[jBPM] - Re: Incomplete deployment
by tmmaluleke
tmmaluleke [https://community.jboss.org/people/tmmaluleke] created the discussion
"Re: Incomplete deployment"
To view the discussion, visit: https://community.jboss.org/message/756415#756415
--------------------------------------------------------------
Hello wqe wqe,
I do have the image:
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/756415#756415]
Start a new discussion in jBPM at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&con...]
13 years, 7 months
- 1
- 0
[jBPM] - Incomplete deployment
by tmmaluleke
tmmaluleke [https://community.jboss.org/people/tmmaluleke] created the discussion
"Incomplete deployment"
To view the discussion, visit: https://community.jboss.org/message/756389#756389
--------------------------------------------------------------
Hello,
I'm trying to deploy the jbpm process from the Eclipse plugin to the jbpm console. I have build the package and it was successfully build but I ca see my process via process overview and I able to start it but when i click the diagram button the dialog box of incomplete deployment pos out with this message(No diagram associated with process).
What may be the problem?
| |
Cheers
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/756389#756389]
Start a new discussion in jBPM at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&con...]
13 years, 7 months
- 2
- 1
[jBPM] - Using TaskService directly vs Task Service/TaskClient architecture
by wqe wqe
wqe wqe [https://community.jboss.org/people/drupalspring] created the discussion
"Using TaskService directly vs Task Service/TaskClient architecture"
To view the discussion, visit: https://community.jboss.org/message/756393#756393
--------------------------------------------------------------
Good afternoon jBPM community from my timezone ,
TaskClient seems to call the TaskService 's methods eventually. So if I embedded the jbpm engine in my own application to handle the human tasks , is it better to invoke the TaskService directly? I think it is more simple as it does not involve starting TaskServer .
So , apart the fact that TaskServer/TaskClient approach allow us to hoist the TaskServer in a separate machine (maybe for the performance reason) , any advantages of using TaskServer/TaskClient approach rather than using TaskService directly ? Any suggestions to choose which approach under different situations ?
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/756393#756393]
Start a new discussion in jBPM at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&con...]
13 years, 7 months
- 1
- 0
[jBPM] - Re: Fatal and Critical Error that cause the server log continues to grow indefinitely until out of the harddisk space
by wqe wqe
wqe wqe [https://community.jboss.org/people/drupalspring] created the discussion
"Re: Fatal and Critical Error that cause the server log continues to grow indefinitely until out of the harddisk space"
To view the discussion, visit: https://community.jboss.org/message/756381#756381
--------------------------------------------------------------
I delete a single record from the *sessioninfo* table , then everything returns to normal . Any ideas??
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/756381#756381]
Start a new discussion in jBPM at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&con...]
13 years, 7 months
- 1
- 0
[jBPM] - How to make visual process Monitor as seen in JBossWorld Keynote Demo?
by Thomas Setiabudi
Thomas Setiabudi [https://community.jboss.org/people/thomas.setiabudi] created the discussion
"How to make visual process Monitor as seen in JBossWorld Keynote Demo?"
To view the discussion, visit: https://community.jboss.org/message/756362#756362
--------------------------------------------------------------
Hi,
I read the article about JBossWorld Keynote Demo here http://kverlaen.blogspot.com/2012/07/jbossworld-keynote-demo.html http://kverlaen.blogspot.com/2012/07/jbossworld-keynote-demo.html
and they got a nice process monitor to visualize where all the orders were waiting http://4.bp.blogspot.com/-xH1HSvNIoRk/T-31JSDxKfI/AAAAAAAAAT8/OE1X0xiv-O8... http://4.bp.blogspot.com/-xH1HSvNIoRk/T-31JSDxKfI/AAAAAAAAAT8/OE1X0xiv-O8...
How to make similar process Monitor using JBPM5.3 ?
and what version of JBPM is used in that Demo?
Any Help is appreciated.
Regards,
Thomas Setiabudi
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/756362#756362]
Start a new discussion in jBPM at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&con...]
13 years, 7 months
- 1
- 0
[jBPM] - Fatal and Critical Error that cause the server log continues to grow indefinitely until out of the harddisk space
by wqe wqe
wqe wqe [https://community.jboss.org/people/drupalspring] created the discussion
"Fatal and Critical Error that cause the server log continues to grow indefinitely until out of the harddisk space"
To view the discussion, visit: https://community.jboss.org/message/756352#756352
--------------------------------------------------------------
As we all know , many components in jbpm 5.30 final version is full of BUGs .After tremendous effort , I managed to solve all the bugs and can run the built-in evaluation process successfully in the gwt-console. Then I try to use the eclipse to develop a process which contains human tasks and the form (ftl) and the upload them to the Guvnor , compile it and use the gwt console to run this process.
https://issues.jboss.org/browse/JBPM-3690 This stupid bug causes my task forms cannot be shown properly . So I follow the stupid workaround to rename .ftl to .flt before uploading to Guvnor using eclipse. Then now , when I login in to the gwt-console and select the process. The following errors loop infinitely and will not stop .It causes the size of the size log grows continually indefinitely until the harddisk running of the space.
I don't know what happens and the exact ways to reproduce this problem . I only describe what I have done when I come across this error .
Jbpm 5.30 final is definitely are very unstable and full of bugs product IMO . The server log is attached , the following show some erros , please advise what happens.
> *14:16:00,258 INFO [stdout] (pool-11-thread-1) Unable to execute timer job!*
> *14:16:00,273 ERROR [stderr] (pool-11-thread-1) java.lang.NullPointerException*
> 14:16:00,273 ERROR [stderr] (pool-11-thread-1) at org.jbpm.process.instance.impl.ProcessInstanceImpl.setProcess(ProcessInstanceImpl.java:61)
> 14:16:00,273 ERROR [stderr] (pool-11-thread-1) at org.jbpm.marshalling.impl.AbstractProtobufProcessInstanceMarshaller.readProcessInstance(AbstractProtobufProcessInstanceMarshaller.java:375)
> 14:16:00,273 ERROR [stderr] (pool-11-thread-1) at org.jbpm.persistence.processinstance.ProcessInstanceInfo.getProcessInstance(ProcessInstanceInfo.java:142)
>
> *14:16:00,508 WARN [com.arjuna.ats.arjuna] (pool-11-thread-1) ARJUNA012125: TwoPhaseCoordinator.beforeCompletion - failed for SynchronizationImple< 0:ffffac13c765:6d233076:503c6097:5b,* org.hibernate.engine.transaction.synchronization.internal.RegisteredSynchronization@10fc60b >: javax.persistence.PersistenceException: error during managed flush
> at org.hibernate.ejb.AbstractEntityManagerImpl$CallbackExceptionMapperImpl.mapManagedFlushFailure(AbstractEntityManagerImpl.java:1505) [hibernate-entitymanager-4.1.6.Final.jar:4.1.6.Final]
> at org.hibernate.engine.transaction.synchronization.internal.SynchronizationCallbackCoordinatorImpl.beforeCompletion(SynchronizationCallbackCoordinatorImpl.java:109) [hibernate-core-4.1.6.Final.jar:4.1.6.Final]
> at org.hibernate.engine.transaction.synchronization.internal.RegisteredSynchronization.beforeCompletion(RegisteredSynchronization.java:53) [hibernate-core-4.1.6.Final.jar:4.1.6.Final]
> at com.arjuna.ats.internal.jta.resources.arjunacore.SynchronizationImple.beforeCompletion(SynchronizationImple.java:76)
> at com.arjuna.ats.arjuna.coordinator.TwoPhaseCoordinator.beforeCompletion(TwoPhaseCoordinator.java:273)
> at com.arjuna.ats.arjuna.coordinator.TwoPhaseCoordinator.end(TwoPhaseCoordinator.java:93)
> at com.arjuna.ats.arjuna.AtomicAction.commit(AtomicAction.java:164)
> at com.arjuna.ats.internal.jta.transaction.arjunacore.TransactionImple.commitAndDisassociate(TransactionImple.java:1165)
> at com.arjuna.ats.internal.jta.transaction.arjunacore.BaseTransaction.commit(BaseTransaction.java:117)
> at com.arjuna.ats.jbossatx.BaseTransactionManagerDelegate.commit(BaseTransactionManagerDelegate.java:75)
> at org.jboss.tm.usertx.client.ServerVMClientUserTransaction.commit(ServerVMClientUserTransaction.java:167)
>
> 14:16:00,664 WARN [org.drools.persistence.jta.JtaTransactionManager] (pool-11-thread-1) Unable to commit transaction: javax.transaction.RollbackException: ARJUNA016053: Could not commit transaction.
> at com.arjuna.ats.internal.jta.transaction.arjunacore.TransactionImple.commitAndDisassociate(TransactionImple.java:1177)
> at com.arjuna.ats.internal.jta.transaction.arjunacore.BaseTransaction.commit(BaseTransaction.java:117)
> at com.arjuna.ats.jbossatx.BaseTransactionManagerDelegate.commit(BaseTransactionManagerDelegate.java:75)
> at org.jboss.tm.usertx.client.ServerVMClientUserTransaction.commit(ServerVMClientUserTransaction.java:167)
> at org.drools.persistence.jta.JtaTransactionManager.commit(JtaTransactionManager.java:179) [drools-persistence-jpa-5.4.0.Final.jar:5.4.0.Final]
> at org.drools.persistence.SingleSessionCommandService.execute(SingleSessionCommandService.java:371) [drools-persistence-jpa-5.4.0.Final.jar:5.4.0.Final]
> at org.drools.persistence.jpa.JpaTimerJobInstance.call(JpaTimerJobInstance.java:34) [drools-persistence-jpa-5.4.0.Final.jar:5.4.0.Final]
> at org.drools.persistence.jpa.JpaTimerJobInstance.call(JpaTimerJobInstance.java:14) [drools-persistence-jpa-5.4.0.Final.jar:5.4.0.Final]
> at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) [rt.jar:1.7.0_06]
> at java.util.concurrent.FutureTask.run(FutureTask.java:166) [rt.jar:1.7.0_06]
>
> Caused by: javax.persistence.PersistenceException: error during managed flush
> at org.hibernate.ejb.AbstractEntityManagerImpl$CallbackExceptionMapperImpl.mapManagedFlushFailure(AbstractEntityManagerImpl.java:1505) [hibernate-entitymanager-4.1.6.Final.jar:4.1.6.Final]
> at org.hibernate.engine.transaction.synchronization.internal.SynchronizationCallbackCoordinatorImpl.beforeCompletion(SynchronizationCallbackCoordinatorImpl.java:109) [hibernate-core-4.1.6.Final.jar:4.1.6.Final]
> at org.hibernate.engine.transaction.synchronization.internal.RegisteredSynchronization.beforeCompletion(RegisteredSynchronization.java:53) [hibernate-core-4.1.6.Final.jar:4.1.6.Final]
> at com.arjuna.ats.internal.jta.resources.arjunacore.SynchronizationImple.beforeCompletion(SynchronizationImple.java:76)
> at com.arjuna.ats.arjuna.coordinator.TwoPhaseCoordinator.beforeCompletion(TwoPhaseCoordinator.java:273)
> at com.arjuna.ats.arjuna.coordinator.TwoPhaseCoordinator.end(TwoPhaseCoordinator.java:93)
> at com.arjuna.ats.arjuna.AtomicAction.commit(AtomicAction.java:164)
My environment : AS 7.1 , Postresql 9.1 , JPA2 with hibernate , jbpm 5.3
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/756352#756352]
Start a new discussion in jBPM at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&con...]
13 years, 7 months
- 1
- 0
[JBoss Tools] - Matrix of supported platforms, runtimes and technologies in JBossTools/JBDS
by Max Rydahl Andersen
Max Rydahl Andersen [https://community.jboss.org/people/maxandersen] modified the document:
"Matrix of supported platforms, runtimes and technologies in JBossTools/JBDS"
To view the document, visit: https://community.jboss.org/docs/DOC-14297
--------------------------------------------------------------
h2. *This matrix is currently out of date, do not rely on it!*
The following matrix explains what versions of platforms, runtimes and technologies are supported by what versions of JBoss Tools/JBDS.
|| Eclipse || JBoss Tools || JBDS || EAP || AS || Seam || JSF || RichFaces (the latest supported version) || JDK(s) Supported by IDE *(not runtimes)* ||
| 4.2/Juno | 4.0.0 | 6.0 | 4.3,5.0,6.0 | 7.0,6.0,5.1, 5.0, 4.2, 4.0, 3.2 | 2.3, 2.2, 2.1, 2.0, 1.2 | 2.0 , 1.2, 1.1 | 3.3.x, 4.0.x | Win7, WinXP & RHEL6: JDK 7 or 6
Others: JDK 6 only - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.7/Indigo | 3.3.0 | 5.0 | 4.3,5.0,6.0 | 7.0,6.0,5.1, 5.0, 4.2, 4.0, 3.2 | 2.3, 2.2, 2.1, 2.0, 1.2 | 2.0, 1.2, 1.1 | 3.3.x, 4.0.x | JDK 6 only - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.6/Helios | 3.2.0 | 4.0.0/4.1.0 | 4.3,5.0 | 6.0,5.1, 5.0, 4.2, 4.0, 3.2 | 2.2, 2.1, 2.0, 1.2 | 2.0, 1.2, 1.1 | 3.3.x | WinXP and RHEL5: JDK 6 or 5
Others: JDK5 - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.5/Galileo | 3.1.0 | 3.0.0 | 4.3, 5.0 | 5.1, 5.0, 4.2, 4.0, 3.2 | 2.2, 2.1, 2.0, 1.2 | 2.0 (in VPE), 1.2, 1.1 | 3.3.x | WinXP and RHEL5: JDK 6 or 5
Others: JDK5 - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.4.2/Ganymede | 3.0.x | 2.1.0 | 4.3, 5.0 | 5.0, 4.2, 4.0, 3.2 | 2.2, 2.1, 2.0, 1.2 | 1.2, 1.1 | 3.3.1 | WinXP: JDK 6 or 5
Others: JDK 5 - Details (http://dev.eclipse.org/viewcvs/viewvc.cgi/www/eclipse/development/eclipse...) |
| 3.3.2/Europa | 2.1.2 | 1.1.0 | 4.3 | 5.0, 4.2, 4.0, 3.2 | 2.0, 1.2 | 1.2, 1.1 | 3.3.0 | JDK 5 - Details (http://dev.eclipse.org/viewcvs/viewvc.cgi/www/eclipse/development/eclipse...) |
| 3.3.1.1/Europa | 2.0.1 | 1.0.0 | 4.2 | 4.2, 4.0, 3.2 | 2.0, 1.2 | 1.2, 1.1 | 3.1.0 | JDK 5 - Details (http://dev.eclipse.org/viewcvs/viewvc.cgi/www/eclipse/development/eclipse...) |
--------------------------------------------------------------
Comment by going to Community
[https://community.jboss.org/docs/DOC-14297]
Create a new document in JBoss Tools at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=102&c...]
13 years, 7 months
- 1
- 0
[jBPM] - jBPM-5.3.0.Final Manual Deployment Guide for Beginner
by quangtin3
quangtin3 [https://community.jboss.org/people/quangtin3] modified the document:
"jBPM-5.3.0.Final Manual Deployment Guide for Beginner"
To view the document, visit: https://community.jboss.org/docs/DOC-21179
--------------------------------------------------------------
**
#1_Overview_of_jBPM 1. Overview of jBPM
***
#jBPM_Components jBPM Components
***
#Separation_deployment Separation deployment
**
#2_Common_bugs_fix_after_jBPM530Final_release 2. Common bugs fix after jBPM-5.3.0.Final release
***
#Building_from_sourcecode Building from source-code
****
#a_Configure_your_git_username_and_email a. Configure your git username and email
****
#b_Clone_jbpm_repository_from_githubcom b. Clone jbpm repository from github.com
****
#c_Working_with_local_repository c. Working with local repository
*****
#List_all_jBPM_tags_ List all jBPM tags
*****
#Switch_to_530Final_revision_tag Switch to 5.3.0.Final revision tag.
*****
#View_prehistory_just_before_jBPM_team_released_jBPM530Final View pre-history just before jBPM team released jBPM.5.3.0.Final
***
#Apply_bug_fix Apply bug fix
****
#Bug_Could_not_locate_named_parameter_userId Bug: Could not locate named parameter [userId]
****
#Bug_No_result_or_connection_timeout Bug: No result, or connection timeout
****
#Bug_Must_be_positive Bug: Must be positive
****
#Bug_HornetQ_binding_only_to_local_address Bug: HornetQ binding only to local address.
**
#3_Manual_jBPM_components_deployment 3. Manual jBPM components deployment
***
#Environment Environment
****
#Check_your_JDK_installation Check your JDK installation
****
#Check_apache_maven Check apache maven
****
#Check_apache_ant Check apache ant
***
#Deployment_parameters Deployment parameters
***
#MySQL_database_deployment_just_verify MySQL database deployment (just verify).
**
#4_Drools_guvnor_designer_and_formbuilder_deployment_with_verify 4. Drools guvnor, designer, and form-builder deployment (with verify)
***
#Step_41Extract_a_clean_copy_of_jbossas702Finalzip_to_GUVNOR_JBOSS Step 4.1:Extract a clean copy of jboss-as-7.0.2.Final.zip to GUVNOR_JBOSS
***
#Step_42_Jboss_configuration Step 4.2: Jboss configuration.
***
#Step_43_droolsguvnor_configuration Step 4.3: drools-guvnor configuration
****
#a_Update_GUVNOR_JBOSSpreferencesproperties_to_our_will_be_deployed_designer_and_formbuilder a. Update GUVNOR_JBOSS/preferences.properties to our will be deployed designer and form-builder
****
#b_Place_a_copy_of_GUVNOR_JBOSSpreferencesproperties_to_droolsguvnorwarWEBINFclassespreferencesproperties b. Place a copy of GUVNOR_JBOSS/preferences.properties to drools-guvnor.war/WEB-INF/classes/preferences.properties
***
#Step_44_Deploy_and_verify_droolsguvnor_component_installation Step 4.4: Deploy and verify drools-guvnor component installation
****
#a_Deploy_droolsguvnor a. Deploy drools-guvnor
****
#b_Verify_that_we_have_the_following_message_in_the_console b. Verify that we have the following message in the console
****
#c_Verify_that_we_can_access_the_droolsguvnor c. Verify that we can access the drools-guvnor
***
#Step_45_Deploy_designer Step 4.5: Deploy designer
****
#a_Apply_the_change_for_Designer_as_following_article_httpbpmgeekcomblogmakingjbpm5workremotehost_ a. Apply the change for Designer as following article http://bpmgeek.com/blog/making-jbpm5-work-remote-host
****
#b_Deploy_designer b. Deploy designer
****
#c_Verify_designer c. Verify designer
***
#Step_46_Deploy_formbuilder Step 4.6: Deploy form-builder
****
#a_Add_usersroles_configuration_to_GUVNOR_JBOSS a. Add users/roles configuration to GUVNOR_JBOSS
****
#b_Add_security_domain_for_jbpmformbuilder_in_file_standaloneconfigurationstandalonexml b. Add security domain for jbpm-form-builder in file standalone/configuration/standalone.xml
****
#c_Add_usersroles_to_jbpmformbuilderwarWEBINFclasses c. Add users/roles to jbpm-form-builder.war/WEB-INF/classes/
****
#d_Deploy_formbuilder_and_verify_like_we_already_did_with_designer d. Deploy form-builder and verify like we already did with designer
****
#e_Verify_that_you_have e. Verify that you have
**
#5_TaskService_or_Human_Task_deployment_with_verify 5. Task-Service or Human Task deployment (with verify).
***
#Step_51Extract_a_clean_copy_of_jbossas702Finalzip_to_HUMAN_TASK_JBOSS Step 5.1:Extract a clean copy of jboss-as-7.0.2.Final.zip to HUMAN_TASK_JBOSS
***
#Step_52_Copy_your_custom_build_humantask_ Step 5.2: Copy your custom build human-task
***
#Step_53_Jboss_standalonexml_configuration_ Step 5.3: Jboss standalone.xml configuration
****
#a_Remove_pojo_and_jpa_modules a. Remove pojo and jpa modules
*****
#Pojo_extension Pojo extension
*****
#And_pojo_domain And pojo domain
*****
#Jpa_extention Jpa extention
*****
#_And_jpa_domain And jpa domain
****
#b_Change_port_for_management_interface_HUMAN_TASK_MANAGEMENT_PORTs b. Change port for management interface (HUMAN_TASK_MANAGEMENT_PORTs)
****
#c_Add_datasource_for_taskservice c. Add datasource for task-service
****
#d_Bind_to_HUMAN_TASK_IP d. Bind to HUMAN_TASK_IP
****
#e_Set_offsetport e. Set offset-port
***
#Step_54_MySQL_driver_for_jboss Step 5.4: MySQL driver for jboss
****
#a_Create_MySQL_module_directory a. Create MySQL module directory
****
#bCopy_module_declaration_file b.Copy module declaration file
****
#c_Download_and_install_mysql_driver_to_jBoss c. Download and install mysql driver to jBoss
****
#d_Start_your_HUMAN_TASK_JBOSS_now d. Start your HUMAN_TASK_JBOSS now
***
#Step_55_jbpmhumantaskwarwar_configuration Step 5.5: jbpm-human-task-war.war configuration
****
#a_In_your_jbpmhumantaskwarwar_file_make_following_modification_with_your_current_archive_manager a. In your jbpm-human-task-war.war file, make following modification with your current archive manager
****
#b_Configure_your_WEBINFwebxml_as_following b. Configure your WEB-INF/web.xml as following
*****
#Make_HornetQ_as_active_transport Make HornetQ as active transport
*****
#Set_HornetQ_binding_address_and_port_Remember_our_fix_at_the_end_of_part_2_to_HUMAN_TASK_IP_and_HORNETQ_PORT Set HornetQ binding address and port (Remember our fix at the end of part 2) to HUMAN_TASK_IP and HORNETQ_PORT
*****
#Optional_Task_service_persistence_unit_name_we_will_use_default_value_so_you_can_keep_it_blank Optional: Task service persistence unit name, we will use default value so you can keep it blank
*****
#User_demo_usergroup_callback_implementation User demo user/group call-back implementation
*****
#Using_demo_user_and_group_provider Using demo user and group provider
****
#c_Configure_persistencexml_ c. Configure persistence.xml
*****
#Change_jbpmDS_to_taskDS Change jbpmDS to taskDS
*****
#Modify_properties_to_your_MySQL_IP_and_MySQL_PORT Modify properties to your MySQL_IP and MySQL_PORT
****
#d_Update_jpbmhumantaskwarwarWEBINFclassesMETAINFpersistencexml d. Update jpbm-human-task-war.war/WEB-INF/classes/META-INF/persistence.xml
****
#e_Deploy_formbuilder_and_verify_like_we_already_did_with_designer e. Deploy form-builder and verify like we already did with designer
****
#e_Verify_HumanTask e. Verify Human-Task
*****
#Verify_that_you_have_message_like_this Verify that you have message like this
*****
#And_your_check_if_you_can_telnet_to_HUMAN_TASK_IPHORNETQ_PORT_from_CONSOLE_IP And your check if you can telnet to HUMAN_TASK_IP:HORNETQ_PORT from CONSOLE_IP
**
#6_jBPMConsole_deployment_with_verify 6. jBPM-Console deployment (with verify).
***
#Step_61Extract_a_clean_copy_of_jbossas702Finalzip_to_CONSOLE_JBOSS Step 6.1:Extract a clean copy of jboss-as-7.0.2.Final.zip to CONSOLE_JBOSS
***
#Step_62_Add_usersroles_configuration_to_CONSOLE_JBOSS Step 6.2 Add users/roles configuration to CONSOLE_JBOSS
***
#Step_63_Copy_your_custom_build_jbpmconsole Step 6.3: Copy your custom build jbpm-console
***
#Step_64_Jboss_standalonexml_configuration Step 6.4: Jboss standalone.xml configuration
****
#a_Remove_pojo_and_jpa_modules_933043 a. Remove pojo and jpa modules
*****
#Pojo_extension_299010 Pojo extension
*****
#And_pojo_domain_261011 And pojo domain
*****
#Jpa_extention_854502 Jpa extention
*****
#And_jpa_domain And jpa domain
****
#b_Change_port_for_management_interface_CONSOLE_MANAGEMENT_PORT b. Change port for management interface (CONSOLE_MANAGEMENT_PORT)
****
#c_Add_datasource c. Add datasource
****
#d_Add_security_domain_for_jbpmconsole d. Add security domain for jbpm-console
****
#e_Bind_to_CONSOLE_IP_For_example e. Bind to CONSOLE_IP. For example
****
#f_Set_offsetport f. Set offset-port
***
#Step_65_MySQL_driver_for_jboss_identical_with_Step_54 Step 6.5: MySQL driver for jboss (identical with Step 5.4)
****
#a_Create_MySQL_module_directory_534607 a. Create MySQL module directory
****
#bCopy_module_declaration_file_563482 b.Copy module declaration file
****
#c_Download_and_install_mysql_driver_to_jBoss_811673 c. Download and install mysql driver to jBoss
****
#d_Start_your_CONSOLE_JBOSS_now d. Start your CONSOLE_JBOSS now
***
#Step_66_Gwtconsoleserverwar_configuration Step 6.6: Gwt-console-server.war configuration
****
#a_Add_usersroles_to_gwtconsoleserverwarWEBINFclasses a. Add users/roles to gwt-console-server.war/WEB-INF/classes/
****
#b_Configure_persistencexml b. Configure persistence.xml
*****
#Add_mapping_for_ProcessInstanceInfohbmxml Add mapping for ProcessInstanceInfo.hbm.xml
*****
#Change_to_MySQL_database Change to MySQL database
*****
#Mark_Hibernate_to_show_sql Mark Hibernate to show_sql
*****
#Your_persistencexml_will_look_something_like_this Your persistence.xml will look something like this
****
#c_Add_updated_persistencexml_and_ProcessInstanceInfohbmxml_to_gwtconsolerserverwar c. Add updated persistence.xml and ProcessInstanceInfo.hbm.xml to gwt-consoler-server.war
****
#d_Configure_jbpmconsole_to_binding_on_CONSOLE_IP_and_connect_to_remote_GUVNOR_IP d. Configure jbpm-console to binding on CONSOLE_IP and connect to remote GUVNOR_IP
***
#Step_67_Deployment Step 6.7: Deployment
**
#7_Whats_next 7. What's next?
***
#Upgrading_to_the_Jbossas711Final_works Upgrading to the Jboss-as-7.1.1.Final works
***
#Using_the_Designer230Final_works Using the Designer-2.3.0.Final works
***
#Jbpmconsole_sourcecode_is_a_treasure_for_studying_jBPM_integration Jbpm-console source-code is a treasure for studying jBPM integration.
*Disclaimer:* First, Almost material in this article I borrowed form all over the public web. Some of most borrowed source are (in order):
* Extract from jbpm-install/build.xml Ant script.
* jBPM official user-guide: http://docs.jboss.org/jbpm/v5.3/userguide/ http://docs.jboss.org/jbpm/v5.3/userguide/
* jBPM community user forum: https://community.jboss.org/community/jbpm?view=discussions https://community.jboss.org/en/jbpm?view=discussions
* BPM Geek: http://bpmgeek.com/blog/making-jbpm5-work-remote-host http://bpmgeek.com/blog/making-jbpm5-work-remote-host
Second, This article only provides a step by step manually deployment of each jBPM-5.3.0.Final components. It was written by a jBPM beginner. For the official document please refer to: http://docs.jboss.org/jbpm/v5.3/userguide/ http://docs.jboss.org/jbpm/v5.3/userguide/
Third, this article example is in Linux. Maybe I will add ant scripts (again, heavily extract from jbpm-install/build.xml) for faster deployment and more Windows friendlier.
h2. 1. Overview of jBPM
h3. jBPM Components
Download a copy of jbpm-5.3.0.Final-installer-full.zip ( http://sourceforge.net/projects/jbpm/files/jBPM%205/jbpm-5.3.0.Final/ http://sourceforge.net/projects/jbpm/files/jBPM%205/jbpm-5.3.0.Final/) and extract it to a location, from now on we call it JBPM_INSTALL. JBPM_INSTALL contains all core jBPM components.
|| *Components
* || *File in JBPM_INSTALL/lib*
|| *Description
* ||
| jbpm-runtime | jbpm-5.3.0.Final-bin.zip | jBPM Runtime, if you are willing to build a stand alone Java application you will need this. |
| drools-guvnor | guvnor-distribution-wars-5.4.0-20120516.war | Drools-Guvnor provides process repository. |
| designer | designer-2.2.Final-jboss7.war | JBPM2 process designer. It's integrated with drools-guvnor. |
| form-builder | jbpm-5.3.0.Final-form-builder.war | Form builder. It's going to be integrated with the designer. http://blog.athico.com/2012/07/jbpm-form-builder-state-of-art.html |
| gwt-console and gwt-console-server | jbpm-5.3.0.Final-gwt-console.zip |
|
| human-task | jbpm-5.3.0.Final-human-task-war.zip |
|
Table 01: jBPM.5.3.0.Final components and their binary file
https://community.jboss.org/servlet/JiveServlet/showImage/19247/jBPM+-+In... https://community.jboss.org/servlet/JiveServlet/downloadImage/19247/jBPM+...
Figure 01: jBPM-Internal components communication
The communication between component as described in Figure-01, this article use MySQL. But by default, jbpm-install with "ant start.demo" will run with H2 database. From this communication view we can separate each component deployment. Event on each application server.
https://community.jboss.org/servlet/JiveServlet/showImage/19248/jBPM+-+Ec... https://community.jboss.org/servlet/JiveServlet/downloadImage/19248/jBPM+...
Figure 02: The communication with Eclipse IDE
h3. Separation deployment
For a beginner, with all jBPM components are twisted together:
* It's hard to tell which message of what components. When something go wrong, which one to focus, which one to just ignore.
* Need a way to check each component is up and running.
* Just a way to learn and experience with jBPM.
Purely from this experience and conclusion, this article will provides a manual installation of each jBPM-5.3.0.Final component.
h2. 2. Common bugs fix after jBPM-5.3.0.Final release
h3. Building from source-code
As a beginner I occasionally meet this kind of error {userId parameter, no result, must be positive, hornetq remote ..}. Some are must apply the fix before you can go on further. The commits after jBPM-5.3.0.Final does fix the bug but also introduces incompatible with other jBPM.5.3.0.Final. So this part will describes how to checkout Original jBPM-5.3.0.Final release source code; find the Fixed patch and apply to your local branch.
For more detailed git document, please refer to other document. This article only using related git commands.
h4. a. Configure your git username and email
# For your local branche
git config --global user.name "Your Name"
git config --global user.email "your_email(a)addr.ess"
h4. b. Clone jbpm repository from github.com
# We only need jbpm.git, because in version 5.3.0.Final all component on the same git repository.
git clone https://github.com/droolsjbpm/jbpm.git
# We have local git reposistory. We will call its directory path as jBPM_SOURCE
cd jbpm/
mvn clean install -U -Dfull -DskipTests
Optional: in "mvn clean install -U -Dfull -DskipTests" above, We can add -nsu (no snapshot update) for faster build. Because we're only aware specific on 5.3.0.Final revision and its dependencies.
mvn clean install -U -Dfull -DskipTests -nsu
This command really takes a while, especially for the first time and your empty maven local repository.
h4. c. Working with local repository
The jbpm is a typical maven parent project with multiple module. Two of theme {human-task; gwt-console} are parent project too. From now on, you can use your favorite IDE with JavaEE profile to work with this checked out repository, showing diff and applying patch. Otherwise you can using git command as following example:
h5. List all jBPM tags
# From your jBPM_SOURCE, show tags
git tag
The output will be something like this:
5.0-CR1
5.0.0
5.1.0.CR1
5.1.0.Final
5.1.0.M1
5.1.1.Final
5.1.2.Final
5.2.0.Final
5.2.1.Final
5.2.2.Final
5.3.0.CR1
5.3.0.Final
h5. Switch to 5.3.0.Final revision tag.
Chose your local branch name, for example: update.after.5.3.0.final
git checkout 5.3.0.Final -b update.after.5.3.0.final
Result message
Switched to a new branch 'update.after.5.3.0.final'
h5. View pre-history just before jBPM team released jBPM.5.3.0.Final
git log
Example output
***@***:~/Tutorial/jbpm$ git log
commit d7640b9c0ba87d771862e8534cc607ca0f4d1aff
Author: Toni Rikkola <toni(a)rikkola.net>
Date: Mon May 14 13:25:30 2012 +0300
change to 5.4.0.Final version
commit 88440fe1430170458981c2752192df2c64c83636
Author: Maciej Swiderski <mswiders(a)redhat.com>
Date: Wed May 9 19:22:35 2012 +0200
BZ820210 - Could not initialize stateful knowledge session: loader constraint violation when using HornetQ task service strategy
commit 80f940e2e860ac640a75114ab2780f6c2b7a865c
Author: salaboy <salaboy(a)gmail.com>
Date: Wed May 9 15:04:54 2012 +0100
- mvel workaround
...
Build your own jBPM.5.3.0.Final for the first time
mvn clean install -U -Dfull -DskipTests -nsu
Now you can working with your local git repository, update the 5.3.0.Final tag with the patch you need. All your commit will be stored on update.after.5.3.0.final branches.
h3. Apply bug fix
h4. Bug: Could not locate named parameter [userId]
Full message
java.lang.IllegalArgumentException: org.hibernate.QueryParameterException: could not locate named parameter [userId]
Community thread:
https://community.jboss.org/message/738335#738335 https://community.jboss.org/message/738335#738335
https://community.jboss.org/thread/200361 https://community.jboss.org/thread/200361
Fix commit: 4a47527163854b233cdb9599f54c9320e945a372
h4. Bug: No result, or connection timeout
Message
java.lang.RuntimeException: Timeout : unable to retrieve results
Treatment: With this particular deployment {separating components deployment, using MySQL} I haven't meet this error yet.
h4. Bug: Must be positive
Full message:
2011-07-18 18:46:35,546 [FATAL] Uncaught Exception:
java.lang.IllegalArgumentException:
must be positive
at Unknown.cKb(Unknown source:0)
Fix: Not yet. (I think) this comes from GWT bug. GWT is the Google Web Toolkit that jBPM-Console are using. Just ignore it and continue with your work.
h4. Bug: HornetQ binding only to local address.
There aren't any configuration for Human-Task-War to bind on particular address. And by default it only listen on local address so Gwt-Console-Server cannot connect to it. Our separating deployment needs Gwt-Console-Server to connect to Human-Task, so apply the change-set below:
Bug track link: https://issues.jboss.org/browse/JBPM-3720?page=com.atlassian.jira.plugin.... https://issues.jboss.org/browse/JBPM-3720?page=com.atlassian.jira.plugin....
Change set: https://source.jboss.org/changelog/jBPM?cs=e115680b023ce0747608625f0cd616... https://source.jboss.org/changelog/jBPM?cs=e115680b023ce0747608625f0cd616...
h2. 3. Manual jBPM components deployment
h3. Environment
h4. Check your JDK installation
# Check JAVA_HOME environment variable arcording to your operating system. In linux
echo $JAVA_HOME
# JDK Java version 1.6 or newer
java -version
h4. Check apache maven
Download and installation instruction: http://maven.apache.org/download.html http://maven.apache.org/download.html
# Check M2 and M2_HOME environment variables acording to your operating system. In linux
echo $M2
echo $M2_HOME
# Check Apache Maven installation
mvn -version
h4. Check apache ant
Download: http://ant.apache.org/bindownload.cgi http://ant.apache.org/bindownload.cgi and manual: http://ant.apache.org/manual/index.html http://ant.apache.org/manual/index.html
# Check ANT_HOME environment variables acording to your operating system. In linux
echo $ANT_HOME
# And ANT_OPTS if it's nessessary. For example proxy configuration
echo $ANT_OPTS
-Dhttp.proxyHost=192.168.193.12 -Dhttp.proxyPort=3128
# Check Apache Ant installation
ant -version
h3. Deployment parameters
|| *Name
* || *Variables
* || *Example values* ||
| Jbpm-install | JBPM_INSTALL | /opt/download/jbpm-install |
| MySQL username/password and schema | MySQL_JBPM
MySQL_TASK | jbpm,jbpmpassword and schema name is jbpm
task,taskpassword and schema name is task |
| MySQL server IP/PORT | MySQL_IP:MySQL_PORT | 192.168.140.39:3306 |
| Group-01 components: {Drool-guvnor, Designer, Form-Builder} | GUVNOR_JBOSS
GUVNOR_IP
GUVNOR_HTTP_PORT
GUVNOR_MANAGEMENT_PORT | /opt/guvnor_jboss
192.168.140.39
8080
9999 and 9990 |
| Group-02: Human-task | HUMAN_TASK_JBOSS
HUMAN_TASK_IP
HUMAN_TASK_HTTP_PORT
HUMAN_TASK_MANAGEMENT_PORT
HUMAN_TASK_PORT-OFFSETHORNETQ_PORT | /opt/human_task_jboss
192.168.140.39
8180
10099 and 10090
port-offset="100"
1234 (Don't use default value, because we want to know if this configuratio affect or not)
|
| Group-03: Gwt-Console and Gwt-Console-Server | CONSOLE_JBOSS
CONSOLE_IP
CONSOLE_HTTP_PORT
CONSOLE_MANAGEMENT_POR
CONSOLE_PORT_OFFSET | /opt/console_jboss
192.168.140.39
8280
10199 and 10190
port-offset="200" |
Table 02 - Deployment parameters
The "example value column" in Table 02 are values from a real deployment with all jboss instances running on the same machine. https://community.jboss.org/docs/DOC-16705 https://community.jboss.org/wiki/MultipleInstancesOfJBossAS7OnTheSameMachine (Approach#1)
h3. MySQL database deployment (just verify).
Verify that you can connect and login to MySQL:
# From server HUMAN_TASK_IP to MySQL_IP:MySQL_PORT
mysql -h MySQL_IP -P MySQL_Port -u MySQL_TASK -pMySQL_TASK_PASSWORD
# From server JBPM_IP to MYSQL_IP:MySQL_PORT
mysql -h MySQL_IP -P MySQL_Port -u MySQL_JBPM -pMySQL_JBPM_PASSWORD
# Note: -P (capitalized) for port; and -p (lowercase) for password.
# No space between -p and MySQL_TASK_PASSWORD. For example:
# mysql -h 192.168.140.39 -P 3306 -u task -ptaskpassword
# mysql -h 192.168.140.39 -P 3306 -u jbpm -pjbpmpassword
After this, We can just forget about firewall, network routing, MySQL permission issues incase our persistence not work. For MySQL related document http://dev.mysql.com/doc/refman/5.0/en/connecting.html http://dev.mysql.com/doc/refman/5.0/en/connecting.html
h2. 4. Drools guvnor, designer, and form-builder deployment (with verify)
Login to server on GUVNOR_IP and place a copy of jbpm-install and start the installation:
h3. Step 4.1:Extract a clean copy of jboss-as-7.0.2.Final.zip to GUVNOR_JBOSS
# Set our GUVNOR_JBOSS to this example path
export GUVNOR_JBOSS=/opt/guvnor_jboss
echo $GUVNOR_JBOSS
# Go to JBPM_INSTALL directory
cd /opt/download/
unzip jbpm-5.3.0.Final-installer-full.zip
cd /opt/download/jbpm-installer
# Extract a clean copy of jboss application server. To move to /opt we need root permission.
unzip lib/jboss-as-7.0.2.Final.zip
sudo mv jboss-as-7.0.2.Final $GUVNOR_JBOSS
# Copy guvnor, designer, form-builder
cp lib/guvnor-distribution-wars-5.4.0-20120516.war $GUVNOR_JBOSS/drools-guvnor.war
cp lib/designer-2.2.Final-jboss7.war $GUVNOR_JBOSS/designer.war
cp lib/jbpm-5.3.0.Final-form-builder.war $GUVNOR_JBOSS/jbpm-form-builder.war
# And their configurations file
cp conf/guvnor.preferences.properties $GUVNOR_JBOSS/preferences.properties
cp auth/users.properties $GUVNOR_JBOSS/
cp auth/roles.properties $GUVNOR_JBOSS/
cd $GUVNOR_JBOSS
h3. Step 4.2: Jboss configuration.
# Change GUVNOR_JBOSS/standalone/configuration/standalone.xml to bind to GUVNOR_IP. For example
<interfaces>
<interface name="management">
<inet-address value="${jboss.bind.address.management:192.168.140.39}"/>
</interface>
<interface name="public">
<inet-address value="${jboss.bind.address:192.168.140.39}"/>
</interface>
</interfaces>
h3. Step 4.3: drools-guvnor configuration
h4. a. Update GUVNOR_JBOSS/preferences.properties to our will be deployed designer and form-builder
...
#Designer configuration. Change to GUVNOR_IP and GUVNOR_HTTP_PORT, in our example:
designer.url=http://192.168.140.39:8080
#Do not change this unless you know what are you doing
designer.context=designer
designer.profile=jbpm
#FormBuilder configuration
#Do not change this unless you know what are you doing. Change to GUVNOR_IP and GUVNOR_HTTP_PORT, in our example:
formbuilder.url=http://192.168.140.39:8080
formbuilder.context=jbpm-form-builder
formbuilder.profile=guvnor
h4. b. Place a copy of GUVNOR_JBOSS/preferences.properties to drools-guvnor.war/WEB-INF/classes/preferences.properties
# User your favorist archive manager.
Using "Open with Archive Manager" in Ubuntu Linux
h3. Step 4.4: Deploy and verify drools-guvnor component installation
h4. a. Deploy drools-guvnor
# Set our GUVNOR_JBOSS to this example path
export GUVNOR_JBOSS=/opt/guvnor_jboss
cd $GUVNOR_JBOSS
# Deploy drools-guvnor
cp drools-guvnor.war standalone/deployments/
# Verify drools-guvnor by start GUVNOR_JBOSS
bin/standalone.sh
h4. b. Verify that we have the following message in the console
...
11:55:46,779 INFO [org.jboss.web] (MSC service thread 1-2) registering web context: /drools-guvnor
11:55:46,844 INFO [org.jboss.as.server.controller] (DeploymentScanner-threads - 2) Deployed "drools-guvnor.war
h4. c. Verify that we can access the drools-guvnor
Access the http://GUVNOR_IP:8080/drools-guvnor http://GUVNOR_IP:GUVNOR_HTTP_PORT/drools-guvnor (In our example is http://192.168.140.39:8080 http://192.168.140.39:8080/drools-guvnor) with the browser from GUVNOR_IP and CONSOLE_IP
h3. Step 4.5: Deploy designer
h4. a. Apply the change for Designer as following article http://bpmgeek.com/blog/making-jbpm5-work-remote-host
Lock for the section +"Saving and reloading process in designer could cause failures"+ at the end of that post, we need to make following change to designer.war/profiles/jbpm.xml
<externalloadurl protocol="http" host="GUVNOR_IP:GUVNOR_PORT" subdomain="drools-guvnor/org.drools.guvnor.Guvnor/oryxeditor" usr="admin" pwd="admin"/>
In our example
<externalloadurl protocol="http" host="192.168.140.39:8080" subdomain="drools-guvnor/org.drools.guvnor.Guvnor/oryxeditor" usr="admin" pwd="admin"/>
h4. b. Deploy designer
Simple by copy to jboss deployment directory, or with our example in Linux
# Set our GUVNOR_JBOSS to this example path
export GUVNOR_JBOSS=/opt/guvnor_jboss
cd $GUVNOR_JBOSS
# Deploy designer
cp designer.war standalone/deployments/
h4. c. Verify designer
Start jboss and verify that we have something like this
09:47:56,841 INFO [org.jboss.as.server.controller] (DeploymentScanner-threads - 2) Deployed "designer.war"
09:47:56,841 INFO [org.jboss.as.server.controller] (DeploymentScanner-threads - 2) Deployed "drools-guvnor.war"
https://community.jboss.org/servlet/JiveServlet/showImage/19266/Screensho... https://community.jboss.org/servlet/JiveServlet/downloadImage/19266/Scree...
Figure 03: Verify designer installation
User your browser to connect to http://GUVNOR_IP:8080/drools-guvnor http://GUVNOR_IP:GUVNOR_HTTP_PORT/drools-guvnor (or http://192.168.140.39:8080/drools-guvnor http://192.168.140.39:8080/drools-guvnor in our example), on Left side bar, select "Knowledge Base" \ "Packages" , then select "Create New" \ "New BPMN2 Process" as Figure 02 above, note that if you can create/edit and save your process.
h3. Step 4.6: Deploy form-builder
h4. a. Add users/roles configuration to GUVNOR_JBOSS
# Set our GUVNOR_JBOSS to this example path
export GUVNOR_JBOSS=/opt/guvnor_jboss
cd $GUVNOR_JBOSS
cp users.properties standalone/configuration/
cp roles.properties standalone/configuration/
h4. b. Add security domain for jbpm-form-builder in file standalone/configuration/standalone.xml
<subsystem xmlns="urn:jboss:domain:security:1.0">
<security-domains>
..
<security-domain name="jbpm-form-builder" cache-type="default">
<authentication>
<login-module code="UsersRoles" flag="required">
<module-option name="usersProperties" value="${jboss.server.config.dir}/users.properties"/>
<module-option name="rolesProperties" value="${jboss.server.config.dir}/roles.properties"/>
</login-module>
</authentication>
</security-domain>
..
</security-domains>
</subsystem>
h4. c. Add users/roles to jbpm-form-builder.war/WEB-INF/classes/
Using your current Archive Manager to add users.properties and roles.properties to jbpm-form-builder.war/WEB-INF/classes/
d. Make form-builder work with remote guvnor repository, like we did with the Designer
Configure using the Spring configuration files. Change jbpm-form-builder.war/WEB/INF/springComponents.xml to GUVNOR_IP:GUVNOR_HTTP_PORT
<!-- Guvnor configuration -->
<bean id="guvnorUrl" class="java.lang.String">
<constructor-arg type="java.lang.String" value="http://GUVNOR_IP:GUVNOR_HTTP_PORT/drools-guvnor"/>
</bean>
In our example
<!-- Guvnor configuration -->
<bean id="guvnorUrl" class="java.lang.String">
<constructor-arg type="java.lang.String" value="http://192.168.140.39:8080/drools-guvnor"/>
</bean>
h4. d. Deploy form-builder and verify like we already did with designer
cp jbpm-form-builder.war standalone/deployments/
# Start GUVNOR_JBOSS
bin/standalone.sh
h4. e. Verify that you have
* Verify in your GUVNOR_JBOSS/standalone/logs/server.log
10:36:52,907 INFO [org.jboss.as.server.controller] (DeploymentScanner-threads - 2) Deployed "drools-guvnor.war"
* Verify that http://GUVNOR_IP:8080/jbpm-form-builder http://GUVNOR_IP:GUVNOR_HTTP_PORT/jbpm-form-builder ( http://192.168.140.39:8080/jbpm-form-builder http://192.168.140.39:8080/jbpm-form-builder) works.
* Verify that form-builder and guvnor repository integration works by creating a new "Form Definitions" as in Figure 04.
https://community.jboss.org/servlet/JiveServlet/downloadImage/19305/verif... (https://community.jboss.org/servlet/JiveServlet/showImage/19305/verify-fo...)
Figure 04: Verify form-builder and guvnor integration
h2. 5. Task-Service or Human Task deployment (with verify).
Login to server on HUMAN_TASK_IP and place a copy of jbpm-install and start the installation:
h3. Step 5.1:Extract a clean copy of jboss-as-7.0.2.Final.zip to HUMAN_TASK_JBOSS
# Set our HUMAN_TASK_JBOSS to this example path
export HUMAN_TASK_JBOSS=/opt/human_task_jboss
echo $HUMAN_TASK_JBOSS
# Go to JBPM_INSTALL directory
cd /opt/download/
unzip jbpm-5.3.0.Final-installer-full.zip
cd /opt/download/jbpm-installer
# Extract a clean copy of jboss application server. To move to /opt we need root permission.
unzip lib/jboss-as-7.0.2.Final.zip
sudo mv jboss-as-7.0.2.Final $HUMAN_TASK_JBOSS
# And jbpm transactin manager library
cp jbpm-tm.jar $HUMAN_TASK_JBOSS/
# Task persistence.xml
cp task-service/resources/war/persistence.xml $HUMAN_TASK_JBOSS/
# MySQL module configuration
cp db/driver_jar_module.xml $HUMAN_TASK_JBOSS/module.xml
cd $HUMAN_TASK_JBOSS
h3. Step 5.2: Copy your custom build human-task
>From JBPM_SOURCE/jbpm-human-task/jbpm-human-task-war/target
To $HUMAN_TASK_JBOSS/jbpm-human-task-war.war
h3. Step 5.3: Jboss standalone.xml configuration
Change HUMAN_TASK_JBOSS/standalone/configuration/standalone.xml as following
h4. a. Remove pojo and jpa modules
h5. Pojo extension
<extension module="org.jboss.as.osgi"/>
<!-- Remove this line extension module="org.jboss.as.pojo"/-->
<extension module="org.jboss.as.remoting"/>
h5. And pojo domain
<subsystem xmlns="urn:jboss:domain:naming:1.0" />
<!--subsystem xmlns="urn:jboss:domain:pojo:1.0" /-->
<subsystem xmlns="urn:jboss:domain:osgi:1.0" activation="lazy">
h5. Jpa extention
<extension module="org.jboss.as.jmx"/>
<!--extension module="org.jboss.as.jpa"/-->
<extension module="org.jboss.as.logging"/>
h5. And jpa domain
<!--subsystem xmlns=urn:jboss:domain:jpa:1.0>
<jpa default-datasource=""/>
</subsystem-->
h4. b. Change port for management interface (HUMAN_TASK_MANAGEMENT_PORTs)
<management-interfaces>
<native-interface interface="management" port="10099" />
<http-interface interface="management" port="10090"/>
</management-interfaces>
h4. c. Add datasource for task-service
<subsystem xmlns="urn:jboss:domain:datasources:1.0">
<datasources>
<datasource jndi-name="java:jboss/datasources/taskDS" pool-name="MysqlTaskDSPool" enabled="true" jta="true" use-java-context="true" use-ccm="true">
<connection-url>
jdbc:mysql://192.168.140.39:3306/task
</connection-url>
<driver>
mysql
</driver>
<pool>
<prefill>
false
</prefill>
<use-strict-min>
false
</use-strict-min>
<flush-strategy>
FailingConnectionOnly
</flush-strategy>
</pool>
<security>
<user-name>
task
</user-name>
<password>
taskpassword
</password>
</security>
</datasource>
<drivers>
<driver name="mysql" module="com.mysql">
<xa-datasource-class>
com.mysql.jdbc.jdbc2.optional.MysqlXADataSource
</xa-datasource-class>
</driver>
</drivers>
</datasources>
</subsystem>
h4. d. Bind to HUMAN_TASK_IP
In our example
<interfaces>
<interface name="management">
<inet-address value="${jboss.bind.address.management:192.168.140.39}"/>
</interface>
<interface name="public">
<inet-address value="${jboss.bind.address:192.168.140.39}"/>
</interface>
</interfaces>
h4. e. Set offset-port
For our example to running on the same server as in https://community.jboss.org/docs/DOC-16705 https://community.jboss.org/wiki/MultipleInstancesOfJBossAS7OnTheSameMachine (Approach#1)
<socket-binding-group name="standard-sockets" default-interface="public" port-offset="100">
h3. Step 5.4: MySQL driver for jboss
h4. a. Create MySQL module directory
mkdir modules/com/mysql
mkdir modules/com/mysql/main
h4. b.Copy module declaration file
cp module.xml modules/com/mysql/main/
h4. c. Download and install mysql driver to jBoss
wget https://repository.jboss.org/nexus/service/local/repositories/central/con...
cp mysql-connector-java-5.1.18.jar modules/com/mysql/main/mysql-connector-java.jar
h4. d. Start your HUMAN_TASK_JBOSS now
bin/standalone.sh
To verify your configuration
* Does it start Ok?
* MySQL driver loaded?
* Can you see taskDS datasource on jBoss admin console at http://HUMAN_TASK_IP:10099/ http://HUMAN_TASK_IP:HUMAN_TASK_MANAGEMENT_PORT/ (In our example http://192.168.140.39:10090/)?
https://community.jboss.org/servlet/JiveServlet/showImage/19269/human_tas... https://community.jboss.org/servlet/JiveServlet/downloadImage/19269/human... Figure 05: Veriry DataSource configuration of HUMAN_TASK_JBOSS
h3. Step 5.5: jbpm-human-task-war.war configuration
h4. a. In your jbpm-human-task-war.war file, make following modification with your current archive manager
Remove WEB-INF/lib/netty-3.2.0.Final.jar
Add jbpm-tm.jar to WEB-INF/lib/
h4. b. Configure your WEB-INF/web.xml as following
h5. Make HornetQ as active transport
<!-- active configuration on of hornetq|mina|jms (defauls to hornetq) -->
<init-param>
<param-name>active.config</param-name>
<param-value>hornetq</param-value>
</init-param>
h5. Set HornetQ binding address and port (Remember our fix at the end of part 2) to HUMAN_TASK_IP and HORNETQ_PORT
<!-- HornetQ configuration parameters -->
<init-param>
<param-name>hornetq.host</param-name>
<param-value>192.168.140.39</param-value>
</init-param>
<init-param>
<param-name>hornetq.port</param-name>
<param-value>1234</param-value>
</init-param>
h5. Optional: Task service persistence unit name, we will use default value so you can keep it blank
<!-- Task Service configuration independent of transport -->
<init-param>
<param-name>task.persistence.unit</param-name>
<param-value>org.jbpm.task</param-value>
</init-param>
h5. User demo user/group call-back implementation
<!-- use org.jbpm.task.service.DefaultUserGroupCallbackImpl to configure sample user group callback for demo purpose-->
<init-param>
<param-name>user.group.callback.class</param-name>
<param-value>org.jbpm.task.service.DefaultUserGroupCallbackImpl</param-value>
</init-param>
h5. Using demo user and group provider
<!-- use classpath:/org/jbpm/task/servlet/SampleUsers.mvel to configure sample users for demo purpose-->
<!-- DefaultUsers.mvel is used to insert Administrator as it is required for task server to operate -->
<init-param>
<param-name>load.users</param-name>
<param-value>classpath:/org/jbpm/task/servlet/SampleUsers.mvel</param-value>
</init-param>
<!-- use classpath:/org/jbpm/task/servlet/SampleGroups.mvel to configure sample users for demo purpose-->
<init-param>
<param-name>load.groups</param-name>
<param-value>classpath:/org/jbpm/task/servlet/SampleGroups.mvel</param-value>
</init-param>
Look at attachement for the file jbpm_human_task_web.xml, a full copy of our example jbpm-human-task-war/WEB-INF/web.xml
h4. c. Configure persistence.xml
h5. Change jbpmDS to taskDS
<non-jta-data-source>java:jboss/datasources/taskDS</non-jta-data-source>
h5. Modify properties to your MySQL_IP and MySQL_PORT
<properties>
<property name="hibernate.dialect" value="org.hibernate.dialect.MySQLDialect"/>
<property name="hibernate.connection.driver_class" value="com.mysql.jdbc.Driver"/>
<property name="hibernate.connection.url" value="jdbc:mysql://MySQL_IP:MySQL_PORT/task" />
<property name="hibernate.connection.username" value="task"/>
<property name="hibernate.connection.password" value="taskpassword"/>
<property name="hibernate.connection.autocommit" value="false" />
<property name="hibernate.max_fetch_depth" value="3"/>
<property name="hibernate.hbm2ddl.auto" value="create" />
<property name="hibernate.show_sql" value="true" />
</properties>
In our example:
<properties>
<property name="hibernate.dialect" value="org.hibernate.dialect.MySQLDialect"/>
<property name="hibernate.connection.driver_class" value="com.mysql.jdbc.Driver"/>
<property name="hibernate.connection.url" value="jdbc:mysql://192.168.140.39:3306/task" />
<property name="hibernate.connection.username" value="task"/>
<property name="hibernate.connection.password" value="taskpassword"/>
<property name="hibernate.connection.autocommit" value="false" />
<property name="hibernate.max_fetch_depth" value="3"/>
<property name="hibernate.hbm2ddl.auto" value="create" />
<property name="hibernate.show_sql" value="true" />
</properties>
Look at attachment for the file jbpm_human_task_persistence.xml, a full copy of our example jbpm-human-task-war/WEB-INF/classes/META-INF/persistence.xml
h4. d. Update jpbm-human-task-war.war/WEB-INF/classes/META-INF/persistence.xml
With the modified persistence.xml in the Step c above.
h4. e. Deploy form-builder and verify like we already did with designer
cp jbpm-human-task-war.war standalone/deployments/
# Start HUMAN_TASK_JBOSS again
bin/standalone.sh
h4. e. Verify Human-Task
h5. Verify that you have message like this
18:38:58,305 INFO [stdout] (MSC service thread 1-2) HornetQ Task service started correctly (update01) !
18:38:58,305 INFO [stdout] (MSC service thread 1-2) HornetQ Task service running (host 192.168.140.39 port 1234)...
18:38:58,318 INFO [stdout] (MSC service thread 1-2) -----------Version 5.3.0.Final_Update01-------------
18:38:58,318 INFO [stdout] (MSC service thread 1-2) Task service startup completed successfully (update01) !
I did make a change to Task Service that include "-----------Version 5.3.0.Final_Update01-------------" make sure that our updated version are running.
h5. And your check if you can telnet to HUMAN_TASK_IP:HORNETQ_PORT from CONSOLE_IP
https://community.jboss.org/servlet/JiveServlet/showImage/102-21179-11-19... https://community.jboss.org/servlet/JiveServlet/downloadImage/102-21179-1... Figure 06: Verify human-task does listen on HORNETQ_PORT and "Localhost only binding" issues is fixed.
telnet 192.168.140.39 1234
h2. 6. jBPM-Console deployment (with verify).
Login to server on CONSOLE_IP and place a copy of jbpm-install and start the installation:
h3. Step 6.1:Extract a clean copy of jboss-as-7.0.2.Final.zip to CONSOLE_JBOSS
# Set our CONSOLE_JBOSS to this example path
export CONSOLE_JBOSS=/opt/console_jboss
echo $CONSOLE_JBOSS
# Go to JBPM_INSTALL directory
cd /opt/download/
unzip jbpm-5.3.0.Final-installer-full.zip
cd /opt/download/jbpm-installer
# Extract a clean copy of jboss application server. To move to /opt we need root permission.
unzip lib/jboss-as-7.0.2.Final.zip
sudo mv jboss-as-7.0.2.Final $CONSOLE_JBOSS
# And jbpm transactin manager library
cp jbpm-tm.jar $CONSOLE_JBOSS/
# Demo user/role
cp auth/users.properties $CONSOLE_JBOSS/
cp auth/roles.properties $CONSOLE_JBOSS/
# jBpm persistence.xml
cp db/persistence.xml $CONSOLE_JBOSS/
cp db/ProcessInstanceInfo.hbm.xml $CONSOLE_JBOSS/
# MySQL module configuration
cp db/driver_jar_module.xml $CONSOLE_JBOSS/module.xml
cd $CONSOLE_JBOSS
# Example Evaluation process
cp -a sample $CONSOLE_JBOSS/
h3. Step 6.2 Add users/roles configuration to CONSOLE_JBOSS
cp users.properties standalone/configuration/
cp roles.properties standalone/configuration/
h3. Step 6.3: Copy your custom build jbpm-console
>From JBPM_SOURCE/jbpm-gwt/jbpm-gwt-console/target/jbpm-gwt-console-5.3.0.Final.war
To $CONSOLE_JBOSS/jbpm-gwt-console.war
And from JBPM_SOURCE/jbpm-gwt/jbpm-gwt-console-server/target/jbpm-gwt-console-server-5.3.0.Final.war
To $CONSOLE_JBOSS/jbpm-gwt-console-server.war
h3. Step 6.4: Jboss standalone.xml configuration
Change CONSOLE_JBOSS/standalone/configuration/standalone.xml as following
h4. a. Remove pojo and jpa modules
h5. Pojo extension
<extension module="org.jboss.as.osgi"/>
<!-- Remove this line extension module="org.jboss.as.pojo"/-->
<extension module="org.jboss.as.remoting"/>
h5. And pojo domain
<subsystem xmlns="urn:jboss:domain:naming:1.0" />
<!--subsystem xmlns="urn:jboss:domain:pojo:1.0" /-->
<subsystem xmlns="urn:jboss:domain:osgi:1.0" activation="lazy">
h5. Jpa extention
<extension module="org.jboss.as.jmx"/>
<!--extension module="org.jboss.as.jpa"/-->
<extension module="org.jboss.as.logging"/>
h5. And jpa domain
<!--subsystem xmlns=urn:jboss:domain:jpa:1.0>
<jpa default-datasource=""/>
</subsystem-->
h4. b. Change port for management interface (CONSOLE_MANAGEMENT_PORT)
<management-interfaces>
<native-interface interface="management" port="10199" />
<http-interface interface="management" port="10190"/>
</management-interfaces>
h4. c. Add datasource
<subsystem xmlns="urn:jboss:domain:datasources:1.0">
<datasources>
<datasource jndi-name="java:jboss/datasources/jbpmDS" pool-name="MysqlJbpmDSPool" enabled="true" jta="true" use-java-context="true" use-ccm="true">
<connection-url>
jdbc:mysql://192.168.140.39:3306/jbpm
</connection-url>
<driver>
mysql
</driver>
<pool>
<prefill>
false
</prefill>
<use-strict-min>
false
</use-strict-min>
<flush-strategy>
FailingConnectionOnly
</flush-strategy>
</pool>
<security>
<user-name>
jbpm
</user-name>
<password>
jbpmpassword
</password>
</security>
</datasource>
<drivers>
<driver name="mysql" module="com.mysql">
<xa-datasource-class>
com.mysql.jdbc.jdbc2.optional.MysqlXADataSource
</xa-datasource-class>
</driver>
</drivers>
</datasources>
</subsystem>
h4. d. Add security domain for jbpm-console
<subsystem xmlns="urn:jboss:domain:security:1.0">
<security-domains>
..
<security-domain name="jbpm-console" cache-type="default">
<authentication>
<login-module code="UsersRoles" flag="required">
<module-option name="usersProperties" value="${jboss.server.config.dir}/users.properties"/>
<module-option name="rolesProperties" value="${jboss.server.config.dir}/roles.properties"/>
</login-module>
</authentication>
</security-domain>
..
</security-domains>
</subsystem>
h4. e. Bind to CONSOLE_IP. For example
<interfaces>
<interface name="management">
<inet-address value="${jboss.bind.address.management:192.168.140.39}"/>
</interface>
<interface name="public">
<inet-address value="${jboss.bind.address:192.168.140.39}"/>
</interface>
</interfaces>
h4. f. Set offset-port
For our example to running on the same server as in https://community.jboss.org/docs/DOC-16705 https://community.jboss.org/wiki/MultipleInstancesOfJBossAS7OnTheSameMachine (Approach#1)
<socket-binding-group name="standard-sockets" default-interface="public" port-offset="200">
h3. Step 6.5: MySQL driver for jboss (identical with Step 5.4)
h4. a. Create MySQL module directory
mkdir modules/com/mysql
mkdir modules/com/mysql/main
h4. b.Copy module declaration file
cp module.xml modules/com/mysql/main/
h4. c. Download and install mysql driver to jBoss
wget https://repository.jboss.org/nexus/service/local/repositories/central/con...
cp mysql-connector-java-5.1.18.jar modules/com/mysql/main/mysql-connector-java.jar
h4. d. Start your CONSOLE_JBOSS now
bin/standalone.sh
To verify your configuration
* Does it start Ok?
* MySQL driver loaded?
* Can you see jbpmDS datasource on jBoss admin console at https://community.jboss.org/CONSOLE_IP:CONSOLE_MANAGEMENT_PORT http://CONSOLE_IP:CONSOLE_MANAGEMENT_PORT/ (In our example http://192.168.140.39:10190/ http://192.168.140.39:10190/)?
h3. Step 6.6: Gwt-console-server.war configuration
h4. a. Add users/roles to gwt-console-server.war/WEB-INF/classes/
Using your current Archive Manager to add users.properties and roles.properties to gwt-console-server.war/WEB-INF/classes/
h4. b. Configure persistence.xml
h5. Add mapping for ProcessInstanceInfo.hbm.xml
<mapping-file>META-INF/ProcessInstanceInfo.hbm.xml</mapping-file>
h5. Change to MySQL database
<property name="hibernate.dialect" value="org.hibernate.dialect.MySQLDialect"/>
h5. Mark Hibernate to show_sql
<property name="hibernate.show_sql" value="true" />
h5. Your persistence.xml will look something like this
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<persistence version="1.0"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence
http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd
http://java.sun.com/xml/ns/persistence/orm
http://java.sun.com/xml/ns/persistence/orm_1_0.xsd"
xmlns:orm="http://java.sun.com/xml/ns/persistence/orm"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/persistence">
<persistence-unit name="org.jbpm.persistence.jpa" transaction-type="JTA">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>java:jboss/datasources/jbpmDS</jta-data-source>
<mapping-file>META-INF/JBPMorm.xml</mapping-file>
<mapping-file>META-INF/ProcessInstanceInfo.hbm.xml</mapping-file>
<class>org.jbpm.persistence.processinstance.ProcessInstanceInfo</class>
<class>org.drools.persistence.info.SessionInfo</class>
<class>org.drools.persistence.info.WorkItemInfo</class>
<class>org.jbpm.process.audit.ProcessInstanceLog</class>
<class>org.jbpm.process.audit.NodeInstanceLog</class>
<class>org.jbpm.process.audit.VariableInstanceLog</class>
<properties>
<property name="hibernate.dialect" value="org.hibernate.dialect.MySQLDialect"/>
<property name="hibernate.max_fetch_depth" value="3"/>
<!-- hbm2ddl.auto MUST BE update! The console will otherwise overwrite the schema with each new thread -->
<property name="hibernate.hbm2ddl.auto" value="update" />
<property name="hibernate.show_sql" value="true" />
<!-- for AS7 -->
<property name="hibernate.transaction.manager_lookup_class" value="org.jbpm.integration.console.JBPMTransactionManager" />
<!-- for AS5 -->
<!-- <property name="hibernate.transaction.manager_lookup_class" value="org.hibernate.transaction.JBossTransactionManagerLookup" /> -->
</properties>
</persistence-unit>
</persistence>
h4. c. Add updated persistence.xml and ProcessInstanceInfo.hbm.xml to gwt-consoler-server.war
Using your current Archive Manager to add persistence.xml and ProcessInstanceInfo.hbm.xml to gwt-console-server.war/WEB-INF/classes/META-INF/
h4. d. Configure jbpm-console to binding on CONSOLE_IP and connect to remote GUVNOR_IP
As following article http://bpmgeek.com/blog/making-jbpm5-work-remote-host http://bpmgeek.com/blog/making-jbpm5-work-remote-host on Section# "A 404 error when you try and start a process". We need to make following changes to jbpm.console.properties file inside jbpm-gwt-core-5.1.0.Final.jar, that againt inside jbpm-gwt-console-server.war/WEB-INF/lib/ forlder
jbpm.console.server.host=CONSOLE_IP
jbpm.console.server.port=CONSOLE_HTTP_PORT
...
#configuration properties for task service
#jbpm.console.task.service.strategy=Mina|HornetQ|JMS|Local default to Mina
jbpm.console.task.service.strategy=HornetQ
jbpm.console.task.service.host=HUMAN_TASK_IP
jbpm.console.task.service.port=HORNETQ_PORT
jbpm.console.directory=CONSOLE_JBOSS/sample/evaluation/src/main/resources
guvnor.protocol=http
guvnor.host=GUVNOR_IP:GUVNOR_HTTP_PORT
guvnor.subdomain=drools-guvnor
...
In our example
jbpm.console.server.host=192.168.140.39
jbpm.console.server.port=8280
jbpm.console.server.context=gwt-console-server
#configuration properties for task service
#jbpm.console.task.service.strategy=Mina|HornetQ|JMS|Local default to Mina
jbpm.console.task.service.strategy=HornetQ
jbpm.console.task.service.host=192.168.140.39
jbpm.console.task.service.port=1234
jbpm.console.directory=/opt/console_jboss/sample/evaluation/src/main/resources
guvnor.protocol=http
guvnor.host=192.168.140.39:8180
guvnor.subdomain=drools-guvnor
...
h3. Step 6.7: Deployment
cp jbpm-gwt-console-server.war standalone/deployments/
cp jbpm-gwt-console.war standalone/deployments/
And verify that
* jbpm-gwt-console-server is deployed
* jbpm-gwt-console is deployed
* And use your browser to verify that http://CONSOLE_IP:8280/jbpm-console http://CONSOLE_IP:CONSOLE_HTTP_PORT/jbpm-console ( http://192.168.140.39:8280/jbpm-console http://192.168.140.39:8280/jbpm-console) works.
h2. 7. What's next?
h3. Upgrading to the Jboss-as-7.1.1.Final works
Following the same above steps with jboss-as-7.1.1.Final works. This make "interface" and "port-offset" configuration in standalone.xml more cleaner. In our current example setup, I just copy over {modified war files, users.properties, roles.properties, database module} to new JBoss and make the change in standalone.xml files.
This upgrading has a "Vfs" issue, but we can just ignore it. More here:
* https://community.jboss.org/message/753657#753657 https://community.jboss.org/message/753657#753657
* https://community.jboss.org/thread/197349?tstart=0 https://community.jboss.org/thread/197349?tstart=0
* https://community.jboss.org/thread/197080 https://community.jboss.org/thread/197080
h3. Using the Designer-2.3.0.Final works
Nothing to say about this upgrades.
h3. Jbpm-console source-code is a treasure for studying jBPM integration.
Just like jbpm-install/build.xml for study jBPM components in one way or another.
--------------------------------------------------------------
Comment by going to Community
[https://community.jboss.org/docs/DOC-21179]
Create a new document in jBPM at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=102&c...]
13 years, 7 months
- 1
- 0
[JBoss Web Services] - java.lang.Error: Undefined operation name <x>, when <x> was removed from interface (wsdl)
by Barry Schader
Barry Schader [https://community.jboss.org/people/barryaz1] created the discussion
"java.lang.Error: Undefined operation name <x>, when <x> was removed from interface (wsdl)"
To view the discussion, visit: https://community.jboss.org/message/742537#742537
--------------------------------------------------------------
What I did:
* Removed two completely unused methods from a class that represents a web service interface (we had a sloppy contractor who left his trash in the interface code...)
* Updated the WSDL file to remove the methods
* Committed those changes into our local SVN
* Ran a complete regression test (using Hudson, JUnit) -> PASSED
But when I attempt to run any of the *same JUnit tests* within the JBoss Dev Studio environment, I get a stack trace that begins with:
junit.framework.AssertionFailedError: Exception in constructor: testFetchProduct_PRE001_01 (java.lang.Error: Undefined operation name checkDMAS
at com.sun.xml.ws.model.JavaMethodImpl.freeze(JavaMethodImpl.java:305)
at com.sun.xml.ws.model.AbstractSEIModelImpl.freeze(AbstractSEIModelImpl.java:73)
at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:230)
at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:588)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:291)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:274)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:267)
at javax.xml.ws.Service.getPort(Service.java:92)
at com.medtronic.mes.FacadeService_Service.getFacadeServicePort(FacadeService_Service.java:50)
I seem to be unable to make eclipse (or JBDS?) *forget* about the "checkDMAS" method. There are no references to it anywhere that I can find within the JUnit code, yet *every* JUnit test case causes the same stack trace. I have 'cleaned' the project in every way that I know how -- but I will admit that my experience with eclipse (and JBDS) is weak.
Thanks in advance for any help you can provide.
Barry Schader
Phoenix, AZ
--------------------------------------------------------------
Reply to this message by going to Community
[https://community.jboss.org/message/742537#742537]
Start a new discussion in JBoss Web Services at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=1&con...]
13 years, 7 months
- 3
- 8
[JBoss Tools] - Matrix of supported platforms, runtimes and technologies in JBossTools/JBDS
by Nick Boldt
Nick Boldt [https://community.jboss.org/people/nickboldt] modified the document:
"Matrix of supported platforms, runtimes and technologies in JBossTools/JBDS"
To view the document, visit: https://community.jboss.org/docs/DOC-14297
--------------------------------------------------------------
h2. *This matrix is currently out of date, do not rely on it!*
The following matrix explains what versions of platforms, runtimes and technologies are supported by what versions of JBoss Tools/JBDS.
|| Eclipse || JBoss Tools || JBDS || EAP || AS || Seam || JSF || RichFaces (the latest supported version) || JDK(s) Supported by IDE *(not runtimes)* ||
| 4.2/Juno | 4.0.0 | 6.0 | ? | ? |
|
|
| Win7, WinXP & RHEL6: JDK 7 or 6
Others: JDK 6 only - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.7/Indigo | 3.3.0 | 5.0 | 4.3,5.0,6.0 | 7.0,6.0,5.1, 5.0, 4.2, 4.0, 3.2 |
|
|
| JDK 6 only - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.6/Helios | 3.2.0 | 4.0.0/4.1.0 | 4.3,5.0 | 6.0,5.1, 5.0, 4.2, 4.0, 3.2 |
|
|
| WinXP and RHEL5: JDK 6 or 5
Others: JDK5 - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.5/Galileo | 3.1.0 | 3.0.0 | 4.3, 5.0 | 5.1, 5.0, 4.2, 4.0, 3.2 | 2.2, 2.1, 2.0, 1.2 | 2.0 (in VPE), 1.2, 1.1 | 3.3.x | WinXP and RHEL5: JDK 6 or 5
Others: JDK5 - Details (http://www.eclipse.org/projects/project-plan.php?planurl=http://www.eclip...) |
| 3.4.2/Ganymede | 3.0.x | 2.1.0 | 4.3, 5.0 | 5.0, 4.2, 4.0, 3.2 | 2.2, 2.1, 2.0, 1.2 | 1.2, 1.1 | 3.3.1 | WinXP: JDK 6 or 5
Others: JDK 5 - Details (http://dev.eclipse.org/viewcvs/viewvc.cgi/www/eclipse/development/eclipse...) |
| 3.3.2/Europa | 2.1.2 | 1.1.0 | 4.3 | 5.0, 4.2, 4.0, 3.2 | 2.0, 1.2 | 1.2, 1.1 | 3.3.0 | JDK 5 - Details (http://dev.eclipse.org/viewcvs/viewvc.cgi/www/eclipse/development/eclipse...) |
| 3.3.1.1/Europa | 2.0.1 | 1.0.0 | 4.2 | 4.2, 4.0, 3.2 | 2.0, 1.2 | 1.2, 1.1 | 3.1.0 | JDK 5 - Details (http://dev.eclipse.org/viewcvs/viewvc.cgi/www/eclipse/development/eclipse...) |
--------------------------------------------------------------
Comment by going to Community
[https://community.jboss.org/docs/DOC-14297]
Create a new document in JBoss Tools at Community
[https://community.jboss.org/choose-container!input.jspa?contentType=102&c...]
13 years, 7 months
- 1
- 0