9:42 a.m.
A section has been added to http://community.jboss.org/docs/DOC-14839 with some examples
on how to configure Infinispan programmatically from 5.0 onwards.
Any feedback appreciated
Cheers,
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
11:57 a.m.
Nice. Perhaps you need a few "basic" configs though? Stuff that people would
typically use? A lot of your examples demonstrate some of the more complex config
examples (custom marshallers and interceptors). I think a lot of first-time users will
try and copy these into their IDEs and expect a useable system. :)
Maybe you should have the examples only depict "common" options, like cluster
mode, cache stores, some simple locking and JTA config, eviction and expiry?
Cheers
Manik
On 16 May 2011, at 08:42, Galder Zamarreño wrote:
A section has been added to http://community.jboss.org/docs/DOC-14839
with some examples on how to configure Infinispan programmatically from 5.0 onwards.
Any feedback appreciated
Cheers,
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
--
Manik Surtani
manik(a)jboss.org
twitter.com/maniksurtani
Lead, Infinispan
http://www.infinispan.org
12:05 p.m.
On 11-05-16 11:57 AM, Manik Surtani wrote:
Nice. Perhaps you need a few "basic" configs though?
Stuff that people would typically use? A lot of your examples demonstrate some of the
more complex config examples (custom marshallers and interceptors). I think a lot of
first-time users will try and copy these into their IDEs and expect a useable system. :)
I thought the exact same thing. People want to get Infinispan up and
running in 2 minutes. We should be really aware of this and make sure
all our code samples are as generic as it gets.
Maybe you should have the examples only depict "common"
options, like cluster mode, cache stores, some simple locking and JTA config, eviction and
expiry?
Cheers
Manik
On 16 May 2011, at 08:42, Galder Zamarreño wrote:
3:52 p.m.
On May 16, 2011, at 12:05 PM, Vladimir Blagojevic wrote:
On 11-05-16 11:57 AM, Manik Surtani wrote:
> Nice. Perhaps you need a few "basic" configs though? Stuff that people
would typically use? A lot of your examples demonstrate some of the more complex config
examples (custom marshallers and interceptors). I think a lot of first-time users will
try and copy these into their IDEs and expect a useable system. :)
I thought the exact same thing. People want to get Infinispan up and
running in 2 minutes. We should be really aware of this and make sure
all our code samples are as generic as it gets.
In some way, that's what I was trying to do with the last of the examples in
http://community.jboss.org/docs/DOC-14839 but maybe it's a bit too much to have in one
go.
I'll add some smaller examples and move some of the other more exoteric configs to a
separate section
> Maybe you should have the examples only depict "common" options, like
cluster mode, cache stores, some simple locking and JTA config, eviction and expiry?
>
> Cheers
> Manik
>
> On 16 May 2011, at 08:42, Galder Zamarreño wrote:
>
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
5:15 p.m.
Feedback taken onboard: http://community.jboss.org/docs/DOC-14839
On May 16, 2011, at 12:05 PM, Vladimir Blagojevic wrote:
On 11-05-16 11:57 AM, Manik Surtani wrote:
> Nice. Perhaps you need a few "basic" configs though? Stuff that people
would typically use? A lot of your examples demonstrate some of the more complex config
examples (custom marshallers and interceptors). I think a lot of first-time users will
try and copy these into their IDEs and expect a useable system. :)
I thought the exact same thing. People want to get Infinispan up and
running in 2 minutes. We should be really aware of this and make sure
all our code samples are as generic as it gets.
> Maybe you should have the examples only depict "common" options, like
cluster mode, cache stores, some simple locking and JTA config, eviction and expiry?
>
> Cheers
> Manik
>
> On 16 May 2011, at 08:42, Galder Zamarreño wrote:
>
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
10:26 p.m.
On 11-05-16 5:15 PM, Galder Zamarreño wrote:
Feedback taken onboard: http://community.jboss.org/docs/DOC-14839
On May 16, 2011, at 12:05 PM, Vladimir Blagojevic wrote:
Excellent wiki Galder! Finally worth its title (Configuring cache
programmatically)
Cheers.
10:37 p.m.
I guess I qualify as "others", since I'm looking at similar issues.
Got read lock
java.util.concurrent.TimeoutException: Thread-1 could not obtain exclusive processing lock
after 3 seconds. Locks in question are
java.util.concurrent.locks.ReentrantReadWriteLock$ReadLock@16aa37a6[Read locks = 1] and
java.util.concurrent.locks.ReentrantReadWriteLock$WriteLock@12b7eea[Unlocked]
This is on the latest master.
Erik
-----Original Message-----
From: infinispan-dev-bounces(a)lists.jboss.org
[mailto:infinispan-dev-bounces@lists.jboss.org] On Behalf Of Vladimir Blagojevic
Sent: Monday, May 16, 2011 4:27 PM
To: infinispan -Dev List
Cc: Galder Zamarreño
Subject: Re: [infinispan-dev] Fluent configuration wiki update
On 11-05-16 5:15 PM, Galder Zamarreño wrote:
Feedback taken onboard: http://community.jboss.org/docs/DOC-14839
On May 16, 2011, at 12:05 PM, Vladimir Blagojevic wrote:
Excellent wiki Galder! Finally worth its title (Configuring cache
programmatically)
Cheers.
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
The information contained in this message is legally privileged and confidential, and is
intended for the individual or entity to whom it is addressed (or their designee). If this
message is read by anyone other than the intended recipient, please be advised that
distribution of this message, in any form, is strictly prohibited. If you have received
this message in error, please notify the sender immediately and delete or destroy all
copies of this message.
11:28 a.m.
Hmmm, I suppose you meant to answer a different thread? :)
On May 16, 2011, at 10:37 PM, Erik Salter wrote:
I guess I qualify as "others", since I'm looking at
similar issues.
Got read lock
java.util.concurrent.TimeoutException: Thread-1 could not obtain exclusive processing
lock after 3 seconds. Locks in question are
java.util.concurrent.locks.ReentrantReadWriteLock$ReadLock@16aa37a6[Read locks = 1] and
java.util.concurrent.locks.ReentrantReadWriteLock$WriteLock@12b7eea[Unlocked]
This is on the latest master.
Erik
-----Original Message-----
From: infinispan-dev-bounces(a)lists.jboss.org
[mailto:infinispan-dev-bounces@lists.jboss.org] On Behalf Of Vladimir Blagojevic
Sent: Monday, May 16, 2011 4:27 PM
To: infinispan -Dev List
Cc: Galder Zamarreño
Subject: Re: [infinispan-dev] Fluent configuration wiki update
On 11-05-16 5:15 PM, Galder Zamarreño wrote:
> Feedback taken onboard: http://community.jboss.org/docs/DOC-14839
>
> On May 16, 2011, at 12:05 PM, Vladimir Blagojevic wrote:
>
Excellent wiki Galder! Finally worth its title (Configuring cache
programmatically)
Cheers.
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
The information contained in this message is legally privileged and confidential, and is
intended for the individual or entity to whom it is addressed (or their designee). If this
message is read by anyone other than the intended recipient, please be advised that
distribution of this message, in any form, is strictly prohibited. If you have received
this message in error, please notify the sender immediately and delete or destroy all
copies of this message.
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
12:08 p.m.
This is a very good idea and additionally I'd like to include a few basic config
xml files in my plugin.
I started working on a fluent config in Groovy over last Christmas (yes
Christmas, and I was in Paris too) and I didn't finish it although I did get
quite close. I need to take a look at this and take note of a few things because
I was stuck on one part which is why I put it on hold. If it makes sense, I'll
complete it and add it back into the plugin.
T
________________________________
From: Manik Surtani <manik(a)jboss.org>
To: infinispan -Dev List <infinispan-dev(a)lists.jboss.org>
Sent: Mon, 16 May, 2011 10:57:20
Subject: Re: [infinispan-dev] Fluent configuration wiki update
Nice. Perhaps you need a few "basic" configs though? Stuff that people would
typically use? A lot of your examples demonstrate some of the more complex
config examples (custom marshallers and interceptors). I think a lot of
first-time users will try and copy these into their IDEs and expect a useable
system. :)
Maybe you should have the examples only depict "common" options, like cluster
mode, cache stores, some simple locking and JTA config, eviction and expiry?
Cheers
Manik
On 16 May 2011, at 08:42, Galder Zamarreño wrote:
A section has been added to http://community.jboss.org/docs/DOC-14839
with some
examples on how to configure Infinispan programmatically from 5.0 onwards.
Any feedback appreciated
Cheers,
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
--
Manik Surtani
manik(a)jboss.org
twitter.com/maniksurtani
Lead, Infinispan
http://www.infinispan.org
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
5:12 p.m.
Good stuff!
My only note is that there are some code snippets that are not "code":
E.g. "To enable global JMX statistics simply do:"
Or was that the intent?
On 16 May 2011, at 08:42, Galder Zamarreño wrote:
A section has been added to http://community.jboss.org/docs/DOC-14839
with some examples on how to configure Infinispan programmatically from 5.0 onwards.
Any feedback appreciated
Cheers,
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
5:15 p.m.
Hmmm, maybe you caught me in the middle of updating the wiki? Check the link again...
On May 16, 2011, at 5:12 PM, Mircea Markus wrote:
Good stuff!
My only note is that there are some code snippets that are not "code":
E.g. "To enable global JMX statistics simply do:"
Or was that the intent?
On 16 May 2011, at 08:42, Galder Zamarreño wrote:
> A section has been added to http://community.jboss.org/docs/DOC-14839 with some
examples on how to configure Infinispan programmatically from 5.0 onwards.
>
> Any feedback appreciated
>
> Cheers,
> --
> Galder Zamarreño
> Sr. Software Engineer
> Infinispan, JBoss Cache
>
>
> _______________________________________________
> infinispan-dev mailing list
> infinispan-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/infinispan-dev
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
5:17 p.m.
yes, looks good.
On 16 May 2011, at 16:15, Galder Zamarreño wrote:
Hmmm, maybe you caught me in the middle of updating the wiki? Check
the link again...
On May 16, 2011, at 5:12 PM, Mircea Markus wrote:
> Good stuff!
> My only note is that there are some code snippets that are not "code":
> E.g. "To enable global JMX statistics simply do:"
> Or was that the intent?
>
> On 16 May 2011, at 08:42, Galder Zamarreño wrote:
>
>> A section has been added to http://community.jboss.org/docs/DOC-14839 with some
examples on how to configure Infinispan programmatically from 5.0 onwards.
>>
>> Any feedback appreciated
>>
>> Cheers,
>> --
>> Galder Zamarreño
>> Sr. Software Engineer
>> Infinispan, JBoss Cache
>>
>>
>> _______________________________________________
>> infinispan-dev mailing list
>> infinispan-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/infinispan-dev
>
> _______________________________________________
> infinispan-dev mailing list
> infinispan-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/infinispan-dev
--
Galder Zamarreño
Sr. Software Engineer
Infinispan, JBoss Cache
_______________________________________________
infinispan-dev mailing list
infinispan-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/infinispan-dev
4981
days inactive
4982
days old
infinispan-dev@lists.jboss.org
11 comments
6 participants
participants (6)
-
Erik Salter -
Galder Zamarreño -
Manik Surtani -
Mircea Markus -
Thomas P. Fuller -
Vladimir Blagojevic