Notification of shutdown commencing
by Brian Stansberry
I can't figure out a way to produce a notification of an impending
server shutdown if a user does a soft kill of the server process.
It's easy enough if shutdown is initiated by a management op; the op
handler can trigger the notification. But a soft kill triggers a
shutdown hook registered by the MSC ServiceContainer, and once that
starts, services start stopping semi-randomly and its too late to notify
anyone that that is going to start happening.
The MSC shutdown stuff isn't exposed, so there's no way to tie into
that. Adding another shutdown hook doesn't help as there's no
predictable order of execution.
--
Brian Stansberry
Principal Software Engineer
JBoss by Red Hat
12 years, 5 months
Graceful Shutdown (Revision 2)
by Jason T. Greene
*EDITED*
We've worked out the rough outline of how graceful shutdown will work in
AS7.
The process of graceful shutdown actually is reflected by a number of
states:
1. Running - all services acting normally
2. Suspending - services refuse new "permits" (see below), existing
permits are allowed to be retained (and threads running under such a
permit may still acquire new permits)
3. Suspended - no permits are present and none may be issued
4. Shutting Down - our existing server stop process / reload admin mode
The following transitions are allowed:
1. Running → Suspending: Transition occurs at user request (to suspend
or gracefully shut down).
2. Suspending → Suspended: Transition occurs when all permits are cleared.
3. Suspending → Running: Transition occurs at user request (to exit
suspend mode or cancel graceful shutdown before it completes).
4. Suspended → Running: Transition occurs at user request (to exit
suspend mode).
5. Suspended → Shutting Down: Transition occurs automatically (if a
graceful shutdown was requested) or at user request (if a shut down
request of any kind is entered in the Suspended state).
6. Running → Shutting Down: Transition occurs at user request (to shut
down the server "un-gracefully").
7. Suspending → Shutting Down (User aborts a graceful shutdown)
These "permits" are issued by the "Shutdown Manager", whose job is to
manage these states. They are issued corresponding to the following events:
1. The invocation of an EJB method
2. The creation of a web session
3. A creation of a transaction
4. MessageEndpoint and WorkManager aquire permit allowing for release()
from a thirdparty to indicate connection close.
When a permit cannot be issued due to the server shutting down, a
standard exception message should be produced so that the user can see a
familiar error message regardless of what mechanism is used to access
the server.
--
- DML
_______________________________________________
jboss-as7-dev mailing list
jboss-as7-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
13 years
Pull Request Retesting Ability
by Jason T. Greene
FYI,
If you submit a pull request and the test fails due to a possible
intermittent failure or some environmental problem (github was down or
something), instead of rebasing your patch to force a retest, you can
now just ask with a phrase that has "retest this please":
Could you retest this please?
jboss-as-pull-request, you are awesome, now go retest this please!
etc
--
Jason T. Greene
JBoss AS Lead / EAP Platform Architect
JBoss, a division of Red Hat
13 years, 1 month
Use of CLI to add security-domain
by Wolf-Dieter Fink
Hi,
I try to add this to the standalone.xml via CLI:
<subsystem xmlns="urn:jboss:domain:security:1.2">
<security-domains>
....
<security-domain name="lbank" cache-type="default">
<authentication>
<login-module code="UsersRoles" flag="required">
<module-option name="usersProperties"
value="${jboss.server.config.dir}/lbank-users.properties"/>
<module-option name="rolesProperties"
value="${jboss.server.config.dir}/lbank-roles.properties"/>
<module-option name="password-stacking"
value="useFirstPass"/>
</login-module>
</authentication>
</security-domain>
If I add it to XML the CLI will show:
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank:read-resource(recursive=true)
{
"outcome" => "success",
"result" => {
"acl" => undefined,
"audit" => undefined,
"authorization" => undefined,
"cache-type" => "default",
"identity-trust" => undefined,
"jsse" => undefined,
"mapping" => undefined,
"authentication" => {"classic" => {"login-modules" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]}}
}
}
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:read-attribute(name=login-modules)
{
"outcome" => "success",
"result" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]
}
/
#simple is
//subsystem=security/security-domain=lbank:add(cache-type=default)/
but how to know that "classic" must used?
//subsystem=security/security-domain=lbank/authentication=/
tab completition will not help, only if I type =classic: the tab
completition will show commands otherwise not
I suppose that this should be correct, but it shows an error:
EAP6
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014688: Wrong type for value.
Expected [LIST] but was STRING",
"rolled-back" => true
}
/
AS7.2 (upstream)
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014807: Management resource '[
(\"subsystem\" => \"security\"),
(\"security-domain\" => \"lbank2\"),
(\"authentication\" => \"classic\")
]' not found",
"rolled-back" => true
}/
Next difficulty is to add the module-options with expressions.
Any guiding or help?
Wolf
BTW the CLI tab completition crash:
//subsystem=security/security-domain=lbankx/authentication=(
java.lang.IllegalArgumentException: The argument value is not specified
for name: 'null'
at
org.jboss.as.cli.operation.impl.DefaultOperationRequestBuilder.addProperty(DefaultOperationRequestBuilder.java:113)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:208)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:51)
at
org.jboss.as.cli.operation.OperationRequestCompleter.complete(OperationRequestCompleter.java:142)
at org.jboss.as.cli.CommandCompleter.complete(CommandCompleter.java:93)
at org.jboss.as.cli.impl.Console$Factory$1$1.complete(Console.java:96)
at org.jboss.jreadline.console.Console.complete(Console.java:809)
at org.jboss.jreadline.console.Console.read(Console.java:383)
at org.jboss.jreadline.console.Console.read(Console.java:221)
at org.jboss.as.cli.impl.Console$Factory$1.readLine(Console.java:166)
at
org.jboss.as.cli.impl.CommandContextImpl.interact(CommandContextImpl.java:1129)
at org.jboss.as.cli.impl.CliLauncher.main(CliLauncher.java:243)
at org.jboss.as.cli.CommandLineMain.main(CommandLineMain.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.jboss.modules.Module.run(Module.java:270)
at org.jboss.modules.Main.main(Main.java:294)
/
13 years, 1 month
problem with the classloader, not able to load a JDBC driver
by Flemming Harms
Hi
I'm trying to finish https://issues.jboss.org/browse/AS7-1371 but I ran
into a problem with the class loader. I need way to load the class for a
specified JDBC driver, but I can't seem to figure out how to make it
available on the classpath too my authentication service.
I try to load the connection class like this, and testing it with the
existing H2 JDBC driver:
ClassLoader original = null;
try {
original = Thread.currentThread().getContextClassLoader();
if (original != null) {
Thread.currentThread().setContextClassLoader(null);
}
Class.forName(this.driver).newInstance();
} finally {
if (original != null) {
Thread.currentThread().setContextClassLoader(original);
}
}
The user can setup a outbound connection to a database for authentication,
by using the configuration below
<security-realm name="ManagementRealm">
<authentication>
<local default-user="$local"/>
<database connection="db" plain-text="true">
<!-- simple-select-users table="users" username-field="user"
password-field="password"/ -->
<sql-select-users sql="select user,password from users where
user = ?" />
</database>
</authentication>
</security-realm>
<outbound-connections>
<database>
<connection driver="org.h2.jdbcx.JdbcDataSource" name="db"
url="jdbc:h2:/tmp/test;DB_CLOSE_DELAY=-1" username="sa" password=""
min-pool-size="10" max-pool-size="20" />
</database>
</outbound-connections>
Any suggestions how to solve this?
Thanks!
br
Flemming
13 years, 2 months
Help with intermittent tests & Build failure notifications
by Jason T. Greene
Hi everyone,
Our stability of the testsuite has improved quite a bit but we are still
seeing occasional failures. I will be away on paternity leave so won't
be able to continue this work for a couple weeks. Kabir will be looking
into and/or disabling problematic tests, but if you could give him a
hand it would be much appreciated, and it will ultimately end up saving
everyone's time chasing false positives (especially with pull requests).
To help with this I have set the lightning jobs to email the dev list on
any failure. It might start off a bit noisy, but once we have a stable
test suite, these should be less common, and you will know it's
something serious.
Thanks!
--
Jason T. Greene
JBoss AS Lead / EAP Platform Architect
JBoss, a division of Red Hat
13 years, 2 months
Help with "New missing/unsatisfied dependencies" problem
by Flemming Harms
Hello all,
I'm trying to finish "Domain Management - Add support for database
authentication.", but the servers in domain mode starts up with an error
and the log indicate missing dependencies. I have been debugging and to
what I can tell all services is started. If I run in standalone mode
everything is working fine.
[Server:server-one] 12:00:16,723 INFO [org.jboss.as.controller]
(Controller Boot Thread) JBAS014774: Service status report
[Server:server-one] JBAS014775: New missing/unsatisfied dependencies:
[Server:server-one] service
jboss.server.controller.management.connection_manager.db (missing)
dependents: [service
jboss.server.controller.management.security_realm.ManagementRealm.database_authentication,
service
jboss.server.controller.management.security_realm.ApplicationRealm.database_authorization,
service
jboss.server.controller.management.security_realm.ApplicationRealm.database_authentication]
[Server:server-one]
[Server:server-one] 12:00:16,727 ERROR [org.jboss.as] (Controller Boot
Thread) JBAS015875: JBoss AS 7.2.0.Alpha1-SNAPSHOT "Steropes" started (with
errors) in 523167ms - Started 219 of 306 services (6 services failed or
missing dependencies, 80 services are passive or on-demand)
https://github.com/fharms/jboss-as/tree/AS7-1370
I have attached the configuration files
Any suggestions to where I should look or what it could be?
Thanks
13 years, 2 months
