July 2010 - jboss-user - Jboss List Archives

[jBPM] - Rejection from task to previous tasks

by Jim Imbrogno

Jim Imbrogno [http://community.jboss.org/people/jimbrogno] created the discussion "Rejection from task to previous tasks" To view the discussion, visit: http://community.jboss.org/message/553132#553132 -------------------------------------------------------------- Hello, We are trying to implement an ordering system where there a series of tasks. There is a need for us to be able to allow the current task owner to reject the order to state of any of the previously executed tasks. Is there a way to do this in JBPM without having to create transitions for each permutation and combination? Thanks in advance. Jim. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553132#553132] Start a new discussion in jBPM at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

Re: [jboss-user] [jBPM] - How to start/spawn 'n' subprocesses for 'n' users using JBPM-4.3.

by Felix Jose

Felix Jose [http://community.jboss.org/people/FelixKJose] replied to the discussion "How to start/spawn 'n' subprocesses for 'n' users using JBPM-4.3." To view the discussion, visit: http://community.jboss.org/message/553128#553128 -------------------------------------------------------------- Hi Al Nadein, Thank you very much. I was waiting for a reply for 2 days. At last I got a reply. Thank you. And I have gone through the link you mentioned in the reply. In that you have mentioned a few workarounds and I would like to know which workaround you have used. With the workaround is there any impacts in the other functionalities? Please let me know the exact workaround you used. And as the reply of your discusion Huesheng mentioned a patch and whether it is part of 4.3 or do you tested the same and used. If yes please provide that and if not please send me your patch for removing the unique constraint for ID_ in the JBPM4_EXECUTION table. I have included HuieSheng's Reply below: http://community.jboss.org/servlet/JiveServlet/showImage/4338/HuieSheng%2... http://community.jboss.org/servlet/JiveServlet/downloadImage/4338/450-72/... Please send me the exact workaround you have used. And one more doubt do you have an idea why the unique constraint is there for ID_ in the JBPM4_EXECUTION table. If we remove that, will it cause any unwanted outcomes in other functionalities? Once again thanks alot for your reply and help. With Regards, Felix K Jose -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553128#553128] Start a new discussion in jBPM at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

Re: [jboss-user] [JBoss Messaging] - JBOSS Messaging Issue

by Muthukumaran Manickavasagam

Muthukumaran Manickavasagam [http://community.jboss.org/people/mmuthu] replied to the discussion "JBOSS Messaging Issue" To view the discussion, visit: http://community.jboss.org/message/553120#553120 -------------------------------------------------------------- I tried running JBOSS Messaging examples. It did not help much. So later on i started everything from the scratch and reaized that i need "messaging" folder even in the place where i'm running client application in JBOSS. When i have messaging folder, during sartup i can see the connection factories are created and i believe this resolves my problem. Now my messaging client able to send messages to server. Is this dependency is right? Do we have any other better way of doing it? I really don't like to have the "messaging" folder in my client application which requires to have "ServerPeer" and some form of JMSUser, Persistency services, etc. I do not want all of them in my client application. Any suggestion to do achieve this ? -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553120#553120] Start a new discussion in JBoss Messaging at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

Re: [jboss-user] [jBPM] - How to start/spawn 'n' subprocesses for 'n' users using JBPM-4.3.

by Al Nadein

Al Nadein [http://community.jboss.org/people/matrixpooh] replied to the discussion "How to start/spawn 'n' subprocesses for 'n' users using JBPM-4.3." To view the discussion, visit: http://community.jboss.org/message/553119#553119 -------------------------------------------------------------- Hi Felix, You might've run into the same issue I had described in https://community.jboss.org/message/544938#544938 https://community.jboss.org/message/544938#544938 A simple work-around for your issue is to drop a unique constrain on ID_ field in jbpm4_execution In my case, I ended up patching pvm's ExecutionImpl.java -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553119#553119] Start a new discussion in jBPM at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

[Beginner's Corner] - Upgrading JBoss 4.0 to 5.1 - application won't connect

by Lance Goforth

Lance Goforth [http://community.jboss.org/people/lancetx] created the discussion "Upgrading JBoss 4.0 to 5.1 - application won't connect" To view the discussion, visit: http://community.jboss.org/message/553101#553101 -------------------------------------------------------------- I have been trying to install a JBoss 5.1 instance and get my application to work under it. The application has been running for several years under 4.0.5 and is a strict EJB2 application with a standalone java app front end connecting with JNDI. I had hoped to try migrating to EJB3 a bit at a time, there is no time for a full conversion project, and I need the old application to run as is until I can move parts over. I got the server jar to deploy fine under 5.1 and haven't seen any errors except for: Deployment "vfsfile:/C:/Java/jboss-5.1.0.GA/server/default/deploy/properties-service.xml" is in error due to the following reason(s): java.lang.NoSuchMethodError: org.jboss.system.server.ServerConfigLocator.locate()Lorg/jboss/system/server/ServerConfig; Which some of the discussions I've found here seem to indicate isn't a real problem. It isn't one of my xml files, but one that came with the install. But when I run the application pointing to the new 5.1 server, it doesn't connect. I don't see any errors, any messages, just an eventual timeout. I was wondering if the JNDI providers have to change or if there is something I'm missing. Not even sure where to go next. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553101#553101] Start a new discussion in Beginner's Corner at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

Re: [jboss-user] [JBoss Messaging] - equivalent of Websphere's Asynchronous remote queues

by Dean Hiller

Dean Hiller [http://community.jboss.org/people/deanhiller2001] replied to the discussion "equivalent of Websphere's Asynchronous remote queues" To view the discussion, visit: http://community.jboss.org/message/553088#553088 -------------------------------------------------------------- I thought about bridges but we have 4 clusters(3 sending and 1 receiving)....8 servers total so we would need to setup a bridge for each one....instead we just wrote our own client side persistence which is a bit annoying. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553088#553088] Start a new discussion in JBoss Messaging at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

[JCA Development] - jboss-ra version

by Stefano Maestri

Stefano Maestri [http://community.jboss.org/people/maeste] created the discussion "jboss-ra version" To view the discussion, visit: http://community.jboss.org/message/553074#553074 -------------------------------------------------------------- Hi guys, during parsing I need to know which version of jboss-ra.xsd is in use. In connector-*.xsd the root tag have an attribute version. Our jboss-ra files haven't it. We have 2 opportunity: * Add the version attribute to the root tag * change target namespace in xsd using something like http://www.jboss.org/schema/ra/1.0 http://www.jboss.org/schema/ra/1.0 and http://www.jboss.org/schema/ra/2.0 http://www.jboss.org/schema/ra/2.0 Your thoughts? For the moment I have choosed the second approach just because it is giving me the opportunity to play with namespace in StAX, but it is very easy to change. bye S. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553074#553074] Start a new discussion in JCA Development at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

Re: [jboss-user] [JBoss Tools] - [hibernate-tools] Display indices

by darren hartford

darren hartford [http://community.jboss.org/people/dhartford] replied to the discussion "[hibernate-tools] Display indices" To view the discussion, visit: http://community.jboss.org/message/553064#553064 -------------------------------------------------------------- If you already have the Hibernate Configuration view open to see all the Class objects available, and the HQL editor open (the HQL/JPA-QL query you want to optimize), and have the Dynamic SQL Preview view open to see the actual query, I was kind of hoping to just add to the Hibernate Configuration view (that you may already have open) that index information in its Database tree node. Just seems like keep adding in more views/swapping to more tools (such as a DTP view), when there is an opportunity for improvement. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553064#553064] Start a new discussion in JBoss Tools at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

Re: [jboss-user] [JBoss Messaging] - equivalent of Websphere's Asynchronous remote queues

by Noel O'Connor

Noel O'Connor [http://community.jboss.org/people/noelo] replied to the discussion "equivalent of Websphere's Asynchronous remote queues" To view the discussion, visit: http://community.jboss.org/message/553053#553053 -------------------------------------------------------------- I'm not sure how exactly to do this in JBM, perhaps using JMS bridging. As a possible alternative take a look at core bridges in HornetQ. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553053#553053] Start a new discussion in JBoss Messaging at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

Re: [jboss-user] [JBoss Tools] - [hibernate-tools] Display indices

by Max Andersen

Max Andersen [http://community.jboss.org/people/max.andersen%40jboss.com] replied to the discussion "[hibernate-tools] Display indices" To view the discussion, visit: http://community.jboss.org/message/553046#553046 -------------------------------------------------------------- For that you should look into DTP which is a much more complete Database browser. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/553046#553046] Start a new discussion in JBoss Tools at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

14 years, 2 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user July 2010