June 2008 - jboss-user - Jboss List Archives

[JBoss Messaging] - Re: howto upgrade to jboss messaging JBossMessaging_1_4_1_CR

by armgong

ok so we build 1.4.0sp3_cp02, could we use jboss remoting 2.2.2sp7-brew? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156243#4156243 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156243

18 years, 1 month

1
0
0 / 0

[JBoss jBPM] - Re: Does JBPM Supports fully actor based taskList

by csplrj

I tried ((TaskInstance)taskMgmtSession.findTaskInstances("b").get(0)).getToken().end(); instead of ((TaskInstance)taskMgmtSession.findTaskInstances("b").get(0)).getToken().signal(); but then the result comes as a1 0 b1 1 What I require is that the task should be proceeded and as the second task is assigned to Actor "a" then the result should come something like this a1 1 b1 0 Thanks in advance CSJakharia View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156241#4156241 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156241

18 years, 1 month

1
0
0 / 0

[JBoss jBPM] - Problem with task form generation with defined variables

by Szpak

Hi, In a process definition I have: | <task-node name="Set Project Name"> | <task name="Set Project Name" swimlane="ProjectDirector"> | <controller> | <variable access="read,write,required" name="projectName" mapped-name="Project Name"></variable> | </controller> | </task> | <transition to="Set something else"></transition> | </task-node> but when I try to generate a form for that task (Details->Generate Form) I see no fields in a "Define the form fields". I wonder if they shouldn't be copied from the variables defined in that task? I have to set it manually in the "Generate Task Form" diagram. But even then after another call of "Generate Form" form fields list in empty again. I saw a bug: http://jira.jboss.org/jira/browse/GPD-194 but I can generate a form when I add (every time) form fields manually. Could you tell me what I do wrong? I'm using JBoss jBPM JPDL Designer Plugin 3.1.2.GA in Eclipse 3.3.1.1. Regards Marcin View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156240#4156240 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156240

18 years, 1 month

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Why JEMs installer for JBOSS 4.0.4 and EJB 3.0

by hariharanpm

Can any one explain 1. Why does jboss downloads say to install JBOSS via JEMs Installer to make EJB 3.0 to work on JBOSS4.0.4 ? Extract from downloads page --------- Important Note: If you want EJB3 or Seam support with JBoss AS 4.0.3 SP1, 4.0.4 or 4.0.5, you MUST download and use the relevant version of JEMS Installer together with JDK5.0. JBoss AS 4.2.x versions include support for EJB3, by default. --------- 2. Is there any difference if EJB installed manually and JEMs installer? Thanks Hari View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156237#4156237 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156237

18 years, 1 month

1
0
0 / 0

[Persistence, JBoss/CMP, Hibernate, Database] - Two-way association problem

by li.ni＠helmet.fr

Hi, I have met a problem using EntityHome with Seam, I have found a solution by modifying a setter but I want to be sure it is the proper way to do it. In order to implement a function âPost a topic in a forumâ, I have created 2 EntityBeans : Subject and Message. There is a oneToMany (two-way association) relation between Subjet and Message. public class Subject implements Serializable { ... private List associatedMessages = new LinkedList(); @OneToMany(cascade = CascadeType.ALL, fetch = FetchType.LAZY, mappedBy = "ownerSubject") @OrderBy(value = "messageId ASC") public List getAssociatedMessages() { return associatedMessages; } public void setAssociatedMessages(List associatedMessages) { this.associatedMessages = associatedMessages; } ... } public class Message implements Serializable { ... private Subject ownerSubject; @ManyToOne(fetch = FetchType.LAZY, cascade = CascadeType.ALL) @JoinColumn(name = "OWNER_SUBJECT_ID") public Subject getOwnerSubject() { return ownerSubject; } public void setOwnerSubject(Subject ownerSubject) { this.ownerSubject = ownerSubject; } } When a Subject instance is created, at the same time a 1st Message instance is created too and added to the List the subject, as shown in createSubject2() of the SessionBean SubjectHome @Name("subjectHome") public class SubjectHome extends EntityHome { ... @In(required=false) MessageHome messageHome; public void createSubject2() { this.messageHome.getInstance().setOwnerSubject(this.getInstance()); this.messageHome.persist(); this.logger.info("NUMBER OF ASSOCIATED MESSAGES : " + this.instance.getAssociatedMessages().size()); } ... } I've checked: 2 instances were successfully persisted, so in the datebase, 2 new rows were inserted in Subject table and Message table with no problem. However in the console : INFO [SubjectHome] NUMBER OF ASSOCIATED MESSAGES : 0 And when I navigate to the webpage which is used to show something of corresponding message of a Subject i met such error: CODE: #{subject.associatedMessages.get(0).submitTime} ERROR: /subjectList.xhtml: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 So I add a line in the Setter in my Message EntityBean : public void setOwnerSubject(Subject ownerSubject) { this.ownerSubject = ownerSubject; this.ownerSubject.getAssociatedMessages().add(this); } This solves our problem, the new message is well in the subject List attribute without having to open a new session. I just want to verify if it's ok to add additional line in Setter of EntityBean, just like what I did ? Thank you! Regards Li View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156236#4156236 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156236

18 years, 1 month

1
0
0 / 0

[Beginners Corner] - Jboss on tmp directory

by juanjboss

Hi all, when I locate an application in deploy directory, and this application run, the aplication work on a temporal directory locate in jboss/server/default/deploy/tmp/random_number_applicacion-name/ . I need to locate a file, fixed in one variable, who is inside this deploy structure but I don't obtain the absolute path because the directory change whenever is rebooted jboos. Someone know how to reference the temporal directory in which is deploy my aplication or know to do that jboos deploy this aplication but fixing a directory that was not random? Regards View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156234#4156234 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156234

18 years, 1 month

1
0
0 / 0

[JBoss jBPM] - Re: How to indentify a StartState node?

by pojomonkey

After a further look, I found that ProcessDefinition has the getStartState() method, and comparing each node against that I can identify the StartState node. But I still think it's untidy that the Start State node is NOT instanceof StartState... View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156233#4156233 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156233

18 years, 1 month

1
0
0 / 0

[EJB 3.0] - Re: remove method functionality in CMP Bean

by mallikarjun_nbsg

Hi, My scenario is to delete a record from the table. I am using client and calling session facade, from session facade calling CMP Home Interface remove method by passing "primary key" value. Bean ejbRemove method is also having the same "primary key" parameter. In the method body, do I need to call set method of that primary key? do I need to write any query for this method in the ejb-jar.xml Please help me out. Thank you, Mallikarjun. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156230#4156230 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156230

18 years, 1 month

1
0
0 / 0

[JBoss jBPM] - Re: How to indentify a StartState node?

by pojomonkey

"kukeltje" wrote : look at the api... afaik, there is an 'isStartState()' or something I wish - looked for that first! The only isXxxx() methods the node has are: isAsync() | isAsyncExclusive() | isSuperStateNode() View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156228#4156228 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156228

18 years, 1 month

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: Cannot access Jboss AS 4.2.2 GA on port 80 from another

by FrankTheTank

Under Linux you cannot use port 80 as a user. That is why the default port is 8080. Either run the server at root level or change the port to or add a second connector with 8080. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4156226#4156226 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4156226

18 years, 1 month

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user June 2008