June 2008 - jboss-user - Jboss List Archives

[EJB 3.0] - Re: EntityManager's Native Query & Paging Results

by jaikiran

"jaikiran" wrote : The indexing starts with 1 and not 0. So when setFirstResult(0) is used, it probably gets ignored. I'm sorry. i re-read the javadocs and it appears the indexing does start from 0. "rabbiaqaswar" wrote : | So does that mean that the query is supposed to return Object[] containg the result & the index, even if i am only retreiving a single value in the query? | | *As far as i know*, that's not how its expected to behave. The query output should be the same number of columns that you have mentioned in the select clause. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159285#4159285 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159285

17 years, 10 months

1
0
0 / 0

[JBoss Portal] - Re: Two WSRP question

by chris.laprun＠jboss.com

For the URLs, the URLs that are being rewritten should be under the control of the producer... I'll see what is feasible but I would recommend avoiding manipulating URLs directly like that. Moreover, it is likely that the state that is passed around with the parameters should actually be in the navigational state. We currently do not support forms using the GET methods in WSRP. I do not know any solution to publish a normal web app as a WSRP producer. I am not sure that it's possible to have a generic solution to that problem. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159284#4159284 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159284

17 years, 10 months

1
0
0 / 0

[EJB 3.0] - Re: EntityManager's Native Query & Paging Results

by rabbiaqaswar

So does that mean that the query is supposed to return Object[] containg the result & the index, even if i am only retreiving a single value in the query? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159283#4159283 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159283

17 years, 10 months

1
0
0 / 0

[EJB 3.0] - Re: EntityManager's Native Query & Paging Results

by jaikiran

The indexing starts with 1 and not 0. So when setFirstResult(0) is used, it probably gets ignored. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159282#4159282 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159282

17 years, 10 months

1
0
0 / 0

[Management, JMX/JBoss] - Re: How to programmaticly schedule many tasks ?

by dmary

nobody ? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159279#4159279 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159279

17 years, 10 months

1
0
0 / 0

[EJB 3.0] - Re: EJB Annotation Not Injecting (@EJB)

by repkin

Thanks, I am waiting JBoss 5 final release. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159278#4159278 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159278

17 years, 10 months

1
0
0 / 0

[JBoss jBPM] - How to modify pageflow at run time ...

by slim＠jbpm

Hil all, I'm trying to modify process graph at run time. hypothesis: myprocess is designed via eclipse jbpm sdk then uploaded via jbpm console ... from a dedicated action handler (my own configuration code), I've modified the process graph by mooving some leaving transitions ... the resulting graph seems ok. I successfully signal new transitions ! question: How can pageflow be updated, at run time, according to graph modifications ? i.e. is transitionButton in jbpm:datacell can be set using run time values? Thanks and regards. Slim, Paris. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159277#4159277 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159277

17 years, 10 months

1
0
0 / 0

[JBoss jBPM] - Re: Could not send mail

by sreepathia＠gmail.com

Caused by: javax.mail.SendFailedException: Sending failed; | nested exception is: | class javax.mail.MessagingException: Exception reading response; | nested exception is: | java.net.SocketException: Connection reset | at javax.mail.Transport.send0(Transport.java:218) It looks like your server is not running or the IP mentioned in the config file could not be resolved. Try validating your settings again. Thanks View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159276#4159276 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159276

17 years, 10 months

1
0
0 / 0

[JBoss Portal] - Re: Two WSRP question

by fbrubbo

Hi.. First of all, thanks for your response About the url.. I have the wsrp_rewrite? .. /wsrp_rewrite in that url. I just want to append some parameter in it. In our app, we have many URLs that are built by JS. How can I append extra parameters in it? Also, I could not make work a submition of a form using method GET (Only using POST works for me). We use use an in house solution for remote portlets. Actually, we have a portlet adapter that opens a http connection with the back end. In the back end we have many different frameworks being used, but most of them are using struts. Actually, we do not need a portal to do that, we could use a framework to publish our apps as WSRP producer. The thing is, I only know a solution from IBM to do that. Moreover, this solution is for the WAS 6.1 and we have WAS 5.1-6.0, Tomcat and .Net as producers. Do you have/know some solution/framework to publish a normal web app as WSRP producer? Thanks in advance Fernando View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159275#4159275 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159275

17 years, 10 months

1
0
0 / 0

[EJB 3.0] - Re: EntityManager's Native Query & Paging Results

by rabbiaqaswar

Infact it gives ids only when the setFirstResult is set at 0 i.e. setFirstResult(0). When the value of setFirstResult is anything other than 0, the query returns Object[]'s. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4159273#4159273 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4159273

17 years, 10 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user June 2008