1:02 p.m.
Hi,
I try to add this to the standalone.xml via CLI:
<subsystem xmlns="urn:jboss:domain:security:1.2">
<security-domains>
....
<security-domain name="lbank"
cache-type="default">
<authentication>
<login-module code="UsersRoles"
flag="required">
<module-option name="usersProperties"
value="${jboss.server.config.dir}/lbank-users.properties"/>
<module-option name="rolesProperties"
value="${jboss.server.config.dir}/lbank-roles.properties"/>
<module-option name="password-stacking"
value="useFirstPass"/>
</login-module>
</authentication>
</security-domain>
If I add it to XML the CLI will show:
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank:read-resource(recursive=true)
{
"outcome" => "success",
"result" => {
"acl" => undefined,
"audit" => undefined,
"authorization" => undefined,
"cache-type" => "default",
"identity-trust" => undefined,
"jsse" => undefined,
"mapping" => undefined,
"authentication" => {"classic" =>
{"login-modules" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]}}
}
}
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:read-attribute(name=login-modules)
{
"outcome" => "success",
"result" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]
}
/
#simple is
//subsystem=security/security-domain=lbank:add(cache-type=default)/
but how to know that "classic" must used?
//subsystem=security/security-domain=lbank/authentication=/
tab completition will not help, only if I type =classic: the tab
completition will show commands otherwise not
I suppose that this should be correct, but it shows an error:
EAP6
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014688: Wrong type for value.
Expected [LIST] but was STRING",
"rolled-back" => true
}
/
AS7.2 (upstream)
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014807: Management resource '[
(\"subsystem\" => \"security\"),
(\"security-domain\" => \"lbank2\"),
(\"authentication\" => \"classic\")
]' not found",
"rolled-back" => true
}/
Next difficulty is to add the module-options with expressions.
Any guiding or help?
Wolf
BTW the CLI tab completition crash:
//subsystem=security/security-domain=lbankx/authentication=(
java.lang.IllegalArgumentException: The argument value is not specified
for name: 'null'
at
org.jboss.as.cli.operation.impl.DefaultOperationRequestBuilder.addProperty(DefaultOperationRequestBuilder.java:113)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:208)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:51)
at
org.jboss.as.cli.operation.OperationRequestCompleter.complete(OperationRequestCompleter.java:142)
at org.jboss.as.cli.CommandCompleter.complete(CommandCompleter.java:93)
at org.jboss.as.cli.impl.Console$Factory$1$1.complete(Console.java:96)
at org.jboss.jreadline.console.Console.complete(Console.java:809)
at org.jboss.jreadline.console.Console.read(Console.java:383)
at org.jboss.jreadline.console.Console.read(Console.java:221)
at org.jboss.as.cli.impl.Console$Factory$1.readLine(Console.java:166)
at
org.jboss.as.cli.impl.CommandContextImpl.interact(CommandContextImpl.java:1129)
at org.jboss.as.cli.impl.CliLauncher.main(CliLauncher.java:243)
at org.jboss.as.cli.CommandLineMain.main(CommandLineMain.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.jboss.modules.Module.run(Module.java:270)
at org.jboss.modules.Main.main(Main.java:294)
/
3:54 p.m.
Wolf,
module-options do not support expressions yet, there is an issue open to
add support for it: https://issues.jboss.org/browse/AS7-5177
I have started working on it, but am not done yet..
--
tomaz
On Fri, Jul 27, 2012 at 8:02 PM, Wolf-Dieter Fink <wfink(a)redhat.com> wrote:
Hi,
I try to add this to the standalone.xml via CLI:
<subsystem xmlns="urn:jboss:domain:security:1.2">
<security-domains>
....
<security-domain name="lbank"
cache-type="default">
<authentication>
<login-module code="UsersRoles"
flag="required">
<module-option name="usersProperties"
value="${jboss.server.config.dir}/lbank-users.properties"/>
<module-option name="rolesProperties"
value="${jboss.server.config.dir}/lbank-roles.properties"/>
<module-option name="password-stacking"
value="useFirstPass"/>
</login-module>
</authentication>
</security-domain>
If I add it to XML the CLI will show:
*[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank:read-resource(recursive=true)
{
"outcome" => "success",
"result" => {
"acl" => undefined,
"audit" => undefined,
"authorization" => undefined,
"cache-type" => "default",
"identity-trust" => undefined,
"jsse" => undefined,
"mapping" => undefined,
"authentication" => {"classic" =>
{"login-modules" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]}}
}
}
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:read-attribute(name=login-modules)
{
"outcome" => "success",
"result" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]
}
*
#simple is
*/subsystem=security/security-domain=lbank:add(cache-type=default)*
but how to know that "classic" must used?
* /subsystem=security/security-domain=lbank/authentication=*
tab completition will not help, only if I type =classic: the tab
completition will show commands otherwise not
I suppose that this should be correct, but it shows an error:
EAP6
*[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014688: Wrong type for value.
Expected
[LIST] but was STRING",
"rolled-back" => true
}
*
AS7.2 (upstream)
*[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014807: Management resource '[
(\"subsystem\" => \"security\"),
(\"security-domain\" => \"lbank2\"),
(\"authentication\" => \"classic\")
]' not found",
"rolled-back" => true
}*
Next difficulty is to add the module-options with expressions.
Any guiding or help?
Wolf
BTW the CLI tab completition crash:
*/subsystem=security/security-domain=lbankx/authentication=(
java.lang.IllegalArgumentException: The argument value is not specified
for name: 'null'
at
org.jboss.as.cli.operation.impl.DefaultOperationRequestBuilder.addProperty(DefaultOperationRequestBuilder.java:113)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:208)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:51)
at
org.jboss.as.cli.operation.OperationRequestCompleter.complete(OperationRequestCompleter.java:142)
at org.jboss.as.cli.CommandCompleter.complete(CommandCompleter.java:93)
at org.jboss.as.cli.impl.Console$Factory$1$1.complete(Console.java:96)
at org.jboss.jreadline.console.Console.complete(Console.java:809)
at org.jboss.jreadline.console.Console.read(Console.java:383)
at org.jboss.jreadline.console.Console.read(Console.java:221)
at org.jboss.as.cli.impl.Console$Factory$1.readLine(Console.java:166)
at
org.jboss.as.cli.impl.CommandContextImpl.interact(CommandContextImpl.java:1129)
at org.jboss.as.cli.impl.CliLauncher.main(CliLauncher.java:243)
at org.jboss.as.cli.CommandLineMain.main(CommandLineMain.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.jboss.modules.Module.run(Module.java:270)
at org.jboss.modules.Main.main(Main.java:294)
*
_______________________________________________
jboss-as7-dev mailing list
jboss-as7-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
4:14 a.m.
Thanks Tomaz,
but in my case I strip the command and did not use module-options but
neither EAP6 nor AS7.2.
The messages are different, see eMail thread.
The validation looks correct in case of AS7.2, if I drop i.e. 'flag' a
validation error is shown.
Wolf
On 07/28/2012 10:54 PM, Tomaž Cerar wrote:
Wolf,
module-options do not support expressions yet, there is an issue open
to add support for it: https://issues.jboss.org/browse/AS7-5177
I have started working on it, but am not done yet..
--
tomaz
On Fri, Jul 27, 2012 at 8:02 PM, Wolf-Dieter Fink <wfink(a)redhat.com
<mailto:wfink@redhat.com>> wrote:
Hi,
I try to add this to the standalone.xml via CLI:
<subsystem xmlns="urn:jboss:domain:security:1.2">
<security-domains>
....
<security-domain name="lbank"
cache-type="default">
<authentication>
<login-module code="UsersRoles"
flag="required">
<module-option name="usersProperties"
value="${jboss.server.config.dir}/lbank-users.properties"/>
<module-option name="rolesProperties"
value="${jboss.server.config.dir}/lbank-roles.properties"/>
<module-option
name="password-stacking" value="useFirstPass"/>
</login-module>
</authentication>
</security-domain>
If I add it to XML the CLI will show:
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank:read-resource(recursive=true)
{
"outcome" => "success",
"result" => {
"acl" => undefined,
"audit" => undefined,
"authorization" => undefined,
"cache-type" => "default",
"identity-trust" => undefined,
"jsse" => undefined,
"mapping" => undefined,
"authentication" => {"classic" =>
{"login-modules" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]}}
}
}
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:read-attribute(name=login-modules)
{
"outcome" => "success",
"result" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]
}
/
#simple is
//subsystem=security/security-domain=lbank:add(cache-type=default)/
but how to know that "classic" must used?
//subsystem=security/security-domain=lbank/authentication=/
tab completition will not help, only if I type =classic: the tab
completition will show commands otherwise not
I suppose that this should be correct, but it shows an error:
EAP6
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014688: Wrong type for value.
Expected [LIST] but was STRING",
"rolled-back" => true
}
/
AS7.2 (upstream)
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014807: Management resource
'[
(\"subsystem\" => \"security\"),
(\"security-domain\" => \"lbank\"),
(\"authentication\" => \"classic\")
]' not found",
"rolled-back" => true
}/
Next difficulty is to add the module-options with expressions.
Any guiding or help?
Wolf
BTW the CLI tab completition crash:
//subsystem=security/security-domain=lbankx/authentication=(
java.lang.IllegalArgumentException: The argument value is not
specified for name: 'null'
at
org.jboss.as.cli.operation.impl.DefaultOperationRequestBuilder.addProperty(DefaultOperationRequestBuilder.java:113)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:208)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:51)
at
org.jboss.as.cli.operation.OperationRequestCompleter.complete(OperationRequestCompleter.java:142)
at
org.jboss.as.cli.CommandCompleter.complete(CommandCompleter.java:93)
at
org.jboss.as.cli.impl.Console$Factory$1$1.complete(Console.java:96)
at org.jboss.jreadline.console.Console.complete(Console.java:809)
at org.jboss.jreadline.console.Console.read(Console.java:383)
at org.jboss.jreadline.console.Console.read(Console.java:221)
at
org.jboss.as.cli.impl.Console$Factory$1.readLine(Console.java:166)
at
org.jboss.as.cli.impl.CommandContextImpl.interact(CommandContextImpl.java:1129)
at org.jboss.as.cli.impl.CliLauncher.main(CliLauncher.java:243)
at org.jboss.as.cli.CommandLineMain.main(CommandLineMain.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.jboss.modules.Module.run(Module.java:270)
at org.jboss.modules.Main.main(Main.java:294)
/
_______________________________________________
jboss-as7-dev mailing list
jboss-as7-dev(a)lists.jboss.org <mailto:jboss-as7-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
11:13 a.m.
No help at all?
On 07/27/2012 08:02 PM, Wolf-Dieter Fink wrote:
Hi,
I try to add this to the standalone.xml via CLI:
<subsystem xmlns="urn:jboss:domain:security:1.2">
<security-domains>
....
<security-domain name="lbank"
cache-type="default">
<authentication>
<login-module code="UsersRoles"
flag="required">
<module-option name="usersProperties"
value="${jboss.server.config.dir}/lbank-users.properties"/>
<module-option name="rolesProperties"
value="${jboss.server.config.dir}/lbank-roles.properties"/>
<module-option name="password-stacking"
value="useFirstPass"/>
</login-module>
</authentication>
</security-domain>
If I add it to XML the CLI will show:
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank:read-resource(recursive=true)
{
"outcome" => "success",
"result" => {
"acl" => undefined,
"audit" => undefined,
"authorization" => undefined,
"cache-type" => "default",
"identity-trust" => undefined,
"jsse" => undefined,
"mapping" => undefined,
"authentication" => {"classic" =>
{"login-modules" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]}}
}
}
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:read-attribute(name=login-modules)
{
"outcome" => "success",
"result" => [{
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties"),
("password-stacking" => "useFirstPass")
]
}]
}
/
#simple is
//subsystem=security/security-domain=lbank:add(cache-type=default)/
but how to know that "classic" must used?
//subsystem=security/security-domain=lbank/authentication=/
tab completition will not help, only if I type =classic: the tab
completition will show commands otherwise not
I suppose that this should be correct, but it shows an error:
EAP6
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014688: Wrong type for value.
Expected [LIST] but was STRING",
"rolled-back" => true
}
/
AS7.2 (upstream)
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014807: Management resource '[
(\"subsystem\" => \"security\"),
(\"security-domain\" => \"lbank2\"),
(\"authentication\" => \"classic\")
]' not found",
"rolled-back" => true
}/
Next difficulty is to add the module-options with expressions.
Any guiding or help?
Wolf
BTW the CLI tab completition crash:
//subsystem=security/security-domain=lbankx/authentication=(
java.lang.IllegalArgumentException: The argument value is not
specified for name: 'null'
at
org.jboss.as.cli.operation.impl.DefaultOperationRequestBuilder.addProperty(DefaultOperationRequestBuilder.java:113)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:208)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:51)
at
org.jboss.as.cli.operation.OperationRequestCompleter.complete(OperationRequestCompleter.java:142)
at
org.jboss.as.cli.CommandCompleter.complete(CommandCompleter.java:93)
at org.jboss.as.cli.impl.Console$Factory$1$1.complete(Console.java:96)
at org.jboss.jreadline.console.Console.complete(Console.java:809)
at org.jboss.jreadline.console.Console.read(Console.java:383)
at org.jboss.jreadline.console.Console.read(Console.java:221)
at org.jboss.as.cli.impl.Console$Factory$1.readLine(Console.java:166)
at
org.jboss.as.cli.impl.CommandContextImpl.interact(CommandContextImpl.java:1129)
at org.jboss.as.cli.impl.CliLauncher.main(CliLauncher.java:243)
at org.jboss.as.cli.CommandLineMain.main(CommandLineMain.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.jboss.modules.Module.run(Module.java:270)
at org.jboss.modules.Main.main(Main.java:294)
/
_______________________________________________
jboss-as7-dev mailing list
jboss-as7-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
10:53 a.m.
On 07/27/2012 08:02 PM, Wolf-Dieter Fink wrote:
#simple is
//subsystem=security/security-domain=lbank:add(cache-type=default)/
but how to know that "classic" must used?
//subsystem=security/security-domain=lbank/authentication=/
tab completition will not help, only if I type =classic: the tab
completition will show commands otherwise not
This is for the security team to answer.
I suppose that this should be correct, but it shows an error:
EAP6
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014688: Wrong type for value.
Expected [LIST] but was STRING",
"rolled-back" => true
}
/
Looks like this version doesn't support simplified syntax for parameter
values, so try using complete DMR format, i.e.
[{"code"=>"UsersRoles", ...
AS7.2 (upstream)
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
{
"outcome" => "failed",
"failure-description" => "JBAS014807: Management resource '[
(\"subsystem\" => \"security\"),
(\"security-domain\" => \"lbank2\"),
(\"authentication\" => \"classic\")
]' not found",
"rolled-back" => true
}/
The classic doesn't exist. It has to be added first, i.e.
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:add( ...
where you initialize the login-modules.
Next difficulty is to add the module-options with expressions.
Any guiding or help?
Wolf
BTW the CLI tab completition crash:
//subsystem=security/security-domain=lbankx/authentication=(
java.lang.IllegalArgumentException: The argument value is not specified
for name: 'null'
at
org.jboss.as.cli.operation.impl.DefaultOperationRequestBuilder.addProperty(DefaultOperationRequestBuilder.java:113)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:208)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:51)
at
org.jboss.as.cli.operation.OperationRequestCompleter.complete(OperationRequestCompleter.java:142)
at org.jboss.as.cli.CommandCompleter.complete(CommandCompleter.java:93)
at org.jboss.as.cli.impl.Console$Factory$1$1.complete(Console.java:96)
at org.jboss.jreadline.console.Console.complete(Console.java:809)
at org.jboss.jreadline.console.Console.read(Console.java:383)
at org.jboss.jreadline.console.Console.read(Console.java:221)
at org.jboss.as.cli.impl.Console$Factory$1.readLine(Console.java:166)
at
org.jboss.as.cli.impl.CommandContextImpl.interact(CommandContextImpl.java:1129)
at org.jboss.as.cli.impl.CliLauncher.main(CliLauncher.java:243)
at org.jboss.as.cli.CommandLineMain.main(CommandLineMain.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.jboss.modules.Module.run(Module.java:270)
at org.jboss.modules.Main.main(Main.java:294)
/
I don't see this in upstream. Do you? I'll check 7.1...
Thanks,
Alexey
11:26 a.m.
On 08/03/2012 05:53 PM, Alexey Loubyansky wrote:
On 07/27/2012 08:02 PM, Wolf-Dieter Fink wrote:
> #simple is
> //subsystem=security/security-domain=lbank:add(cache-type=default)/
>
> but how to know that "classic" must used?
> //subsystem=security/security-domain=lbank/authentication=/
> tab completition will not help, only if I type =classic: the tab
> completition will show commands otherwise not
This is for the security team to answer.
> I suppose that this should be correct, but it shows an error:
> EAP6
> /[standalone@localhost:9999 /]
>
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
> {
> "outcome" => "failed",
> "failure-description" => "JBAS014688: Wrong type for value.
> Expected [LIST] but was STRING",
> "rolled-back" => true
> }
> /
Looks like this version doesn't support simplified syntax for parameter
values, so try using complete DMR format, i.e.
[{"code"=>"UsersRoles", ...
> AS7.2 (upstream)
> /[standalone@localhost:9999 /]
>
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
> {
> "outcome" => "failed",
> "failure-description" => "JBAS014807: Management resource
'[
> (\"subsystem\" => \"security\"),
> (\"security-domain\" => \"lbank2\"),
> (\"authentication\" => \"classic\")
> ]' not found",
> "rolled-back" => true
> }/
The classic doesn't exist. It has to be added first, i.e.
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:add( ...
where you initialize the login-modules.
Looks like that AS7.2 include a fix and the
different messages are
confusing me.
The trick is:
/subsystem=security/security-domain=lbank2/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required}])
But if I add the module options:
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank2/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required,module-options=[{name=userProperties,value="ABC"}]}])
{
"failure-description" => [
"JBAS014798: Validation failed for login-modules",
"JBAS014688: Wrong type for module-options. Expected [OBJECT]
but was LIST"
],
"rolled-back" => true
}
How do I add th module-options as OBJECT?
The result should look like:
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:read-resource
{
"outcome" => "success",
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties")
]
}]}
}
XML:
/<security-domain name="lbank" cache-type="default">
<authentication>
<login-module code="UsersRoles"
flag="required">
<module-option name="usersProperties"
value="${jboss.server.config.dir}/lbank-users.properties"/>
<module-option name="rolesProperties"
value="${jboss.server.config.dir}/lbank-roles.properties"/>
<module-option name="password-stacking"
value="useFirstPass"/>
</login-module>
</authentication>
</security-domain>
1:07 p.m.
Just to complete the thread.
With AS7.2 (current upstream) the command will run successful with the
expression (note the \ quotes of {} )
/subsystem=security/security-domain=lbank/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required,module-options={usersProperties=$\{jboss.server.config.dir\}/lbank-users.properties,rolesProperties=$\{jboss.server.config.dir\}/lbank-roles.properties}}]
It will fail with former tags and EAP (7.1.3 not tested ATM)
Wolf
On 08/03/2012 06:26 PM, Wolf-Dieter Fink wrote:
On 08/03/2012 05:53 PM, Alexey Loubyansky wrote:
> On 07/27/2012 08:02 PM, Wolf-Dieter Fink wrote:
>> #simple is
>> //subsystem=security/security-domain=lbank:add(cache-type=default)/
>>
>> but how to know that "classic" must used?
>> //subsystem=security/security-domain=lbank/authentication=/
>> tab completition will not help, only if I type =classic: the tab
>> completition will show commands otherwise not
> This is for the security team to answer.
>
>> I suppose that this should be correct, but it shows an error:
>> EAP6
>> /[standalone@localhost:9999 /]
>>
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
>> {
>> "outcome" => "failed",
>> "failure-description" => "JBAS014688: Wrong type for
value.
>> Expected [LIST] but was STRING",
>> "rolled-back" => true
>> }
>> /
> Looks like this version doesn't support simplified syntax for parameter
> values, so try using complete DMR format, i.e.
[{"code"=>"UsersRoles", ...
>
>> AS7.2 (upstream)
>> /[standalone@localhost:9999 /]
>>
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
>> {
>> "outcome" => "failed",
>> "failure-description" => "JBAS014807: Management resource
'[
>> (\"subsystem\" => \"security\"),
>> (\"security-domain\" => \"lbank2\"),
>> (\"authentication\" => \"classic\")
>> ]' not found",
>> "rolled-back" => true
>> }/
> The classic doesn't exist. It has to be added first, i.e.
> [standalone@localhost:9999 /]
> /subsystem=security/security-domain=lbank/authentication=classic:add( ...
>
> where you initialize the login-modules.
Looks like that AS7.2 include a fix and the different messages are
confusing me.
The trick is:
/subsystem=security/security-domain=lbank2/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required}])
But if I add the module options:
[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank2/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required,module-options=[{name=userProperties,value="ABC"}]}])
{
"failure-description" => [
"JBAS014798: Validation failed for login-modules",
"JBAS014688: Wrong type for module-options. Expected [OBJECT]
but was LIST"
],
"rolled-back" => true
}
How do I add th module-options as OBJECT?
The result should look like:
/[standalone@localhost:9999 /]
/subsystem=security/security-domain=lbank/authentication=classic:read-resource
{
"outcome" => "success",
"code" => "UsersRoles",
"flag" => "required",
"module-options" => [
("usersProperties" => expression
"${jboss.server.config.dir}/lbank-users.properties"),
("rolesProperties" => expression
"${jboss.server.config.dir}/lbank-roles.properties")
]
}]}
}
XML:
/<security-domain name="lbank" cache-type="default">
<authentication>
<login-module code="UsersRoles"
flag="required">
<module-option name="usersProperties"
value="${jboss.server.config.dir}/lbank-users.properties"/>
<module-option name="rolesProperties"
value="${jboss.server.config.dir}/lbank-roles.properties"/>
<module-option name="password-stacking"
value="useFirstPass"/>
</login-module>
</authentication>
</security-domain>
_______________________________________________
jboss-as7-dev mailing list
jboss-as7-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
1:54 p.m.
Hi Wolf,
On 08/03/2012 03:07 PM, Wolf-Dieter Fink wrote:
Just to complete the thread.
With AS7.2 (current upstream) the command will run successful with the
expression (note the \ quotes of {} )
/subsystem=security/security-domain=lbank/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required,module-options={usersProperties=$\{jboss.server.config.dir\}/lbank-users.properties,rolesProperties=$\{jboss.server.config.dir\}/lbank-roles.properties}}]
It will fail with former tags and EAP (7.1.3 not tested ATM)
Yea, that works with the current master and branch 7.1 (future 7.1.3).
The difference is that module-option expressions are not supported in
the 7.1 branch (see PRODMGT-182 for details), but the CLI command to add
a security domain is the same.
I've tried adding a domain in EAP6 and after a few tries I've managed to
do it with the following commands:
./subsystem=security/security-domain=test:add(cache-type=default)
{
"outcome" => "success",
"response-headers" => {"process-state" =>
"reload-required"}
}
./subsystem=security/security-domain=test/authentication=classic:add(login-modules=[{"code"=>"UsersRoles","flag"=>"required","module-options"=>[("prop1"=>"value1"),("prop2"=>"value2")]}])
{
"outcome" => "success",
"response-headers" => {
"operation-requires-reload" => true,
"process-state" => "reload-required"
}
}
The above produces the following in standalone.xml:
<security-domain name="test" cache-type="default">
<authentication>
<login-module code="UsersRoles" flag="required">
<module-option name="prop1" value="value1"/>
<module-option name="prop2" value="value2"/>
</login-module>
</authentication>
</security-domain>
BTW, I also saw the failure to auto-complete the authentication=classic
part in AS 7.2 (works on EAP though). I'll take a look into it.
Cheers,
Stefan
Wolf
On 08/03/2012 06:26 PM, Wolf-Dieter Fink wrote:
> On 08/03/2012 05:53 PM, Alexey Loubyansky wrote:
>> On 07/27/2012 08:02 PM, Wolf-Dieter Fink wrote:
>>> #simple is
>>> //subsystem=security/security-domain=lbank:add(cache-type=default)/
>>>
>>> but how to know that "classic" must used?
>>> //subsystem=security/security-domain=lbank/authentication=/
>>> tab completition will not help, only if I type =classic: the tab
>>> completition will show commands otherwise not
>> This is for the security team to answer.
>>
>>> I suppose that this should be correct, but it shows an error:
>>> EAP6
>>> /[standalone@localhost:9999 /]
>>>
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
>>> {
>>> "outcome" => "failed",
>>> "failure-description" => "JBAS014688: Wrong type for
value.
>>> Expected [LIST] but was STRING",
>>> "rolled-back" => true
>>> }
>>> /
>> Looks like this version doesn't support simplified syntax for parameter
>> values, so try using complete DMR format, i.e.
[{"code"=>"UsersRoles", ...
>>
>>> AS7.2 (upstream)
>>> /[standalone@localhost:9999 /]
>>>
/subsystem=security/security-domain=lbank/authentication=classic:write-attribute(name=login-modules,value=[{code=UsersRoles,flag=required}])
>>> {
>>> "outcome" => "failed",
>>> "failure-description" => "JBAS014807: Management
resource '[
>>> (\"subsystem\" => \"security\"),
>>> (\"security-domain\" => \"lbank2\"),
>>> (\"authentication\" => \"classic\")
>>> ]' not found",
>>> "rolled-back" => true
>>> }/
>> The classic doesn't exist. It has to be added first, i.e.
>> [standalone@localhost:9999 /]
>> /subsystem=security/security-domain=lbank/authentication=classic:add( ...
>>
>> where you initialize the login-modules.
> Looks like that AS7.2 include a fix and the different messages are
> confusing me.
> The trick is:
>
>
/subsystem=security/security-domain=lbank2/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required}])
>
> But if I add the module options:
> [standalone@localhost:9999 /]
>
/subsystem=security/security-domain=lbank2/authentication=classic:add(login-modules=[{code=UsersRoles,flag=required,module-options=[{name=userProperties,value="ABC"}]}])
> {
> "failure-description" => [
> "JBAS014798: Validation failed for login-modules",
> "JBAS014688: Wrong type for module-options. Expected [OBJECT]
> but was LIST"
> ],
> "rolled-back" => true
> }
>
> How do I add th module-options as OBJECT?
>
>
> The result should look like:
> /[standalone@localhost:9999 /]
> /subsystem=security/security-domain=lbank/authentication=classic:read-resource
> {
> "outcome" => "success",
> "code" => "UsersRoles",
> "flag" => "required",
> "module-options" => [
> ("usersProperties" => expression
> "${jboss.server.config.dir}/lbank-users.properties"),
> ("rolesProperties" => expression
> "${jboss.server.config.dir}/lbank-roles.properties")
> ]
> }]}
> }
>
> XML:
> /<security-domain name="lbank" cache-type="default">
> <authentication>
> <login-module code="UsersRoles"
flag="required">
> <module-option name="usersProperties"
> value="${jboss.server.config.dir}/lbank-users.properties"/>
> <module-option name="rolesProperties"
> value="${jboss.server.config.dir}/lbank-roles.properties"/>
> <module-option name="password-stacking"
> value="useFirstPass"/>
> </login-module>
> </authentication>
> </security-domain>
>
>
>
>
>
> _______________________________________________
> jboss-as7-dev mailing list
> jboss-as7-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
_______________________________________________
jboss-as7-dev mailing list
jboss-as7-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
9:03 a.m.
On 07/27/2012 08:02 PM, Wolf-Dieter Fink wrote:
BTW the CLI tab completition crash:
//subsystem=security/security-domain=lbankx/authentication=(
Ah, because of the '(' after the '='. It's an unexpected syntax.
Shouldn't fail like this, of course.
Thanks,
Alexey
java.lang.IllegalArgumentException: The argument value is not
specified
for name: 'null'
at
org.jboss.as.cli.operation.impl.DefaultOperationRequestBuilder.addProperty(DefaultOperationRequestBuilder.java:113)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:208)
at
org.jboss.as.cli.operation.impl.DefaultOperationCandidatesProvider.getProperties(DefaultOperationCandidatesProvider.java:51)
at
org.jboss.as.cli.operation.OperationRequestCompleter.complete(OperationRequestCompleter.java:142)
at org.jboss.as.cli.CommandCompleter.complete(CommandCompleter.java:93)
at org.jboss.as.cli.impl.Console$Factory$1$1.complete(Console.java:96)
at org.jboss.jreadline.console.Console.complete(Console.java:809)
at org.jboss.jreadline.console.Console.read(Console.java:383)
at org.jboss.jreadline.console.Console.read(Console.java:221)
at org.jboss.as.cli.impl.Console$Factory$1.readLine(Console.java:166)
at
org.jboss.as.cli.impl.CommandContextImpl.interact(CommandContextImpl.java:1129)
at org.jboss.as.cli.impl.CliLauncher.main(CliLauncher.java:243)
at org.jboss.as.cli.CommandLineMain.main(CommandLineMain.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.jboss.modules.Module.run(Module.java:270)
at org.jboss.modules.Main.main(Main.java:294)
/
_______________________________________________
jboss-as7-dev mailing list
jboss-as7-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/jboss-as7-dev
4835
days inactive
4848
days old
8 comments
4 participants
participants (4)
-
Alexey Loubyansky -
Stefan Guilhen -
Tomaž Cerar -
Wolf-Dieter Fink