August 2006 - jboss-user - Jboss List Archives

[Security & JAAS/JBoss] - Re: retry fails with form based authentication woth custom l

by anil.saldhana＠jboss.com

Don't mess with the form auth setup (do not deal with form login page or error page via redirects etc in your application). Your job is to just configure it in web.xml or change the look and feel of the login/error pages. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965800#3965800 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965800

19 years, 8 months

1
0
0 / 0

[JBoss Seam] - Re: Can I forace a method to be invoked everytime a page is

by c_eric_ray

will check it out. thanks. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965799#3965799 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965799

19 years, 8 months

1
0
0 / 0

[JBoss Portal] - Re: Error

by rali.genova＠jboss.com

make sure you have the hsqldb-ds.xml in your deploy directory, delete the default/data, default/tmp, default/work and restart. The switching between DBs messed up the deployment. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965797#3965797 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965797

19 years, 8 months

1
0
0 / 0

[Security & JAAS/JBoss] - Re: JACC on the fly method permission changes not reflecting

by anil.saldhana＠jboss.com

Replace SecurityInterceptor with a combo of "JaasAuthenticationInterceptor" and "JaccAuthorizationInterceptor" with the same package as before. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965796#3965796 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965796

19 years, 8 months

1
0
0 / 0

[JBoss Seam] - Re: Can I forace a method to be invoked everytime a page is

by thomas.heute＠jboss.com

Did you look at pages.xml ? Look at the blog example. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965795#3965795 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965795

19 years, 8 months

1
0
0 / 0

[Security & JAAS/JBoss] - Re: JACC on the fly method permission changes not reflecting

by anil.saldhana＠jboss.com

What is the container configuration being applied for your EJB from standardjboss.xml? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965794#3965794 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965794

19 years, 8 months

1
0
0 / 0

[JBoss Seam] - Re: EntityManager: For newbies or to close gaps in your know

by bfo81

So finally, I found a solution for my problem: I have a bean that has not only methods writing to the database, but also provide some other stuff. And I don't want to have auto-flushes after the latter. You should prevent EJB from auto-flushing and write to the database explicitely when you need it by em.flush(). There are several ways to switch auto-flushing off: * @Begin(flushMode=FlushModeType.MANUAL) | | But this is still a feature from the future (i.e. only in the CVS version) and should not be applied in production environments. | | | * Try to set the flush mode on the Hibernate Session and manually perform transactions ... and tell me how you succeeded (i.e. this could work but you better don't waste your time with this unless you're a real expert ;)). | | | * @TransactionManagement(TransactionManagementType.BEAN) | | Usually Beans have Container Managed Transactions. But with this annotation you tell EJB3 that you want to care about transactions yourself (User Managed Transactions). Well, and this is what you also have to do then, of course. Back to stoneage - don't do this ;). | | | * @TransactionAttribute | | As a default all methods have the transaction attribute REQUIRED. That means they are all wrapped by a transaction. If you want to change this you can use the transaction attribute NOT_SUPPORTED (btw: there are even more types, for the sake of completeness). There are two possibilities: | | - To prevent a single method from being run in a transaction (which will lead to auto-flushes) annotate it with @TransactionAttribute(TransactionAttributeType.NOT_SUPPORTED). If you have multiple methods like this you need multiple annotations ;). | | - Or annotate the class itself with @TransactionAttribute(TransactionAttributeType.NOT_SUPPORTED) (all methods will "inherit" this). Then restore the default behaviour to some special methods (e.g. store, delete) by annotating them with @TransactionAttribute(TransactionAttributeType.REQUIRED) | | Depends on what is shorter for you. I annotated my class with NOT_SUPPORTED and the store and delete method with REQUIRED. That's only three annotations... nice :). View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965793#3965793 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965793

19 years, 8 months

1
0
0 / 0

[JBoss Seam] - Re: @RequestParameter value become null in conversation sfsb

by gus888

Hi Bfo81, Thank you very much for your detailed explanation. Yes, you exactly answered my question. Thanks a lot. My second question is whether it is possible to improve conversation SFSB functionality in the future to save the code: "someParamCopy = someParam;" in @Begin method. For example, when click <h:commandLink value="Begin" action="#{testBean.begin}"> | <f:param name="someParam" value="1"/> | </h:commandLink>the conversation SFSB will hold the "someParam" param in session bean until call @End end(). The conversation SFSB should look like: @Stateful | @Scope(CONVERSATION) | @Name("testBean") | public class TestBean implements Test { | | @RequestParameter | private String someParam; | | private String someParamCopy; | | @Begin | public String begin() { | //someParamCopy = someParam; save the code | ... | } | | @End | public String end() { | someParam // have the value 1 | } | } But, currently your idea is best to solve my first question. Thank you. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965792#3965792 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965792

19 years, 8 months

1
0
0 / 0

[JBoss Portal] - Re: org.jboss.portal.portlet.container.PortletInitialization

by klsateesh

Hi, When i point my browser to http://localhost:8080/portal i see the portlet which i have deployed but with the following error.. Title : Cannot Render Object not found AssessSamplePortletInstance Do i need to have the JAR File in WEB-INF/lib . Right now i have the Required classes in the WEB-INF/classes. In a normal web app it doesn't matter as they are in the classpath. As this is a ClassCastException rather than NoClassDefFound it is picking up the Class but not sure to which class it is trying to cast ?? Thanks Sateesh View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965791#3965791 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965791

19 years, 8 months

1
0
0 / 0

[JBoss Seam] - dynamic JSF - second try

by mrohad

is it possible to add JSF Input box dyanmicly? for example I've input box , button value="OR" and I would like to add another input on each click on OR I know how to do it with JavaScript , how do I do it with JSF? is it possible to use it with seam? to relate each new input to a getter/setter(via @In and @out) View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=3965790#3965790 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=3965790

19 years, 8 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user August 2006