Hi all, In the next few days we have both the code freeze for GlassFish V3 (Monday 9th November) and the submission of the final draft of JSR-299 (on Wednesday 11th November). We are going to *try* to use the same release (1.0.0) artifacts for both events (as otherwise I will get *no* sleep at all ;-). With this in mind, the schedule is as follows: * Sunday 8th: Code freeze for API project and release CDI API and Weld SPI 1.0. - Gavin, this means any changes you want for the 1.0 JavaDoc need to be in by tomorrow morning. Please tell me if this won't happen. * Sunday 8th: Code freeze for CDI TCK and release 1.0.0.CR7 - Everyone, please let me know if you have any major outstanding commits or issues with the TCK asap - Jozef, I haven't seen any commits for the interceptors spec, what is your status?

- Shane, please confirm the TCK has been updated to the latest spec that Gavin has sent out * Sunday 8th: Code freeze for Weld core, and *hopefully* release 1.0.0 (this is contingent on me not running out of time, otherwise I will continue on Monday) - Marius, Roger, can you ping me and we can discuss whether to slip your remaining issues - this release will use the 1.0 version of the API and the 1.0.0.CR7 version of the TCK [1] * Monday 9th: GlassFish code freeze * Monday 9th: Ongoing work on TCK and ref docs, and on getting examples, Servlet, Wicket and SE integration code passing all tests and working * Tuesday 10th: Code freeze for example, ref docs, Servlet, Wicket and SE integration code and release. * Tuesday 10th: Code freeze and release of TCK 1.0.0 - We will run this against Weld 1.0.0 and verify that we still pass - Before tagging, we will update the assertions and tests to be marked 1.0.FD * Tuesday 10th: Build distribution zips for Weld and TCK, QA run sanity checks, upload to SeamFramework.org - Ondrej, can you schedule some time for this? Either your Tuesday afternoon/evening or your Wednesday morning I guess. * Wednesday 11th: Submit Final Draft of spec, TCK 1.0.0 and Weld 1.0.0 to JCP. As you can see the schedule is tight, so please ensure you have all your changes in by the freeze date, or experience my wrath ;-) Finally, thanks for all your hard work so far! Pete [1] Yes, I know this is all upside down, and we should use 1.0.0 of the TCK in Weld 1.0.0 however it gives us a little more time to add tests to the TCK, so is worth the weirdness. _______________________________________________ weld-dev mailing list weld-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/weld-dev

Hi all, In the next few days we have both the code freeze for GlassFish V3 (Monday 9th November) and the submission of the final draft of JSR-299 (on Wednesday 11th November). We are going to *try* to use the same release (1.0.0) artifacts for both events (as otherwise I will get *no* sleep at all ;-). With this in mind, the schedule is as follows: * Sunday 8th: Code freeze for API project and release CDI API and Weld SPI 1.0. - Gavin, this means any changes you want for the 1.0 JavaDoc need to be in by tomorrow morning. Please tell me if this won't happen. * Sunday 8th: Code freeze for CDI TCK and release 1.0.0.CR7 - Everyone, please let me know if you have any major outstanding commits or issues with the TCK asap - Jozef, I haven't seen any commits for the interceptors spec, what is your status? - Shane, please confirm the TCK has been updated to the latest spec that Gavin has sent out * Sunday 8th: Code freeze for Weld core, and *hopefully* release 1.0.0 (this is contingent on me not running out of time, otherwise I will continue on Monday) - Marius, Roger, can you ping me and we can discuss whether to slip your remaining issues - this release will use the 1.0 version of the API and the 1.0.0.CR7 version of the TCK [1] * Monday 9th: GlassFish code freeze * Monday 9th: Ongoing work on TCK and ref docs, and on getting examples, Servlet, Wicket and SE integration code passing all tests and working * Tuesday 10th: Code freeze for example, ref docs, Servlet, Wicket and SE integration code and release. * Tuesday 10th: Code freeze and release of TCK 1.0.0 - We will run this against Weld 1.0.0 and verify that we still pass - Before tagging, we will update the assertions and tests to be marked 1.0.FD * Tuesday 10th: Build distribution zips for Weld and TCK, QA run sanity checks, upload to SeamFramework.org - Ondrej, can you schedule some time for this? Either your Tuesday afternoon/evening or your Wednesday morning I guess. * Wednesday 11th: Submit Final Draft of spec, TCK 1.0.0 and Weld 1.0.0 to JCP. As you can see the schedule is tight, so please ensure you have all your changes in by the freeze date, or experience my wrath ;-) Finally, thanks for all your hard work so far! Pete [1] Yes, I know this is all upside down, and we should use 1.0.0 of the TCK in Weld 1.0.0 however it gives us a little more time to add tests to the TCK, so is worth the weirdness. _______________________________________________ weld-dev mailing list weld-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/weld-dev

On 8 Nov 2009, at 16:34, Pete Muir wrote: > FYI, There is a code freeze at 20:00 UTC/GMT for both these > projects; I will mail again when it is over. The core, extensions, > examples and docs are unaffected by this, so David, Marius, anyone > else dedicated enough to be working today, you're free to keep > going :-) Sorry, I meant to add the freeze on core is delayed until 11am UTC/GMT tomorrow to allow Marius time to finish up his issues (and me time to get out of bed in the morning ;-)

On 9 Nov 2009, at 15:53, Pete Muir wrote: > > On 8 Nov 2009, at 20:02, Pete Muir wrote: > >> >> On 8 Nov 2009, at 16:34, Pete Muir wrote: >> >>> FYI, There is a code freeze at 20:00 UTC/GMT for both these >>> projects; I will mail again when it is over. The core, extensions, >>> examples and docs are unaffected by this, so David, Marius, anyone >>> else dedicated enough to be working today, you're free to keep >>> going :-) >> >> Sorry, I meant to add the freeze on core is delayed until 11am UTC/ >> GMT >> tomorrow to allow Marius time to finish up his issues (and me time >> to >> get out of bed in the morning ;-) > > I have tagged and staged the Weld core to http://oss.sonatype.org/content/repositories/orgjbossweld-075/ > , I won't promote this to a build until we've had a good chance to > test the examples, servlet integration, wicket integration and Java > SE support with these artifacts. BTW I should say, if you want to give these artifacts a go, add this to your ~/.m2/settings.xml: <profile> <id>weld-staging</id> <activation> <activeByDefault>true</activeByDefault> </activation> <repositories> <repository> <id>oss.sonatype.org/weld-staging</id> <releases> <enabled /> </releases> <url>http://oss.sonatype.org/content/repositories/ orgjbossweld-075</url> </repository> </repositories> </profile> _______________________________________________ weld-dev mailing list weld-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/weld-dev

On 8 Nov 2009, at 20:02, Pete Muir wrote: > > On 8 Nov 2009, at 16:34, Pete Muir wrote: > >> FYI, There is a code freeze at 20:00 UTC/GMT for both these >> projects; I will mail again when it is over. The core, extensions, >> examples and docs are unaffected by this, so David, Marius, anyone >> else dedicated enough to be working today, you're free to keep >> going :-) > > Sorry, I meant to add the freeze on core is delayed until 11am UTC/ > GMT > tomorrow to allow Marius time to finish up his issues (and me time to > get out of bed in the morning ;-) I have tagged and staged the Weld core to http://oss.sonatype.org/content/repositories/orgjbossweld-075/ , I won't promote this to a build until we've had a good chance to test the examples, servlet integration, wicket integration and Java SE support with these artifacts. So, please tread very carefully in core until I give the go ahead :-) Pete _______________________________________________ weld-dev mailing list weld-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/weld-dev

All, this code freeze is now over, and these artifacts have been published. On 8 Nov 2009, at 16:34, Pete Muir wrote: > FYI, There is a code freeze at 20:00 UTC/GMT for both these projects; > I will mail again when it is over. The core, extensions, examples and > docs are unaffected by this, so David, Marius, anyone else dedicated > enough to be working today, you're free to keep going :- _______________________________________________ weld-dev mailing list weld-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/weld-dev