr 1, 2014 at 3:20 PM, Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: > > But then this means that people shouldn't use anymore the "cordova plugin > add org.jboss.aerogear.cordova.push"? > Huh, that would be really nasty! > > > > On Tue, Apr 1, 2014 at 1:29 PM, Erik Jan de Wit <edewit(a)redhat.com&gt;wrote: > >> Sorry Miguel, >> >> If you are talking about the missing payload I’ve fixed that on the >> master branch and on the new ‘simplification’ branch in this commit >> https://github.com/aerogear/aerogear-pushplugin-cordova/commit/1aa8683e64... >> >> >> The reason the PushPlugin looks different is that instead of using our >> own logic to convert it to json it now uses cordovas. >> >> If this is not what you are talking about could you clarify what you >> seem to be missing? >> >> Cheers, >> Erik Jan >> >> On 1 Apr,2014, at 14:17 , Miguel Lemos <miguel21op(a)gmail.com&gt; wrote: >> >> Hi! >> >> I downloaded the Cordova plugin with the last "updates", but apparently >> the corrections you did previously aren't there yet. I had to download the >> revised PushPlugin.m "by hand". >> >> >> >> _______________________________________________ >> aerogear-dev mailing list >> aerogear-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/aerogear-dev >> > > > _______________________________________________ > aerogear-dev mailing list > aerogear-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/aerogear-dev > -- Matthias Wessendorf blog: http://matthiaswessendorf.wordpress.com/ sessions: http://www.slideshare.net/mwessendorf twitter: http://twitter.com/mwessendorf _______________________________________________ aerogear-dev mailing list aerogear-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/aerogear-dev