November 2008 - jboss-user - Jboss List Archives

[Beginners Corner] - jboss with website root which sits deep in the app

by down7ime

Hey Guys, Have an odd problem with my coldfusion web app which im trying to run under apache and jboss. So far i have apache successfully redirecting requests, jboss and coldfusion seem to working fine together, my problem is that the web application root is not actually in the deployment directory but a few folders below that, for eg. / - deployment directory /project/site/root - my app root now the structure is like this due to the framework that im using, is there a way to setup jboss so that the application root is a few directories below the deployment directory? Any help appreciated, thanks. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192666#4192666 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192666

17 years, 5 months

1
0
0 / 0

[Performance Tuning] - Re: JBoss 4.3 start up time information

by daniel.celentano

We have same problem with a Sun T2000. We're lost with it. If you found a solution let me know. tks. Daniel View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192665#4192665 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192665

17 years, 5 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: connect over internet to jms queue

by noelo

you could try and put two network cards in the box (or ip alias) and get Jboss to listen on all interfaces via the -b 0.0.0.0 option View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192664#4192664 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192664

17 years, 5 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: connect over internet to jms queue

by jlashmet

So I found the answer here: http://www.jboss.org/community/docs/DOC-12519 I guess at some points, JBoss returns different addresses to the client which it then uses to make different connections. My setup was returning my internal 192.168.1.2 address, so these were not working. The solution was to change some configuration to return my WAN IP instead of my internal one. However, now I can't connect from any computer on my network. Anyone know how to configure JBoss so it is accessible both behind and outside a firewall? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192661#4192661 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192661

17 years, 5 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: Jboss with multiple networks

by PeterJ

I have not noticed any performance hit by binding to 0.0.0.0 instead of a specific IP address. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192659#4192659 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192659

17 years, 5 months

1
0
0 / 0

[Persistence, JBoss/CMP, Hibernate, Database] - Re: Perplexing error - meta-aware object error

by mohitanchlia

No one has replied. I still these errors and everything on DB, active sessions, sockets, connection look fine. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192658#4192658 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192658

17 years, 5 months

1
0
0 / 0

[EJB 3.0] - Re: Share entity bean between stateless session beans

by Plukh

How timely! I was just wondering about this same issue. By using local interface in my beans instead of remote, I no longer need to remember to manually merge the changes back. Thanks Rhodan76! View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192656#4192656 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192656

17 years, 5 months

1
0
0 / 0

[Tomcat, HTTPD, Servlets & JSP] - Re: PHP on TOMCAT

by bmurphy77＠mindspring.com

Thanks Again jfrederic, i had been trying to pipe the output to a file, thats a very useful suggestion. I've pasted what looks relevant to my eye for convenience from the output. According to John Q Logfile, theres no php5servlet directory in the build and no source file, php5servlet.c, so the compiler has no input. . . . [exec] Installing PDO headers: /home/tomcat/Linux_i686_tools/PHP/include/php/ext/pdo/ [exec] ./buildphp.sh: line 892: cd: php5servlet: No such file or directory [exec] gcc: php5servlet.c: No such file or directory [exec] gcc: no input files [exec] ld: php5servlet.o: No such file: No such file or directory [exec] libphp5servlet.so wasn't build, aborting... [exec] ./buildphp.sh: line 913: php5servlet/Make.sh: No such file or directory [exec] Result: 1 . . . Should this have been created in the PHP make ? Im using the buildphp.sh from the jboss web site, theres no version number on it, its installing php version 5.2.3, if thats useful at all. the PHP configure command looks like this ( id post the full file but dont think the forum supports it ) (cd php-${PHPVER} ./configure --prefix=$TOOLS/PHP \ --cache-file=$CACHE \ --with-tsrm-pthreads --enable-shared \ --enable-embed=shared \ --enable-maintainer-zts \ \ --with-kerberos \ --with-imap-ssl \ --with-zlib-dir \ --with-ttf \ --with-bz2 \ --enable-bcmath \ --enable-calendar \ --enable-dbase \ --enable-dba \ --enable-exif \ --enable-filepro \ --enable-ftp \ --with-gettext \ --enable-mbstring \ --enable-shmop \ --enable-soap \ --enable-sockets \ --enable-sysvmsg \ --enable-sysvsem \ --enable-sysvshm \ --enable-wddx \ --with-xmlrpc \ \ --without-pear \ --with-ncurses=no \ --with-fbsql=no \ --with-fdftk=no \ --with-gmp=no \ --with-hwapi=no \ --with-informix=no \ --with-interbase=no \ --with-ming=no \ --with-mssql=no \ --with-oci8=no \ --with-pdo-oci=no \ --with-pdo-dblib=no \ --with-pdo-firebird=no \ --with-pdo-odbc=no \ --with-libedit=no \ --disable-reflection \ --with-snmp=no \ --disable-spl \ --with-sybase=no \ --with-sybase-ct=no \ --with-recode=no \ --with-mcrypt=no \ --with-mhash=no \ \ --with-msql=no \ \ ${ADDCONF} View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192653#4192653 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192653

17 years, 5 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: Jboss with multiple networks

by noelo

Thanks for your help Peter, Would having the server listening on different addresses be a performance hit i.e. twice the ports to service ? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192652#4192652 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192652

17 years, 5 months

1
0
0 / 0

[Beginners Corner] - Re: jboss not starting, Slackware unRAID

by PeterJ

Looks like you are using 4.2.3 with JDK 6. There are two binary downloads for 4.2.3, one for JDK 5 the other for JDK 6. Did you download the correct one? Oh wait, you downloaded neither but got it from another site - is that what you meant by your slackware comment?. If so, most likely they are packaging only the JDK 5 version. Therefore, try using JDK 5. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4192651#4192651 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4192651

17 years, 5 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user November 2008