December 2011 - jboss-user - Jboss List Archives

[EJB3] - Set "maxSession" of an MDB using XML instead of Annotations

by Hushen Savani

Hushen Savani [http://community.jboss.org/people/hushen.savani] created the discussion "Set "maxSession" of an MDB using XML instead of Annotations" To view the discussion, visit: http://community.jboss.org/message/639774#639774 -------------------------------------------------------------- Hi, I having an application developed on the apis of Hornetq-2.2.5 with AppServer JBossAS-5.1.0. And with EJB3 implementaion. I am trying to set "maxSession" parameter of an MDB using xml instead of annotations. I've set the following parameters In standardjboss.xml : 1) maxSession -> 20 in *jms-message-inflow-driven-bean* <invoker-proxy-binding> 2) MaximumSize -> 20 in *message-driven-bean* <invoker-proxy-binding> In ejb3-interceptors-aop.xml 1) maxSize -> 20 in *Message Driven Bean* <domain> for Pool Annotation. But, the changes are not reflected, max session are created as *15*, which is the *default* value of the *maxSession* of an MDB. According to following JBoss Doc, http://docs.redhat.com/docs/en-US/JBoss_Enterprise_Application_Platform/5... http://docs.redhat.com/docs/en-US/JBoss_Enterprise_Application_Platform/5... it says that, in order the changes to be reflected, *you need to set the maxSession parameter either on the resource adapter itself or via an an Activation Config Property on the MDB itself.* I tried digging out the Hornetq Resource Adapter (*ra.xml*), but I find no clue where to set it. Pl. have a pointers on the same. Thanks. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/639774#639774] Start a new discussion in EJB3 at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
4
0 / 0

[JBoss Web Services] - Re: Where is jboss-ws-security_1_0.xsd

by Alessio Soldano

Alessio Soldano [http://community.jboss.org/people/asoldano] created the discussion "Re: Where is jboss-ws-security_1_0.xsd" To view the discussion, visit: http://community.jboss.org/message/639916#639916 -------------------------------------------------------------- Hi Steve, > I have three basic test cases: > 1) request has WS-Security header with a valid username/password > 2) request has WS-Security header with an invalid username/password > 3) request has no WS-Security header. > > I expect the follwing results in these cases: > 1) request is processed, non-error response > 2) request is disallowed ("Invalid User".) > 3) request is disallowed ("This service requires <wsse:Security>, which is missing"). > > However. the above test suite only passes with a file jboss-wsse-server.xml like that in the sample (note that I have commented out the schema stuff so it won't fail vaidation in Eclipse). > > > <?xml version="1.0" encoding="UTF-8"?> > > > > <jboss-ws-security> > >  > > <config> > > <requires> > > <username/> > > </requires> > > </config> > > > > </jboss-ws-security> > > With this config (as implied by your comment): > > > <?xml version="1.0" encoding="UTF-8"?> > > > > <jboss-ws-security> > >  > > <config> > >  > >  > >  > > </config> > > </jboss-ws-security> > then the first two test cases pass but the third one does not, that is, requests without the W2Security header are allowed. Thus it seems that the <username> element IS required on the server side to perform security checks correctly. This is likely a consequence on the check that's in the WSSecurityDispatcher::decodeMessage() method on the existence of requirements in the current ws-security configuration. Can you try adding an empty <requires/> element to the server configuration? That should probably be a valid solution here. This said, the problem here is not in being sure you get the message regarding no wsse setup in case 3 above, while instead being sure the invocation does not succeed due to missing authentication/authorization reasons. How is your endpoint? EJB3 or POJO? There are some additional authentication/authorization options (jaas integration) explained at http://community.jboss.org/docs/DOC-13538 http://community.jboss.org/wiki/JBossWS-WS-SecurityOptions -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/639916#639916] Start a new discussion in JBoss Web Services at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
1
0 / 0

[jBPM] - Re: birt report data not showing up in jbpm console - can't load jdbc jar ?

by Tihomir Surdilovic

Tihomir Surdilovic [http://community.jboss.org/people/tsurdilovic] created the discussion "Re: birt report data not showing up in jbpm console - can't load jdbc jar ?" To view the discussion, visit: http://community.jboss.org/message/639724#639724 -------------------------------------------------------------- With 3.7 there is nothing you need outiside of copying jars of ReportEngine/lib to your classpath (web-inf/lib). What you are running into most likely is that you are still using the 1.3 report-server code which is not compatible with Birt 3.7. We are fixing this now as part of the jbpm-installer AS7 upgrade. Will update here when its changed in (remind me too if you don't hear anything in the next couple of days). -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/639724#639724] Start a new discussion in jBPM at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
6
0 / 0

[jBPM] - Re: jbpm-5.1.0 Demo can't work fine

by cmcmillen1

cmcmillen1 [http://community.jboss.org/people/cmcmillen1] created the discussion "Re: jbpm-5.1.0 Demo can't work fine" To view the discussion, visit: http://community.jboss.org/message/632883#632883 -------------------------------------------------------------- I had the same issue and solved it by upgrading to JDK 1.6+. The user guide says JDK 1.5+ is all that is required and I happened to have 1.5.0_16 installed so I just went with that. After having the described issues (and noticing that in the demo video they are using JDK 1.6.0_14) I switched to JDK 1.6.0_16 since I had that installed already and now everything is working fine. Also, I'm not sure if this was necessary or not but just to be safe, after switching JDKs I deleted the jbpm-installer/ folder, re-extracted the installer archive, and re-ran "ant install.demo". Hope this helps. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/632883#632883] Start a new discussion in jBPM at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
1
0 / 0

[JBoss Web Services] - Where is jboss-ws-security_1_0.xsd

by Steve Cohen

Steve Cohen [http://community.jboss.org/people/stevecoh4] created the discussion "Where is jboss-ws-security_1_0.xsd" To view the discussion, visit: http://community.jboss.org/message/638742#638742 -------------------------------------------------------------- I create a jboss-wsse-server.xml with this content: > <?xml version="1.0" encoding="UTF-8"?> > > <jboss-ws-security xmlns=" http://www.jboss.com/ws-security/config http://www.jboss.com/ws-security/config" xmlns:xsi=" http://www.w3.org/2001/XMLSchema-instance http://www.w3.org/2001/XMLSchema-instance" > xsi:schemaLocation=" http://www.jboss.com/ws-security/config http://www.jboss.com/ws-security/config http://www.jboss.com/ws-security/schema/jboss-ws-security_1_0.xsd http://www.jboss.com/ws-security/schema/jboss-ws-security_1_0.xsd"> > <config> > <requires> > <username/> > </requires> > <authorize> > <unchecked/> > </authorize> > </config> > > </jboss-ws-security> In one validator (SlickEdit's) this fails with > http://www.jboss.com/ws-security\schema\jboss-ws-security_1_0.xsd http://www.jboss.com/ws-security\schema\jboss-ws-security_1_0.xsd' not found Indeed that appears to be the case. That link gets a 404 in a Web Browser. With Eclipse's validator, the error is different: > cvc-complex-type.2.4.a: Invalid content was found starting with element 'username'. One of '{" http://www.jboss.com/ws-security/config http://www.jboss.com/ws-security/config":timestamp, " http://www.jboss.com/ws-security/config http://www.jboss.com/ws-security/config":encryption, " http://www.jboss.com/ws-security/config http://www.jboss.com/ws-security/config":signature}' is expected. jboss-wsse-server.xml /my-ejb/src/main/resources/META-INF line 7 XML Problem Evidently, Eclipse is finding some version of the schema somewhere and looking at it. Where might that be? I've looked and can't find it. And what is the proper address that a jboss-wsse-server.xml should point to? Where can I go to find out what the legal schema is? This is for JBoss-AS-5.1.0.GA and the JBossWS native stack. Thanks. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/638742#638742] Start a new discussion in JBoss Web Services at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
3
0 / 0

[JBoss Web Services] - jbossws-cxf-4.0.0.CR1 is not working on jboss 6.1.0 GA

by Macin My

Macin My [http://community.jboss.org/people/mymacin] created the discussion "jbossws-cxf-4.0.0.CR1 is not working on jboss 6.1.0 GA" To view the discussion, visit: http://community.jboss.org/message/638603#638603 -------------------------------------------------------------- Hi Everyone, I have deployed jbossws-cxf-4.0.0.CR1 binaries on jboss 6.1.0 GA server but I am getting the below exception while running Jboss AS. DeploymentException: Error deploying: vfs:///E:/Downloads/xts/new/jboss-6.1.0.Final/server/default/deployers/jbossws-jaxrpc.deployer Caused by: java.lang.NoClassDefFoundError: org/jboss/wsf/common/integration/AbstractDeploymentAspect at java.lang.ClassLoader.defineClass1(Native Method) [:1.6.0_24] at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632) [:1.6.0_24] at java.lang.ClassLoader.defineClass(ClassLoader.java:616) [:1.6.0_24] at org.jboss.classloader.spi.base.BaseClassLoader.access$200(BaseClassLoader.java:52) [jboss-classloader.jar:2.2 Thanks in Advance Macin -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/638603#638603] Start a new discussion in JBoss Web Services at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
1
0 / 0

[JNDI and Naming] - An error in deployment - MBeans waiting for other MBeans

by Aurel Sandu

Aurel Sandu [http://community.jboss.org/people/aurelsandu] created the discussion "An error in deployment - MBeans waiting for other MBeans" To view the discussion, visit: http://community.jboss.org/message/639487#639487 -------------------------------------------------------------- I run JBoss 4.2.1 and I want to deploy an app , but I get this --- MBeans waiting for other MBeans --- ObjectName: jboss.web.deployment:war=ipc- client-2.16.00.war,id=-1181707877 State: NOTYETINSTALLED I Depend On: jboss.j2ee:module="ipc-server-2.16.00.jar",service=EjbModule --- MBEANS THAT ARE THE ROOT CAUSE OF THE PROBLEM --- ObjectName: jboss.j2ee:module="ipc-server-2.16.00.jar",service=EjbModule State: NOTYETINSTALLED Depends On Me: jboss.web.deployment:war=ipc-client-2.16.00.war,id=-1181707877 Can somebody tell me what is the problem? What can I adjust? Thank you, Aurel -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/639487#639487] Start a new discussion in JNDI and Naming at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
5
0 / 0

[Beginner's Corner] - Re: Console Application in JBoss

by jaikiran pai

jaikiran pai [http://community.jboss.org/people/jaikiran] created the discussion "Re: Console Application in JBoss" To view the discussion, visit: http://community.jboss.org/message/639811#639811 -------------------------------------------------------------- The first question would be - why do you want to deploy it in JBoss AS? Is it a web application? Which version of JBoss AS do you use? P.S: Please do not use all bold letters. It's considered yelling. -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/639811#639811] Start a new discussion in Beginner's Corner at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

3
2
0 / 0

[jBPM] - Retrieval of variable values for a process instance

by Zeliang Huang

Zeliang Huang [http://community.jboss.org/people/ossa] created the discussion "Retrieval of variable values for a process instance" To view the discussion, visit: http://community.jboss.org/message/639771#639771 -------------------------------------------------------------- Hi Guys, I am looking for a way to read the values of variables in my process instance after it is started. I am able to get the ProcessInstanceId through below java codes. Any idea how can I continue from here? | | | BlockingGetTaskResponseHandler getResponseHandler = new BlockingGetTaskResponseHandler(); | | | | client.getTask(taskId, getResponseHandler); | | | | getResponseHandler.waitTillDone(10000); | | | | Task ts = getResponseHandler.getTask(); | | | ts.getTaskData().getProcessInstanceId(); | | thanks -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/639771#639771] Start a new discussion in jBPM at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

3
2
0 / 0

[JBoss Web Services] - AS7 standalone-xts.xml start failed when no internet connection

by Amos Feng

Amos Feng [http://community.jboss.org/people/zhfeng] created the discussion "AS7 standalone-xts.xml start failed when no internet connection" To view the discussion, visit: http://community.jboss.org/message/638296#638296 -------------------------------------------------------------- Hi, we meet the problem with starting as7 by standalone-xts.xml without internet connection. Steps to reproduce: 1. Take latest JBossAS 7 from git hub 2. Build JBossAS 3. Disconnect from the internet 4. start the AS: sh bin/standalone.sh --server-config=standalone-xts.xml 5. observe: Failed to start service jboss.ws.endpoint-publish.ws-c11: org.jboss.msc.service.StartException in service jboss.ws.endpoint-publish.ws-c11: javax.xml.ws.WebServiceException: org.apache.ws.commons.schema.XmlSchemaException: Unable to locate imported document at 'http://www.w3.org/2006/03/addressing/ws-addr.xsd', relative to 'schema1.xsd'. more details in https://issues.jboss.org/browse/JBTM-966 https://issues.jboss.org/browse/JBTM-966 I found there is META-INF/jax-ws-catalog.xml in module/org/jboss/ws/jaxws-client/main/jbossws-cxf-client-4.0.0.CR1.jar and it looks like as7 *can not* load this file to mapping the remote sechma urls to local files. so my question is: 1. as7 can not load jax-ws-catalog.xml ? 2. this file is placed in the right directory ? 3. do I miss other configurations to use this catalog file ? Thanks a lot, Amos -------------------------------------------------------------- Reply to this message by going to Community [http://community.jboss.org/message/638296#638296] Start a new discussion in JBoss Web Services at Community [http://community.jboss.org/choose-container!input.jspa?contentType=1&cont...]

12 years, 10 months

2
1
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user December 2011