August 2009 - jboss-user - Jboss List Archives

[JBoss AOP Users] - Re: Deploy AOP to jboss 5.1

by kabir.khan＠jboss.com

Correct, if you deploy an EJB 3 bean it constructs an EJB container without weaving. The configuration for these containers is in ejb3-interceptors-aop.xml. Calls to the ejb are done via the container and go through the stack of interceptors before hitting the ejb. For example, if you deploy a stateless session bean it will use the | <domain name="Stateless Bean" extends="Intercepted Bean" inheritBindings="true"> | which uses pointcuts to apply the different interceptors that make up the container. e.g. the | <interceptor-ref name="org.jboss.ejb3.tx.CMTTxInterceptorFactory"/> | looks for the TransactionAttribute annotations on the different methods and applies the correct transactions. You can either add to these domains in ejb3-interceptors-aop.xml in which case it will apply to all beans matching your pointcuts, or you can create a custom domain with more bindings and choose to apply it to a particular bean using the @AspectDomain annotation http://www.jboss.org/ejb3/docs/tutorial/configuration/configuration.html explains more about this. You can get there by going to http://www.jboss.org/community/wiki/EJB3 and then 'Tutorial' and then 'Custom configuration' View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4252002#4252002 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4252002

15 years, 3 months

1
0
0 / 0

[JBoss Messaging Users] - paging problem with orderingGroup enabled

by mclu

Hi Howard! I solved the orderinggroup handling by using one group and enabled it via connectionfactory. But now after my Server starts up and reloads the paged messages it stops after the first set of messages are received. Means: To Test I have set fullsize to 20 and pagesize and downcache to 5. My queue has 2000 messages. After I received the first 20 messages the system stops. The database still contains messages and while debugging I also see that each 5 consumed messages the JDBCPersistenceManager.getPagedReferenceInfos() is called to load and add the next paged messages. I also saw that the internal messageRef List contains these reloaded messages. But still, after the 20th message the consuming stops. I first thought that its because of my self written transaction aware consumer that also receives message in order. But after I refactored this back to MessageDrivenBean the same error occurs. My setup: Queue: | <mbean code="org.jboss.jms.server.destination.QueueService" | name="jboss.messaging.destination:service=Queue,name=incomingSyncRequests" | xmbean-dd="xmdesc/Queue-xmbean.xml"> | <depends optional-attribute-name="ServerPeer"> | jboss.messaging:service=ServerPeer | </depends> | <attribute name="FullSize">20</attribute> | <attribute name="PageSize">5</attribute> | <attribute name="DownCacheSize">5</attribute> | </mbean> | MDB: | @MessageDriven(activationConfig = { | @ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue"), | @ActivationConfigProperty(propertyName = "destination", propertyValue = IMConstants.QUEUE_INCOMINGSYNCREQUESTS), | @ActivationConfigProperty(propertyName = "maxSession", propertyValue = "1"), | @ActivationConfigProperty(propertyName = "maxMessages", propertyValue = "1") }) | public class GlobalMessageDispatcherBean implements MessageListener { | .... | CF: | <mbean code="org.jboss.jms.server.connectionfactory.ConnectionFactory" name="jboss.messaging.connectionfactory:service=ConnectionFactory" xmbean-dd="xmdesc/ConnectionFactory-xmbean.xml"> | <depends optional-attribute-name="ServerPeer">jboss.messaging:service=ServerPeer</depends> | <depends optional-attribute-name="Connector">jboss.messaging:service=Connector,transport=sslbisocket</depends> | <depends>jboss.messaging:service=PostOffice</depends> | | <attribute name="JNDIBindings"> | <bindings> | <binding>/ConnectionFactory</binding> | <binding>/XAConnectionFactory</binding> | <binding>java:/ConnectionFactory</binding> | <binding>java:/XAConnectionFactory</binding> | </bindings> | </attribute> | <attribute name="EnableOrderingGroup">true</attribute> | <attribute name="DefaultOrderingGroupName">IMSDefaultGroup</attribute> | </mbean> | Maybe it has to do with this singleton MDB configuration but it should work with it too, or? Using JBM 1.4.5 build 7766 View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251996#4251996 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251996

15 years, 3 months

1
0
0 / 0

[jBPM Users] - Re: JobScheduler going crazy - ignoring wait

by kukeltje

Could you keep us posted? Afaik, jBPM should be able to recover from this in a specific amount of time. If this is not your experience, please report that here to. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251991#4251991 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251991

15 years, 3 months

1
0
0 / 0

[JBoss Portal Users] - Re: How to implement BreadCrumb

by BobBuilder

"lentinig" wrote : I have created a custom tabs.jsp for my application but i don't know how i get the current node from the PortalNode or other. I use jboss portal 2.7. Can you help me please? | | Thanks a lot | As i have the same problem i would like to know the same... View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251990#4251990 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251990

15 years, 3 months

1
0
0 / 0

[JBoss AOP Users] - jboss-aop 1.5 compiletime weaved code on jbossaop 2.1

by afloom

Hi, I have an application (an ejb jar) that was compiletime weaved using jboss-aop 1.5 (1.5.5 I believe) that I'm trying to deploy on JBoss EAP 5.0 BETA (which contains jboss-aop 2.1.3). Should this work? I can't get it to work and I'm trying to figure out what the problem is. What I have is pointcut bindings declared through xml. It is deployed separately together with my interceptors in an .aop file My (aop) interceptors are not called, but other than that my application (the ejb) works. A quick "this should work" or "no, it doesn't work" would be great. I found a thread saying that code compiletime weaved with jboss-aop 2.0 should work on 1.5, but this is the other way around. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251977#4251977 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251977

15 years, 3 months

1
0
0 / 0

[Security] - Re: Logging fail authorization checks

by Wolfgang Knauf

Hi, to activate logging of the security layer: see sticky post "FAQ" in this forum, question 4. You might dig through the log to find out which category provides you with the failed authorizations. Hope this is what you need ;-) Wolfgang View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251971#4251971 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251971

15 years, 3 months

1
0
0 / 0

[jBPM Users] - Re: How to control process transition in JBPM 4.0?

by jbarrez

Ronald has pointed out already that your process will always continue if you use a 'java' task. It's not for nothing the 'java' task is listed under automatic activitites. If you want to halt process execution, you need to use wait states or tasks. These will halt your process until you trigger them to continue. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251967#4251967 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251967

15 years, 3 months

1
0
0 / 0

[JBoss Web Services Users] - Re: proxy server tunneling https connection to backend jboss

by richard.opalka＠jboss.com

And do you use static WSDLs or it is generated for you on demand? View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251959#4251959 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251959

15 years, 3 months

1
0
0 / 0

[JBoss Web Services Users] - Re: proxy server tunneling https connection to backend jboss

by richard.opalka＠jboss.com

Is your endpoint EJB or POJO? View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251958#4251958 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251958

15 years, 3 months

1
0
0 / 0

[jBPM Users] - Re: BUILD FAILED and deployment failed: Internal server Er

by sutiantian

I got exactly the same error and struggle for two days already. did you get your solution? if you have one, could you please post here? that would be very helpful. Thanks! View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4251954#4251954 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4251954

15 years, 3 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user August 2009