January 2009 - jboss-user - Jboss List Archives

[Clustering/JBoss] - Re: discarded message from non-member

by bstansberry＠jboss.com

First, if you are a support customer (you're using EAP), please open a case via the Customer Support Portal. There's no SLA via the forums. Otherwise, 1) Are you actually using UDP multicast? The ports shown in your logs seem more like what would be used by a TCP-based JGroups config. (Could be multicast though; depends on your config). 2) I need to understand what channels are using 192.168.11.102:1147 and 192.168.11.103:2600. Please find the logging that looks like this on the two nodes and post the area around it: ------------------------------------------------------- GMS: address is 192.168.11.102:1147 ------------------------------------------------------- or ------------------------------------------------------- GMS: address is 192.168.11.103:2600 ------------------------------------------------------- 3) The following will likely cause problems, although AFAIR not the NAKACK issue you are reporting: 15:50:45,995 INFO [DefaultPartition] All Members : 2 ([127.0.0.1:1099, 127.0.0.1:1099]) That tells me you have JBoss bound to 127.0.0.1 on both nodes. That would occur either by starting JBoss with -b 127.0.0.1 on both nodes, or by not setting -b and leaving the 127.0.0.1 default. The AS clustering code uses the bind address and JNDI port to form a unique cluster-wide id for each node. Works fine, except when you bind JBoss to 127.0.0.1 or 0.0.0.0 on more than one machine. If you *want* to use 127.0.0.1 or 0.0.0.0 as the -b value on more than one node, you should edit the server/all/deploy/cluster-service.xml's ClusterPartition mbean and either change ${jboss.bind.address} to something unique per server, like 192.168.11.102 or, explicitly configure a String "NodeName" attribute with a unique value per node: node1 Bottom line, you don't want duplicates in the "[DefaultPartition] All Members" logging. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202979#4202979 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202979

17 years, 5 months

1
0
0 / 0

[JCA/JBoss] - Re: Issues connecting to Tibco EMS

by adrian＠jboss.org

If you specifed them correctly you can't get the same thing. It would show the user id in the DEBUG message and also in the error message where it shows the ActivationSpec properties. Of course, it would still fail if they were invalid like the TIBCO error message says. Does it work if you don't configure the DLQ? i.e. useDLQ=false View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202977#4202977 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202977

17 years, 5 months

1
0
0 / 0

[JBoss jBPM] - JBMP 3.3.1

by pip33

hi I install jbpm-3.3.1.GA-installer on wondows xp i run the script run.bat for start the service open mozille in my localhost, but i dont know where is jbpm-console where is? existe any guide to install jbpm-3.3.1.GA-installer thanks View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202976#4202976 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202976

17 years, 5 months

1
0
0 / 0

[JBoss Tools (users)] - Re: Seam EAR deployment problem

by max.andersen＠jboss.com

Not sure if there is any other way to learn how a piece of software really works ;) View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202975#4202975 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202975

17 years, 5 months

1
0
0 / 0

[JBoss jBPM] - Problems with jbpm 3.3.1 GA and JBoss AS 5.0.0 GA

by the_fredo

Hi ! Maybe I missed something, but I have some basic problems with jbpm 3.3.1 GA/JBoss AS 5.0.0 GA (Java 6) 1) http://localhost:8080/jbpm-console/app/processes.jsf produces an empty page with a stack trace already posted in that group : http://www.jboss.com/index.html?module=bb&op=viewtopic&t=146972 I read in https://jira.jboss.org/jira/browse/JBPM-1913 that this issue should be fixed in 3.3.1 but it's not what I observe. Upgrading the jsf-facelets jar improves the situation a little bit, but it crashed when you click on 'examine'. 2) the server upload path in the deployment tab of GPD does not work anymore (i.e. /jbpm-console/upload). I tried /jbpm-console/app/upload. It seems to work for the connection testing but I got the same stack trace as for 1) Moreover, the deployment of the PD does not work with /jbpm-console/app/upload : I got an HTTP 403 in the Eclipse's Server Log, even with the new jsf-facelet.jar java.io.IOException: Server returned HTTP response code: 403 for URL: http://localhost:8080/jbpm-console/app/upload | at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1170) | at org.jbpm.gd.jpdl.util.ProcessDeployer.deployProcessWithServlet(Unknown Source) | at org.jbpm.gd.jpdl.util.ProcessDeployer.access$3(Unknown Source) | at org.jbpm.gd.jpdl.util.ProcessDeployer$1.run(Unknown Source) | ... 3) the new GWT console requires a login/password. Does someone know them ? If yes, could you tell me where it is documented (I spent hours browsing jboss docs and googling but I did not find anything) Thanks in advance ! Fred View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202972#4202972 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202972

17 years, 5 months

1
0
0 / 0

[JCA/JBoss] - Re: Connection pool leak in JBoss 3.2.5 ???

by adrian＠jboss.org

Come on, I wasn't prepared to answer this question 3 years ago when 3.2.5 was only 2 years old. Why ask about potential bugs in very old versions that are probably already fixed in the latest version? Try the latest version (or at least a more recent version that is not 5 years old). If you've still got a problem then it might be interesting. And you can search the release notes just as well as I can to find the fix so don't waste time asking people to act as human search engines. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202971#4202971 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202971

17 years, 5 months

1
0
0 / 0

[JBossMQ] - Re: Queue Receiver hangs

by Mikle123

Adrian, thanks for the answer and you are absolutly right i should have done some more research one the topic before posting. Unfortunaly its seems not to be basic stuff like forgeting to set the Exception Listeners and handle the exeptions. However as i'm quite shure you have heared that many times i will double and tripple check for this. By checking the forum i also found 2 topics which im cheking right now: -http://www.jboss.com/index.html?module=bb&op=viewtopic&t=144840 -http://www.jboss.com/index.html?module=bb&op=viewtopic&t=58769 We are using Jboss 4.05 so I'm not shure if it will aply. Will it ? Regards, Mikl View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202970#4202970 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202970

17 years, 5 months

1
0
0 / 0

[Clustering/JBoss] - Re: JBoss Clustering hang because of log4j

by bstansberry＠jboss.com

anonymous wrote : 2009-01-16 02:40:10,680 ERROR [STDERR] java.io.IOException: ÃÂÃÂ¼ÃÂÃÂÃÂÃÂ»ÃÂÃÂ³ÃÂÃÂµÃÂÃÂ NFS ÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂ ÃÂÃÂÃÂÃÂÃÂÃÂµÃÂÃÂ© | Can you tell me what all those special characters say? Looks like it's a failure to close the server.log file for one day so it can roll over to the next day's version. But the other exceptions seem unrelated other than that they are IO related and occur around the same time. Do those non-log4j exceptions only occur at this time? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202969#4202969 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202969

17 years, 5 months

1
0
0 / 0

[JBossMQ] - Re: Queue Receiver hangs

by ntsankov

What if I have 5 MDBs behind those queues and I get the same situation? Is this also covered in the FAQ? (I read it, but couldn't find a clue...) View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202968#4202968 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202968

17 years, 5 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: Support for Windows 2008 (64-bit)

by PeterJ

No special requirements. You can use either a 32-bit or 64-bit JDK, though since you are using 64-bit Windows 2008, you might want to use a 64-bit JDK (NOT the Itanium one!) If you are going with JBoss 4.2.3, note that there is JDK5-related binary download and a JDK6-related binary download - make sure you get the one that matches your JDK, As a complete example, from Sun's web site download and install JDK6u11, platform Windows x64 (hint: do not install into Program Files - avoid spaces in the path). Set JAVA_HOME. Download and unzip jboss-4.2.3.GA-jdk6.zip (once again, not in Program Files). That's it! View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4202967#4202967 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4202967

17 years, 5 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user January 2009