[jbosstools-commits] JBoss Tools SVN: r19336 - branches/jbosstools-3.1.0.RC1/smooks/docs/reference/en.

Author: ochikvina Date: 2009-12-16 10:17:59 -0500 (Wed, 16 Dec 2009) New Revision: 19336 Modified: branches/jbosstools-3.1.0.RC1/smooks/docs/reference/en/master_output.xml Log: https://jira.jboss.org/jira/browse/JBDS-989 - updating master_output.xml; Modified: branches/jbosstools-3.1.0.RC1/smooks/docs/reference/en/master_output.xml =================================================================== --- branches/jbosstools-3.1.0.RC1/smooks/docs/reference/en/master_output.xml 2009-12-16 15:16:48 UTC (rev 19335) +++ branches/jbosstools-3.1.0.RC1/smooks/docs/reference/en/master_output.xml 2009-12-16 15:17:59 UTC (rev 19336) @@ -8,907 +8,1125 @@ <!ENTITY smooksformeditor_graphicaltab SYSTEM "modules/smooksformeditor_graphicalpage.xml"> <!ENTITY smooksformeditor_configurationtab SYSTEM "modules/smooksformeditor_configurationpage.xml"> <!ENTITY smooksformeditor_sourcetab SYSTEM "modules/smooksformeditor_sourcepage.xml"> -]><book xmlns:diffmk="http://diffmk.sf.net/ns/diff"> - - <bookinfo> - - <title>Smooks Dev Tools Reference Guide</title> - <corpauthor> - <inlinemediaobject> - <imageobject role="fo"> - <imagedata fileref="images/jbosstools_logo.png" format="PNG"></imagedata> - </imageobject> - <imageobject role="html"> - <imagedata></imagedata> - </imageobject> - </inlinemediaobject> - </corpauthor> - <author> - <firstname>Xue(Dart)</firstname> - <surname>Peng</surname> - </author> - - <pubdate>November 2008</pubdate> - <copyright> - <year>2009</year> - <holder>JBoss by Red Hat</holder> - </copyright> - <releaseinfo><diffmk:wrapper diffmk:change="changed"> - Version: 1.1.0.M2 - </diffmk:wrapper></releaseinfo> - - <abstract> - <title></title> - <para> - <ulink url="http://download.jboss.org/jbosstools/nightly-docs/en/smooks/pdf... version</ulink> - </para> - </abstract> - - - </bookinfo> - <toc></toc> - -<chapter id="introduction" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/introduction.xml"> - <?dbhtml filename="introduction.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - </keywordset> - </chapterinfo> - <title>Introduction</title> - <para><diffmk:wrapper diffmk:change="changed">This chapter gives you a short introduction to Smooks, Smooks tools and its installation.</diffmk:wrapper></para> - <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">First, have a look at the key features of Smooks tools:</diffmk:wrapper></para> - <section diffmk:change="added"> - <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">Key Features of Smooks Tools</diffmk:wrapper></title> - <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Here, we provide you with a key functionality which is integrated in Smooks tools.</diffmk:wrapper></para> - <table diffmk:change="added"> - - <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">Key Functionality for Smooks Tools</diffmk:wrapper></title> - <tgroup cols="3" diffmk:change="added"> - - <colspec align="left" colnum="1" colwidth="2*" diffmk:change="added"></colspec> - <colspec colnum="2" colwidth="4*" diffmk:change="added"></colspec> - <colspec align="left" colnum="3" colwidth="2*" diffmk:change="added"></colspec> - - <thead diffmk:change="added"> - <row diffmk:change="added"> - <entry diffmk:change="added"><diffmk:wrapper diffmk:change="added">Feature</diffmk:wrapper></entry> - <entry diffmk:change="added"><diffmk:wrapper diffmk:change="added">Benefit</diffmk:wrapper></entry> - <entry diffmk:change="added"><diffmk:wrapper diffmk:change="added">Chapter</diffmk:wrapper></entry> - </row> - </thead> - - <tbody diffmk:change="added"> - - <row diffmk:change="added"> - <entry diffmk:change="added"><para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Smooks Configuration File Wizard</diffmk:wrapper></para></entry> - <entry diffmk:change="added"><para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Smooks tools allows to create/edit the Smooks configuration file for Java2Java data transformation.</diffmk:wrapper></para></entry> - <entry diffmk:change="added"> - <link diffmk:change="added" linkend="config_file_wizzard"><diffmk:wrapper diffmk:change="added">Smooks Configuration File Wizard</diffmk:wrapper></link> - </entry> - </row> - - <row diffmk:change="added"> - <entry diffmk:change="added"><para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Smooks Editor</diffmk:wrapper></para></entry> - <entry diffmk:change="added"><para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Smooks Editor helps configure the created Smooks configuration file.</diffmk:wrapper></para></entry> - <entry diffmk:change="added"> - <link diffmk:change="added" linkend="quickstart_formeditor"><diffmk:wrapper diffmk:change="added">Smooks Editor</diffmk:wrapper></link> - </entry> - </row> - - </tbody> - - </tgroup> - </table> - - - - </section> - - - - <section> - <title>What is Smooks?</title> - - <para><property moreinfo="none">Smooks</property> is a Java Framework/Engine for processing XML and non XML - data (CSV, EDI, Java, JSON etc).</para> - <para></para> - <para> - <orderedlist continuation="restarts" inheritnum="inherit" numeration="upperroman"> - <listitem> - <para><emphasis role="bold">Transformation</emphasis>: Perform a wide range of - Data Transforms. Supports many different Source and Result types - -XML/CSV/EDI/Java/JSON to XML/CSV/EDI/Java/JSON.</para> - </listitem> - <listitem> - <para><emphasis role="bold">Java Binding</emphasis>: Bind into a Java Object - Model from any data source (CSV, EDI, XML, Java, JSON etc). </para> - </listitem> - - <listitem> - <para><emphasis role="bold">Huge Message Processing</emphasis>: Process huge - messages (GBs) - Split, Transform and Route message fragments to JMS, File, - Database etc destinations. Route multiple message formats to multiple - destinations in a single pass over a message. </para> - </listitem> - - <listitem> - <para><emphasis role="bold">Message Enrichment</emphasis>: Enrich a message with - data from a Database, or other Datasources. </para> - </listitem> - - <listitem> - <para><emphasis role="bold">Combine</emphasis>: Combine the above features in - different ways e.g. add Message Enrichment as part of a Splitting and - Routing process. </para> - </listitem> - </orderedlist> - </para> - <figure float="0"> - <title>Smooks</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/introduction/introduction1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para> For More informations about <property moreinfo="none">Smooks</property>, please visit <ulink url="http://www.smooks.org">Smooks official site</ulink>.</para> - </section> - <section> - <title>What is Smooks Tools?</title> - - <para>Smooks tools is a set of graphical tools for editing Smooks configuration file - based on Eclipse.</para> - <figure float="0"> - <title>Smooks Form editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/introduction/introduction2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section> - <title>How to install Smooks dev tools?</title> - - <para> The Smooks tools was included by the <property moreinfo="none">JBoss Tools</property> since 3.0.0 - Beta1 version. You can download the <property moreinfo="none">JBoss Tools</property> from <ulink url="http://jboss.org/tools/download.html">JBoss download site</ulink>.</para> - <para> Smooks tools (<property moreinfo="none">JBoss Tools</property>) run with the latest Eclipse and - other required plug-ins (GEF, EMF, etc.).</para> - <para> You should download the latest IDE for Java EE developers from <ulink url="http://www.eclipse.org/downloads/"> Eclipse site</ulink>. It contains many plug-ins ( - GEF, EMF, etc. ) required by Smooks dev tools. </para> - - <para>Now let's progress to more advanced topics.</para> - </section> - -</chapter> - - -<chapter id="quickstart" role="updated" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/quick_start.xml" xreflabel="Quick Start"> - <?dbhtml filename="quick_start.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - <keyword>java</keyword> - </keywordset> - </chapterinfo> - <title>Quick Start</title> - <para> This "Quick Start" will show how to use the <property moreinfo="none">Smooks tools</property> to create/edit the Smooks - configuration file for Java2Java data transformation.</para> - <para> This chapter gives you a brief understanding of the <property moreinfo="none">Smooks tools</property>.</para> - <section> - <title>Download Smooks Java-to-Java Example</title> - <para> Visit <ulink url="http://svn.codehaus.org/milyn/tags/Smooks_V1.1.2/smooks-example... to download the "java-to-java" example project. </para> - <tip> - <title>Tip:</title> - - <para> The example project is based on Maven, we suggest you to create a new eclipse - Java project, copy the example code and .jar files from the example project and paste - them into the eclipse Java project. </para> - </tip> - </section> - <section id="config_file_wizzard"> - <title>Smooks Configuration File Wizard</title> - <para>Select the Smooks Java-to-Java example project that you created and right-click, - select the menu <emphasis><property moreinfo="none">New &gt; Other</property>,</emphasis> then find - <emphasis><property moreinfo="none">Smooks &gt; Smooks Configuration File</property>.</emphasis> - Click the <emphasis> - <property moreinfo="none">Next</property> - </emphasis> button. </para> - <figure float="0"> - <title>Selecting Smooks Configuration File Wizard</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>The first wizard page is a file path creation page. Select the <emphasis> - <property moreinfo="none">src</property> - </emphasis> folder to be the files container, and input the name - <emphasis><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">smooks-config.xml</diffmk:wrapper></property>.</emphasis> Click - <emphasis><property moreinfo="none">Next</property>.</emphasis></para> - <figure float="0"> - <title>Choosing the configuration file container and the file name</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="added">The second wizard page is a Smooks configuration file version choose page.Select appropriate one and click </diffmk:wrapper><emphasis><property moreinfo="none">Finish</property></emphasis><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> - <!--<para> As the quick start introduces how to create/edit the Java-to-Java Smooks - configuration file, let&apos;s select the<emphasis> - <property>Java-to-Java</property> - </emphasis> type as the source/target transform data type. </para> - - <figure> - <title>Selecting Data Type</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start3.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - - <para>On the next page you are prompted to choose the source data for transformation. - Let&apos;s select the <property>Order</property> class from the example project as - the source JavaBean class.</para> - - <figure> - <title>Selecting the Source Data</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start4.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - - <para>Then the wizard page asks you to choose the target data for transformation. We select - the <property>ListOrder</property> class as the target JavaBean class.</para> - <figure> - <title>Selecting the Target Data</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start5.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - - <para/> - - <tip> - <title>Tip:</title> - <para>You can omit two these steps and just press - <emphasis><property>Finish</property>.</emphasis> This will open the empty - Smooks Configuration file. It&apos;s possible to <link - linkend="graphicaleditor_datalink">select source/target data</link> afterwards - in the Smooks Graph editor.</para> - </tip>--> - </section> - <section id="quickstart_formeditor"> - <title>Smooks Editor</title> - - <para>When all the wizard steps are passed, a new Smooks Configuration file is created and - the <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Smooks Configuration Editor</diffmk:wrapper></property> will be opened automatically:</para> - <figure float="0"> - <title>Smooks Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start6.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <!--<para> This editor contains several parts: <table> - <title>The Smooks Editor Parts</title> - <tgroup cols="2"> - - <colspec colnum="1" align="left" colwidth="1*"/> - <colspec colnum="2" colwidth="5*"/> - - <thead> - <row> - <entry>Editor feature</entry> - <entry>Functionality</entry> - </row> - </thead> - - <tbody> - - <row> - <entry> - <para>Problems area</para> - </entry> - <entry> - <para>If there are any errors when you are editing the file, the - Problems area displays them</para> - </entry> - </row> - - <row> - <entry> - <para>Source data tree</para> - </entry> - <entry> - <para>The tree displays a structure of the transformed source - data</para> - </entry> - </row> - - <row> - <entry> - <para>Target data tree</para> - </entry> - <entry> - <para>The tree displays a structure of the transformed target - data</para> - </entry> - </row> - - <row> - <entry> - <para>Mapping graphical area</para> - </entry> - <entry> - <para>Show the data mapping connection lines</para> - </entry> - </row> - - <row> - <entry> - <para>Source/Target data selection links</para> - </entry> - <entry> - <para>Click the link, and <link linkend="graphicaleditor_datalink" - >Data Selection wizard</link> is opened helping you to - choose the source/target data</para> - </entry> - </row> - </tbody> - </tgroup> - </table> - </para>--> - </section> - - <section id="graphicaleditor_datalink"> - <title><diffmk:wrapper diffmk:change="changed">Choosing the transform data</diffmk:wrapper></title> - - <para><diffmk:wrapper diffmk:change="added">To choose the transform data you should click </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Add</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> button in the Input Data section.</diffmk:wrapper></para> - <para><diffmk:wrapper diffmk:change="changed">After clicking the button the </diffmk:wrapper><property moreinfo="none">Data Type Selection wizard</property><diffmk:wrapper diffmk:change="changed"> is - opened, and there are two data types in the list: Java and XML.</diffmk:wrapper></para> - <note> - <title>Note</title> - <para> There will become more and more data types on the list as the development goes on. - </para> - </note> - - <figure float="0"> - <title>Data Type Wizard</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start7.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>Select the <emphasis> - <property moreinfo="none">Java</property> - </emphasis> data type and click <emphasis><property moreinfo="none">Next</property>,</emphasis> you will - see the JavaBean class selection page:</para> - - <figure float="0"> - <title>JavaBean Data Selection</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start8.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para><diffmk:wrapper diffmk:change="changed"> Let's select the Order class from the example project as the source JavaBean class and the ListOrder class as the target JavaBean class.When you selected the necessary java classes, click </diffmk:wrapper><emphasis> - <property moreinfo="none">Finish</property> - </emphasis><diffmk:wrapper diffmk:change="changed"> and you should see all added java classes displayed in the Input Data Section - .</diffmk:wrapper></para> - <figure float="0"> - <title>Displaying the Structure of the Transformed Data</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start9.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - - <section id="quickstart_mapping"> - <title>Mapping</title> - - - <para><diffmk:wrapper diffmk:change="changed">How to map the java class just added?</diffmk:wrapper></para> - - <para>First, you should know what to transform:</para> - - <orderedlist continuation="restarts" inheritnum="inherit" numeration="loweralpha"> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"customerName"</property> - </emphasis> property of the <property moreinfo="none">Order#header</property> to the <emphasis> - <property moreinfo="none">"customerName"</property> - </emphasis> property of <property moreinfo="none">LineOrder</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"customerNumber"</property> - </emphasis> property of the <property moreinfo="none">Order#header</property> to the <emphasis> - <property moreinfo="none">"customerId"</property> - </emphasis> property of <property moreinfo="none">LineOrder</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"price"</property> - </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> - <property moreinfo="none">"unitPrice"</property> - </emphasis> property of <property moreinfo="none">LineItem</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"productId"</property> - </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> - <property moreinfo="none">"productCode"</property> - </emphasis> property of <property moreinfo="none">LineItem</property>.</para> - </listitem> - <listitem> - <para>Bind the <emphasis> - <property moreinfo="none">"quantity"</property> - </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> - <property moreinfo="none">"unitQuantity"</property> - </emphasis> property of <property moreinfo="none">LineItem</property>.</para> - </listitem> - </orderedlist> - - <para><diffmk:wrapper diffmk:change="added"> Make sense? - You should right click Resource List , select </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Add Smooks Resource&gt;Java Binding&gt;Bindings</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">. - </diffmk:wrapper></para> - <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">First of all, you should bind </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Order</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> to </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">LineOrder</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">. To do this one </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Bindings</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> Item should be added to the Resource List.</diffmk:wrapper></para> - <figure diffmk:change="added" float="0"> - <title><diffmk:wrapper diffmk:change="changed">Mapping</diffmk:wrapper></title> - <mediaobject diffmk:change="added"> - <imageobject diffmk:change="added"> - <imagedata fileref="images/quick_start/quick_start10.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure><para><diffmk:wrapper diffmk:change="changed">Click on it and you should see </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Bindings</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> Section to the right of </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Message Filtering Resources</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">.Write </diffmk:wrapper><emphasis diffmk:change="added"> <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">lineOrder</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> in the </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Bean id</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> field.</diffmk:wrapper></para> - <para><diffmk:wrapper diffmk:change="added">Select </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">example.trgmodel.LineOrder</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> in the </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Class</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> field and </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">example.srcmodel.Order</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> in the </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Name</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> field.Your </diffmk:wrapper><emphasis diffmk:change="added"> <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks Configuration Editor</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> should look like this: </diffmk:wrapper></para> - <figure float="0"> - <title><diffmk:wrapper diffmk:change="changed">Mapping</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start11.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para><diffmk:wrapper diffmk:change="added">Now you should bind two values </diffmk:wrapper><emphasis diffmk:change="added"> <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">"customerNumber"</diffmk:wrapper></property> - </emphasis><diffmk:wrapper diffmk:change="added"> property of the </diffmk:wrapper><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Order#header</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> to the </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">"customerId"</diffmk:wrapper></property> - </emphasis><diffmk:wrapper diffmk:change="added"> property of </diffmk:wrapper><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">LineOrder</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.To do this right click your just created </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Bindings Item &gt;Add Smooks Resource&gt;Value</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> - .</diffmk:wrapper></para> - - <figure float="0"> - <title><diffmk:wrapper diffmk:change="changed"> Mapping Editor</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start12.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure><note diffmk:change="added"> - <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">Note:</diffmk:wrapper></title> - <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">Please, remember that the root nodes of the source data and target data *MUST* be - connected.</diffmk:wrapper></para> - <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">This rule is not only for Java-to-Java, but also is relevant for - XML-to-Java </diffmk:wrapper></para> - </note> - <para><diffmk:wrapper diffmk:change="changed"> Do the same operation with the - other properties in this and other classes.</diffmk:wrapper></para> - <para><diffmk:wrapper diffmk:change="changed">It's also necessary to bind </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">orderItems</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> property of the </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Order</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> to </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">lineItems</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> property of </diffmk:wrapper><emphasis> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineOrder</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed">.The difference from the previous steps is that the </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">orderItems</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> is presented by the list of </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Order</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> and </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">lineItems</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> is the massive of </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">LineItem</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> .To do the binding,you should use </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Wiring Item</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">.First you should create a new Binding item. This is a configuration that allows you to construct an object graph .Select </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">example.trgmodel.LineItem[]</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> in the Class field and orderItems in the Name field,in bean Id write lineItems. - Your Smooks Configuration Editor should look like this: - </diffmk:wrapper></para> - <figure float="0"> - <title><diffmk:wrapper diffmk:change="changed"> Creating Wiring Item</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start13a.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="changed"> Then you should right click </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">lineOrder</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> binding item</diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">&gt;Add Smooks Resource&gt;Wiring</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed">.Select </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">lineItem</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> in </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Bean id Ref</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">. - </diffmk:wrapper></para> - <para><diffmk:wrapper diffmk:change="added">The final step is to add new Wiring item to lineOrder </diffmk:wrapper><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Binding</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">.In the </diffmk:wrapper><property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Bean id Ref</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> select </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">lineItems</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> and in </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Property</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> select </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">lineItems</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> -<!-- - <para>Next, you are going to bind the properties of the <property>OrderItem</property> to - the properties of the <property>LineItem</property>.</paa> - <para>Select the <emphasis> - <property>&quot;price&quot;</property> - </emphasis> and drag it onto the <emphasis> - <property>&quot;unitPrice&quot;</property> - </emphasis> of the other side tree viewer. The Problems area shows an - error:</para> - <figure> - <title>Connection Error 1</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start12.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - <para>How to deal with the error?</para> - <para>Please click the <emphasis> - <property>Fix it</property></emphasis> link, a menu is popped-up with several - resolve methods on it.</para> - <figure> - <title>Fixing the Connection Error</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start13.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - <para> Select the first resolve method: <emphasis> - 'Connect the &quot;OrderItem&quot; to the - &quot;LineItem&quot; '.</emphasis> As the result the <emphasis> - <property>&quot;OrderItem&quot;</property></emphasis> is connected with - the <emphasis> - <property>&quot;LineItem&quot;</property>.</emphasis></para> - <para>But the notify message area still shows some other errors:</para> - <figure> - <title>Connection Error 2</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start14.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - <para>OK, let&apos;s deal with the fire error. Click the <emphasis> - <property>Fix it</property></emphasis> link and - select the first resolve method. The <emphasis> - <property>&quot;orderItems&quot;</property></emphasis> is connected with - the <emphasis> - <property>&quot;lineItems&quot;</property>.</emphasis></para> - - <tip> - <title>Tip:</title> - <para> Why does the error occur?</para> - <para> You will find that, if you only connect the property node without connecting the - parent node of the property, the &quot;connection error&quot; occurs.</para> - <para>The connection of the &quot;price-to-unitPrice&quot; is the - &quot;Binding Connection&quot;, but it needs an &quot;Instance Creation - Connection&quot; - the connection of the - &quot;OrderItem-to-LineItem&quot;.</para> - </tip> - <para> After that, connect <emphasis> - <property>&quot;quantity&quot;</property></emphasis> to the <emphasis> - <property>&quot;unitQuantity&quot;</property></emphasis> and <emphasis> - <property>&quot;productId&quot;</property></emphasis> to the - <emphasis> - <property>&quot;productCode&quot;</property>:</emphasis></para> - <figure> - <title>Complete Mapping</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/quick_start/quick_start15.png" scale="90"/> - </imageobject> - </mediaobject> - </figure>--> - <para>Now, you should save the file and the <property moreinfo="none">Smooks tools</property> generate the correct - configuration file content.</para> - <para>OK, let run the test class: <property moreinfo="none">example.Main</property>. (Please, make sure that the Smooks engine - loads the correct configuration file).</para> - <para>Success!</para> - </section> -</chapter> - - <!--&smooksformeditor_graphicaltab;--> - -<chapter diffmk:change="added" id="smooksformeditor_configurationtab" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_configurationpage.xml" xreflabel="Smooks Configuration Editor Page"> - <?dbhtml filename="smooks_form_editor_configurationtab.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - </keywordset> - </chapterinfo> - <title><diffmk:wrapper diffmk:change="changed">Smooks Design Page</diffmk:wrapper></title> - <para><diffmk:wrapper diffmk:change="changed">In this section you will explore the details of Smooks Design Page usage.</diffmk:wrapper></para> - <para><property moreinfo="none"><diffmk:wrapper diffmk:change="added">Smooks Design Page</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> is one tab of the </diffmk:wrapper><property diffmk:change="added" moreinfo="none">Smooks Editor</property><diffmk:wrapper diffmk:change="changed">. </diffmk:wrapper></para> - <figure float="0"> - <title><diffmk:wrapper diffmk:change="changed">Design Page</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="added">This page consists of 3 sections: Message Filtering Resources, Input Data and the section devoted to the configurations of a selected in a Message Filtering Resources section Item.</diffmk:wrapper></para> - <para><diffmk:wrapper diffmk:change="added"> You can bind classes </diffmk:wrapper><link diffmk:change="added" linkend="quickstart_mapping"><diffmk:wrapper diffmk:change="added">using Bindings item - </diffmk:wrapper></link><diffmk:wrapper diffmk:change="added"> on the Design page of the </diffmk:wrapper><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Smooks Editor</diffmk:wrapper></property><diffmk:wrapper diffmk:change="changed">. </diffmk:wrapper></para> - <para><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Resource list</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> item in </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Message Filtering Resources</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> corresponds to the root element of the </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">smooks-config.xml</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> file.You can configurate the next four properties using corresponding fields:</diffmk:wrapper></para> - <itemizedlist diffmk:change="added"> - <listitem diffmk:change="added"><para><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">default-selector</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">:Defines the selector that will be applied to all resource-config elements in the </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">smooks-config.xml</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">, where a selector is not defined. </diffmk:wrapper></para></listitem> - <listitem diffmk:change="added"><para><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">default-selector-namespace</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">:Defines the default selector namespace. </diffmk:wrapper></para></listitem> - <listitem diffmk:change="added"><para><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">default-target-profile</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">: Defines the default target profile that will be applied to all resources in the smooks-config.xml. </diffmk:wrapper></para></listitem> - <listitem diffmk:change="added"><para><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">default-condition-ref</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">:The condition is applied to resources where an empty "condition" element (i.e. </diffmk:wrapper><code diffmk:change="added"><diffmk:wrapper diffmk:change="added">&lt;condition/&gt;</diffmk:wrapper></code><diffmk:wrapper diffmk:change="added">)is defined.The condition element does not reference a globally defined condition. </diffmk:wrapper></para></listitem> - </itemizedlist> - <para><diffmk:wrapper diffmk:change="added"> The configuration editor also edits the </diffmk:wrapper><link diffmk:change="added" linkend="configurationpage_parsetype"><diffmk:wrapper diffmk:change="added">Smooks parse - type</diffmk:wrapper></link><diffmk:wrapper diffmk:change="added"> and manages the </diffmk:wrapper><link diffmk:change="added" linkend="configurationpage_importfile"><diffmk:wrapper diffmk:change="added">Import - Files</diffmk:wrapper></link><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> - <section diffmk:change="added" id="selector-dialog"> - <title><diffmk:wrapper diffmk:change="changed">Selector generate dialog</diffmk:wrapper></title> - <para><diffmk:wrapper diffmk:change="added">Using </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Selector generate dialog</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> you can allow the user to select a node for generation </diffmk:wrapper><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">"selector"</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> for smooks-config file. - To open the dialog you should left click </diffmk:wrapper><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Browse</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added"> button in </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Default Selector</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> section. - </diffmk:wrapper></para> - <figure float="0"> - <title><diffmk:wrapper diffmk:change="changed">Selector generate dialog</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata diffmk:change="added" fileref="images/config_page/config_page2a.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="added"> When the dialog is opened you should click </diffmk:wrapper><property moreinfo="none"><diffmk:wrapper diffmk:change="changed">"Click to add input data"</diffmk:wrapper></property><diffmk:wrapper diffmk:change="added">to set the selector. - In the opened </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Data Type Selection</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> Wizard you should choose the type of the file and the file itself you want to load to the </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Selector generate dialog</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">.After that your dialog should look nearly like that:</diffmk:wrapper></para> - <figure diffmk:change="added" float="0"> - <title><diffmk:wrapper diffmk:change="changed">Selector generate dialog</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page2b.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="added">The final step is to choose the node you want to make a selector for </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">smooks-config.xml</diffmk:wrapper></property></emphasis>.</para> - </section> - <section id="configurationpage_parsetype"> - - <title>Smooks Parse Type</title> - <para><diffmk:wrapper diffmk:change="added">If your config file doesn't contain </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Global Parametres</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> item yet, you should add it by right click </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Resource List&gt;Add Smooks Resource&gt;Global Parametres</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">.After this step you should add </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Param</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> to just created </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Global Parametres</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">. </diffmk:wrapper></para> - <figure float="0"> - <title>Smooks Parse Types</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="added">Then left click </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Param</diffmk:wrapper></property> - </emphasis><diffmk:wrapper diffmk:change="added">and in the Param section, you will see a set of text fields: </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Name</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed">,</diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Type</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> and </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Text</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Name</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> value is required. To set a parse type you should write SAX/DOM to the - </diffmk:wrapper><emphasis diffmk:change="added"> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Text</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> field.</diffmk:wrapper></para> - - <figure float="0"> - <title><diffmk:wrapper diffmk:change="changed">Smooks Parse Types</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page3.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="changed">To apply changes to the </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">smooks-config.xml</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> click </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Save</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed"> button (</diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Ctrl+S</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="changed">). </diffmk:wrapper></para> - </section> - <section diffmk:change="added" id="configurationpage_importfile"> - - <title diffmk:change="added"><diffmk:wrapper diffmk:change="added">Import Data</diffmk:wrapper></title> - <para><diffmk:wrapper diffmk:change="changed"> Right click </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Resource List&gt;Add Smooks Resource&gt;Import Smooks Configuration</diffmk:wrapper></property> - </emphasis><diffmk:wrapper diffmk:change="added">, then you should see a new </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Import Smooks Configuration</diffmk:wrapper></property> - </emphasis><diffmk:wrapper diffmk:change="changed">item in the list (see the figure below).</diffmk:wrapper></para> - - <figure float="0"> - <title><diffmk:wrapper diffmk:change="changed">Import Data</diffmk:wrapper></title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page3a.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><diffmk:wrapper diffmk:change="changed">Left click the added item and to the left of </diffmk:wrapper><emphasis> - <property moreinfo="none"><diffmk:wrapper diffmk:change="changed">Message Filtering Resources Import Smooks Configuration </diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> section should appear. Click the </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Browse</diffmk:wrapper></property> - </emphasis><diffmk:wrapper diffmk:change="added"> button and select the file you want to import. </diffmk:wrapper></para> - <para><diffmk:wrapper diffmk:change="added">Click </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">Save</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> and the </diffmk:wrapper><code diffmk:change="added"><diffmk:wrapper diffmk:change="added">&lt;import&gt;</diffmk:wrapper></code><diffmk:wrapper diffmk:change="added"> tag with the corresponding file path as a </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">file</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added"> property will be added to the </diffmk:wrapper><emphasis diffmk:change="added"> - <property diffmk:change="added" moreinfo="none"><diffmk:wrapper diffmk:change="added">smooks-config.xml</diffmk:wrapper></property></emphasis><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> - </section> - <!--<section id="configurationpage_datedecoder"> - <title>Date Decoder Detail Page</title> - - <para>Date Decoder is a resourceConfig element in the Smooks configuration file. It - describes how to transform the &quot;Date&quot; type.</para> - <para> Click the <emphasis> - <property>New</property> - </emphasis> button to open the <property>New Resource Type wizard</property> - dialog.</para> - <figure> - <title>Resource Type Selection Wizard</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page4.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - - <para>There are several resource type on the list. Select the <emphasis> - <property>Date Decoder</property> - </emphasis> and click the <emphasis> - <property>Finish</property> - </emphasis> button, a new <emphasis> - <property>Date Decoder</property> - </emphasis> item was added and shown on the resource type list.</para> - <para> There are several parameters in the <emphasis> - <property>Date Decoder</property> - </emphasis> resourceConfig element:</para> - - <para> - - <itemizedlist> - <listitem> - <para>Format</para> - </listitem> - - <listitem> - <para>Locale-Language</para> - - </listitem> - - <listitem> - <para>Locale-Country</para> - - </listitem> - </itemizedlist> - </para> - - <para> You can modify the parameters of the <emphasis> - <property>Date Decoder</property></emphasis> item with the left detail page.</para> - - <figure> - <title>Date Decoder Detail Page</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/config_page/config_page1.png" scale="90"/> - </imageobject> - </mediaobject> - </figure> - - <para> When you defined a new <emphasis> - <property>Date Decoder</property></emphasis>, then you can use the <link - linkend="graphicalpage_propertiesview">JavaBean Properties</link> GUI to set - it to be the &quot;Java type&quot;.</para> - <para>Now when we've learnt Smooks Configuration Editor Page, let's have a look at one more Smooks Editor Page - Smooks Source Editor Page and investigate its functionality</para> - - - <para> The XML fragment generated by Smooks tools for the "Date - Decoder": </para> <para> <programlisting> <![CDATA[<resource-config - selector="decoder:DateLong"> - <resource>org.milyn.javabean.decoders.DateDecoder</resource> <param - name="locale-language">en</param> <param name="format">yyy-MM-dd - HH:mm:ss</param> <param name="locale-country">IE</param> - </resource-config>]]> </programlisting> </para> - - </section> - - <section id="configurationpage_documenttype"> <title>Document Type - Detail Page</title> <para> </para> </section> <section - id="configurationpage_unhandleresourceconfig"> <title>Unhandle - ResourceConfig</title> </section> - --> -</chapter> - - -<chapter id="smooksformeditor_sourcetab" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/smooks/docs/reference/en/modules/smooksformeditor_sourcepage.xml" xreflabel="Smooks Source Editor Page"> - <?dbhtml filename="smooks_form_editor_sourcetab.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Tools</keyword> - <keyword>Smooks</keyword> - <keyword>JBDS</keyword> - </keywordset> - </chapterinfo> - <title>Smooks Source Editor Page</title> - <para><diffmk:wrapper diffmk:change="changed">This section provides information about Smooks Source Editor Page.</diffmk:wrapper></para> - <section> - <title>XML Source Editor</title> - <para>You can use this editor to edit the Smooks Configuration file directly. </para> - <figure float="0"> - <title>Graphical Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/source_editor/source_editor1.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section> - <title>Error Messages GUI</title> - <para>If the <property moreinfo="none">Smooks tools</property> can't understand the configuration - file or the configuration file is illegal (XML structure isn't right for Smooks - Configuration file, etc.), the error is underlined.</para> - <figure float="0"> - <title>Graphical Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/source_editor/source_editor2.png" scale="90"></imagedata> - </imageobject> - </mediaobject> - </figure> - <!--note> - <title>Tip:</title> - <para> When the error message panel is displayed, other editors ( Graphical Editor, - Configuration Editor ) are disabled. </para> - <para> You can't edit the configuration file with other editors until file becomes - valid. </para> - </note--> - <para>We hope, our guide will help you to get started with JBoss Smooks Tools. Besides, for additional information you are welcome on <ulink url="http://www.jboss.com/index.html?module=bb&amp;op=viewforum&... forum</ulink>.</para> - </section> -</chapter> - -</book> +]><book xmlns:diffmk="http://diffmk.sf.net/ns/diff"> + + <bookinfo> + + <title>Smooks Dev Tools Reference Guide</title> + <corpauthor> + <inlinemediaobject> + <imageobject role="fo"> + <imagedata fileref="images/jbosstools_logo.png" format="PNG"></imagedata> + </imageobject> + <imageobject role="html"> + <imagedata></imagedata> + </imageobject> + </inlinemediaobject> + </corpauthor> + <author> + <firstname>Xue(Dart)</firstname> + <surname>Peng</surname> + </author> + + <pubdate>November 2008</pubdate> + <copyright> + <year>2009</year> + <holder>JBoss by Red Hat</holder> + </copyright> + <releaseinfo><diffmk:wrapper diffmk:change="changed"> + Version: 1.1.0.CR1 + </diffmk:wrapper></releaseinfo> + + <abstract> + <title></title> + <para> + <ulink url="http://download.jboss.org/jbosstools/nightly-docs/en/smooks/pdf... version</ulink> + </para> + </abstract> + + + </bookinfo> + <toc></toc> + +<chapter id="introduction" xml:base="file:///home/ochikvina/WORK/for_compare/jbosstools-3.1.0.CR1/smooks/docs/reference/en/modules/introduction.xml"> + <?dbhtml filename="introduction.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + </keywordset> + </chapterinfo> + <title>Introduction</title> + <para>This chapter gives you a short introduction to Smooks, Smooks tools and its installation.</para> + <para>First, have a look at the key features of Smooks tools:</para> + <section> + <title>Key Features of Smooks Tools</title> + <para>Here, we provide you with a key functionality which is integrated in Smooks tools.</para> + <table> + + <title>Key Functionality for Smooks Tools</title> + <tgroup cols="3"> + + <colspec align="left" colnum="1" colwidth="2*"></colspec> + <colspec colnum="2" colwidth="4*"></colspec> + <colspec align="left" colnum="3" colwidth="2*"></colspec> + + <thead> + <row> + <entry>Feature</entry> + <entry>Benefit</entry> + <entry>Chapter</entry> + </row> + </thead> + + <tbody> + + <row> + <entry><para>Smooks Configuration File Wizard</para></entry> + <entry><para>Smooks tools allows to create/edit the Smooks configuration file for Java2Java data transformation.</para></entry> + <entry> + <link linkend="config_file_wizzard">Smooks Configuration File Wizard</link> + </entry> + </row> + + <row> + <entry><para>Smooks Editor</para></entry> + <entry><para>Smooks Editor helps configure the created Smooks configuration file.</para></entry> + <entry> + <link linkend="quickstart_formeditor">Smooks Editor</link> + </entry> + </row> + + </tbody> + + </tgroup> + </table> + + + + </section> + + + + <section> + <title>What is Smooks?</title> + + <para><property moreinfo="none">Smooks</property> is a Java Framework/Engine for processing XML and non XML + data (CSV, EDI, Java, JSON etc).</para> + <para></para> + <para> + <orderedlist continuation="restarts" inheritnum="inherit" numeration="upperroman"> + <listitem> + <para><emphasis role="bold">Transformation</emphasis>: Perform a wide range of + Data Transforms. Supports many different Source and Result types + -XML/CSV/EDI/Java/JSON to XML/CSV/EDI/Java/JSON.</para> + </listitem> + <listitem> + <para><emphasis role="bold">Java Binding</emphasis>: Bind into a Java Object + Model from any data source (CSV, EDI, XML, Java, JSON etc). </para> + </listitem> + + <listitem> + <para><emphasis role="bold">Huge Message Processing</emphasis>: Process huge + messages (GBs) - Split, Transform and Route message fragments to JMS, File, + Database etc destinations. Route multiple message formats to multiple + destinations in a single pass over a message. </para> + </listitem> + + <listitem> + <para><emphasis role="bold">Message Enrichment</emphasis>: Enrich a message with + data from a Database, or other Datasources. </para> + </listitem> + + <listitem> + <para><emphasis role="bold">Combine</emphasis>: Combine the above features in + different ways e.g. add Message Enrichment as part of a Splitting and + Routing process. </para> + </listitem> + </orderedlist> + </para> + <figure float="0"> + <title>Smooks</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/introduction/introduction1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para> For More informations about <property moreinfo="none">Smooks</property>, please visit <ulink url="http://www.smooks.org">Smooks official site</ulink>.</para> + </section> + <section> + <title>What is Smooks Tools?</title> + + <para>Smooks tools is a set of graphical tools for editing Smooks configuration file + based on Eclipse.</para> + <figure float="0"> + <title>Smooks Form editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/introduction/introduction2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section> + <title>How to install Smooks dev tools?</title> + + <para> The Smooks tools was included by the <property moreinfo="none">JBoss Tools</property> since 3.0.0 + Beta1 version. You can download the <property moreinfo="none">JBoss Tools</property> from <ulink url="http://jboss.org/tools/download.html">JBoss download site</ulink>.</para> + <para> Smooks tools (<property moreinfo="none">JBoss Tools</property>) run with the latest Eclipse and + other required plug-ins (GEF, EMF, etc.).</para> + <para> You should download the latest IDE for Java EE developers from <ulink url="http://www.eclipse.org/downloads/"> Eclipse site</ulink>. It contains many plug-ins ( + GEF, EMF, etc. ) required by Smooks dev tools. </para> + + <para>Now let's progress to more advanced topics.</para> + </section> + +</chapter> + + +<chapter id="quickstart" role="updated" xml:base="file:///home/ochikvina/WORK/for_compare/jbosstools-3.1.0.CR1/smooks/docs/reference/en/modules/quick_start.xml" xreflabel="Quick Start"> + <?dbhtml filename="quick_start.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + <keyword>java</keyword> + </keywordset> + </chapterinfo> + <title>Quick Start</title> + <para> This "Quick Start" will show how to use the <property moreinfo="none">Smooks tools</property> to create/edit the Smooks + configuration file for Java2Java data transformation.</para> + <para> This chapter gives you a brief understanding of the <property moreinfo="none">Smooks tools</property>.</para> + <section> + <title>Download Smooks Java-to-Java Example</title> + <para> Visit <ulink url="http://www.blogjava.net/Files/reloadcn/smooks_java_java.zip&quo... examples page</ulink> to download the "java-to-java" example project. </para> + <tip> + <title>Tip:</title> + + <para> The example project is based on Maven, we suggest you to create a new eclipse + Java project, copy the example code and .jar files from the example project and paste + them into the eclipse Java project. </para> + </tip> + </section> + <section> + <title>Mapping rules</title> + <para>At the begining of working with Smooks tools, + we need to understand the Java-to-Java mapping rules of this example. + The transform input Java class is <emphasis><property moreinfo="none">example.sourcemodel.Order</property></emphasis> , its structure looks like this : + </para> + <figure float="0"> + <title>Order class</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/sourcemodel_structured.jpg"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Let's describe the structure of <emphasis><property moreinfo="none">example.sourcemodel.Order</property></emphasis> in short:</para> + <itemizedlist> + <listitem><para>Order class contains a <property moreinfo="none">Header</property> class and a <property moreinfo="none">List</property> class.</para></listitem> + <listitem><para>The <property moreinfo="none">Header</property> class has <property moreinfo="none">customerName</property>,<property moreinfo="none">customerNumber</property>,<property moreinfo="none">priority</property> as properties.</para></listitem> + <listitem><para>In Order class the objects of the OrderItem class are stored in the List.</para></listitem> + <listitem><para>OrderItem has <property moreinfo="none">price</property>,<property moreinfo="none">productId</property>,<property moreinfo="none">quantity</property> as its properties.</para></listitem> + </itemizedlist> + <para>Let's look at the transform target Java class : <emphasis><property moreinfo="none">LineOrder</property></emphasis>.</para> + <para>On the screen below you can see its structure:</para> + <figure float="0"> + <title>LineOrder class</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/targetmodel_structured.jpg"></imagedata> + </imageobject> + </mediaobject> + </figure> + <itemizedlist> + <listitem><para><property moreinfo="none">LineOrder</property> class contains 3 properties:<property moreinfo="none">customerId</property>,<property moreinfo="none">customerName</property>,<property moreinfo="none">priority</property> and an array of lineItems.</para></listitem> + <listitem><para>The <property moreinfo="none">Header</property> class has <property moreinfo="none">customerName</property>,<property moreinfo="none">customerNumber</property>,<property moreinfo="none">priority</property> as its properties.</para></listitem> + <listitem><para>OrderItem objects are stored in a List.</para></listitem> + </itemizedlist> + <para>Now it's the time to define the mapping rules to transform the input source java class to the target java class:</para> + <itemizedlist> + <listitem><para>Each instance of the Order class should be mapped with an instance of the LineOrder class.</para></listitem> + <listitem><para>The value of <property moreinfo="none">customerName</property> of the Header class should be assigned to the <property moreinfo="none">customerName</property> property of a LineOrder instance.</para></listitem> + <listitem><para>The value of <property moreinfo="none">customerNumber</property> of the Header class should be assigned to the <property moreinfo="none">customerId</property> property of a LineOrder instance.</para></listitem> + <listitem><para>The value of <property moreinfo="none">priority</property> of the Header class should be assigned to the <property moreinfo="none">priority</property> property of LineOrder instance.</para></listitem> + <listitem><para>For the <property moreinfo="none">orderitems</property> List of the Order instance, it's necessary to map a new lineItems array instance of LineOrder , + and each OrderItem instance in the orderItems List should be transformed to a LineItem instance, + those instances will be put into the lineItems array.</para></listitem> + <listitem><para>The value of <property moreinfo="none">productId</property> of the OrderItem instance should be assigned to the 'productCode' of LineItem.</para></listitem> + <listitem><para>The value of <property moreinfo="none">price</property> of OrderItem should be assigned to the <property moreinfo="none">unitPrice</property> of LineItem.</para></listitem> + + </itemizedlist> + </section> + + <section id="config_file_wizzard"> + <title>Smooks Configuration File Wizard</title> + <para>Select the Smooks Java-to-Java example project that you created and right-click, + select the menu <emphasis><property moreinfo="none">New &gt; Other</property>,</emphasis> then find + <emphasis><property moreinfo="none">Smooks &gt; Smooks Configuration File</property>.</emphasis> + Click the <emphasis> + <property moreinfo="none">Next</property> + </emphasis> button. </para> + <figure float="0"> + <title>Selecting Smooks Configuration File Wizard</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>The first wizard page is a file path creation page. Select the <emphasis> + <property moreinfo="none">src</property> + </emphasis> folder to be the files container, and input the name + <emphasis><property moreinfo="none">smooks-config.xml</property>.</emphasis> Click + <emphasis><property moreinfo="none">Next</property>.</emphasis></para> + <figure float="0"> + <title>Choosing the configuration file container and the file name</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><diffmk:wrapper diffmk:change="changed">The second wizard page is allows you to select Smooks configuration file version. Select the appropriate one and click </diffmk:wrapper><emphasis><property moreinfo="none">Finish</property></emphasis><diffmk:wrapper diffmk:change="changed"> to complete the wizard.</diffmk:wrapper></para> + + + + <!--<para> As the quick start introduces how to create/edit the Java-to-Java Smooks + configuration file, let&apos;s select the<emphasis> + <property>Java-to-Java</property> + </emphasis> type as the source/target transform data type. </para> + + <figure> + <title>Selecting Data Type</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start3.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + + <para>On the next page you are prompted to choose the source data for transformation. + Let&apos;s select the <property>Order</property> class from the example project as + the source JavaBean class.</para> + + <figure> + <title>Selecting the Source Data</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start4.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + + <para>Then the wizard page asks you to choose the target data for transformation. We select + the <property>ListOrder</property> class as the target JavaBean class.</para> + <figure> + <title>Selecting the Target Data</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start5.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + + <para/> + + <tip> + <title>Tip:</title> + <para>You can omit two these steps and just press + <emphasis><property>Finish</property>.</emphasis> This will open the empty + Smooks Configuration file. It&apos;s possible to <link + linkend="graphicaleditor_datalink">select source/target data</link> afterwards + in the Smooks Graph editor.</para> + </tip>--> + </section> + <section id="quickstart_formeditor"> + <title>Smooks Editor</title> + + <para>When all the wizard steps are passed, a new Smooks Configuration file is created and + the <property moreinfo="none">Smooks Configuration Editor</property> will be opened automatically:</para> + <figure float="0"> + <title>Smooks Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start6.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>On the bottom of this editor there are 5 tabs, they are : + + Overview, Reader, Message Filter, Graph, Source.</para> + <section id="graphicaleditor_datalink"> + <title>Adding the input data</title> + <para>At first, we need to add the Order class as the input data. + To do this, click the Reader tab, swich to the Reader/Input editor page</para> + + <!--<para> This editor contains several parts: <table> + <title>The Smooks Editor Parts</title> + <tgroup cols="2"> + + <colspec colnum="1" align="left" colwidth="1*"/> + <colspec colnum="2" colwidth="5*"/> + + <thead> + <row> + <entry>Editor feature</entry> + <entry>Functionality</entry> + </row> + </thead> + + <tbody> + + <row> + <entry> + <para>Problems area</para> + </entry> + <entry> + <para>If there are any errors when you are editing the file, the + Problems area displays them</para> + </entry> + </row> + + <row> + <entry> + <para>Source data tree</para> + </entry> + <entry> + <para>The tree displays a structure of the transformed source + data</para> + </entry> + </row> + + <row> + <entry> + <para>Target data tree</para> + </entry> + <entry> + <para>The tree displays a structure of the transformed target + data</para> + </entry> + </row> + + <row> + <entry> + <para>Mapping graphical area</para> + </entry> + <entry> + <para>Show the data mapping connection lines</para> + </entry> + </row> + + <row> + <entry> + <para>Source/Target data selection links</para> + </entry> + <entry> + <para>Click the link, and <link linkend="graphicaleditor_datalink" + >Data Selection wizard</link> is opened helping you to + choose the source/target data</para> + </entry> + </row> + </tbody> + </tgroup> + </table> + </para>--> + + + <para>To choose the transform data you should open <emphasis> + <property moreinfo="none">Reader</property></emphasis> tab and click <emphasis> + <property moreinfo="none">Add</property></emphasis> button in the Input Data section.</para> + <figure float="0"> + <title>Input Data section</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start_6a.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>After clicking the button the <property moreinfo="none">Data Type Selection wizard</property> is + opened, and there are many data types in the list: Java, XML etc.</para> + <note> + <title>Note</title> + <para> There will become more and more data types on the list as the development goes on. + </para> + </note> + + <figure float="0"> + <title>Data Type Wizard</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start7.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>Select the <emphasis> + <property moreinfo="none">Java</property> + </emphasis> data type and click <emphasis><property moreinfo="none">Next</property>,</emphasis> you will + see the JavaBean class selection page:</para> + + <figure float="0"> + <title>JavaBean Data Selection</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start8.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para> Let's select the Order class from the example project as the source JavaBean class.After that click <emphasis> + <property moreinfo="none">Finish</property> + </emphasis> and you should see the just added java class, being displayed in the Input Data Section. + </para> + <figure float="0"> + <title>Displaying the Structure of the Transformed Data</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start9.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section> + <title>Adding the target Bean</title> + <para>After adding the input data, let's switch to the Message Filter page:</para> + <figure float="0"> + <title>Displaying the Structure of the Transformed Data</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start9a.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Click the <property moreinfo="none">Add</property> button, the <property moreinfo="none">Add Child</property> wizard page will be shown, let's select the <property moreinfo="none">Java Binding v1.2 -&gt; Bean v1.2</property> and click <emphasis><property moreinfo="none">OK</property></emphasis> to add the Bean : + </para> + <figure float="0"> + <title>Add Child wizard</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start9b.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Then we can find on the Message Filter page the <property moreinfo="none">Bean v1.2</property> item added, click on it ,a Bean v1.2 section should appear to the right of the page. + The section represents a GUI for editing <property moreinfo="none">Bean v1.2</property> properties:</para> + <figure float="0"> + <title>Bean v1.2 section</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start9c.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>You should input <property moreinfo="none"> + lineOrder</property> as the Bean's id in the "Bean Id" field.Then you should click <property moreinfo="none">Browse</property> button + near the <property moreinfo="none">Class</property> textfield and select LineOrder as the Bean's class.</para> + <note> + <para> + When you enter a value for the <property moreinfo="none">Class</property> text field, + you can type 'Alt + /' and the content assist pop dialog will be shown, + so it's will increase the efficiency. If 'Alt + /' doesn't work, + try to use the 'Ctrl + space'('Key Assist' of Eclipse). + </para> + </note> + <para>Let's click the <property moreinfo="none">Add Binding</property> link at the bottom of this page, + it will show a dialog to ask the binding of what Bean properties you will prefer to add. + Select all and click OK, you will see a list of Binding elements added under the Bean item.</para> + <para>Then you should add an array of beans called <property moreinfo="none">lineItems</property> and a Bean LineItem.These two classes and Id values are:</para> + <para>Array Bean:</para> + <itemizedlist> + <listitem><para>BeanId : lineItems;</para></listitem> + <listitem><para>Class : example.trgmodel.LineItem[]</para></listitem> + </itemizedlist> + <para>LineItem Bean :</para> + <itemizedlist> + <listitem><para>BeanId : lineItem;</para></listitem> + <listitem><para>Class : example.trgmodel.LineItem</para></listitem> + </itemizedlist> + <note> + <para> + In Smooks , to be an array of Beans , the class value should end with '[]'. This means that this bean is an array type. + + </para> + </note> + <para>To finish this work, use the <property moreinfo="none">Add Binding</property> link to add all the bindings for the Bean.</para> + </section> + + + </section> + <section id="quickstart_mapping"> + <title>Mapping</title> + + + <para>How to map the java class just added?</para> + + <para>First, you should know what to transform:</para> + + <orderedlist continuation="restarts" inheritnum="inherit" numeration="loweralpha"> + <listitem> + <para>Bind the <emphasis> + <property moreinfo="none">"customerName"</property> + </emphasis> property of the <property moreinfo="none">Order#header</property> to the <emphasis> + <property moreinfo="none">"customerName"</property> + </emphasis> property of <property moreinfo="none">LineOrder</property>.</para> + </listitem> + <listitem> + <para>Bind the <emphasis> + <property moreinfo="none">"customerNumber"</property> + </emphasis> property of the <property moreinfo="none">Order#header</property> to the <emphasis> + <property moreinfo="none">"customerId"</property> + </emphasis> property of <property moreinfo="none">LineOrder</property>.</para> + </listitem> + <listitem> + <para>Bind the <emphasis> + <property moreinfo="none">"price"</property> + </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> + <property moreinfo="none">"unitPrice"</property> + </emphasis> property of <property moreinfo="none">LineItem</property>.</para> + </listitem> + <listitem> + <para>Bind the <emphasis> + <property moreinfo="none">"productId"</property> + </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> + <property moreinfo="none">"productCode"</property> + </emphasis> property of <property moreinfo="none">LineItem</property>.</para> + </listitem> + <listitem> + <para>Bind the <emphasis> + <property moreinfo="none">"quantity"</property> + </emphasis> property of the <property moreinfo="none">OrderItem</property> to the <emphasis> + <property moreinfo="none">"unitQuantity"</property> + </emphasis> property of <property moreinfo="none">LineItem</property>.</para> + </listitem> + </orderedlist> + + <para> Make sense? + You should open Design tab and click Add button. In opened Add Child Wizard,please, select <emphasis> + <property moreinfo="none">Add Smooks Resource&gt;Java Binding&gt;Bindings</property></emphasis>. + </para> + <para>First of all, you should bind <emphasis> + <property moreinfo="none">Order</property></emphasis> to <emphasis> + <property moreinfo="none">LineOrder</property></emphasis>. To do this one <emphasis> + <property moreinfo="none">Bindings</property></emphasis> Item should be added to the Resource List.</para> + <figure float="0"> + <title>Mapping</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start10.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure><para>Click on it and you should see <emphasis> + <property moreinfo="none">Bindings</property></emphasis> Section to the right of <emphasis> + <property moreinfo="none">Message Filtering Resources</property></emphasis>.Write <emphasis> <property moreinfo="none">lineOrder</property></emphasis> in the <emphasis> + <property moreinfo="none">Bean id</property></emphasis> field.</para> + <para>Select <emphasis> + <property moreinfo="none">example.trgmodel.LineOrder</property></emphasis> in the <emphasis> + <property moreinfo="none">Class</property></emphasis> field and <emphasis> + <property moreinfo="none">example.srcmodel.Order</property></emphasis> in the <emphasis> + <property moreinfo="none">Name</property></emphasis> field.Your <emphasis> <property moreinfo="none">Smooks Configuration Editor</property></emphasis> should look like this: </para> + <figure float="0"> + <title>Mapping</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start11.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>Now you should bind two values <emphasis> <property moreinfo="none">"customerNumber"</property> + </emphasis> property of the <property moreinfo="none">Order#header</property> to the <emphasis> + <property moreinfo="none">"customerId"</property> + </emphasis> property of <property moreinfo="none">LineOrder</property>.To do this right click your just created <emphasis> + <property moreinfo="none">Bindings Item &gt;Add Smooks Resource&gt;Value</property></emphasis> + .</para> + + <figure float="0"> + <title> Mapping Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start12.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure><note> + <title>Note:</title> + <para>Please, remember that the root nodes of the source data and target data *MUST* be + connected.</para> + <para>This rule is not only for Java-to-Java, but also is relevant for + XML-to-Java </para> + </note> + <para> Do the same operation with the + other properties in this and other classes.</para> + <para>It's also necessary to bind <emphasis> + <property moreinfo="none">orderItems</property></emphasis> property of the <emphasis> + <property moreinfo="none">Order</property></emphasis> to <emphasis> + <property moreinfo="none">lineItems</property></emphasis> property of <emphasis> + <property moreinfo="none">LineOrder</property></emphasis>.The difference from the previous steps is that the <emphasis> + <property moreinfo="none">orderItems</property></emphasis> is presented by the list of <emphasis> + <property moreinfo="none">Order</property></emphasis> and <emphasis> + <property moreinfo="none">lineItems</property></emphasis> is the massive of <emphasis> + <property moreinfo="none">LineItem</property></emphasis> .To do the binding,you should use <emphasis> + <property moreinfo="none">Wiring Item</property></emphasis>.First you should create a new Binding item. This is a configuration that allows you to construct an object graph .Select <emphasis> + <property moreinfo="none">example.trgmodel.LineItem[]</property></emphasis> in the Class field and orderItems in the Name field,in bean Id write lineItems. + Your Smooks Configuration Editor should look like this: + </para> + <figure float="0"> + <title> Creating Wiring Item</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start13a.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para> Then you should right click <emphasis> + <property moreinfo="none">lineOrder</property></emphasis> binding item<emphasis> + <property moreinfo="none">&gt;Add Smooks Resource&gt;Wiring</property></emphasis>.Select <emphasis> + <property moreinfo="none">lineItem</property></emphasis> in <emphasis> + <property moreinfo="none">Bean id Ref</property></emphasis>. + </para> + <para>The final step is to add new Wiring item to lineOrder <property moreinfo="none">Binding</property>.In the <property moreinfo="none">Bean id Ref</property> select <emphasis> + <property moreinfo="none">lineItems</property></emphasis> and in <emphasis> + <property moreinfo="none">Property</property></emphasis> select <emphasis> + <property moreinfo="none">lineItems</property></emphasis>.</para> +<!-- + <para>Next, you are going to bind the properties of the <property>OrderItem</property> to + the properties of the <property>LineItem</property>.</paa> + <para>Select the <emphasis> + <property>&quot;price&quot;</property> + </emphasis> and drag it onto the <emphasis> + <property>&quot;unitPrice&quot;</property> + </emphasis> of the other side tree viewer. The Problems area shows an + error:</para> + <figure> + <title>Connection Error 1</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start12.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + <para>How to deal with the error?</para> + <para>Please click the <emphasis> + <property>Fix it</property></emphasis> link, a menu is popped-up with several + resolve methods on it.</para> + <figure> + <title>Fixing the Connection Error</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start13.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + <para> Select the first resolve method: <emphasis> + 'Connect the &quot;OrderItem&quot; to the + &quot;LineItem&quot; '.</emphasis> As the result the <emphasis> + <property>&quot;OrderItem&quot;</property></emphasis> is connected with + the <emphasis> + <property>&quot;LineItem&quot;</property>.</emphasis></para> + <para>But the notify message area still shows some other errors:</para> + <figure> + <title>Connection Error 2</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start14.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + <para>OK, let&apos;s deal with the fire error. Click the <emphasis> + <property>Fix it</property></emphasis> link and + select the first resolve method. The <emphasis> + <property>&quot;orderItems&quot;</property></emphasis> is connected with + the <emphasis> + <property>&quot;lineItems&quot;</property>.</emphasis></para> + + <tip> + <title>Tip:</title> + <para> Why does the error occur?</para> + <para> You will find that, if you only connect the property node without connecting the + parent node of the property, the &quot;connection error&quot; occurs.</para> + <para>The connection of the &quot;price-to-unitPrice&quot; is the + &quot;Binding Connection&quot;, but it needs an &quot;Instance Creation + Connection&quot; - the connection of the + &quot;OrderItem-to-LineItem&quot;.</para> + </tip> + <para> After that, connect <emphasis> + <property>&quot;quantity&quot;</property></emphasis> to the <emphasis> + <property>&quot;unitQuantity&quot;</property></emphasis> and <emphasis> + <property>&quot;productId&quot;</property></emphasis> to the + <emphasis> + <property>&quot;productCode&quot;</property>:</emphasis></para> + <figure> + <title>Complete Mapping</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/quick_start/quick_start15.png" scale="90"/> + </imageobject> + </mediaobject> + </figure>--> + <para>Now, you should save the file and the <property moreinfo="none">Smooks tools</property> generate the correct + configuration file content.</para> + <para>OK, let run the test class: <property moreinfo="none">example.Main</property>. (Please, make sure that the Smooks engine + loads the correct configuration file).</para> + <para>Success!</para> + </section> +</chapter> + + <!--&smooksformeditor_graphicaltab;--> + +<chapter id="smooksformeditor_configurationtab" xml:base="file:///home/ochikvina/WORK/for_compare/jbosstools-3.1.0.CR1/smooks/docs/reference/en/modules/smooksformeditor_configurationpage.xml" xreflabel="Smooks Configuration Editor Page"> + <?dbhtml filename="smooks_form_editor_configurationtab.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + </keywordset> + </chapterinfo> + <title>Smooks Design Page</title> + <para>In this section you will explore the details of Smooks Design Page usage.</para> + <para><property moreinfo="none">Smooks Design Page</property> is one tab of the <property moreinfo="none">Smooks Editor</property>. </para> + <figure float="0"> + <title>Design Page</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>This page consists of 3 sections: Message Filtering Resources, Input Data and the section devoted to the configurations of a selected in a Message Filtering Resources section Item.</para> + <para> You can bind classes <link linkend="quickstart_mapping">using Bindings item + </link> on the Design page of the <property moreinfo="none">Smooks Editor</property>. </para> + <para><emphasis> + <property moreinfo="none">Resource list</property></emphasis> item in <emphasis> + <property moreinfo="none">Message Filtering Resources</property></emphasis> corresponds to the root element of the <emphasis> + <property moreinfo="none">smooks-config.xml</property></emphasis> file.You can configurate the next four properties using corresponding fields:</para> + <itemizedlist> + <listitem><para><emphasis> + <property moreinfo="none">default-selector</property></emphasis>:Defines the selector that will be applied to all resource-config elements in the <emphasis> + <property moreinfo="none">smooks-config.xml</property></emphasis>, where a selector is not defined. </para></listitem> + <listitem><para><emphasis> + <property moreinfo="none">default-selector-namespace</property></emphasis>:Defines the default selector namespace. </para></listitem> + <listitem><para><emphasis> + <property moreinfo="none">default-target-profile</property></emphasis>: Defines the default target profile that will be applied to all resources in the smooks-config.xml. </para></listitem> + <listitem><para><emphasis> + <property moreinfo="none">default-condition-ref</property></emphasis>:The condition is applied to resources where an empty "condition" element (i.e. <code>&lt;condition/&gt;</code>)is defined.The condition element does not reference a globally defined condition. </para></listitem> + </itemizedlist> + <para> The configuration editor also edits the <link linkend="configurationpage_parsetype">Smooks parse + type</link> and manages the <link linkend="configurationpage_importfile">Import + Files</link>.</para> + <section id="selector-dialog"> + <title>Selector generate dialog</title> + <para>Using <emphasis> + <property moreinfo="none">Selector generate dialog</property></emphasis> you can allow the user to select a node for generation <property moreinfo="none">"selector"</property> for smooks-config file. + To open the dialog you should left click <property moreinfo="none">Browse</property> button in <emphasis> + <property moreinfo="none">Default Selector</property></emphasis> section. + </para> + <figure float="0"> + <title>Selector generate dialog</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page2a.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para> When the dialog is opened you should click <property moreinfo="none">"Click to add input data"</property>to set the selector. + In the opened <emphasis> + <property moreinfo="none">Data Type Selection</property></emphasis> Wizard you should choose the type of the file and the file itself you want to load to the <emphasis> + <property moreinfo="none">Selector generate dialog</property></emphasis>.After that your dialog should look nearly like that:</para> + <figure float="0"> + <title>Selector generate dialog after adding Input Data</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page2b.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>The final step is to choose the node you want to make a selector for <emphasis> + <property moreinfo="none">smooks-config.xml</property></emphasis>.</para> + </section> + <section id="configurationpage_parsetype"> + + <title>Smooks Parse Type</title> + <para>If your config file doesn't contain <emphasis> + <property moreinfo="none">Global Parametres</property></emphasis> item yet, you should add it by right click <emphasis> + <property moreinfo="none">Resource List&gt;Add Smooks Resource&gt;Global Parametres</property></emphasis>.After this step you should add <emphasis> + <property moreinfo="none">Param</property></emphasis> to just created <emphasis> + <property moreinfo="none">Global Parametres</property></emphasis>. </para> + <figure float="0"> + <title>Adding Param to created Global Parametres</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Then left click <emphasis> + <property moreinfo="none">Param</property> + </emphasis>and in the Param section, you will see a set of text fields: <emphasis> + <property moreinfo="none">Name</property></emphasis>,<emphasis> + <property moreinfo="none">Type</property></emphasis> and <emphasis> + <property moreinfo="none">Text</property></emphasis>.<emphasis> + <property moreinfo="none">Name</property></emphasis> value is required. To set a parse type you should write SAX/DOM to the + <emphasis> + <property moreinfo="none">Text</property></emphasis> field.</para> + + <figure float="0"> + <title>Filling Param section field Name and Text Value for set a Parse Type</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page3.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>To apply changes to the <emphasis> + <property moreinfo="none">smooks-config.xml</property></emphasis> click <emphasis> + <property moreinfo="none">Save</property></emphasis> button (<emphasis> + <property moreinfo="none">Ctrl+S</property></emphasis>). </para> + </section> + <section id="configurationpage_importfile"> + + <title>Import Smooks Configuration page</title> + <para> Right click <emphasis> + <property moreinfo="none">Resource List&gt;Add Smooks Resource&gt;Import Smooks Configuration</property> + </emphasis>, then you should see a new <emphasis> + <property moreinfo="none">Import Smooks Configuration</property> + </emphasis>item in the list (see the figure below).</para> + + <figure float="0"> + <title>Import Data</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page3a.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Left click the added item and to the left of <emphasis> + <property moreinfo="none">Message Filtering Resources Import Smooks Configuration </property></emphasis> section should appear. Click the <emphasis> + <property moreinfo="none">Browse</property> + </emphasis> button and select the file you want to import(see <link linkend="file_selection">File selection</link> section). </para> + <para>Click <emphasis> + <property moreinfo="none">Save</property></emphasis> and the <code>&lt;import&gt;</code> tag with the corresponding file path as a <emphasis> + <property moreinfo="none">file</property></emphasis> property will be added to the <emphasis> + <property moreinfo="none">smooks-config.xml</property></emphasis>.</para> + </section> + <section id="file_selection"> + <title>File selection</title> + <para>Some attributes in Smooks elements should store path to a file as a value + (e.g. attribute <emphasis><property moreinfo="none">"mappingModel"</property></emphasis> of the element <emphasis><property moreinfo="none">"edi:reader"</property></emphasis>). + You can see a Browse button near the fields, that set such a value to the attribute + (e.g. <emphasis><property moreinfo="none">"Mapping Model"</property></emphasis> field set a value to the <emphasis><property moreinfo="none">"mappingModel"</property></emphasis> attribute). + </para> + <figure float="0"> + <title>EDI:Reader element</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page6.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para> + When you click <emphasis><property moreinfo="none">Browse</property></emphasis>, the dialog prompts you click one of two buttons: + <emphasis><property moreinfo="none">Browse File System</property></emphasis> and <emphasis><property moreinfo="none">Browse WorkSpace</property></emphasis>. + </para> + <figure float="0"> + <title>Browse dialog</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page7.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Using the buttons you can locate the file you need. If you click <emphasis> + <property moreinfo="none">Browse File System</property></emphasis> button you specify the path of, or browse to, a file system directory. + </para> + <figure float="0"> + <title>Browse file system</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page8.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para> + If you click <emphasis><property moreinfo="none">Browse WorkSpace</property></emphasis> button, you specify the path of, or browse to, a workspace relative working directory. + </para> + <figure float="0"> + <title>Browse Workspace</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page9.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <!--<section id="configurationpage_datedecoder"> + <title>Date Decoder Detail Page</title> + + <para>Date Decoder is a resourceConfig element in the Smooks configuration file. It + describes how to transform the &quot;Date&quot; type.</para> + <para> Click the <emphasis> + <property>New</property> + </emphasis> button to open the <property>New Resource Type wizard</property> + dialog.</para> + <figure> + <title>Resource Type Selection Wizard</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page4.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + + <para>There are several resource type on the list. Select the <emphasis> + <property>Date Decoder</property> + </emphasis> and click the <emphasis> + <property>Finish</property> + </emphasis> button, a new <emphasis> + <property>Date Decoder</property> + </emphasis> item was added and shown on the resource type list.</para> + <para> There are several parameters in the <emphasis> + <property>Date Decoder</property> + </emphasis> resourceConfig element:</para> + + <para> + + <itemizedlist> + <listitem> + <para>Format</para> + </listitem> + + <listitem> + <para>Locale-Language</para> + + </listitem> + + <listitem> + <para>Locale-Country</para> + + </listitem> + </itemizedlist> + </para> + + <para> You can modify the parameters of the <emphasis> + <property>Date Decoder</property></emphasis> item with the left detail page.</para> + + <figure> + <title>Date Decoder Detail Page</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/config_page/config_page1.png" scale="90"/> + </imageobject> + </mediaobject> + </figure> + + <para> When you defined a new <emphasis> + <property>Date Decoder</property></emphasis>, then you can use the <link + linkend="graphicalpage_propertiesview">JavaBean Properties</link> GUI to set + it to be the &quot;Java type&quot;.</para> + <para>Now when we've learnt Smooks Configuration Editor Page, let's have a look at one more Smooks Editor Page - Smooks Source Editor Page and investigate its functionality</para> + + + <para> The XML fragment generated by Smooks tools for the "Date + Decoder": </para> <para> <programlisting> <![CDATA[<resource-config + selector="decoder:DateLong"> + <resource>org.milyn.javabean.decoders.DateDecoder</resource> <param + name="locale-language">en</param> <param name="format">yyy-MM-dd + HH:mm:ss</param> <param name="locale-country">IE</param> + </resource-config>]]> </programlisting> </para> + + </section> + + <section id="configurationpage_documenttype"> <title>Document Type + Detail Page</title> <para> </para> </section> <section + id="configurationpage_unhandleresourceconfig"> <title>Unhandle + ResourceConfig</title> </section> + --> +</chapter> + + +<chapter id="smooksformeditor_sourcetab" xml:base="file:///home/ochikvina/WORK/for_compare/jbosstools-3.1.0.CR1/smooks/docs/reference/en/modules/smooksformeditor_sourcepage.xml" xreflabel="Smooks Source Editor Page"> + <?dbhtml filename="smooks_form_editor_sourcetab.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Tools</keyword> + <keyword>Smooks</keyword> + <keyword>JBDS</keyword> + </keywordset> + </chapterinfo> + <title>Smooks Source Editor Page</title> + <para>This section provides information about Smooks Source Editor Page.</para> + <section> + <title>XML Source Editor</title> + <para>You can use this editor to edit the Smooks Configuration file directly. </para> + <figure float="0"> + <title>Graphical Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/source_editor/source_editor1.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section> + <title>Error underlining in Graphical Editor</title> + <para>If the <property moreinfo="none">Smooks tools</property> can't understand the configuration + file or the configuration file is illegal (XML structure isn't right for Smooks + Configuration file, etc.), the error is underlined.</para> + <figure float="0"> + <title>Graphical Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/source_editor/source_editor2.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + <!--note> + <title>Tip:</title> + <para> When the error message panel is displayed, other editors ( Graphical Editor, + Configuration Editor ) are disabled. </para> + <para> You can't edit the configuration file with other editors until file becomes + valid. </para> + </note--> + + + + </section> + + <section> + <title>Smooks Configuration File Validator</title> + <para>Smooks configuration file validator will validate your Smooks configuration file. Just right-click on the file and then click on the <property moreinfo="none">Validate</property> button. The validator can be enabled/disabled in <emphasis><property moreinfo="none">Window -&gt; Preferences -&gt; Validation</property></emphasis>:</para> + + <figure float="0"> + <title>Validation: Smooks Configuration File Validator</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/source_editor/smooks_conf_validator.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>You can set up your Smooks validator to include, exclude groups to validate and specify rules for validation. Just click on the <property moreinfo="none">Settings</property> button and use the options provided:</para> + + <figure float="0"> + <title>Smooks Configuration File Validator Settings</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/source_editor/smooks_conf_validator_settings.png" scale="90"></imagedata> + </imageobject> + </mediaobject> + </figure> + + + <para>We hope, our guide will help you to get started with JBoss Smooks Tools. Besides, for additional information you are welcome on <ulink url="http://www.jboss.com/index.html?module=bb&amp;op=viewforum&... forum</ulink>.</para> + + </section> + + + + +</chapter> + +</book>