4:19 a.m.
Constrain width or height for s:graphicImage
--------------------------------------------
Key: JBSEAM-1123
URL: http://jira.jboss.com/jira/browse/JBSEAM-1123
Project: JBoss Seam
Issue Type: Feature Request
Components: JSF
Affects Versions: 1.2.1.GA
Reporter: Shane Bryzak
Assigned To: Pete Muir
Priority: Minor
Pete - It would be nice if s:transformImageSize could constrain an image by either its
width or height. I have a scenario where neither the width or height should exceed 80px,
yet the ratio should be maintained. Something along the lines of this syntax would
probably do the job but you can probably come up with something nicer:
<s:graphicImage value="#{image}">
<s:transformImageSize max-width="80" max-height="80"
maintainRatio="true"/>
</s:graphicImage>
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:14 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1123) Constrain width or height for s:graphicImage
[ http://jira.jboss.com/jira/browse/JBSEAM-1123?page=all ]
Pete Muir updated JBSEAM-1123:
------------------------------
Fix Version/s: 1.3.0.BETA1
How about
<s:constrainImageHeight max="100" min="50" />
<s:constrainImageWidth max="" min="" />
<s:constrainImageRatio maintainOriginal="true" />
e.g
The problem here is that some transforms just aren't possible e.g. if you had a image
40x40 in the above example, you could never scale it to the dimensions specified above and
maintain the aspect ratio. As the idea is that you *don't* know the image size... I
suppose we need some sort of defined precedence system e.g.
<s:constrainImageHeight min="200" precedence="low" />
<s:constrainImageWidth max="40" precedence="high" />
<s:constrainImageRatio maintainOriginal="true"
precedence="required" />
And then the algorithm would try to fulfill all goals, and drop optional ones if it
can't do it. Log an error and a facesmessage if it can't meet required goals.
Constrain width or height for s:graphicImage
--------------------------------------------
Key: JBSEAM-1123
URL: http://jira.jboss.com/jira/browse/JBSEAM-1123
Project: JBoss Seam
Issue Type: Feature Request
Components: JSF
Affects Versions: 1.2.1.GA
Reporter: Shane Bryzak
Assigned To: Pete Muir
Priority: Minor
Fix For: 1.3.0.BETA1
Pete - It would be nice if s:transformImageSize could constrain an image by either its
width or height. I have a scenario where neither the width or height should exceed 80px,
yet the ratio should be maintained. Something along the lines of this syntax would
probably do the job but you can probably come up with something nicer:
<s:graphicImage value="#{image}">
<s:transformImageSize max-width="80" max-height="80"
maintainRatio="true"/>
</s:graphicImage>
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:58 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Commented: (JBSEAM-1123) Constrain width or height for s:graphicImage
[ http://jira.jboss.com/jira/browse/JBSEAM-1123?page=comments#action_12357875 ]
Shane Bryzak commented on JBSEAM-1123:
--------------------------------------
Sounds good to me.
Constrain width or height for s:graphicImage
--------------------------------------------
Key: JBSEAM-1123
URL: http://jira.jboss.com/jira/browse/JBSEAM-1123
Project: JBoss Seam
Issue Type: Feature Request
Components: JSF
Affects Versions: 1.2.1.GA
Reporter: Shane Bryzak
Assigned To: Pete Muir
Priority: Minor
Fix For: 1.3.0.BETA1
Pete - It would be nice if s:transformImageSize could constrain an image by either its
width or height. I have a scenario where neither the width or height should exceed 80px,
yet the ratio should be maintained. Something along the lines of this syntax would
probably do the job but you can probably come up with something nicer:
<s:graphicImage value="#{image}">
<s:transformImageSize max-width="80" max-height="80"
maintainRatio="true"/>
</s:graphicImage>
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:19 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1123) Constrain width or height for s:graphicImage
[ http://jira.jboss.com/jira/browse/JBSEAM-1123?page=all ]
Gavin King updated JBSEAM-1123:
-------------------------------
Fix Version/s: 1.3.1.BETA1
(was: 1.3.0.ALPHA)
Constrain width or height for s:graphicImage
--------------------------------------------
Key: JBSEAM-1123
URL: http://jira.jboss.com/jira/browse/JBSEAM-1123
Project: JBoss Seam
Issue Type: Feature Request
Components: JSF
Affects Versions: 1.2.1.GA
Reporter: Shane Bryzak
Assigned To: Pete Muir
Priority: Minor
Fix For: 1.3.1.BETA1
Pete - It would be nice if s:transformImageSize could constrain an image by either its
width or height. I have a scenario where neither the width or height should exceed 80px,
yet the ratio should be maintained. Something along the lines of this syntax would
probably do the job but you can probably come up with something nicer:
<s:graphicImage value="#{image}">
<s:transformImageSize max-width="80" max-height="80"
maintainRatio="true"/>
</s:graphicImage>
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:05 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1123) Constrain width or height for s:graphicImage
[ http://jira.jboss.com/jira/browse/JBSEAM-1123?page=all ]
Gavin King updated JBSEAM-1123:
-------------------------------
Fix Version/s: (was: 1.3.0.BETA1)
Constrain width or height for s:graphicImage
--------------------------------------------
Key: JBSEAM-1123
URL: http://jira.jboss.com/jira/browse/JBSEAM-1123
Project: JBoss Seam
Issue Type: Feature Request
Components: JSF
Affects Versions: 1.2.1.GA
Reporter: Shane Bryzak
Assigned To: Pete Muir
Priority: Minor
Pete - It would be nice if s:transformImageSize could constrain an image by either its
width or height. I have a scenario where neither the width or height should exceed 80px,
yet the ratio should be maintained. Something along the lines of this syntax would
probably do the job but you can probably come up with something nicer:
<s:graphicImage value="#{image}">
<s:transformImageSize max-width="80" max-height="80"
maintainRatio="true"/>
</s:graphicImage>
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:12 a.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1123) Constrain width or height for s:graphicImage
[ http://jira.jboss.com/jira/browse/JBSEAM-1123?page=all ]
Pete Muir updated JBSEAM-1123:
------------------------------
Component/s: JSF Controls
(was: JSF Integration)
Constrain width or height for s:graphicImage
--------------------------------------------
Key: JBSEAM-1123
URL: http://jira.jboss.com/jira/browse/JBSEAM-1123
Project: JBoss Seam
Issue Type: Feature Request
Components: JSF Controls
Affects Versions: 1.2.1.GA
Reporter: Shane Bryzak
Assigned To: Pete Muir
Priority: Minor
Pete - It would be nice if s:transformImageSize could constrain an image by either its
width or height. I have a scenario where neither the width or height should exceed 80px,
yet the ratio should be maintained. Something along the lines of this syntax would
probably do the job but you can probably come up with something nicer:
<s:graphicImage value="#{image}">
<s:transformImageSize max-width="80" max-height="80"
maintainRatio="true"/>
</s:graphicImage>
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:47 p.m.
New subject: [jbossseam-issues] [JBoss JIRA] Updated: (JBSEAM-1123) Constrain width or height for s:graphicImage
[ http://jira.jboss.com/jira/browse/JBSEAM-1123?page=all ]
Pete Muir updated JBSEAM-1123:
------------------------------
Assignee: (was: Pete Muir)
Constrain width or height for s:graphicImage
--------------------------------------------
Key: JBSEAM-1123
URL: http://jira.jboss.com/jira/browse/JBSEAM-1123
Project: JBoss Seam
Issue Type: Feature Request
Components: JSF Controls
Affects Versions: 1.2.1.GA
Reporter: Shane Bryzak
Priority: Minor
Pete - It would be nice if s:transformImageSize could constrain an image by either its
width or height. I have a scenario where neither the width or height should exceed 80px,
yet the ratio should be maintained. Something along the lines of this syntax would
probably do the job but you can probably come up with something nicer:
<s:graphicImage value="#{image}">
<s:transformImageSize max-width="80" max-height="80"
maintainRatio="true"/>
</s:graphicImage>
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6605
days inactive
6953
days old
6 comments
3 participants
participants (3)
-
Gavin King (JIRA) -
Pete Muir (JIRA)
-
Shane Bryzak (JIRA)