May 2007 - jboss-user - Jboss List Archives

[JBoss Portal] - Re: JBoss WSRP consumer and file uploads

by superfilin

Just some details: JBoss Portal: 2.6.0-CR2-bundled View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043828#4043828 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043828

19 years

1
0
0 / 0

[JBoss Seam] - Re: Two war files with the same code base

by hvram

Hi I am assuming you are referring to the Isolation and CallByAttribute values in the ear-deployer.xml It was false . I set both the values to true and it still did not make any difference . Should I also set the use JBossWebClassLoader to true in the jboss-service.xml ( It is false now ? ) Regards Hari View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043827#4043827 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043827

19 years

1
0
0 / 0

[JBoss jBPM] - Assigning task to mutiple actors

by naseem.k

Hi, I am using JBPM version 3 and I have a requirement where I need to assign a task to mutiple actor say to bert and ernie. This is how I did by swimlanes. A new swimlane I created whose Assignment type is expression. In the expression, I wrote user(bert, ernie). Process was also deployed correctly on server deployer /jbpm/upload but I got exception when I accessed that particular task. Can anyone please help me is there any way by which we can assign same task to multiple actorIds. Any pointer on this would be highly appreciated. Thanks Naseem View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043826#4043826 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043826

19 years

1
0
0 / 0

[JBoss jBPM] - Re: fault never reaches catchall

by meghanai_99

Hello Alex, I have been struggling to get JBPM ear and JBPM-BPEL extension working on JBoss 4.0.5.GA. My current status is that after deploying ear and then bpel war, the deploy servlet is trying to deploy the sent zip as jpdl process instead of BPEL. That tells me my jbpm-cfg.xml is not found or conflicting with the one in ear file. I would greatly appreciate if you can modify the wiki page to add steps for getting the JBPM engine on JBoss running. Thanks, Meghana View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043824#4043824 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043824

19 years

1
0
0 / 0

[Installation, Configuration & Deployment] - Multiple jboss instance - database lock

by dwarakanathan

Hi, I have a multiple instance JBoss. I face this Database lock issue. Actually i dont need any database for my 2nd instance. How do i remove it ? WARN [ServiceController] Problem starting service jboss:service=Hypersonic,database=localDB java.sql.SQLException: The database is already in use by another process: org.hsqldb.persist.NIOLockFile@114fd341[file =/....//.../data/hypersonic/localDB.lck, exists=true, locked=false, valid=false, fl =null]: java.lang.Exception: checkHeartbeat(): lock file [/u/hcdev101/apps/hca/jboss/server/logviewer/data/hypersonic/localDB.lck] is presumably locked by another process. Thanks !!m View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043823#4043823 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043823

19 years

1
0
0 / 0

[JBoss jBPM] - Re: Interaction between two actors

by avivstav

Hi I understand the point but in chapter 9 in JBPM tutorial http://docs.jboss.com/jbpm/v3/userguide/processmodelling.html section 9.3.1 they talk about node responsibilitiesto propagate the execution, anonymous wrote : 1. not propagate the execution. In that case the node behaves as a wait state. | 2. propagate the execution over one of the leaving transitions of the node. This means that the token that originally arrived in the node is passed over one of the leaving transitions with the API call executionContext.leaveNode(String). The node will now act as an automatic node in the sense it can execute some custom programming logic and then continue process execution automatically without waiting. So what is it refers to? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043822#4043822 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043822

19 years

1
0
0 / 0

[Clustering/JBoss] - Re: Request not redirecting to the server in the cluster.. H

by PriyaP

I changed the listener port from 8080 to 8009 and works fine.. Thanks for your help !!! View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043820#4043820 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043820

19 years

1
0
0 / 0

JBoss AS 4.2.0 GA schedule changed?

by thriller yan

Hi, I'm expecting to see the JBoss 4.2.0 GA, which was scheduled to release in early May. But now, I cannot see JBoss 4.2.0 GA info in Jboss roadmap here: http://jira.jboss.com/jira/secure/BrowseProject.jspa?id=10030&subset=-1 Is there anything change? Thanks. - Tommy

19 years

1
0
0 / 0

[Installation, Configuration & Deployment] - jboss library loading sequence

by jbossfann

Hi guys, I am new to JBoss 4.0.2, and I am trying to find some info on how JBoss loads library jars. Let's say I have 2 web applications in 2 WAR files that both need to use struts.jar library. It seems if I put it into .../server/default/lib directory it does not work and it only works when I put it inside .WAR archives in WEB-INF/lib directory. So, how does JBoss handle Class loading and in what sequence from WEB-INF/lib, .../server/default/lib and other applciation lib directories? Is there any way to see through web-console what libs are currently loaded Thanks a lot View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043814#4043814 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043814

19 years

1
0
0 / 0

[JBoss Portal] - Threads and JBOSS

by memurphyiii

I'm new to JBOSS and I've been trying to write a portlet. The application that I'm working with runs in a thread and it basically loops every 5 seconds and does something. Now, I'm not really having a problem with the code. I built the WAR file, deployed and I'm able to access a URL and sending things like http://localhost:8080/myapp?action=start and http://localhost:8080/myapp?action=stop and everything is fine. However, when I issue the start action, the app runs and hits the loop that starts up in the thread's run method and then it does not return back to the browser. I'm not sure this is a JBOSS issue (nor am I completely I'm making any sense at all) but basically I am wondering when I issue a directive to JBOSS to startup my loop, how do I return an appropriate response that will show up in the browser as some witty statement about the process having started? I should note that when I issue the "stop" URL as above there's no problem. I get back a snazzy message saying the process has stopped so I'm guessing the loop is the issue. Do I need to detach the thread or something like that? Anyway, help is appreciated. Regards, Ed View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4043811#4043811 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4043811

19 years

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user May 2007