April 2008 - jboss-user - Jboss List Archives

[JBoss Messaging] - Re: Clustered server preference

by ataylor

take a look at the DistributedQueueExample. The load balancing is done by the clustered connection factory, on createConnection(..) it will return a connection to one of the nodes in the cluster in a round robin fashion. From then on all messages are routed through this node. You dont need to use ha jndi if you're using a clustered connection factory. If your JMS client is running inside the App Server then you should always route to the local queue to save on round trips. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144505#4144505 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144505

18 years, 3 months

1
0
0 / 0

[JBossWS] - Re: Problem consuming .net webservice with jbossws-3.0.1-nat

by richard.opalka＠jboss.com

Could you post exchanged messages? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144501#4144501 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144501

18 years, 3 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: unable to run jboss 4.2.2.GA on windows vista

by jaikiran

Port 80? Or was it some other port? There might be some other application which might be using the port. You might have to kill that application and start JBoss. See this for more details http://wiki.jboss.org/wiki/DebugBindException View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144498#4144498 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144498

18 years, 3 months

1
0
0 / 0

[JBoss Messaging] - Re: Clustered server preference

by chip_schoch

By the way. >From the JBoss Messaging Documentation 3.1 anonymous wrote : A JMS client uses HA JNDI to lookup the connection factory. When creating connections using that connection factory a client side load balancing policy will automatically chose a node to connect to. >From the Clustering Guide 1.2.2 anonymous wrote : The JNDI client needs to be aware of the HA-JNDI cluster. You can pass a list of JNDI servers (i.e., the nodes in the HA-JNDI cluster) to the java.naming.provider.url JNDI setting in the jndi.properties file. Each server node is identified by its IP address and the JNDI port number. The server nodes are separated by commas (see Section 1.2.3, JBoss configuration on how to configure the servers and ports). | java.naming.provider.url=server1:1100,server2:1100,server3:1100,server4:1100 My use of the JMSProviderLoader in my client // Get local InitialContext and look up the ProviderLoader | InitialContext ic = ConnectionManager.getInitialContext (); | JNDIProviderAdapter adapter = (JNDIProviderAdapter) ic.lookup ("ConversionJMSProvider"); | | // Get the properties that we need for our target context and | // then create the target InitialContext | ic= new InitialContext (adapter.getProperties ()); | | // Use the queue factory ref name from the JMSProviderLoader for the lookup | ConnectionFactory factory = (ConnectionFactory) ic.lookup (adapter.getQueueFactoryRef ()); | Doing it this way essentially dereferences which connection factory I use based on the environment my service is running in. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144497#4144497 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144497

18 years, 3 months

1
0
0 / 0

[JBoss Tools (users)] - Re: Seam Generate Entities crashes

by redbird

Thanks Max. No, I have not tried the other one. I ran into too many problems trying to get it configured. Perhaps there aren't really that many bugs, but I seem to hit all of them. And I have run out of time now. I really don't have time to be trying this and that hoping it will work. I did that for 2 weeks. I was really hoping for it to work right out of the box. This may not be your issue entirely, but unfortunately it is my reality. As I said, I'll check back in about 6 months (maybe sooner if I have time). But right now, I need to get things done and I really can't mess with these tools anymore. Thanks for your help. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144496#4144496 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144496

18 years, 3 months

1
0
0 / 0

[JCA/JBoss] - Re: Performance Cost of valid-connection-checker-class-name

by vickyk

"spoulin" wrote : Does anyone ever benchmarked the overhead of this feature? No we don't have but it would be interesting to see this with millions of hits . And don't have it if your DBA guarantees that DB will not be down ever . View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144494#4144494 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144494

18 years, 3 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - unable to run jboss 4.2.2.GA on windows vista

by rsvedula

I tried to install 4.2.2.GA version on windows vista and the installation went smoothly, but when i start it throws a message port 80 in use. Can anyone please help me on solving this problem. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144492#4144492 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144492

18 years, 3 months

1
0
0 / 0

[Security & JAAS/JBoss] - Re: Calling LoginContext.login successful but SSO cookie no

by chrlon

Waking an old thread... I've got exactly the same problem, no sso cookie when creating my own login contex (as bmcgovern does) but works when using built in form authentication. I'm probably missing something but can't figure out what it is. A solution would be most welcome :) Bmcgovern...did you find a solution? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144490#4144490 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144490

18 years, 3 months

1
0
0 / 0

[Remoting] - Re: How to add ConnectionListener in JBoss ?

by Rhodan

Ok, i managed it now to add the listener via a self created jboss-service, which adds the listener through the JMX RMIAdaptor (see Jboss 4.0 guide, page 69) to the configured Remoting-MBean(s) on server startup. But i'm asking myself, if this is the normal way, to add a connection listener in jboss ? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144489#4144489 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144489

18 years, 3 months

1
0
0 / 0

[JCA/JBoss] - Performance Cost of valid-connection-checker-class-name / ch

by spoulin

I'm using JBoss 4.0.0 with Oracle 10g. I'm getting challenged by my DBA for suggesting the use of either valid-connection-checker-class-name or check-valid-connection-sql. With millions of connections daily they fear an impact on general perfomances. Does anyone ever benchmarked the overhead of this feature? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4144487#4144487 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4144487

18 years, 3 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user April 2008