1:49 p.m.
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[] attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file upload
doesn't use the standard "value" attribute (needed by the ModelValidator)
but "data".
To work you have to use a value attribute to your fileupload component. At the moment this
work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:51 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=all ]
Bruno Bieth updated JBSEAM-1981:
--------------------------------
Attachment: UIFileUpload.java
The patched file upload component.
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:01 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Commented: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=comments#action_12379002 ]
Pete Muir commented on JBSEAM-1981:
-----------------------------------
Can you post a patch, and not import com.sun stuff! Thanks!
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:21 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Commented: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=comments#action_12379017 ]
Bruno Bieth commented on JBSEAM-1981:
-------------------------------------
Sorry for the com.sun stuff, eclipse added it by mistake when doing autocompletion ...
just remove it.
I've formatted the code as well with eclipse (shortcut habit ...) and changed few
methods ... looked better to me to just post the whole file.
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:25 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Commented: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=comments#action_12379020 ]
Pete Muir commented on JBSEAM-1981:
-----------------------------------
A patch allows us to see your exact changes easily whilst just posting a file
doesn't.
I won't be able to look at it unless you post a patch (sorry), thought Shane might.
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:27 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Commented: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=comments#action_12379022 ]
Pete Muir commented on JBSEAM-1981:
-----------------------------------
Also, the file now doesn't conform to the style conventions used in Seam source code
(eg. new lines, spaces/tabs)
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:46 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Commented: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=comments#action_12379037 ]
Bruno Bieth commented on JBSEAM-1981:
-------------------------------------
Well I haven't been working with the CVS version and I haven't found patch
function with the local history ...
This is a very minor change on a very simple file. If you need to have the differences
pointed out, just use the compare function in your editor. To format the code I guess you
should have format rules (which I don't have) and it takes 2sec to apply it (well at
least with eclipse).
Cheers
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:28 a.m.
New subject: [jbossseam-issues] [JBoss JIRA] Assigned: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=all ]
Shane Bryzak reassigned JBSEAM-1981:
------------------------------------
Assignee: Shane Bryzak
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Reporter: Bruno Bieth
Assigned To: Shane Bryzak
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:28 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1981) enable validation on file upload component
[ http://jira.jboss.com/jira/browse/JBSEAM-1981?page=all ]
Pete Muir updated JBSEAM-1981:
------------------------------
Component/s: JSF
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: http://jira.jboss.com/jira/browse/JBSEAM-1981
Project: JBoss Seam
Issue Type: Patch
Components: JSF
Reporter: Bruno Bieth
Assigned To: Shane Bryzak
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:26 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Closed: (JBSEAM-1981) enable validation on file upload component
[
https://jira.jboss.org/jira/browse/JBSEAM-1981?page=com.atlassian.jira.pl...
]
Pete Muir closed JBSEAM-1981.
-----------------------------
Resolution: Rejected
Code is unusable as not in diff format and makes huge ws changes.
enable validation on file upload component
------------------------------------------
Key: JBSEAM-1981
URL: https://jira.jboss.org/jira/browse/JBSEAM-1981
Project: Seam
Issue Type: Patch
Components: JSF Integration
Reporter: Bruno Bieth
Assignee: Shane Bryzak
Attachments: UIFileUpload.java
Currently file upload can't be validated.
The attached patch allow to use the hibernate validation framework with byte[]
attribute.
You may have, for instance, to check if an uploaded file is an Image.
About the patch :
First the submittedValue is not set so the validation phase is skipped, second file
upload doesn't use the standard "value" attribute (needed by the
ModelValidator) but "data".
To work you have to use a value attribute to your fileupload component. At the moment
this work only with Facelets. For backward compatibility the data attribute is kept (but
validation won't work).
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5815
days inactive
6122
days old
9 comments
3 participants
participants (3)
-
Bruno Bieth (JIRA) -
Pete Muir (JIRA)
-
Shane Bryzak (JIRA)