[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2569:
--------------------------------
Attachment: after_save.png
before_save.png
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
> Attachments: after_save.png, before_save.png
>
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM(/), BKS (/), Decision(/), Input (/)
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko commented on DROOLS-2569:
-------------------------------------
[~tari_manga] Hi, it is resolved for most combinations of connected nodes, however magnet points are not marshalled for connections that has either source or target node Text Annotation.
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM(/), BKS (/), Decision(/), Input (/)
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko reopened DROOLS-2569:
---------------------------------
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM(/), BKS (/), Decision(/), Input (/)
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2569:
--------------------------------
Description:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM(/), BKS (/), Decision(/), Input (/)
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
was:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM(/), BKS (/), Decision(/), Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM(/), BKS (/), Decision(/), Input (/)
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2569:
--------------------------------
Description:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM(/), BKS (/), Decision(/), Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
was:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM(/), BKS (/), Decision, Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM(/), BKS (/), Decision(/), Input
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2569:
--------------------------------
Description:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM(/), BKS (/), Decision, Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
was:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM(/), BKS, Decision, Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM(/), BKS (/), Decision, Input
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2569:
--------------------------------
Description:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM(/), BKS, Decision, Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
was:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM, BKS, Decision, Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM(/), BKS, Decision, Input
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2569:
--------------------------------
Description:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM, BKS, Decision, Input
- Target node
-- BKM(/), BKS(/), Decision (/), Annotation (x)
was:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM, BKS, Decision, Input
- Target node
-- BKM, BKS(/), Decision (/), Annotation (x)
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM, BKS, Decision, Input
> - Target node
> -- BKM(/), BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-2569) [DMN Designer] Marshalling of magnet positions
by Jozef Marko (Jira)
[ https://issues.jboss.org/browse/DROOLS-2569?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2569:
--------------------------------
Description:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM, BKS, Decision, Input
- Target node
-- BKM, BKS(/), Decision (/), Annotation (x)
was:
When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
[~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
h2. PR Acceptance test
In DMN Designer, change magnet position in:
- Source node
-- BKM, BKS, Decision, Input
- Target node
-- BKM, BKS, Decision (/), Annotation (x)
> [DMN Designer] Marshalling of magnet positions
> ----------------------------------------------
>
> Key: DROOLS-2569
> URL: https://issues.jboss.org/browse/DROOLS-2569
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Matteo Mortari
> Priority: Major
> Labels: drools-tools
>
> When attaching connectors to different magnets (other than "centre") re-opening a DMN diagram resets connections to the "centre" magnet. IDK if this is an issue with writing magnet positions to the XML or recreating the connections from the XML.
> [~tari_manga] could you please liaise with [~roger600] to understand where the issue is?
> h2. PR Acceptance test
> In DMN Designer, change magnet position in:
> - Source node
> -- BKM, BKS, Decision, Input
> - Target node
> -- BKM, BKS(/), Decision (/), Annotation (x)
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month
[JBoss JIRA] (DROOLS-3205) [DMN Designer][IE11] Missing Structure option
by Michael Anstis (Jira)
[ https://issues.jboss.org/browse/DROOLS-3205?page=com.atlassian.jira.plugi... ]
Michael Anstis commented on DROOLS-3205:
----------------------------------------
Sorry [~dadossan] would you mind taking a look ([~karreiro] can point you to the right place in the code).
> [DMN Designer][IE11] Missing Structure option
> ---------------------------------------------
>
> Key: DROOLS-3205
> URL: https://issues.jboss.org/browse/DROOLS-3205
> Project: Drools
> Issue Type: Bug
> Components: DMN Editor
> Affects Versions: 7.14.0.Final
> Reporter: Jozef Marko
> Assignee: Daniel José dos Santos
> Priority: Minor
> Labels: drools-tools
> Attachments: Screenshot from 2018-10-30 09-09-52.png
>
>
> The *manage custom data type* dialog misses the *Structure* option for the IE11, see the attached screenshot. Other browsers works fine.
--
This message was sent by Atlassian Jira
(v7.12.1#712002)
7 years, 1 month