[jbossseam-issues] [JBoss JIRA] Created: (JBSEAM-1169) ModelValidator throws exception when applied to component with no value
9:50 a.m.
ModelValidator throws exception when applied to component with no value
-----------------------------------------------------------------------
Key: JBSEAM-1169
URL: http://jira.jboss.com/jira/browse/JBSEAM-1169
Project: JBoss Seam
Issue Type: Bug
Components: Core
Affects Versions: 1.1.6.GA
Environment: Any
Reporter: Mike Quilleash
There are some (albeit) very unusual cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
9:50 a.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1169) ModelValidator throws exception when applied to component with no value
[ http://jira.jboss.com/jira/browse/JBSEAM-1169?page=all ]
Mike Quilleash updated JBSEAM-1169:
-----------------------------------
Description:
There are some (albeit very unusual) cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
was:
There are some (albeit) very unusual cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
ModelValidator throws exception when applied to component with no
value
-----------------------------------------------------------------------
Key: JBSEAM-1169
URL: http://jira.jboss.com/jira/browse/JBSEAM-1169
Project: JBoss Seam
Issue Type: Bug
Components: Core
Affects Versions: 1.1.6.GA
Environment: Any
Reporter: Mike Quilleash
There are some (albeit very unusual) cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:55 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Closed: (JBSEAM-1169) ModelValidator throws exception when applied to component with no value
[ http://jira.jboss.com/jira/browse/JBSEAM-1169?page=all ]
Pete Muir closed JBSEAM-1169.
-----------------------------
Resolution: Duplicate Issue
Assignee: Pete Muir
Mike, I think this is a duplicate, reopen if it isn't. Thanks.
ModelValidator throws exception when applied to component with no
value
-----------------------------------------------------------------------
Key: JBSEAM-1169
URL: http://jira.jboss.com/jira/browse/JBSEAM-1169
Project: JBoss Seam
Issue Type: Bug
Components: Core
Affects Versions: 1.1.6.GA
Environment: Any
Reporter: Mike Quilleash
Assigned To: Pete Muir
There are some (albeit very unusual) cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:26 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Reopened: (JBSEAM-1169) ModelValidator throws exception when applied to component with no value
[ http://jira.jboss.com/jira/browse/JBSEAM-1169?page=all ]
Mike Quilleash reopened JBSEAM-1169:
------------------------------------
This is similar but not identical to the other issue.
The other is about getExpressionString() returning null.
This is one is concerning this piece of code in ModelValidator
ValueBinding valueBinding = component.getValueBinding("value");
if (valueBinding==null)
{
throw new RuntimeException("component has no value attribute: " +
component.getId());
}
It is possible to have a null "value" valueBinding (sounds silly but does
happen).
Cheers.
ModelValidator throws exception when applied to component with no
value
-----------------------------------------------------------------------
Key: JBSEAM-1169
URL: http://jira.jboss.com/jira/browse/JBSEAM-1169
Project: JBoss Seam
Issue Type: Bug
Components: Core
Affects Versions: 1.1.6.GA
Environment: Any
Reporter: Mike Quilleash
Assigned To: Pete Muir
There are some (albeit very unusual) cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:34 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Commented: (JBSEAM-1169) ModelValidator throws exception when applied to component with no value
[ http://jira.jboss.com/jira/browse/JBSEAM-1169?page=comments#action_12360737 ]
Pete Muir commented on JBSEAM-1169:
-----------------------------------
I'm assuming that this problem occurs when you are using s:validateAll? I can't
quite see how this happens - we pick out EditableValueHolders, which must have getters and
setters for value (which means that the value attribute is used). Can you give me an
example?
ModelValidator throws exception when applied to component with no
value
-----------------------------------------------------------------------
Key: JBSEAM-1169
URL: http://jira.jboss.com/jira/browse/JBSEAM-1169
Project: JBoss Seam
Issue Type: Bug
Components: Core
Affects Versions: 1.1.6.GA
Environment: Any
Reporter: Mike Quilleash
Assigned To: Pete Muir
There are some (albeit very unusual) cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:17 a.m.
New subject: [jbossseam-issues] [JBoss JIRA] Resolved: (JBSEAM-1169) ModelValidator throws exception when applied to component with no value
[ http://jira.jboss.com/jira/browse/JBSEAM-1169?page=all ]
Pete Muir resolved JBSEAM-1169.
-------------------------------
Resolution: Done
Mike, you are completely correct - I checked the spec and it says against UIInput "if
the value has an associated valueExpression". Done.
ModelValidator throws exception when applied to component with no
value
-----------------------------------------------------------------------
Key: JBSEAM-1169
URL: http://jira.jboss.com/jira/browse/JBSEAM-1169
Project: JBoss Seam
Issue Type: Bug
Components: Core
Affects Versions: 1.1.6.GA
Environment: Any
Reporter: Mike Quilleash
Assigned To: Pete Muir
There are some (albeit very unusual) cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:07 a.m.
New subject: [jbossseam-issues] [JBoss JIRA] Closed: (JBSEAM-1169) ModelValidator throws exception when applied to component with no value
[ http://jira.jboss.com/jira/browse/JBSEAM-1169?page=all ]
Pete Muir closed JBSEAM-1169.
-----------------------------
ModelValidator throws exception when applied to component with no
value
-----------------------------------------------------------------------
Key: JBSEAM-1169
URL: http://jira.jboss.com/jira/browse/JBSEAM-1169
Project: JBoss Seam
Issue Type: Bug
Components: Core
Affects Versions: 1.1.6.GA
Environment: Any
Reporter: Mike Quilleash
Assigned To: Pete Muir
There are some (albeit very unusual) cases where a UIInput component does not have a
value="#{.....}" binding. The ModelValidator throws a RuntimeException in this
case. Should just silently not validate if the valueBinding is not present.
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6344
days inactive
6468
days old
6 comments
2 participants
participants (2)
-
Mike Quilleash (JIRA) -
Pete Muir (JIRA)