[jboss-user] [JBoss Messaging] - Re: XARecovery: setting the provider name

I couldn't find appropriate proeprty to delay the intiial RM startup Tim. <properties depends="arjuna" name="recoverymanager"> | <!-- | Properties used only by the RecoveryManager. | --> | <!-- | Periodic recovery settings. | Time values in this section are in seconds. | --> | <!-- | Interval in seconds between initiating the periodic recovery modules. | Default is 120 seconds. | --> | <property | name="com.arjuna.ats.arjuna.recovery.periodicRecoveryPeriod" value="120"/> | <!-- | Interval in seconds between first and second pass of periodic recovery. | Default is 10 seconds. | --> | <property | name="com.arjuna.ats.arjuna.recovery.recoveryBackoffPeriod" value="10"/> | <!-- | Periodic recovery modules to use. Invoked in sort-order of names. | --> | <property | name="com.arjuna.ats.arjuna.recovery.recoveryExtension1" value="com.arjuna.ats.internal.arjuna.recovery.AtomicActionRecoveryModule"/> | <property | name="com.arjuna.ats.arjuna.recovery.recoveryExtension2" value="com.arjuna.ats.internal.txoj.recovery.TORecoveryModule"/> | <!-- | Expired entry removal | --> | <!-- | Expiry scanners to use (order of invocation is random). | Names must begin with "com.arjuna.ats.arjuna.recovery.expiryScanner" | --> | <property | name="com.arjuna.ats.arjuna.recovery.expiryScannerTransactionStatusManager" value="com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner"/> | <!-- | Interval, in hours, between running the expiry scanners. | This can be quite long. The absolute value determines the interval - | if the value is negative, the scan will NOT be run until after one | interval has elapsed. If positive the first scan will be immediately | after startup. Zero will prevent any scanning. | Default = 12 = run immediately, then every 12 hours. | --> | <property | name="com.arjuna.ats.arjuna.recovery.expiryScanInterval" value="12"/> | <!-- | Age, in hours, for removal of transaction status manager item. | This should be longer than any ts-using process will remain running. | Zero = Never removed. Default is 12. | --> | <property | name="com.arjuna.ats.arjuna.recovery.transactionStatusManagerExpiryTime" value="12"/> | <!-- | Use this to fix the port on which the TransactionStatusManager listens, | The default behaviour is to use any free port. | --> | <property | name="com.arjuna.ats.arjuna.recovery.transactionStatusManagerPort" value="0"/> | <!-- | Properties used only by the RecoveryManager. | --> | <!-- | Periodic recovery settings. | Time values in this section are in seconds. | --> | <!-- | Interval in seconds between initiating the periodic recovery modules. | Default is 120 seconds. | --> | <property | name="com.arjuna.ats.arjuna.recovery.periodicRecoveryPeriod" value="120"/> | <!-- | Interval in seconds between first and second pass of periodic recovery. | Default is 10 seconds. | --> | <property | name="com.arjuna.ats.arjuna.recovery.recoveryBackoffPeriod" value="10"/> | <!-- | Periodic recovery modules to use. Invoked in sort-order of names. | --> | <property | name="com.arjuna.ats.arjuna.recovery.recoveryExtension1" value="com.arjuna.ats.internal.arjuna.recovery.AtomicActionRecoveryModule"/> | <property | name="com.arjuna.ats.arjuna.recovery.recoveryExtension2" value="com.arjuna.ats.internal.txoj.recovery.TORecoveryModule"/> | <property | name="com.arjuna.ats.arjuna.recovery.recoveryExtension3" value="com.arjuna.ats.internal.jta.recovery.arjunacore.XARecoveryModule"/> | <!-- | Expired entry removal | --> | <!-- | Expiry scanners to use (order of invocation is random). | Names must begin with "com.arjuna.ats.arjuna.recovery.expiryScanner" | --> | <property | name="com.arjuna.ats.arjuna.recovery.expiryScannerTransactionStatusManager" value="com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner"/> | <!-- | Interval, in hours, between running the expiry scanners. | This can be quite long. The absolute value determines the interval - | if the value is negative, the scan will NOT be run until after one | interval has elapsed. If positive the first scan will be immediately | after startup. Zero will prevent any scanning. | Default = 12 = run immediately, then every 12 hours. | --> | <property | name="com.arjuna.ats.arjuna.recovery.expiryScanInterval" value="12"/> | <!-- | Age, in hours, for removal of transaction status manager item. | This should be longer than any ts-using process will remain running. | Zero = Never removed. Default is 12. | --> | <property | name="com.arjuna.ats.arjuna.recovery.transactionStatusManagerExpiryTime" value="12"/> | <!-- | Use this to fix the port on which the TransactionStatusManager listens, | The default behaviour is to use any free port. | --> | <property | name="com.arjuna.ats.arjuna.recovery.transactionStatusManagerPort" value="0"/> | </properties> View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4028437#... Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&a...