1:36 p.m.
Hi,
These are my configurations,
MySQL - my.ini
| # MySQL Server Instance Configuration File
| # ----------------------------------------------------------------------
| # Generated by the MySQL Server Instance Configuration Wizard
| #
| #
| # Installation Instructions
| # ----------------------------------------------------------------------
| #
| # On Linux you can copy this file to /etc/my.cnf to set global options,
| # mysql-data-dir/my.cnf to set server-specific options
| # (@localstatedir@ for this installation) or to
| # ~/.my.cnf to set user-specific options.
| #
| # On Windows you should keep this file in the installation directory
| # of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
| # make sure the server reads the config file use the startup option
| # "--defaults-file".
| #
| # To run run the server from the command line, execute this in a
| # command line shell, e.g.
| # mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
| #
| # To install the server as a Windows service manually, execute this in a
| # command line shell, e.g.
| # mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server
X.Y\my.ini"
| #
| # And then execute this in a command line shell to start the server, e.g.
| # net start MySQLXY
| #
| #
| # Guildlines for editing this file
| # ----------------------------------------------------------------------
| #
| # In this file, you can use all long options that the program supports.
| # If you want to know the options a program supports, start the program
| # with the "--help" option.
| #
| # More detailed information about the individual options can also be
| # found in the manual.
| #
| #
| # CLIENT SECTION
| # ----------------------------------------------------------------------
| #
| # The following options will be read by MySQL client applications.
| # Note that only client applications shipped by MySQL are guaranteed
| # to read this section. If you want your own MySQL client program to
| # honor these values, you need to specify it as an option during the
| # MySQL client library initialization.
| #
| [client]
|
| port=3306
|
| [mysql]
|
| default-character-set=latin1
|
|
| # SERVER SECTION
| # ----------------------------------------------------------------------
| #
| # The following options will be read by the MySQL Server. Make sure that
| # you have installed the server correctly (see above) so it reads this
| # file.
| #
| [mysqld]
|
| # The TCP/IP Port the MySQL Server will listen on
| port=3306
|
| skip-networking
| enable-named-pipe
| socket=mysql.sock
|
|
| #Path to installation directory. All paths are usually resolved relative to this.
| basedir="C:/Archivos de programa/MySQL/MySQL Server 5.0/"
|
| #Path to the database root
| datadir="C:/Archivos de programa/MySQL/MySQL Server 5.0/Data/"
|
| # The default character set that will be used when a new schema or table is
| # created and no character set is defined
| default-character-set=latin1
|
| # The default storage engine that will be used when create new tables when
| default-storage-engine=INNODB
|
| # Set the SQL mode to strict
| sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
|
| # The maximum amount of concurrent sessions the MySQL server will
| # allow. One of these connections will be reserved for a user with
| # SUPER privileges to allow the administrator to login even if the
| # connection limit has been reached.
| max_connections=100
|
| # Query cache is used to cache SELECT results and later return them
| # without actual executing the same query once again. Having the query
| # cache enabled may result in significant speed improvements, if your
| # have a lot of identical queries and rarely changing tables. See the
| # "Qcache_lowmem_prunes" status variable to check if the current value
| # is high enough for your load.
| # Note: In case your tables change very often or if your queries are
| # textually different every time, the query cache may result in a
| # slowdown instead of a performance improvement.
| query_cache_size=0
|
| # The number of open tables for all threads. Increasing this value
| # increases the number of file descriptors that mysqld requires.
| # Therefore you have to make sure to set the amount of open files
| # allowed to at least 4096 in the variable "open-files-limit" in
| # section [mysqld_safe]
| table_cache=256
|
| # Maximum size for internal (in-memory) temporary tables. If a table
| # grows larger than this value, it is automatically converted to disk
| # based table This limitation is for a single table. There can be many
| # of them.
| tmp_table_size=17M
|
|
| # How many threads we should keep in a cache for reuse. When a client
| # disconnects, the client's threads are put in the cache if there aren't
| # more than thread_cache_size threads from before. This greatly reduces
| # the amount of thread creations needed if you have a lot of new
| # connections. (Normally this doesn't give a notable performance
| # improvement if you have a good thread implementation.)
| thread_cache_size=8
|
| #*** MyISAM Specific options
|
| # The maximum size of the temporary file MySQL is allowed to use while
| # recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
| # If the file-size would be bigger than this, the index will be created
| # through the key cache (which is slower).
| myisam_max_sort_file_size=100G
|
| # If the temporary file used for fast index creation would be bigger
| # than using the key cache by the amount specified here, then prefer the
| # key cache method. This is mainly used to force long character keys in
| # large tables to use the slower key cache method to create the index.
| myisam_max_extra_sort_file_size=100G
|
| # If the temporary file used for fast index creation would be bigger
| # than using the key cache by the amount specified here, then prefer the
| # key cache method. This is mainly used to force long character keys in
| # large tables to use the slower key cache method to create the index.
| myisam_sort_buffer_size=34M
|
| # Size of the Key Buffer, used to cache index blocks for MyISAM tables.
| # Do not set it larger than 30% of your available memory, as some memory
| # is also required by the OS to cache rows. Even if you're not using
| # MyISAM tables, you should still set it to 8-64M as it will also be
| # used for internal temporary disk tables.
| key_buffer_size=25M
|
| # Size of the buffer used for doing full table scans of MyISAM tables.
| # Allocated per thread, if a full scan is needed.
| read_buffer_size=64K
| read_rnd_buffer_size=256K
|
| # This buffer is allocated when MySQL needs to rebuild the index in
| # REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
| # into an empty table. It is allocated per thread so be careful with
| # large settings.
| sort_buffer_size=256K
|
|
| #*** INNODB Specific options ***
|
|
| # Use this option if you have a MySQL server with InnoDB support enabled
| # but you do not plan to use it. This will save memory and disk space
| # and speed up some things.
| #skip-innodb
|
| # Additional memory pool that is used by InnoDB to store metadata
| # information. If InnoDB requires more memory for this purpose it will
| # start to allocate it from the OS. As this is fast enough on most
| # recent operating systems, you normally do not need to change this
| # value. SHOW INNODB STATUS will display the current amount used.
| innodb_additional_mem_pool_size=2M
|
| # If set to 1, InnoDB will flush (fsync) the transaction logs to the
| # disk at each commit, which offers full ACID behavior. If you are
| # willing to compromise this safety, and you are running small
| # transactions, you may set this to 0 or 2 to reduce disk I/O to the
| # logs. Value 0 means that the log is only written to the log file and
| # the log file flushed to disk approximately once per second. Value 2
| # means the log is written to the log file at each commit, but the log
| # file is only flushed to disk approximately once per second.
| innodb_flush_log_at_trx_commit=1
|
| # The size of the buffer InnoDB uses for buffering log data. As soon as
| # it is full, InnoDB will have to flush it to disk. As it is flushed
| # once per second anyway, it does not make sense to have it very large
| # (even with long transactions).
| innodb_log_buffer_size=1M
|
| # InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
| # row data. The bigger you set this the less disk I/O is needed to
| # access data in tables. On a dedicated database server you may set this
| # parameter up to 80% of the machine physical memory size. Do not set it
| # too large, though, because competition of the physical memory may
| # cause paging in the operating system. Note that on 32bit systems you
| # might be limited to 2-3.5G of user level memory per process, so do not
| # set it too high.
| innodb_buffer_pool_size=46M
|
| # Size of each log file in a log group. You should set the combined size
| # of log files to about 25%-100% of your buffer pool size to avoid
| # unneeded buffer pool flush activity on log file overwrite. However,
| # note that a larger logfile size will increase the time needed for the
| # recovery process.
| innodb_log_file_size=23M
|
| # Number of threads allowed inside the InnoDB kernel. The optimal value
| # depends highly on the application, hardware as well as the OS
| # scheduler properties. A too high value may lead to thread thrashing.
| innodb_thread_concurrency=8
|
JBoss - mysql-ds.xml
| <datasources>
| <local-tx-datasource>
| <jndi-name>DefaultDS</jndi-name>
| <!--<connection-url>jdbc:mysql://./jboss</connection-url> -->
|
<connection-url>jdbc:mysql://./jboss?socketFactory=com.mysql.jdbc.NamedPipeSocketFactory&namedPipePath=\\\\.\\Pipe\\mysql.sock</connection-url>
| <driver-class>com.mysql.jdbc.Driver</driver-class>
|
| <user-name>pepe</user-name>
| <password>dakhla</password>
|
| <!--
| <connection-property
name="socketFactory">com.mysql.jdbc.NamedPipeSocketFactory</connection-property>
| -->
| <!-- should only be used on drivers after 3.22.1 with "ping" support
|
<valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name>
| -->
| <!-- sql to call when connection is created
| <new-connection-sql>some arbitrary sql</new-connection-sql>
| -->
| <!-- sql to call on an existing pooled connection when it is obtained from pool
- MySQLValidConnectionChecker is preferred for newer drivers
| <check-valid-connection-sql>some arbitrary
sql</check-valid-connection-sql>
| -->
|
| <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml -->
| <metadata>
| <type-mapping>mySQL</type-mapping>
| </metadata>
| </local-tx-datasource>
| </datasources>
|
...and this is the exception on start up the server,
| Caused by: org.xml.sax.SAXParseException: The reference to entity "namedPipePath
| " must end with the ';' delimiter.
| at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
| at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
| at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:98)
| at org.jboss.deployment.XSLSubDeployer.findDd(XSLSubDeployer.java:227)
| ... 68 more
| 13:08:56,984 INFO [TomcatDeployer] deploy, ctxPath=/jmx-console, warUrl=.../dep
| loy/jmx-console.war/
| 13:08:57,296 ERROR [URLDeploymentScanner] Incomplete Deployment listing:
|
| --- Incompletely deployed packages ---
| org.jboss.deployment.DeploymentInfo@ee96070 { url=file:/C:/jboss-4.2.2.GA/server
| /default/deploy/mysql-ds.xml }
| deployer: org.jboss.deployment.XSLSubDeployer@13d7254
| status: null
| state: FAILED
| watch: file:/C:/jboss-4.2.2.GA/server/default/deploy/mysql-ds.xml
| altDD: null
| lastDeployed: 1236514136890
| lastModified: 1236514136890
|
I was googling and I did not found any solution for this issue.
Will you help?
Best regards,
Jose Alvarez de Lara
View the original post :
http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4215987#...
Reply to the post :
http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&a...