8:17 a.m.
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563310#563310
--------------------------------------------------------------
Hi - I am having some difficulty with the sendEsbMessage quickstart when running the
client from Eclipse Galileo (the sendJMSMessage test client works fine).
I am using the following versions:
On Linux
ESB 4.8
AS jboss-6.0.0.20100216-M2
On Windows 7:
Eclipse Galileo
One obvious note is that when I create ESB Projects the wizard does not provide "ESB
4.8" as a selection - it only goes to 4.7.
Does anyone know:
If the 4.7 vs. 4.8 ESB is an issue on Galileo
If ESB 4.8 is supported on Galileo
If there is a workaround (tweaking classpaths)
When ESB 4.8 will be supported in Eclipse Galileo (or other Eclipse clients)
Below is the error:
log4j:WARN No appenders could be found for logger
(org.jboss.soa.esb.services.registry.RegistryFactory).
log4j:WARN Please initialize the log4j system properly.
Exception in thread "main"
org.jboss.soa.esb.listeners.message.MessageDeliverException:
java.lang.reflect.InvocationTargetException
at
org.jboss.soa.esb.client.ServiceInvoker.loadServiceClusterInfo(ServiceInvoker.java:545)
at org.jboss.soa.esb.client.ServiceInvoker.<init>(ServiceInvoker.java:174)
at org.jboss.soa.esb.client.ServiceInvoker.<init>(ServiceInvoker.java:155)
at org.jboss.soa.esb.client.ServiceInvoker.<init>(ServiceInvoker.java:197)
at
org.jboss.soa.esb.samples.quickstart.helloworld.test.SendEsbMessage.main(SendEsbMessage.java:56)
Caused by: org.jboss.soa.esb.services.registry.RegistryException:
java.lang.reflect.InvocationTargetException
at
org.jboss.internal.soa.esb.services.registry.JAXRRegistryImpl.findEPRs(JAXRRegistryImpl.java:348)
at
org.jboss.internal.soa.esb.services.registry.InVMRegistryInterceptor.findEPRs(InVMRegistryInterceptor.java:85)
at
org.jboss.soa.esb.services.registry.RegistryFactory$HeadRegistryInterceptor.findEPRs(RegistryFactory.java:229)
at org.jboss.soa.esb.listeners.RegistryUtil.getEprs(RegistryUtil.java:226)
at
org.jboss.soa.esb.client.ServiceInvoker.loadServiceClusterInfo(ServiceInvoker.java:532)
... 4 more
Caused by: javax.xml.registry.JAXRException: java.lang.reflect.InvocationTargetException
at
org.apache.ws.scout.registry.BusinessQueryManagerImpl.findConcepts(BusinessQueryManagerImpl.java:542)
at
org.jboss.internal.soa.esb.services.registry.JAXRRegistryImpl.getJBossESBTModel(JAXRRegistryImpl.java:653)
at
org.jboss.internal.soa.esb.services.registry.JAXRRegistryImpl.findEPRs(JAXRRegistryImpl.java:307)
... 8 more
Thanks for your time,
Ian
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563310#563310]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:45 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Brian Fitzpatrick [http://community.jboss.org/people/bfitzpat] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563318#563318
--------------------------------------------------------------
Hi Ian,
I can't speak to the issue you've encountered in ESB 4.8, but I can speak to the
tooling around it. A decision was made to support ESB 4.7 in JBoss Tools 3.1 and then we
make a jump to ESB 4.9 in JBoss Tools 3.2, which should be out in the next few months. So
we definitely don't have any explicit support for ESB 4.8 for Galileo or Helios.
That's probably not the answer you were looking for.
--Fitz
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563318#563318]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:47 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Max Andersen [http://community.jboss.org/people/max.andersen%40jboss.com] created the
discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563321#563321
--------------------------------------------------------------
...but what is so special about 4.8 that choosing 4.7 doesn't work ?
The number doesn't really force some 4.7 specific functionallity does it ?
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563321#563321]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:48 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Brian Fitzpatrick [http://community.jboss.org/people/bfitzpat] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563322#563322
--------------------------------------------------------------
Yeah, I'm not sure. I have a question out to the ESB folks now to see if they can shed
some light...
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563322#563322]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
9:43 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Tom Fennelly [http://community.jboss.org/people/tfennelly] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563333#563333
--------------------------------------------------------------
The 4.7 compatible configuration would work fine on v4.8 or v4.9. From the suers
perspective, I guess it just means they can not use the tooling to configure features
added in the 4.8 Schema.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563333#563333]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
9:54 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563336#563336
--------------------------------------------------------------
Sorry guys, but I guess I need Tom's explanation put into terms that a newbie can
understand! :-/
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563336#563336]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
10 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Brian Fitzpatrick [http://community.jboss.org/people/bfitzpat] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563339#563339
--------------------------------------------------------------
Well, I think he's saying (Tom, correct me if I'm wrong) that if you have a 4.7
ESB configuration, it'll work in 4.8 or 4.9 just fine. The JBoss Tools Galileo tooling
will allow you to create a 4.7 compatible configuration, which should work on an ESB 4.8
runtime.
Are you adding any 4.8-specific features to your configuration?
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563339#563339]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
10:38 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563347#563347
--------------------------------------------------------------
I need just one more bit of clarification on your responses - does "The JBoss Tools
Galileo tooling will allow you to create a 4.7 compatible configuration" refer to me
using the New ESB Project Wizard and selecting ESB 4.7 for my ESV 4.9 runtime?
Since this may not be a version conflict, does anyone have any suggestions based on the
stack trace above (I have tried several variations of classpaths based various discussion
threads at jboss.org.
Thanks for your patience, guys.
Ian
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563347#563347]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
10:56 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563356#563356
--------------------------------------------------------------
Brian - sorry for not answering your question regarding 4.8-specific features.
I guess the short answer is 'i don't think so' - I am only trying to run the
sendEsbMessage test client found in the helloworld quickstart sample that is distributed
with ESB 4.8.
Thanks,
Ian
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563356#563356]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
11:09 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Tim Marks [http://community.jboss.org/people/tmarks] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563361#563361
--------------------------------------------------------------
I am seeing the same issue. I tried ESB-4.7 and 4.8 and see the same error.
(The quickstart/helloworld sendesb works when run from server...but fails when run
remotely from eclipse.)
I have seen other posts indicating a similar problem - fixes typically indicate a bad
classpath.
However, when I duplicate posted classpaths, it still does not work.
Any help/insight appreciated.
Server: Linux, jboss-6.0.0.20100216-M2, ESB-4.7
Client: XP, Galileo
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563361#563361]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
11:19 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563367#563367
--------------------------------------------------------------
Tim,
I was just about try ESB 4.7 but since you are having the same problem with both ESB 4.7
and ESB 4.8, I guess I'll try another path.
Speaking of path, I also saw those threads that tackled this from the classpath angle - I
also had the same results as you. I wonder if there is something with the
jbossesb-properties.xml file that is creating havoc.
Anyway, thanks for joining!
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563367#563367]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
11:11 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Brian Fitzpatrick [http://community.jboss.org/people/bfitzpat] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563362#563362
--------------------------------------------------------------
No worries. :)
Yes, using the New ESB Project wizard and ESB File wizards is what I'm referring to -
as well as the editor when you open the ESB configuration file in the tooling. The ESB
jars that are referenced by the project should come from your referenced runtime, so it
should have the right jars specific to your runtime.
And the ESB editor shouldn't allow you to do anything that wouldn't work in ESB
4.7, and according to what Tom says - that should still run on ESB 4.8.
But I don't have any ideas on the stacktrace above unfortunately... I'll see if
the ESB team has any words of wisdom on it...
--Fitz
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563362#563362]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
11:44 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Brian Fitzpatrick [http://community.jboss.org/people/bfitzpat] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563372#563372
--------------------------------------------------------------
One of the ESB guys has these suggestions:
* my guess is that you're not picking up all the registry configuration for some
reason
* it's bombing out when looking for the ESB tmodel
*have you tried running the SendEsbMessage in in tools?
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563372#563372]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
12:21 p.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Tom Cunningham [http://community.jboss.org/people/tcunning] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563386#563386
--------------------------------------------------------------
I took a quick look at this and I can reproduce the stack if I only add the helloworld
directory to the Run Configuration classpath. It looks to me like the registry
configuration is incorrect - it is bombing out looking for a TModel.
The sendesb target in the build.xml has exec-classpath as its classpath - exec-classpath
is set in ../conf/base-build.xml. Since the ant target is working fine for me, I
think the solution is to just reproduce the exec-classpath classpath exactly in Run
Configuration.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563386#563386]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
2:59 p.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563419#563419
--------------------------------------------------------------
Tom,
Thanks - When I do an "ant echoCP" I get an extremely large list of jar files
but I'll look into it further.
There have been a couple of comments regarding the registry configuration - the
jbossesb-properties.xml file on the client side looks like this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- $Id: jbossesb-unittest-properties.xml $ -->
<!--
These options are described in the JBossESB manual.
Defaults are provided here for convenience only.
Please read through this file prior to using the system, and consider
updating the specified entries.
-->
<esb
xmlns:xsi=" http://www.w3.org/2001/XMLSchema-instance
http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="jbossesb-1_0.xsd">
<properties name="core">
<property name="org.jboss.soa.esb.jndi.server.type"
value="jboss"/>
<property name="org.jboss.soa.esb.jndi.server.url"
value="192.168.0.102"/>
<property name="org.jboss.soa.esb.persistence.connection.factory"
value="org.jboss.internal.soa.esb.persistence.format.MessageStoreFactoryImpl"/>
<property name="jboss.esb.invm.scope.default"
value="NONE"/>
</properties>
<properties name="registry">
<property name="org.jboss.soa.esb.registry.queryManagerURI"
value="org.apache.juddi.v3.client.transport.wrapper.UDDIInquiryService#inquire"/>
<property name="org.jboss.soa.esb.registry.lifeCycleManagerURI"
value="org.apache.juddi.v3.client.transport.wrapper.UDDIPublicationService#publish"/>
<property name="org.jboss.soa.esb.registry.securityManagerURI"
value="org.apache.juddi.v3.client.transport.wrapper.UDDISecurityService#secure"/>
<property name="org.jboss.soa.esb.registry.implementationClass"
value="org.jboss.internal.soa.esb.services.registry.JAXRRegistryImpl"/>
<property name="org.jboss.soa.esb.registry.factoryClass"
value="org.apache.ws.scout.registry.ConnectionFactoryImpl"/>
<property name="org.jboss.soa.esb.registry.user"
value="root"/>
<property name="org.jboss.soa.esb.registry.password"
value="root"/>
<!-- the following parameter is scout specific to set the type of communication
between scout and the UDDI (embedded, rmi, soap) -->
<property name="org.jboss.soa.esb.scout.proxy.transportClass"
value="org.apache.ws.scout.transport.LocalTransport"/>
<property name="org.jboss.soa.esb.scout.proxy.uddiVersion"
value="3.0"/>
<property name="org.jboss.soa.esb.scout.proxy.uddiNameSpace"
value="urn:uddi-org:api_v3"/>
<!-- Organization Category to be used by this deployment. -->
<property name="org.jboss.soa.esb.registry.orgCategory"
value="org.jboss.soa.esb.:category"/>
</properties>
<properties name="transports" depends="core">
<property name="org.jboss.soa.esb.mail.smtp.host"
value="localhost"/>
<property name="org.jboss.soa.esb.mail.smtp.user"
value="jbossesb"/>
<property name="org.jboss.soa.esb.mail.smtp.password"
value=""/>
<property name="org.jboss.soa.esb.mail.smtp.port"
value="25"/>
</properties>
<properties name="connection">
<property name="min-pool-size" value="5"/>
<property name="max-pool-size" value="10"/>
<property name="blocking-timeout-millis" value="5000"/>
<property name="abandoned-connection-timeout"
value="10000"/>
<property name="abandoned-connection-time-interval"
value="30000"/>
</properties>
<properties name="dbstore">
<property name="org.jboss.soa.esb.persistence.db.connection.url"
value="jdbc:hsqldb:hsql://localhost:9001/"/>
<property name="org.jboss.soa.esb.persistence.db.jdbc.driver"
value="org.hsqldb.jdbcDriver"/>
<property name="org.jboss.soa.esb.persistence.db.user"
value="sa"/>
<property name="org.jboss.soa.esb.persistence.db.pwd"
value=""/>
<property name="org.jboss.soa.esb.persistence.db.pool.initial.size"
value="2"/>
<property name="org.jboss.soa.esb.persistence.db.pool.min.size"
value="2"/>
<property name="org.jboss.soa.esb.persistence.db.pool.max.size"
value="5"/>
<!--table managed by pool to test for valid connections - created by pool
automatically -->
<property name="org.jboss.soa.esb.persistence.db.pool.test.table"
value="pooltest"/>
<!-- # of milliseconds to timeout waiting for a connection from pool -->
<property name="org.jboss.soa.esb.persistence.db.pool.timeout.millis"
value="5000"/>
<property
name="org.jboss.soa.esb.persistence.db.conn.manager"
value="org.jboss.internal.soa.esb.persistence.manager.StandaloneConnectionManager"/>
</properties>
<properties name="messagerouting">
<property name="org.jboss.soa.esb.routing.cbrClass"
value="org.jboss.internal.soa.esb.services.routing.cbr.JBossRulesRouter"/>
</properties>
</esb>
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563419#563419]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
3:38 p.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563636#563636
--------------------------------------------------------------
The problem I was having was solved - you can find it here:
http://community.jboss.org/message/563634#563634
http://community.jboss.org/message/563634 entry #33
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563636#563636]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:20 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Max Andersen [http://community.jboss.org/people/max.andersen%40jboss.com] created the
discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563757#563757
--------------------------------------------------------------
so you are saying by not choosing target runtime AS it works ?
That sounds so wrong for me - that should not cause it to fail. If it does then we got
some problem somewhere that needs fixing.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563757#563757]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
8:33 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563760#563760
--------------------------------------------------------------
Yes, when I corrected the Classpath then it still didn't work.
It worked when I made a new project and did not select a target runtime AS and used the
corrected Classpath.
I got the idea from Tim (who posted earlier in this thread - he does not select the target
runtime either.
In both cases we are running the ESB/AS remotely
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563760#563760]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
6:34 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/563778#563778
--------------------------------------------------------------
Max,
I decided to confirm things for you so I started fresh...
I built two new ESB Projects that use the sendEsbMessag sample.
The runtime errors appeared when I specified the JBoss AS target runtime during project
creation.
The runtime errors did not appear (and the appropiate text was logged in log/server.log)
when I specified <none> as the JBoss AS target runtime during project creation.
Feel free to contact me directly if you have any questions so we don't clutter this
thread - I certainly can be doing something wrong.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/563778#563778]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
7:50 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Max Andersen [http://community.jboss.org/people/max.andersen%40jboss.com] created the
discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/564113#564113
--------------------------------------------------------------
..and what happens if you target the runtime and remove the AS classpath container
afterwards ?
Does it work then ?
if yes then there must be some conflicts on the classpath.
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/564113#564113]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
6:30 a.m.
New subject: [JBoss Tools] - Re: JBoss ESB 4.8 in Eclipse
Ian Mitchell [http://community.jboss.org/people/imitchell] created the discussion
"Re: JBoss ESB 4.8 in Eclipse"
To view the discussion, visit: http://community.jboss.org/message/564165#564165
--------------------------------------------------------------
Hi Max,
Yes - when I removed the AS classpath from a project that originally had a targeted
runtime the problem went away.
So I have 2 questions
1 - why would a simple ESB aware client need to include AS jars?
2 - do you see anything glaring about the classpath in question (below)?
Here is the classpath:
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
<classpathentry kind="src" path="src"/>
<classpathentry kind="con"
path="org.eclipse.jdt.launching.JRE_CONTAINER/org.eclipse.jdt.internal.debug.ui.launcher.StandardVMType/jdk1.6.0_21">
<attributes>
<attribute name="owner.project.facets" value="jst.java"/>
</attributes>
</classpathentry>
<classpathentry kind="con"
path="org.jboss.esb.runtime.classpath/server.supplied/JBoss 6.0 Runtime 4"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/commons-codec-1.3.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/commons-collections-3.2.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/commons-configuration-1.5.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/commons-lang-2.3.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/commons-logging-1.1.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/javassist-3.6.0.GA.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jbossall-client-4.2.2.GA.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jboss-aop-jdk50-1.5.6.GA.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jbossesb-config-model-1.0.1.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jbossesb-config-model-1.1.0.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jbossesb-config-model-1.2.0.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jbossesb-registry.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jbossesb-rosetta.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jboss-messaging-client.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jboss-remoting.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/jbossts-common.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/juddi-client-3.0.1.jar"/>
<classpathentry kind="lib" path="C:/JBOSS_TEST/log4j.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/scout-1.2.1.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/stax-1.2.0.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/stax-api-1.0-2.jar"/>
<classpathentry kind="lib" path="C:/JBOSS_TEST/trove.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/uddi-ws-3.0.1.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/wstx-asl-3.2.0.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/xbean-2.2.0.jar"/>
<classpathentry kind="lib"
path="C:/JBOSS_TEST/xercesImpl-2.8.0.jar"/>
<classpathentry kind="output" path="build/classes"/>
</classpath>
Thanks for all your help!
Ian
--------------------------------------------------------------
Reply to this message by going to Community
[http://community.jboss.org/message/564165#564165]
Start a new discussion in JBoss Tools at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=1&...]
5193
days inactive
5200
days old
20 comments
6 participants
participants (6)
-
Brian Fitzpatrick -
Ian Mitchell
-
Max Andersen
-
Tim Marks
-
Tom Cunningham
-
Tom Fennelly