June 2009 - jboss-user - Jboss List Archives

[Clustering/JBoss] - Re: ConcurrentModificationException during session serializa

by bstansberry＠jboss.com

Good. :-) I very deliberately eliminated the double buffering because of the memory cost. FYI, before this thread got going I'd been thinking (vaguely) in terms of using read/write locks in AS 6 to better handle coordination. E.g., in ClusteredSessionValve acquire a RL before passing the request down the pipeline, release when it returns, acquire a WL before handling replication. Basically, allow concurrent access to a session but lock out requests while a thread is replicating. The same thing could be done by having ClusteredSessionValve synchronize on the facade while passing the request down the pipeline, but then only one request can proceed at a time. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240377#4240377 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240377

16 years, 10 months

1
0
0 / 0

[EJB/JBoss] - EJB remote invocation with JDK 1.3 client

by tk＠ap

Hello! Suggest the following environment: | * JBoss 5 application server | * client with JDK 1.3 only Is it possible for the client to remote lookup an EJB and invoke its methods? Thank you very much for any suggestions, - Thomas View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240371#4240371 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240371

16 years, 10 months

1
0
0 / 0

[JBoss Messaging] - Re: Can't control queues from jconsole

by jmesnil

err... sorry, I confused JON and AS 5 JMX console. there is an issue in the current configuration of JBoss Messaging which prevents to manage it directly in AS 5 console. To fix it: 1/ change the MBeanServer code in deploy/messaging.sar/jbm-jboss-beans.xml to: | <bean name="MBeanServer" class="javax.management.MBeanServer"> | <constructor factoryClass="org.jboss.mx.util.MBeanServerLocator" | factoryMethod="locateJBoss"/> | </bean> | 2/ edit conf/props/messaging-users.properties and add the line: | JBM.MANAGEMENT.ADMIN.USER=CHANGE ME!! | 3/ that's it, JBoss Messaging is manageable using the JMX console: http://localhost:8080/jmx-console/ in the domain tab using "org.jboss.messaging" We'll fix this configuration issue in our next release. Sorry for the inconvenience View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240363#4240363 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240363

16 years, 10 months

1
0
0 / 0

[JBoss Portal] - Re: Portal database

by prabhat.jha＠jboss.com

You have to be more clear on what you mean by portal server. In JBoss Portal case, it's portal bits running on top of JBoss Application server. JBoss Portal bits are deployed on the same machine running JBoss Application server. Currently, JBoss Portal only works with JBoss AS. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240358#4240358 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240358

16 years, 10 months

1
0
0 / 0

[Tomcat, HTTPD, Servlets & JSP] - Re: Problem with NDC

by adalse0

Yes Frederic that is what i'm talking about. By the way: I couldn't find an edit Button for my first post, so i'm not able to change the Topic. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240356#4240356 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240356

16 years, 10 months

1
0
0 / 0

[JBoss jBPM] - Re: WARN [ProxyWarnLog] Narrowing proxy to class org.jbpm.g

by vignesh57

Even without using a super state, i am getting this WARNING time & again. As my process execution is fine, i just ignored it. But why is it coming ? Experienced people, please address us.. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240353#4240353 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240353

16 years, 10 months

1
0
0 / 0

[JBoss Messaging] - Re: Can't control queues from jconsole

by jmesnil

JBoss Messaging is not currently manageable through the AS 5 console but it is planned: https://jira.jboss.org/jira/browse/JBMESSAGING-1636 View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240352#4240352 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240352

16 years, 10 months

1
0
0 / 0

[EJB 3.0] - Re: Limit IP access to a session beans (EAR)

by xmedeko

Well, the client address is accessible from thread name :-). So, I can write the Around Invoke Interceptor Method to check this IP. I was just asking if there is some nice JBoss solution for this. You know, some config with IP addresses like 10.1.1.128/20 :-) BTW. about accessing IP from session beans: I think BEA or Oracle AS put client IP somewhere into the session context. Or I was thinking that some ThreadLocal variable could do the trick. But it is solution for the JEE session beans, that would not work for the JBoss service bean, I guess. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240350#4240350 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240350

16 years, 10 months

1
0
0 / 0

[JBoss jBPM] - Help needed in deploying 'par' to JBoss server

by vignesh57

Hi folks, i am new to jBPM. I use to deploy projects using the deployment tab in eclicpse IDE. I now want to deploy it using java code. I tried the following piece of code. No exceptions & errors. But the file is not deployed. Please help me in completing this. | JbpmContext ctx = JbpmConfiguration.getInstance().createJbpmContext(); | try { | FileInputStream fis = new FileInputStream("c:\\test.par"); | | ZipInputStream is = new ZipInputStream(fis); | | ProcessDefinition pd = ProcessDefinition.parseParZipInputStream(is); | | ctx.deployProcessDefinition(pd); | | ctx.getGraphSession().saveProcessDefinition(pd); | | System.out.println("Deployment Successfull"); | } | catch(Exception e) | { | System.out.println(e.toString()); | } | finally { | ctx.close(); | } | View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240348#4240348 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240348

16 years, 10 months

1
0
0 / 0

[EJB 3.0] - Re: Limit IP access to a session beans (EAR)

by wolfc

An AOP interceptor can access the client address: https://jira.jboss.org/jira/browse/JBREM-758. It's not yet available through an EJB API yet: https://jira.jboss.org/jira/browse/EJBTHREE-902. So you can write an AOP interceptor, put it into ejb3-interceptors-aop.xml and push the client address somewhere where you can pick it up in the bean. View the original post : http://www.jboss.org/index.html?module=bb&op=viewtopic&p=4240347#4240347 Reply to the post : http://www.jboss.org/index.html?module=bb&op=posting&mode=reply&p=4240347

16 years, 10 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user June 2009