[JBoss JIRA] Created: (TEIID-803) The connector binding name assigned when created in the designer is not the name in the ConnectorBinding when using AdminAPI
5:38 p.m.
The connector binding name assigned when created in the designer is not the name in the
ConnectorBinding when using AdminAPI
----------------------------------------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/jira/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Steven Hawkins
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined. Open
the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:08 p.m.
New subject: [JBoss JIRA] Commented: (TEIID-803) The connector binding name assigned when created in the designer is not the name in the ConnectorBinding when using AdminAPI
[
https://jira.jboss.org/jira/browse/TEIID-803?page=com.atlassian.jira.plug...
]
Ramesh Reddy commented on TEIID-803:
------------------------------------
Only in the absence of the "DeployedName" property in the connector properties,
the name "full name" of the connector is used as the "DeployedName".
This provision is there so that Teiid can safely namespace the Connectors for given VDB.
If you used designer to assign, it will internally turn it into above format. Once
deployed they will only get accessed by the deployed name. If you want to use
"datasource1" as the name then you would manually delete the
"DeployedName" property.
The connector binding name assigned when created in the designer is
not the name in the ConnectorBinding when using AdminAPI
----------------------------------------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/jira/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Steven Hawkins
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined.
Open the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:10 a.m.
New subject: [JBoss JIRA] Commented: (TEIID-803) The connector binding name assigned when created in the designer is not the name in the ConnectorBinding when using AdminAPI
[
https://jira.jboss.org/jira/browse/TEIID-803?page=com.atlassian.jira.plug...
]
Van Halbert commented on TEIID-803:
-----------------------------------
There's several problems with this approach:
1. This is not a good usability option to take the entered name by the user and turn it
into something else. Will the user/developer/monitoring tool somehow, intuitively,
know that. Also, I think this is an unnecessary complexity to teach the user.
2. the DeployedName property isn't visible in the designer to change it or delete
it. So changing it will be problematic.
3. The generated name - Transaction_1.datasource1 is made up some combination of
variables. I see where Transaction and datasource come from, but it added
"_1". Which will make the usability an issue.
Common sense says the name I call the connector binding in the designer should be the name
I get when I call getName() on ConnectorBinding. Now if the internals of Teiid need
the deployedName or there's need to expose a name that a differentiator for other
reasons, then I sugguest adding another method, like getDeployedName().
The connector binding name assigned when created in the designer is
not the name in the ConnectorBinding when using AdminAPI
----------------------------------------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/jira/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Steven Hawkins
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined.
Open the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:24 a.m.
New subject: [JBoss JIRA] Commented: (TEIID-803) The connector binding name assigned when created in the designer is not the name in the ConnectorBinding when using AdminAPI
[
https://jira.jboss.org/jira/browse/TEIID-803?page=com.atlassian.jira.plug...
]
Ramesh Reddy commented on TEIID-803:
------------------------------------
These changes are made to provide "vdb" scoped connectors.
From the example "Transaction_1.datasource1"
Transaction = is the name of the VDB
1 = version of the VDB
datasource1 = name of the connector
This is done so that multiple VDBs in a single runtime can have similar named connectors
and do not have worry about conflicts. More over this does not need to be in the format
"vdb_version.connector name", this can be any name that the user wants in the
Teiid runtime just like the name, however for simplicity the Designer uses the VDB as the
prefix.
Adding the "getDeployedName" method to the ConnectorBinding admin object is good
idea, as with clustering feature we may need to further prefix these with process name to
identify correctly which connector instance we are dealing with.
The connector binding name assigned when created in the designer is
not the name in the ConnectorBinding when using AdminAPI
----------------------------------------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/jira/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Steven Hawkins
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined.
Open the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:58 a.m.
New subject: [JBoss JIRA] Updated: (TEIID-803) The AdminAPI connector binding name needs to be assigned the name assigned by the designer
[
https://jira.jboss.org/jira/browse/TEIID-803?page=com.atlassian.jira.plug...
]
Van Halbert updated TEIID-803:
------------------------------
Summary: The AdminAPI connector binding name needs to be assigned the name assigned by
the designer (was: The connector binding name assigned when created in the designer is
not the name in the ConnectorBinding when using AdminAPI)
When creating the adminobject Connectorbinding, the identifier will be assigned the
deployed name and the name will be that the name assigned in the Designer.
The AdminAPI connector binding name needs to be assigned the name
assigned by the designer
------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/jira/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Steven Hawkins
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined.
Open the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:13 p.m.
New subject: [JBoss JIRA] Updated: (TEIID-803) The AdminAPI connector binding name needs to be assigned the name assigned by the designer
[
https://jira.jboss.org/jira/browse/TEIID-803?page=com.atlassian.jira.plug...
]
Ramesh Reddy updated TEIID-803:
-------------------------------
Fix Version/s: 6.3.0
Assignee: Ramesh Reddy (was: Steven Hawkins)
The AdminAPI connector binding name needs to be assigned the name
assigned by the designer
------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/jira/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Ramesh Reddy
Fix For: 6.3.0
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined.
Open the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:39 a.m.
New subject: [JBoss JIRA] Resolved: (TEIID-803) The AdminAPI connector binding name needs to be assigned the name assigned by the designer
[
https://jira.jboss.org/jira/browse/TEIID-803?page=com.atlassian.jira.plug...
]
Ramesh Reddy resolved TEIID-803.
--------------------------------
Resolution: Out of Date
This is no longer applies with the JCA container version. The user defines the
"source-name" for the connector. The getName() call would be always return the
"source-name. The deployed/mapped name is the "jndi-name".
The AdminAPI connector binding name needs to be assigned the name
assigned by the designer
------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/jira/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Ramesh Reddy
Fix For: 7.0
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined.
Open the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3 p.m.
New subject: [JBoss JIRA] Closed: (TEIID-803) The AdminAPI connector binding name needs to be assigned the name assigned by the designer
[
https://jira.jboss.org/browse/TEIID-803?page=com.atlassian.jira.plugin.sy...
]
Steve Hawkins closed TEIID-803.
-------------------------------
The AdminAPI connector binding name needs to be assigned the name
assigned by the designer
------------------------------------------------------------------------------------------
Key: TEIID-803
URL: https://jira.jboss.org/browse/TEIID-803
Project: Teiid
Issue Type: Bug
Components: AdminApi, Tools
Affects Versions: 6.2.0
Reporter: Van Halbert
Assignee: Ramesh Reddy
Fix For: 7.0
The name I assigned to the connectorbinding in the designer was "datasource1".
I looked at the advanced properties and there is no other name property defined.
Open the vdb file and view the Configuration.def file and it has the following:
<Connector Name="datasource1" ComponentType="Loopback
Connector" routingUUID="mmuuid:66dfa66b-4572-46ba-a477-8b6fe3895072">
<Properties>
<Property
Name="DeployedName">Transaction_1.datasource1</Property>
</Properties>
</Connector>
When using the adminapi and calleding getName() on ConnectorBinding, the name returned is
"Transaction_1.datasource1". The name that the user assignes to the binding
should match the getName().
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5306
days inactive
5599
days old
7 comments
3 participants
participants (3)
-
Ramesh Reddy (JIRA) -
Steve Hawkins (JIRA)
-
Van Halbert (JIRA)