[jbosstools-commits] JBoss Tools SVN: r11327 - trunk/jbpm/docs/reference/en/modules.

Author: ochikvina Date: 2008-10-30 05:45:29 -0400 (Thu, 30 Oct 2008) New Revision: 11327 Modified: trunk/jbpm/docs/reference/en/modules/Quick_Howto_Guide.xml trunk/jbpm/docs/reference/en/modules/guided_tour_jboss_jbpmgpd.xml trunk/jbpm/docs/reference/en/modules/the_views.xml Log: https://jira.jboss.org/jira/browse/JBDS-463 - correcting validation errors; Modified: trunk/jbpm/docs/reference/en/modules/Quick_Howto_Guide.xml =================================================================== --- trunk/jbpm/docs/reference/en/modules/Quick_Howto_Guide.xml 2008-10-30 09:45:10 UTC (rev 11326) +++ trunk/jbpm/docs/reference/en/modules/Quick_Howto_Guide.xml 2008-10-30 09:45:29 UTC (rev 11327) @@ -42,7 +42,7 @@ </figure> </section> - <section revisionflag="added"> + <section> <title>Configuring Task Nodes</title> <para>Here, we&apos;ll examine how you can configure the Task nodes in jBPM jPDL GPD.</para> @@ -168,10 +168,8 @@ </imageobject> </mediaobject> </figure> - + <para>We hope, our guide will help you to get started with the jPDL process language and jBPM + workflow on the whole. Besides, for additional information you are welcome on <ulink + url="http://www.jboss.com/index.html?module=bb&amp;op=viewforum&... forum</ulink>.</para> </section> - - <para>We hope, our guide will help you to get started with the jPDL process language and jBPM - workflow on the whole. Besides, for additional information you are welcome on <ulink - url="http://www.jboss.com/index.html?module=bb&amp;op=viewforum&... forum</ulink>.</para> </chapter> Modified: trunk/jbpm/docs/reference/en/modules/guided_tour_jboss_jbpmgpd.xml =================================================================== --- trunk/jbpm/docs/reference/en/modules/guided_tour_jboss_jbpmgpd.xml 2008-10-30 09:45:10 UTC (rev 11326) +++ trunk/jbpm/docs/reference/en/modules/guided_tour_jboss_jbpmgpd.xml 2008-10-30 09:45:29 UTC (rev 11327) @@ -1,220 +1,221 @@ <?xml version="1.0" encoding="UTF-8"?> -<chapter id="GuidedTourJBossjBPMGPD" xreflabel="GuidedTourJBossjBPMGPD"> - <?dbhtml filename="GuidedTourJBossjBPMGPD.html"?> - <chapterinfo> - <keywordset> - <keyword>jBPM</keyword> - <keyword>JBoss</keyword> - <keyword>Process</keyword> - <keyword>Definition</keyword> - </keywordset> - </chapterinfo> - <title>A Guided Tour of JBoss jBPM GPD</title> - <para>In this chapter we suggest a step-by-step walk-through of creating and configuring your - own simple process. Let's try to organize a new jBPM project.</para> - <para>A wizard for creating a jBPM project is included in the GPD plugin. We have opted to - create a project based on a template already containing a number of advanced artifacts that - we will ignore for this section. In the future we will elaborate this wizard and offer the - possibility to create an empty jBPM project as well as projects based on templates taken - from the jBPM tutorial.</para> - <section id="CreatingjBPMProject"> - <?dbhtml filename="CreatingjBPMProject.html"?> - <title>Creating a jBPM Project</title> - <para>This section will show you how to use the Creation wizard for creating a new jBPM - project with already included source folders.</para> - <para>At first you should select <emphasis> - <property>File &gt;New Project...</property> - </emphasis> and then <emphasis> - <property>JBoss jBPM &gt; Process Project</property> - </emphasis> in the New Project dialog:</para> - <figure> - <title>New Project Dialog</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_1.png"/> - </imageobject> - </mediaobject> - </figure> - <para> Clicking <emphasis> - <property>Next</property> - </emphasis> brings us to the wizard page where it&apos;s necessary to specify the - name and location for the project. We choose, for example, <emphasis> - <property>HellojBPM</property> - </emphasis> as the name and accept the default location. </para> - <figure> - <title>Process Name and Location</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_2.png"/> - </imageobject> - </mediaobject> - </figure> - <para>Thus, our project will be - created in the workspace root directory by default. If you want to change the directory - for your future project, deselect <emphasis> - <property>Use default location</property> - </emphasis> and click <emphasis> - <property>Browse...</property></emphasis> button to set needed location or simply type it.</para> - <para>On the next screen you&apos;ll be prompted to select the core jBPM location that we have defined in the previous chapter.</para> - <figure> - <title>Core jBPM Location Specifying</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_9.png"/> - </imageobject> - </mediaobject> - </figure> - <para>Clicking on <emphasis> - <property>Finish</property> - </emphasis> results in the project being generated. The wizard creates four source - folders: one for the processes (<emphasis> - <property>src/main/jpdl</property> - </emphasis>), one for the java sources (<emphasis> - <property>src/main/java</property> - </emphasis>), one for the unit tests (<emphasis> - <property>src/test/java</property> - </emphasis>) and one for the resources such as the jbpm.properties and the - hibernate.properties files (<emphasis> - <property>src/main/config</property> - </emphasis>). In addition a classpath container with all the core jBPM libraries is - added to the project</para> - <figure> - <title>Layout of the Process Project</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_3.png"/> - </imageobject> - </mediaobject> - </figure> - <para>Looking inside the different source folders will reveal a number of other artifacts - that were generated, but we will leave these untouched for the moment. Instead, we will - look at another wizard that enables us to create an empty process definition.</para> - </section> - <section id="creating_an_empty_process_definition"> - <?dbhtml filename="creating_an_empty_process_definition.html"?> - <title>Creating an Empty Process Definition</title> - <para>Now when the project is set up, we can use a Creation wizard to create an empty - process definition. Bring up the <emphasis> - <property>New</property> - </emphasis> wizard by clicking the <emphasis> - <property>File &gt; New &gt; Other...</property> - </emphasis> menu item. The wizard opens on the <emphasis> - <property>Select Wizard</property> - </emphasis> page.</para> - <figure> - <title>The Select Wizard Page</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_4.png"/> - </imageobject> - </mediaobject> - </figure> - <para>Selecting the <emphasis> - <property>JBoss jBPM</property> - </emphasis> category, then the <emphasis> - <property>Process Definition</property> - </emphasis> item and clicking on the <emphasis> - <property>Next</property> - </emphasis> button brings us to the <emphasis> - <property>Create Process Definition</property> - </emphasis> page.</para> - <figure> - <title>The Create New Process Definion Page</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_5.png"/> - </imageobject> - </mediaobject> - </figure> - <para>We choose <emphasis> - <property>hello</property> - </emphasis> as the name of the process archive file. Click on the <emphasis> - <property>Finish</property> - </emphasis> button to end the wizard and open the process definition editor.</para> - <figure> - <title>The Process Definition Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_6.png" - scale="60"/> - </imageobject> - </mediaobject> - </figure> - - - <para>You can see in the Package Explorer that creating a process definition involves - creating a folder with the name of the process definition and populating this folder - with two .xml files : <emphasis> - <property>gpd.xml</property> - </emphasis> and <emphasis> - <property>processdefinition.xml</property>. - </emphasis></para> - <para>The <emphasis> - <property>gpd.xml</property> - </emphasis> contains the graphical information used by the process - definition editor. The <emphasis> - <property>processdefinition.xml</property> - </emphasis> file contains the actual process definition info without the graphical - rendering info. At present, the GPD assumes that these two files are siblings. More - sophisticated configuration will be supported later.</para> - - <section id="minimal_process_definition"> - <?dbhtml filename="minimal_process_definition.html"?> - <title>A Minimal Process Definition</title> - <para>Now we are ready to create a very simple process definition consisting of a begin - state, an intermediate state and an end state.</para> - <para>To make the configuration of actions much easier it&apos;s better to use the - jPDL perspective. It provides the tabbed Properties Editor which allows to configure - all the relevant properties of the current selected item. </para> - - <section id="adding_the_nodes"> - <?dbhtml filename="adding_the_nodes.html"?> - <title>Adding the Nodes</title> - <para>At first select respectively <emphasis> - <property>Start</property>, - </emphasis> <emphasis> - <property>State</property> - </emphasis> and <emphasis> - <property>End</property> - </emphasis> on the tools palette and click on the canvas to add these nodes to - the process definition. The result should look similar to this:</para> - <figure> - <title>A Simple Process With Three Nodes</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_7.png" - scale="60"/> - </imageobject> - </mediaobject> - </figure> - </section> - <section id="adding_transitions"> - <?dbhtml filename="adding_transitions.html"?> - <title>Adding Transitions</title> - <para>Then, we will connect the nodes with transitions. To do that select the <emphasis> - <property>Transition</property> - </emphasis> tool in the tools palette and click on the <emphasis> - <property>Start</property> - </emphasis> node, then move to the <emphasis> - <property>State</property> - </emphasis> node and click again to see the transition being drawn. Perform the - same steps to create a transition from the <emphasis> - <property>State</property> - </emphasis> node to the <emphasis> - <property>End</property> - </emphasis> node. The result will look like:</para> - <figure> - <title>A Simple Process With Transitions</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_8.png" - scale="60"/> - </imageobject> - </mediaobject> - </figure> - </section> - </section> - <para>Now, when you&apos;ve got background knowledge of simple project creation, let&apos;s move to more advanced tools.</para> - </section> - -</chapter> +<chapter id="GuidedTourJBossjBPMGPD" xreflabel="GuidedTourJBossjBPMGPD"> + <?dbhtml filename="GuidedTourJBossjBPMGPD.html"?> + <chapterinfo> + <keywordset> + <keyword>jBPM</keyword> + <keyword>JBoss</keyword> + <keyword>Process</keyword> + <keyword>Definition</keyword> + </keywordset> + </chapterinfo> + <title>A Guided Tour of JBoss jBPM GPD</title> + <para>In this chapter we suggest a step-by-step walk-through of creating and configuring your + own simple process. Let's try to organize a new jBPM project.</para> + <para>A wizard for creating a jBPM project is included in the GPD plugin. We have opted to + create a project based on a template already containing a number of advanced artifacts that + we will ignore for this section. In the future we will elaborate this wizard and offer the + possibility to create an empty jBPM project as well as projects based on templates taken + from the jBPM tutorial.</para> + <section id="CreatingjBPMProject"> + <?dbhtml filename="CreatingjBPMProject.html"?> + <title>Creating a jBPM Project</title> + <para>This section will show you how to use the Creation wizard for creating a new jBPM + project with already included source folders.</para> + <para>At first you should select <emphasis> + <property>File &gt;New Project...</property> + </emphasis> and then <emphasis> + <property>JBoss jBPM &gt; Process Project</property> + </emphasis> in the New Project dialog:</para> + <figure> + <title>New Project Dialog</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_1.png"/> + </imageobject> + </mediaobject> + </figure> + <para> Clicking <emphasis> + <property>Next</property> + </emphasis> brings us to the wizard page where it&apos;s necessary to specify the + name and location for the project. We choose, for example, <emphasis> + <property>HellojBPM</property> + </emphasis> as the name and accept the default location. </para> + <figure> + <title>Process Name and Location</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_2.png"/> + </imageobject> + </mediaobject> + </figure> + <para>Thus, our project will be created in the workspace root directory by default. If you + want to change the directory for your future project, deselect <emphasis> + <property>Use default location</property> + </emphasis> and click <emphasis> + <property>Browse...</property> + </emphasis> button to set needed location or simply type it.</para> + <para>On the next screen you&apos;ll be prompted to select the core jBPM location that + we have defined in the previous chapter.</para> + <figure> + <title>Core jBPM Location Specifying</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_9.png"/> + </imageobject> + </mediaobject> + </figure> + <para>Clicking on <emphasis> + <property>Finish</property> + </emphasis> results in the project being generated. The wizard creates four source + folders: one for the processes (<emphasis> + <property>src/main/jpdl</property> + </emphasis>), one for the java sources (<emphasis> + <property>src/main/java</property> + </emphasis>), one for the unit tests (<emphasis> + <property>src/test/java</property> + </emphasis>) and one for the resources such as the jbpm.properties and the + hibernate.properties files (<emphasis> + <property>src/main/config</property> + </emphasis>). In addition a classpath container with all the core jBPM libraries is + added to the project</para> + <figure> + <title>Layout of the Process Project</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_3.png"/> + </imageobject> + </mediaobject> + </figure> + <para>Looking inside the different source folders will reveal a number of other artifacts + that were generated, but we will leave these untouched for the moment. Instead, we will + look at another wizard that enables us to create an empty process definition.</para> + </section> + <section id="creating_an_empty_process_definition"> + <?dbhtml filename="creating_an_empty_process_definition.html"?> + <title>Creating an Empty Process Definition</title> + <para>Now when the project is set up, we can use a Creation wizard to create an empty + process definition. Bring up the <emphasis> + <property>New</property> + </emphasis> wizard by clicking the <emphasis> + <property>File &gt; New &gt; Other...</property> + </emphasis> menu item. The wizard opens on the <emphasis> + <property>Select Wizard</property> + </emphasis> page.</para> + <figure> + <title>The Select Wizard Page</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_4.png"/> + </imageobject> + </mediaobject> + </figure> + <para>Selecting the <emphasis> + <property>JBoss jBPM</property> + </emphasis> category, then the <emphasis> + <property>Process Definition</property> + </emphasis> item and clicking on the <emphasis> + <property>Next</property> + </emphasis> button brings us to the <emphasis> + <property>Create Process Definition</property> + </emphasis> page.</para> + <figure> + <title>The Create New Process Definion Page</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_5.png"/> + </imageobject> + </mediaobject> + </figure> + <para>We choose <emphasis> + <property>hello</property> + </emphasis> as the name of the process archive file. Click on the <emphasis> + <property>Finish</property> + </emphasis> button to end the wizard and open the process definition editor.</para> + <figure> + <title>The Process Definition Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_6.png" + scale="60"/> + </imageobject> + </mediaobject> + </figure> + + + <para>You can see in the Package Explorer that creating a process definition involves + creating a folder with the name of the process definition and populating this folder + with two .xml files : <emphasis> + <property>gpd.xml</property> + </emphasis> and <emphasis> + <property>processdefinition.xml</property>. </emphasis></para> + <para>The <emphasis> + <property>gpd.xml</property> + </emphasis> contains the graphical information used by the process definition editor. + The <emphasis> + <property>processdefinition.xml</property> + </emphasis> file contains the actual process definition info without the graphical + rendering info. At present, the GPD assumes that these two files are siblings. More + sophisticated configuration will be supported later.</para> + + <section id="minimal_process_definition"> + <?dbhtml filename="minimal_process_definition.html"?> + <title>A Minimal Process Definition</title> + <para>Now we are ready to create a very simple process definition consisting of a begin + state, an intermediate state and an end state.</para> + <para>To make the configuration of actions much easier it&apos;s better to use the + jPDL perspective. It provides the tabbed Properties Editor which allows to configure + all the relevant properties of the current selected item. </para> + + <section id="adding_the_nodes"> + <?dbhtml filename="adding_the_nodes.html"?> + <title>Adding the Nodes</title> + <para>At first select respectively <emphasis> + <property>Start</property>, </emphasis> + <emphasis> + <property>State</property> + </emphasis> and <emphasis> + <property>End</property> + </emphasis> on the tools palette and click on the canvas to add these nodes to + the process definition. The result should look similar to this:</para> + <figure> + <title>A Simple Process With Three Nodes</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_7.png" + scale="60"/> + </imageobject> + </mediaobject> + </figure> + </section> + <section id="adding_transitions"> + <?dbhtml filename="adding_transitions.html"?> + <title>Adding Transitions</title> + <para>Then, we will connect the nodes with transitions. To do that select the <emphasis> + <property>Transition</property> + </emphasis> tool in the tools palette and click on the <emphasis> + <property>Start</property> + </emphasis> node, then move to the <emphasis> + <property>State</property> + </emphasis> node and click again to see the transition being drawn. Perform the + same steps to create a transition from the <emphasis> + <property>State</property> + </emphasis> node to the <emphasis> + <property>End</property> + </emphasis> node. The result will look like:</para> + <figure> + <title>A Simple Process With Transitions</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/guided_tour_jboss_jbpmgpd/guided_tour_8.png" + scale="60"/> + </imageobject> + </mediaobject> + </figure> + <para>Now, when you&apos;ve got background knowledge of simple project creation, + let&apos;s move to more advanced tools.</para> + </section> + </section> + </section> + +</chapter> Modified: trunk/jbpm/docs/reference/en/modules/the_views.xml =================================================================== --- trunk/jbpm/docs/reference/en/modules/the_views.xml 2008-10-30 09:45:10 UTC (rev 11326) +++ trunk/jbpm/docs/reference/en/modules/the_views.xml 2008-10-30 09:45:29 UTC (rev 11327) @@ -1,235 +1,230 @@ <?xml version="1.0" encoding="UTF-8"?> -<chapter id="the_views" xreflabel="the_views"> - <?dbhtml filename="the_views.html"?> - <chapterinfo> - <keywordset> - <keyword>jBPM</keyword> - </keywordset> - </chapterinfo> - - <title>The views</title> - - <para>Here, it will be explained how to work with views and editors provided by JBDS.</para> - <para>The views are used for representation and navigation the resources you are working on at - the moment. One of the advantages of all the views is that all modifications made in the - currant-active file are immediately displayed in them. Let’s get acquainted more closely - with those that the <property>jPDL perspective</property> provides. </para> - - <figure> - <title>The jPDL Perspective Views and Editors</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_0.png" scale="80"/> - </imageobject> - </mediaobject> - </figure> - - <para>As you can see in the picture above, the <property>jPDL perspective</property> contains a complete set of - functionality that&apos;s necessary for working on the jBPM project.</para> - - <section id="the_outline_view"> - <?dbhtml filename="the_outline_view.html"?> - <title>The Outline View</title> - <para>To have a way to quickly see an outline of the process use the <emphasis> - <property>Outline view</property></emphasis> that is - presented as the classical tree. If it is not visible select <emphasis> - <property>Window &gt; Show view &gt; Outline</property>. - </emphasis></para> - - <figure> - <title>The Overview View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_1.png"/> - </imageobject> - </mediaobject> - </figure> - </section> - - <section id="the_overview"> - <?dbhtml filename="the_outline_view.html"?> - <title>The Overview</title> - <para>The main advantage of this view is that it gives visual representation of the whole - currant-developing process. Besides, the <emphasis> - <property>Overview</property></emphasis> comes as a scrollable thumbnail which - enables a better navigation of the process structure if it&apos;s too large.</para> - - <figure> - <title>The Overview</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_2.png"/> - </imageobject> - </mediaobject> - </figure> - </section> - - <section id="the_properties_view"> - <?dbhtml filename="the_properties_view.html"?> - <title>The Properties View</title> - <para> Here, we dwell on the JBDS <property>Properties view</property>.</para> - <para>Notice if it&apos;s not visible you can access it by navigating <emphasis> - <property>Window &gt; Show view &gt; Properties</property>. - </emphasis></para> - <para>The view shows the relevant properties of the selected item in the tabbed form. Every - item has its own set of properties, which can be directly editable in the Properties - view or by brining up the context menu.</para> - - <figure> - <title>The Properties View of selected Transition</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_3.png"/> - </imageobject> - </mediaobject> - </figure> - - <para>For example, on the picture above the Properties view displays all the properties for - a selected transition. Its name has been changed to <emphasis> - <property>to_auction</property>. - </emphasis> We&apos;ve done it directly in active General tab of the view. The same - way let&apos;s change the name for the second transition to <emphasis> - <property>to_end</property>. - </emphasis></para> - <para>If no one item is selected, the view represents the properties of the whole process - definition. </para> - - <figure> - <title>The Properties View of Process Definition</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_4.png"/> - </imageobject> - </mediaobject> - </figure> - - <para>In this case, it contains six tabs. The first one is the <emphasis> - <property>General</property>.</emphasis> It allows to specify - a process name and add necessary description. To illustrate let&apos;s change the process - definition name to <emphasis> - <property>jbay</property>. - </emphasis></para> - </section> - - <section id="jbpm_gpd_editor"> - <?dbhtml filename="direct_editing.html"?> - <title>The jBPM Graphical Process Designer editor.</title> - <para>The <property>jBPM GPD editor</property> includes four modes: Diagram, Deployment, Design and Source, which - are available as switchable tabs at the bottom of the editor. Let&apos;s dwell on - each of them.</para> - - <section id="the_diagram_mode"> - <title>The Diagram mode</title> - <para> In this mode we define the process in the form of a diagram by means of tools - provided on the left-hand side of the jBPM GPD. </para> - - <figure> - <title>The Diagram mode</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_5.png"/> - </imageobject> - </mediaobject> - </figure> - - <para>Besides, some properties can be directly edited in the <property>Diagram mode</property> of the - graphical editor. One example of this is the <emphasis> - <property>name</property> - </emphasis> property of nodes. You can edit this directly by selecting the node of - which you want to change the name and then click once inside this node. This enables - an editor in the node. We change the name of the node to <emphasis> - <property>auction</property>. - </emphasis></para> - </section> - - <section id="source_mode"> - <?dbhtml filename="the_source_view.html"?> - <title>The Source Mode</title> - <para>Now, that we have defined a simple process definition, we can have a look at the - XML that is being generated under the covers. To see this XML click on the Source - tab of the graphical process designer editor.</para> - - <figure> - <title>The Source Mode</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_6.png"/> - </imageobject> - </mediaobject> - </figure> - <para>The <property>Source mode</property> enables to easily manipulate our XML. That is manually inserting - and editing necessary elements or attributes. In addition, here you can take - advantage of content assist.</para> - </section> - - <section id="design_mode"> - <?dbhtml filename="the_design_view.html"?> - <title>The Design Mode</title> - <para>One more way to edit your file is to use <property>Design mode</property>. You can - see it in the next picture:</para> - <figure> - <title>The Design Mode</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_7.png"/> - </imageobject> - </mediaobject> - </figure> - - <para>As you can see above, this mode looks like a table in the first column of which - the process structure is performed. Here, you can also insert, remove and edit - elements or attributes, moreover add comments and instructions. Their values can be - directly edited in the second column of the Design mode table.</para> - <para>For instance, let’s add a comment on the second transition. For that, you should - bring up the context menu for it and choose <emphasis> - <property>Add Before > Comment</property>. - </emphasis></para> - - <figure> - <title>Adding a Comment</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_8.png"/> - </imageobject> - </mediaobject> - </figure> - <para>Then, we can put the text <emphasis>This - transition leads to the end state</emphasis> in the right column as its value.</para> - - <figure> - <title>Comment is added</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_9.png"/> - </imageobject> - </mediaobject> - </figure> - - </section> - - <section id="deployment_mode"> - <?dbhtml filename="the_deployment_view.html"?> - <title>The Deployment Mode</title> - <para>Finally, to adjust the deployment settings of the project you should switch on to - the tab that opens the <property>Deployment mode</property>. On the picture below the <property>Deployment mode</property> is - performed with default settings. Here, you can easily modify them or, if the - settings won&apos;t match your needs, to reset defaults. </para> - <figure> - <title>The Deployment Mode</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/the_views/the_views_10.png"/> - </imageobject> - </mediaobject> - </figure> - - <para>The button <emphasis> - <property>Test Connections</property> - </emphasis> is necessary to make sure whether all your settings are valid before - deploying the process.</para> - </section> - - </section> - - <para>Now that we&apos;ve seen how to work with <property>jPDL perspective</property>, let's pass on to the project testing.</para> -</chapter> +<chapter id="the_views" xreflabel="the_views"> + <?dbhtml filename="the_views.html"?> + <chapterinfo> + <keywordset> + <keyword>jBPM</keyword> + </keywordset> + </chapterinfo> + + <title>The views</title> + + <para>Here, it will be explained how to work with views and editors provided by JBDS.</para> + <para>The views are used for representation and navigation the resources you are working on at + the moment. One of the advantages of all the views is that all modifications made in the + currant-active file are immediately displayed in them. Let’s get acquainted more closely + with those that the <property>jPDL perspective</property> provides. </para> + + <figure> + <title>The jPDL Perspective Views and Editors</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_0.png" scale="80"/> + </imageobject> + </mediaobject> + </figure> + + <para>As you can see in the picture above, the <property>jPDL perspective</property> contains a + complete set of functionality that&apos;s necessary for working on the jBPM project.</para> + + <section id="the_outline_view"> + <?dbhtml filename="the_outline_view.html"?> + <title>The Outline View</title> + <para>To have a way to quickly see an outline of the process use the <emphasis> + <property>Outline view</property> + </emphasis> that is presented as the classical tree. If it is not visible select <emphasis> + <property>Window &gt; Show view &gt; Outline</property>. </emphasis></para> + + <figure> + <title>The Overview View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_1.png"/> + </imageobject> + </mediaobject> + </figure> + </section> + + <section id="the_overview"> + <?dbhtml filename="the_outline_view.html"?> + <title>The Overview</title> + <para>The main advantage of this view is that it gives visual representation of the whole + currant-developing process. Besides, the <emphasis> + <property>Overview</property> + </emphasis> comes as a scrollable thumbnail which enables a better navigation of the + process structure if it&apos;s too large.</para> + + <figure> + <title>The Overview</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_2.png"/> + </imageobject> + </mediaobject> + </figure> + </section> + + <section id="the_properties_view"> + <?dbhtml filename="the_properties_view.html"?> + <title>The Properties View</title> + <para> Here, we dwell on the JBDS <property>Properties view</property>.</para> + <para>Notice if it&apos;s not visible you can access it by navigating <emphasis> + <property>Window &gt; Show view &gt; Properties</property>. </emphasis></para> + <para>The view shows the relevant properties of the selected item in the tabbed form. Every + item has its own set of properties, which can be directly editable in the Properties + view or by brining up the context menu.</para> + + <figure> + <title>The Properties View of selected Transition</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_3.png"/> + </imageobject> + </mediaobject> + </figure> + + <para>For example, on the picture above the Properties view displays all the properties for + a selected transition. Its name has been changed to <emphasis> + <property>to_auction</property>. </emphasis> We&apos;ve done it directly in + active General tab of the view. The same way let&apos;s change the name for the + second transition to <emphasis> + <property>to_end</property>. </emphasis></para> + <para>If no one item is selected, the view represents the properties of the whole process + definition. </para> + + <figure> + <title>The Properties View of Process Definition</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_4.png"/> + </imageobject> + </mediaobject> + </figure> + + <para>In this case, it contains six tabs. The first one is the <emphasis> + <property>General</property>.</emphasis> It allows to specify a process name and add + necessary description. To illustrate let&apos;s change the process definition name + to <emphasis> + <property>jbay</property>. </emphasis></para> + </section> + + <section id="jbpm_gpd_editor"> + <?dbhtml filename="direct_editing.html"?> + <title>The jBPM Graphical Process Designer editor.</title> + <para>The <property>jBPM GPD editor</property> includes four modes: Diagram, Deployment, + Design and Source, which are available as switchable tabs at the bottom of the editor. + Let&apos;s dwell on each of them.</para> + + <section id="the_diagram_mode"> + <title>The Diagram mode</title> + <para> In this mode we define the process in the form of a diagram by means of tools + provided on the left-hand side of the jBPM GPD. </para> + + <figure> + <title>The Diagram mode</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_5.png"/> + </imageobject> + </mediaobject> + </figure> + + <para>Besides, some properties can be directly edited in the <property>Diagram + mode</property> of the graphical editor. One example of this is the <emphasis> + <property>name</property> + </emphasis> property of nodes. You can edit this directly by selecting the node of + which you want to change the name and then click once inside this node. This enables + an editor in the node. We change the name of the node to <emphasis> + <property>auction</property>. </emphasis></para> + </section> + + <section id="source_mode"> + <?dbhtml filename="the_source_view.html"?> + <title>The Source Mode</title> + <para>Now, that we have defined a simple process definition, we can have a look at the + XML that is being generated under the covers. To see this XML click on the Source + tab of the graphical process designer editor.</para> + + <figure> + <title>The Source Mode</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_6.png"/> + </imageobject> + </mediaobject> + </figure> + <para>The <property>Source mode</property> enables to easily manipulate our XML. That is + manually inserting and editing necessary elements or attributes. In addition, here + you can take advantage of content assist.</para> + </section> + + <section id="design_mode"> + <?dbhtml filename="the_design_view.html"?> + <title>The Design Mode</title> + <para>One more way to edit your file is to use <property>Design mode</property>. You can + see it in the next picture:</para> + <figure> + <title>The Design Mode</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_7.png"/> + </imageobject> + </mediaobject> + </figure> + + <para>As you can see above, this mode looks like a table in the first column of which + the process structure is performed. Here, you can also insert, remove and edit + elements or attributes, moreover add comments and instructions. Their values can be + directly edited in the second column of the Design mode table.</para> + <para>For instance, let’s add a comment on the second transition. For that, you should + bring up the context menu for it and choose <emphasis> + <property>Add Before > Comment</property>. </emphasis></para> + + <figure> + <title>Adding a Comment</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_8.png"/> + </imageobject> + </mediaobject> + </figure> + <para>Then, we can put the text <emphasis>This transition leads to the end + state</emphasis> in the right column as its value.</para> + + <figure> + <title>Comment is added</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_9.png"/> + </imageobject> + </mediaobject> + </figure> + + </section> + + <section id="deployment_mode"> + <?dbhtml filename="the_deployment_view.html"?> + <title>The Deployment Mode</title> + <para>Finally, to adjust the deployment settings of the project you should switch on to + the tab that opens the <property>Deployment mode</property>. On the picture below + the <property>Deployment mode</property> is performed with default settings. Here, + you can easily modify them or, if the settings won&apos;t match your needs, to + reset defaults. </para> + <figure> + <title>The Deployment Mode</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/the_views/the_views_10.png"/> + </imageobject> + </mediaobject> + </figure> + + <para>The button <emphasis> + <property>Test Connections</property> + </emphasis> is necessary to make sure whether all your settings are valid before + deploying the process.</para> + <para>Now that we&apos;ve seen how to work with <property>jPDL + perspective</property>, let's pass on to the project testing.</para> + </section> + </section> +</chapter>