Author: smukhina Date: 2009-05-11 12:43:34 -0400 (Mon, 11 May 2009) New Revision: 15212 Added: branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml Removed: branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml Log: https://jira.jboss.org/jira/browse/JBDS-717 merged changes from trunk are added to the corresponding branch Deleted: branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml =================================================================== --- branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml 2009-05-11 16:42:46 UTC (rev 15211) +++ branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml 2009-05-11 16:43:34 UTC (rev 15212) @@ -1,1262 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" -"http://www.docbook.org/xml/4.3/docbookx.dtd" - -[ -<!ENTITY introduction SYSTEM "modules/introduction.xml"> -<!ENTITY projects SYSTEM "modules/projects.xml"> -<!ENTITY editors SYSTEM "modules/editors.xml"> -<!ENTITY modules SYSTEM "modules/modules.xml"> -<!ENTITY code_generation SYSTEM "modules/code_generation.xml"> -<!ENTITY config_file_debugger SYSTEM "modules/config_file_debugger.xml"> -<!ENTITY page_links_recognizer SYSTEM "modules/page_links_recognizer.xml"> -<!ENTITY project_verification SYSTEM "modules/project_verification.xml"> -<!ENTITY rel_resources_links SYSTEM "modules/rel_resources_links.xml"> - -<!ENTITY seamlink "../../seam/html_single/index.html"> -<!ENTITY aslink "../../as/html_single/index.html"> -<!ENTITY esblink "../../esb_ref_guide/html_single/index.html"> -<!ENTITY gsglink "../../GettingStartedGuide/html_single/index.html"> -<!ENTITY hibernatelink "../../hibernatetools/html_single/index.html"> -<!ENTITY jbpmlink "../../jbpm/html_single/index.html"> -<!ENTITY jsflink "../../jsf/html_single/index.html"> -<!ENTITY jsfreflink "../../jsf_tools_ref_guide/html_single/index.html"> -<!ENTITY jsftutoriallink "../../jsf_tools_tutorial/html_single/index.html"> -<!ENTITY strutsreflink "../../struts_tools_ref_guide/html_single/index.html"> -<!ENTITY strutstutoriallink "../../struts_tools_tutorial/html_single/index.html"> -<!ENTITY migrationlink "../../Exadel-migration/html_single/index.html"> - -]><book xmlns:diffmk="http://diffmk.sf.net/ns/diff"> - <bookinfo> - <title>Struts Tools Reference Guide</title> - - <author><firstname>Anatoly</firstname><surname>Fedosik</surname></author> - <author><firstname>Olga</firstname><surname>Chikvina</surname></author> - <author&gt;&lt;firstname&gt;Svetlana&lt;/firstname&gt;&lt;surname&gt;Mukhina&lt;/surname&gt;&lt;email&gt;smukhina(a)exadel.com&lt;/email&gt;&lt;/author&gt; - - <pubdate>April 2008</pubdate> - <copyright> - <year>2007</year> - <year><diffmk:wrapper diffmk:change="changed">2009</diffmk:wrapper></year> - <holder><diffmk:wrapper diffmk:change="changed">JBoss, a division of Red Hat</diffmk:wrapper></holder> - </copyright> - <releaseinfo><diffmk:wrapper diffmk:change="changed"> - Version: 3.0.0.GA - </diffmk:wrapper></releaseinfo> - -<abstract> - <title></title> - <para> - <ulink url="http://download.jboss.org/jbosstools/nightly-docs/en/struts_too... version</ulink> - </para> -</abstract> - - - </bookinfo> - - <toc></toc> - - -<chapter id="intoduction" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/introduction.xml"> - <?dbhtml filename="introduction.html"?> - - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Introduction</title> - - <para>If you prefer to develop web applications using Struts technology JBoss Tools also meet - your needs. The professional developer toolset provides all necessary editors and wizards - for creating Struts resources that enhances the process of building high-quality web - applications.</para> - <note> - <title>Note:</title> - <para>Note that JBoss Tools support the Struts 1.1, 1.2.x versions.</para> - </note> - - <para>In this guide you will learn how to take advantage of Struts support that <property moreinfo="none">JBoss Tools</property> - provide.</para> - - <section id="struts_key_features"> - <title>Key Features of Struts Tools</title> - - <para>For a start, we propose you to look through the table of main features of Struts - Tools:</para> - - <table> - - <title>Key Functionality for Struts Tools</title> - <tgroup cols="3"> - - <colspec align="left" colnum="1" colwidth="2*"></colspec> - <colspec colnum="2" colwidth="4*"></colspec> - <colspec align="left" colnum="3" colwidth="2*"></colspec> - - <thead> - <row> - <entry>Feature</entry> - <entry>Benefit</entry> - <entry>Chapter</entry> - </row> - </thead> - <tbody> - <row> - <entry><para>Struts Support</para></entry> - <entry><para>Step-by-step wizards for creating a new struts project with a number - of predefined templates, importing existing ones and adding struts - capabilities to non-struts web projects.</para></entry> - <entry> - <link linkend="projects">struts support</link> - </entry> - </row> - - <row> - <entry><para>Support for Struts Configuration File</para></entry> - <entry><para>Working on file using three modes: diagram, tree and source. - Synchronization between the modes and full control over the code. Easy - moving around the diagram using the Diagram Navigator. Working with - struts projects that have multiple modules. Possibility to use Struts - configuration file debugger allowing to set break points on struts - diagram and then launch the server in debug mode.</para></entry> - <entry> - <link linkend="struts_config_editor">graphical editor for struts</link> - <link linkend="config_file_debugger">configuration file debugger</link> - </entry> - </row> - - <row> - <entry><para>Support for Struts modules</para></entry> - <entry><para>A Struts module (struts-config.xml) is automatically created while - creating a new project. There is also possibility to add new ones or edit - already existing modules in your existing project or while importing Struts project.</para></entry> - <entry> - <link linkend="modules">modules</link> - </entry> - </row> - - <row> - <entry><para>Verification and Validation</para></entry> - <entry><para>All occuring errors will be immediately reported by verification - feature, no matter in what view you are working. Constant validation and - errors checking allows to catch many of the errors during development - process that significantly reduces development time.</para></entry> - <entry> - <link linkend="project_verification">verification and validation</link> - </entry> - - </row> - </tbody> - </tgroup> - </table> - - </section> - - <section> - <title>Other relevant resources on the topic</title> - - <para>All JBoss Developer Studio/JBoss Tools documentation you can find <ulink url="http://docs.jboss.org/tools/">here</ulink>.</p... - <para>The latest documentation builds are available <ulink url="http://download.jboss.org/jbosstools/nightly-docs/">her... - - </section> - -</chapter> - - -<chapter id="projects" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/projects.xml"> - <?dbhtml filename="projects.html"?> - - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Projects</title> - - <para>JBoss Tools provide the following functionality when working with Struts:</para> - - <itemizedlist> - <listitem> - <para>Create new <property moreinfo="none">Struts projects</property></para> - </listitem> - <listitem> - <para>Import (open) existing Struts projects. You can import any project - structure</para> - </listitem> - <listitem> - <para>Add <property moreinfo="none">Struts capabilities</property> to any existing Eclipse - project</para> - </listitem> - <listitem> - <para>Import and add Struts capabilities to any existing project created outside - Eclipse.</para> - </listitem> - </itemizedlist> - <para>Now, we'll focus on all these points more fully.</para> - - <section id="CreatingANewStrutsProjec745t"> - - <title>Creating a New Struts Project</title> - - - <para>JBoss Tools provides a New Struts Project Wizard that radically simplifies the process - for getting started with a new Struts project. You just need to follow these steps:</para> - <itemizedlist> - <listitem> - <para>Select<emphasis> - <property moreinfo="none">File &gt; New &gt; Project...</property> - </emphasis> from the menu bar. Then, select <emphasis> - <property moreinfo="none">JBoss Tools Web &gt; Struts &gt; Struts Project</property> - </emphasis> in this dialog box. Click <emphasis> - <property moreinfo="none">Next</property>: </emphasis></para> - </listitem> - </itemizedlist> - <figure float="0"> - <title>Selecting Struts Wizard</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_2.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <itemizedlist> - <listitem> - <para>On this form, provide the <property moreinfo="none">Project Name</property>. You can also - select where to create the project or use the default path.</para> - <para>Next to <property moreinfo="none">Struts Environment</property> set which Struts version to - use.</para> - </listitem> - </itemizedlist> - - <figure float="0"> - <title>Creating Struts Project</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_3.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <tip> - <title>Tip:</title> - <para>Don't put spaces in project names since some OS could experience problems - with their processing and searching these files.</para> - </tip> - - <para>You can select the KickStart template, then the project created will include a simple - Hello World type application that is ready to run.</para> - - <figure float="0"> - <title>Choosing Struts Template </title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_3_1.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <itemizedlist> - <listitem> - <para>Next, you register this application with the current servlet container defined - for your workspace (JBoss AS, by default) in order to allow you to test your - application more easily while still developing it. A new entry will be added in - the servlet container configuration file to enable running the application - in-place (called null deployment or link deployment). Uncheck the <emphasis role="italic"> - <property moreinfo="none">"Target Server"</property> - </emphasis> check box if for some reason you don't want to register - your application at this point.</para> - </listitem> - </itemizedlist> - <figure float="0"> - <title>Registering The Project at Server</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_4.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <itemizedlist> - <listitem> - <para>On the next form, you can select the TLD files to include in this - project:</para> - </listitem> - </itemizedlist> - <figure float="0"> - <title>Selecting Tag Libraries</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_5.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>After the project is created, you should have the following project structure (if you - used the KickStart template):</para> - - <figure float="0"> - <title>Project Structure</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_6.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <tip> - <title>Tip:</title> - <para>If you want to hide the jar files from Web App Libraries in view, select the - down-pointing arrow in the upper right corner, select - <emphasis>Filters...</emphasis>, check the box next to Name filter patterns - (matching names will be hidden), and type *.jar into the field. Then, click OK. - </para> - </tip> - </section> - <section id="ImportingAnExistingStrutsProjectWithAnyStructure9653"> - - <title>Importing an Existing Struts Project with Any Structure</title> - - <para>For detailed information on migration projects to JBoss Developer Studio see <ulink url="../../Exadel-migration/html_single/index.html">Migration Guide</ulink>.</para> - - </section> - <section id="AddingStrutsCapabilityToAnExistingWebApplication532"> - - <title>Adding Struts Capability to an Existing Web Application</title> - - <para>Here, we'll consider how to add Struts functionality (Struts libraries, tag - libraries and a Struts configuration file) to any existing Web application project in - your Eclipse workspace.</para> - - <para>By adding a Struts Nature to your project, you can now edit files using JBoss Tools - editors, such as the <link linkend="struts_config_editor">Struts configuration - editor</link> and the JBoss Tools JSP editor. To take advantage of this just right-click - the project and select <emphasis> - <property moreinfo="none">JBoss Tools &gt; Add Struts Capabilities</property> - </emphasis> from the context menu. This will start the process of adding all necessary - libraries and files to make a Web Struts project from your one.</para> - - <figure float="0"> - <title>Adding Struts Capabilities</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_7.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>In the wizard you should point to location of your deployment descriptor file web.xml - and name of the project.</para> - - <figure float="0"> - <title>Choosing Project Location</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_8.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>After hitting <emphasis> - <property moreinfo="none">Next</property>, </emphasis> you will see the following screen. This - screen simply means that you need to add at least one Struts module to your project to - make this project a Struts project. Adding a Struts module means that a new - struts-config.xml will be added to your project and registered in the web.xml file. In - addition, all required Struts libraries will be added. To add a Struts module, select - the <emphasis> - <property moreinfo="none">Add Struts Support</property> - </emphasis> button.</para> - <figure float="0"> - <title>Project Modules</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_9.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>Here you can select what Struts <property moreinfo="none">Version</property>, <property moreinfo="none">Servlet - Class</property>, <property moreinfo="none">URL Pattern</property> and <property moreinfo="none">TLD</property>s to add - to this project.</para> - - <figure float="0"> - <title>Selecting Struts Support Options</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_10.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>When done, you will see the default Struts module configuration information. See how - to Edit <link linkend="modules">Struts modules</link>.</para> - - <figure float="0"> - <title>Project Configuration Information</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_11.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>On the last screen you can set the different folders for your project as well as - register this application with a servlet container. If you want the libraries (.jar - files) will be automatically added to your project, click on the checkbox <emphasis> - <property moreinfo="none">Add Libraries</property>.</emphasis></para> - - <figure float="0"> - <title>Registering the Project at Server</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_12.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>When done, you can open end edit the struts-config.xml file using usefull Struts - configuration file editor provided by JBDS. (The Struts configuration is shown below in - the Tree viewer).</para> - - <figure float="0"> - <title>Struts-config.xml File</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_13.png" scale="75"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - -</chapter> - - -<chapter id="editors" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/editors.xml"> - <?dbhtml filename="editors.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Struts Tools</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Editors</title> - <para>In this chapter we'll introduce you to featured graphical editors for specific - Struts files such as Struts Configuration files, Tiles files and Struts Validation files.</para> - <section id="struts_config_editor"> - - <title>Graphical Editor for Struts Configuration Files</title> - <para>First, let's dwell on the Struts Configuration file editor.</para> - <para>This editor has three views with different representation of <emphasis> - <property moreinfo="none">struts-config.xml</property>: </emphasis>Diagram, Tree and Source. The - views can be selected via the tabs at the bottom of the editor. Any changes made in one - view are immediately visible when you switch to any other view.</para> - - <para>Now, we'll consider every view in more detail.</para> - <section id="StrutsDiagramMode453"> - - <title>Diagram View</title> - - <para>The Diagram view graphically displays the Web flow of the application defined in - the Struts configuration file.</para> - - <figure float="0"> - <title>Diagram View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_14.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>The Diagram view allows to edit navigation in your Struts application. Just by - right-clicking anywhere on the diagram, you can use a context menu to create the - building blocks of a Struts application:</para> - <itemizedlist> - <listitem> - <para>Actions</para> - </listitem> - <listitem> - <para>Global forwards</para> - </listitem> - <listitem> - <para>Global exceptions</para> - </listitem> - <listitem> - <para>JSP Pages</para> - </listitem> - </itemizedlist> - - <figure float="0"> - <title>Diagram Context Menu</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_15.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>Along the upper-left side of the editor is a stack of seven icons for changing the - behavior of the cursor in the diagram. </para> - - <figure float="0"> - <title>Editor Icons</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_16.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>The first icon switches to the default regular selection cursor, the second to the - marquee selection cursor and the third to the new connection cursor. The last four - icons switch the cursor to an insert cursor for each type of Struts build block - listed above (and in the order listed).</para> - - <para>For instance, clicking on the first of these four icons (the one with the gears) - will switch the cursor to insert actions. Clicking anywhere in the diagram with this - cursor has the same effect as right-click and selecting <emphasis> - <property moreinfo="none">Add &gt; Action...</property> - </emphasis> from the context menu with the regular cursor active. It's just - more efficient to use this cursor if you're adding more than one action at - once.</para> - - - </section> - <section id="StrutsTreeMode42"> - - <title>Tree View</title> - - <para>The Tree view represents the different elements of the Struts application that are - organized into functional categories on the left-hand side and a form for editing - the properties of currently selected items on the right-hand side.</para> - - <figure float="0"> - <title>Tree View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_17.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>You can also right-click on any node in the category tree and perform appropriate - operations through a context menu. For instance, by right-clicking on the - action-mappings category node, you can add new actions to the application.</para> - - <figure float="0"> - <title>Tree Context Menu</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_18.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section id="StrutsSourceMode9655"> - - <title>Source View</title> - - <para>In the Source view, you have complete editing control of the underlying XML - coding.</para> - - <figure float="0"> - <title>Source View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_19.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>When working in Source view, you always have all the following features available:</para> - <itemizedlist> - <listitem> - <para>Content Assist</para> - </listitem> - <listitem> - <para>Open On Selection</para> - </listitem> - <listitem> - <para>File Folding</para> - </listitem> - </itemizedlist> - <para>You can take advantage of <ulink url="../../jsf/html_single/index.html#CodeAssistAndDynamicCodeAssist42BasedOnProjectData">code assist</ulink>.</para> - <figure float="0"> - <title>Code Assist</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_20.png" scale="85"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>The editor will also immediately flag any errors.</para> - - <figure float="0"> - <title>Errors in Source View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_21.png" scale="85"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>Finally, you can use the Outline view with the editor to easily navigate through - the file.</para> - - <figure float="0"> - <title>Outline View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_22.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>Find more information about editor features <ulink url="../../jsf/html_single/index.html#editors_features">here</ulink>.</para> - </section> - </section> - - <section id="GraphicalEditorForTilesFiles132"> - - <title>Graphical Editor for Tiles Files</title> - <para>Here, you'll know how to make use of the special graphical editor for Tiles configuration files.</para> - <para>The editor has three main views: Tree, Diagram and Source. - The views can be selected via the tabs at the bottom of the editor. Any changes made in - one view are immediately visible when you switch to any other view.</para> - - <para>Before we consider each view of the editor, let's look at the way of creating new Tiles files.</para> - <section id="CreateNewTilesFile1422"> - - <title>Create New Tiles File</title> - - <para>To create new Tiles files, right click any folder and select <emphasis> - <property moreinfo="none">New &gt; Tiles File</property>. </emphasis></para> - <figure float="0"> - <title>Creating a New Tiles File</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_23.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section id="StrutsTreeView896"> - - <title>Tree View</title> - - <para>The Tree view represents the different elements of the Tiles file that are - organized into functional categories on the left-hand side and a form for editing - the properties of currently selected items on the right-hand side.</para> - <figure float="0"> - <title>Tree View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_24.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>To edit the file, simply right click any node and select among the available - actions.</para> - <figure float="0"> - <title>Editing in Tiles Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_25.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section id="StrutsDiagramView4643"> - - <title>Diagram View</title> - - <para>The Diagram view allows you to create complex Tiles files in the form of a - diagram.</para> - <figure float="0"> - <title>Diagram Mode</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_26.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>To create new definitions, simply right click anywhere in the diagram.</para> - <figure float="0"> - <title>Creating New Definition</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_27.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>You can also use the Diagram toolbar to make editing easier.</para> - <figure float="0"> - <title>Diagram Toolbar</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_28.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para> It contains four icons for changing the cursor state. The first one is the - default cursor state for selecting existing nodes. The second icon is marquee - selector. The third is used for creating new connections and the last one is for - adding definition template to the content.</para> - </section> - <section id="StrutsSource75"> - - <title>Source</title> - - <para>The other view of the <property moreinfo="none">Tiles editor</property> is the Source view that - gives you full control over the source. Any changes here will immediately appear in - other modes when you switch to them.</para> - - <para>When working in Source view, you always have all following features available:</para> - <itemizedlist> - <listitem> - <para>Content Assist</para> - </listitem> - <listitem> - <para>Open On Selection</para> - </listitem> - </itemizedlist> - - <figure float="0"> - <title>Source View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_29.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para><ulink url="../../jsf/html_single/index.html#CodeAssistAndDynamicCodeAssist42BasedOnProjectData">Code - assist</ulink> is available in the Source mode.</para> - <figure float="0"> - <title>Code Assist</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_30.png" scale="85"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>Any errors are immediately reported as shown below:</para> - <figure float="0"> - <title>Errors Reporting</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_31.png" scale="75"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>You can also use the Outline view together with the editor's Source mode. - It provides an easier navigation through the file.</para> - <figure float="0"> - <title>Outline View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_32.png" scale="85"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - </section> - - <section id="GraphicalEditorForStrutsValidationFiles86"> - - <title>Graphical Editor for Struts Validation Files</title> - - <para>Providing full support for development Struts applications JBoss Tools comes with a - visual validation editor. To open the editor double-click on the validation file or if you don't have it create a new one.</para> - - <para>To create a new validation file, right click any folder in - Project Explorer and select <emphasis> - <property moreinfo="none">File &gt; New &gt; Other...</property> - </emphasis>from the context menu and then <emphasis> - <property moreinfo="none">JBoss Tools Web &gt; Struts &gt; Validation File</property>. </emphasis></para> - <figure float="0"> - <title>Creating New Validation File</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_33.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>The validation editor works with five modes: Formsets, Validators, Constants and - standard Tree and Source that you can easily switch over using tabs at the bottom of the - editor.</para> - <para>The Formsets view shows forms and their elements on the left side and the dialogue for - defining their validation rules on the right side.</para> - <figure float="0"> - <title>Formsets View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_34.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>The Constants view let you set constant values for your validation rules.</para> - <figure float="0"> - <title>Constansts View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_35.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>The validation file can also be viewed in a Tree view.</para> - <figure float="0"> - <title>Tree View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_36.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>At any point you have full control over the source by switching to the Source view. - Any editing in this view will immediately be available in other views of the editor.</para> - <figure float="0"> - <title>Source View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_37.png" scale="85"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>You can also open your own custom or Struts-standard <emphasis> - <property moreinfo="none">validation-rules.xml</property> - </emphasis> file.</para> - <para>The Validators view shows the validation rules for a selected validator. You can of - course add your own rules.</para> - <figure float="0"> - <title>Validators View</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_38.png" scale="75"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>Here are the validation rules shown in the Source mode.</para> - <figure float="0"> - <title>Validation Rules</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_39.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> -</chapter> - - -<chapter id="modules" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/modules.xml"> - <?dbhtml filename="modules.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Struts Tools</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Modules</title> - - <para>JBoss Tools support working with Struts projects that have - multiple modules. You can easily do the following:</para> - <itemizedlist> - <listitem> - <para>Add new modules</para> - </listitem> - <listitem> - <para>Edit modules for an existing project or during Struts project - import</para> - </listitem> - </itemizedlist> - <para>Now, let's discuss this functionality in more detail.</para> - <section id="WhenImportingAStrutsProject432"> - - <title>When Importing a Struts Project</title> - - <para>During Struts project import, if the project has multiple modules, you - will see a screen with all existing modules. You can select each - module and edit its details.</para> - - <figure float="0"> - <title>Configuring Project Modules</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_40.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section id="EditingModulesInAnExistingProject1"> - - <title>Editing Modules in an Existing Project</title> - <para>To edit modules in an existing project, right click the project and - select <emphasis> - <property moreinfo="none">JBoss Tools &gt; Modules Configuration</property>. - </emphasis></para> - <figure float="0"> - <title>Choosing Modules Configuration</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_41.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>You will see the same screen as above where you will be able to select - a module and edit its details.</para> - <figure float="0"> - <title>Modules Configuration</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_42.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> - <section id="AddingNewModules1"> - - <title>Adding New Modules</title> - - <para>Adding a new module is very simple. First switch to Web Project view. - Expand your project to the Configuration folder. Under that folder - you should see the current modules. Right click on Configuration and - select <emphasis> - <property moreinfo="none">New &gt; Struts Config</property>. </emphasis></para> - <figure float="0"> - <title>Adding New Modules</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_43.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>You will see the screen below. You can specify a new module name and - also add the new Struts configuration file to web.xml file.</para> - <figure float="0"> - <title>Adding New Modules</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_44.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - </section> -</chapter> - - -<chapter id="code_generation" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/code_generation.xml"> - <?dbhtml filename="code_generation.html"?> - - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Struts Tools</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Code Generation</title> - - <para>JBoss Tools comes with a <property moreinfo="none">code generation</property> - feature. You can generate stub code for Struts Actions, FormBeans, Forwards - and Exceptions.</para> - - <para>The code generation that JBoss tooling provides is based on Velocity templates - which can be modified for your use. The templates are located at <emphasis> - <property moreinfo="none"> {JBossStudioHome} &gt; templates &gt; - codegeneration</property>. </emphasis></para> - - <para>There are a number of ways to invoke code generation. One is simply - right-clicking the Struts diagram and selecting <emphasis> - <property moreinfo="none">Generate Java Code....</property> - </emphasis></para> - - <figure float="0"> - <title>Selecting Generate Java Code</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_45.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>On this screen you can select for which elements to generate code. If you - select Next you will be able to specify more options for each of the - categories you selected.</para> - - <figure float="0"> - <title>Generate - Step 1</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_46.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <tip> - <title>Tip:</title> - <para>Please be careful not to override your existing files.</para> - </tip> - - <para>When generation is complete, a result window will appear letting you know how - many classes were generated:</para> - - <figure float="0"> - <title>Generation Finished</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_47.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>You don't always have to generate code for all elements at once. You - can invoke generation for just an individual Struts artifact as well. - Right-click an element on the diagram of the Struts configuration file and - select <emphasis> - <property moreinfo="none">Generate Java Code...</property> - </emphasis> from the context menu.</para> - - <figure float="0"> - <title>Generation For Individual Struts Artifact</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_48.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - - <para>The same can be done from within the Tree viewer for the editor of the Struts - configuration file.</para> - - <figure float="0"> - <title>Generation in Struts Config Editor</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_49.png"></imagedata> - </imageobject> - </mediaobject> - </figure> -</chapter> - -<chapter id="config_file_debugger" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/config_file_debugger.xml"> - <?dbhtml filename="config_file_debugger.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Struts Tools</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Struts Configuration File Debugger</title> - - <para>JBoss Tools come with <property moreinfo="none">Struts configuration file - debugger</property>. It allows you to set break points on Struts diagram and - then simply launch the server in debug mode.</para> - - <para>Simply right click an Action or a page and select Add <emphasis> - <property moreinfo="none">Breakpoint</property>. </emphasis></para> - <figure float="0"> - <title>Adding Breakpoint</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_50.png"></imagedata> - </imageobject> - </mediaobject> - </figure> -</chapter> - -<chapter id="page_links_recognizer" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/page_links_recognizer.xml"> - <?dbhtml filename="page_links_recognizer.html"?> - - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Customizable Page Links Recognizer</title> - - <para><property moreinfo="none">Custom page links</property> allow you to define custom Struts page - links that will be recognizable in the Struts application diagram. You can - define these links by selecting <emphasis> - <property moreinfo="none">Window &gt; Preferences</property> - </emphasis> from the menu bar and then selecting <emphasis> - <property moreinfo="none">JBoss Tools &gt; Web &gt; Struts &gt; Customization</property> - </emphasis> from the Preferences dialog box.</para> - <figure float="0"> - <title>Customization Panel</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/struts/struts_51.png"></imagedata> - </imageobject> - </mediaobject> - </figure> -</chapter> - -<chapter id="project_verification" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/project_verification.xml"> - <?dbhtml filename="project_verification.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Struts Tools</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Struts Project Verification</title> - - <para>In this section we'll consider one more functionality that JBoss Tools provide for Struts - projects, namely adjusting projects verification.</para> - - <para>To configure Struts project verification select <emphasis> - <property moreinfo="none">Window &gt; Preferences</property> - </emphasis> from the menu bar, select <emphasis> - <property moreinfo="none">JBoss Tools &gt; Web &gt; Verification</property> - </emphasis> from the Preferences dialog box and then expand the - Struts Rules node.</para> - <figure float="0"> - <title>Struts Rules</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/verif_valid/verif_valid_8.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>Suppose you are working in the Source viewer for a Struts - configuration file as shown below:</para> - <figure float="0"> - <title>Struts Configuration File</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/verif_valid/verif_valid_9.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>While typing a class name or entering it from the graphical editor, - you might make a minor typo (like <emphasis role="italic"> - <property moreinfo="none">"sample.GreetingAction1"</property> - </emphasis> instead of <emphasis role="italic"> - <property moreinfo="none">"sample.GreetingAction"</property> - </emphasis>). After saving the file, - <property moreinfo="none">verification</property> checks to make sure everything is - correct and finds the error below:</para> - <figure float="0"> - <title>Error Reporting</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/verif_valid/verif_valid_10.png" scale="75"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>Notice that the Package Explorer View shows a marked folder and a - marked file where the error is.</para> - <para>You can place the cursor over the line with the error to view a - detailed error message:</para> - <figure float="0"> - <title>Error Message</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/verif_valid/verif_valid_11.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>The verification also checks to make sure you have specified the - correct JSP page for the forward:</para> - <figure float="0"> - <title>JSP Page Verification</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/verif_valid/verif_valid_12.png" scale="75"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>Once you place the cursor over the line, you can see the error - message:</para> - <figure float="0"> - <title>Error Message</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/verif_valid/verif_valid_13.png"></imagedata> - </imageobject> - </mediaobject> - </figure> - <para>You can always invoke the verification by switching to the Diagram - viewer, right-clicking and selecting <emphasis> - <property moreinfo="none">Verify</property> - </emphasis> from the context menu:</para> - <figure float="0"> - <title>Verify Command</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/verif_valid/verif_valid_14.png"></imagedata> - </imageobject> - </mediaobject> - </figure> -</chapter> - -<chapter id="rel_resources_links" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/rel_resources_links.xml"> - <?dbhtml filename="rel_resources_links.html"?> - <chapterinfo> - <keywordset> - <keyword>JBoss Developer Studio</keyword> - <keyword>Eclipse</keyword> - <keyword>Struts Tools</keyword> - <keyword>Java</keyword> - <keyword>JBoss</keyword> - </keywordset> - </chapterinfo> - - <title>Relevant Resources Links</title> - - <para>Find out necessary information on <ulink url="http://struts.apache.org/">Struts - technology</ulink> if you don't know enough.</para> - - <para>In summary, this reference should help you to get familiar with those parts of - <property moreinfo="none">JBoss Tools</property> which are meant for development with Struts - technology. If you've carefully gone through the document, you should know - now how to create/import Struts project or enable Struts capabilities for an - existing web project as well as organize and edit all necessary staff for your - Struts application using a set of views and editors provided by <property moreinfo="none">JBoss - Tools</property>.</para> - - <para>If you'd like to contribute your feedback is always appreciated. You can - leave your questions and suggestions on our <ulink url="http://www.jboss.com/index.html?module=bb&amp;op=viewforum&... -</chapter> - -</book> Copied: branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml (from rev 15128, trunk/struts/docs/struts_tools_ref_guide/en/master_output.xml) =================================================================== --- branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml (rev 0) +++ branches/jbosstools-3.0.x/struts/docs/struts_tools_ref_guide/en/master_output.xml 2009-05-11 16:43:34 UTC (rev 15212) @@ -0,0 +1,1263 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" +"http://www.docbook.org/xml/4.3/docbookx.dtd" + +[ +<!ENTITY introduction SYSTEM "modules/introduction.xml"> +<!ENTITY projects SYSTEM "modules/projects.xml"> +<!ENTITY editors SYSTEM "modules/editors.xml"> +<!ENTITY modules SYSTEM "modules/modules.xml"> +<!ENTITY code_generation SYSTEM "modules/code_generation.xml"> +<!ENTITY config_file_debugger SYSTEM "modules/config_file_debugger.xml"> +<!ENTITY page_links_recognizer SYSTEM "modules/page_links_recognizer.xml"> +<!ENTITY project_verification SYSTEM "modules/project_verification.xml"> +<!ENTITY rel_resources_links SYSTEM "modules/rel_resources_links.xml"> + +<!ENTITY seamlink "../../seam/html_single/index.html"> +<!ENTITY aslink "../../as/html_single/index.html"> +<!ENTITY esblink "../../esb_ref_guide/html_single/index.html"> +<!ENTITY gsglink "../../GettingStartedGuide/html_single/index.html"> +<!ENTITY hibernatelink "../../hibernatetools/html_single/index.html"> +<!ENTITY jbpmlink "../../jbpm/html_single/index.html"> +<!ENTITY jsflink "../../jsf/html_single/index.html"> +<!ENTITY jsfreflink "../../jsf_tools_ref_guide/html_single/index.html"> +<!ENTITY jsftutoriallink "../../jsf_tools_tutorial/html_single/index.html"> +<!ENTITY strutsreflink "../../struts_tools_ref_guide/html_single/index.html"> +<!ENTITY strutstutoriallink "../../struts_tools_tutorial/html_single/index.html"> +<!ENTITY migrationlink "../../Exadel-migration/html_single/index.html"> + +]><book xmlns:diffmk="http://diffmk.sf.net/ns/diff"> + <bookinfo> + <title>Struts Tools Reference Guide</title> + + <author><firstname>Anatoly</firstname><surname>Fedosik</surname></author> + <author><firstname>Olga</firstname><surname>Chikvina</surname></author> + <author&gt;&lt;firstname&gt;Svetlana&lt;/firstname&gt;&lt;surname&gt;Mukhina&lt;/surname&gt;&lt;email&gt;smukhina(a)exadel.com&lt;/email&gt;&lt;/author&gt; + + <pubdate>April 2008</pubdate> + <copyright> + <year>2007</year> + <year>2009</year> + <holder>JBoss, a division of Red Hat</holder> + </copyright> + <releaseinfo> + Version: 3.0.0.GA + </releaseinfo> + +<abstract> + <title></title> + <para> + <ulink url="http://download.jboss.org/jbosstools/nightly-docs/en/struts_too... version</ulink> + </para> +</abstract> + + + </bookinfo> + + <toc></toc> + + +<chapter id="intoduction" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/introduction.xml"> + <?dbhtml filename="introduction.html"?> + + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Introduction</title> + + <para>If you prefer to develop web applications using Struts technology JBoss Tools also meet + your needs. The professional developer toolset provides all necessary editors and wizards + for creating Struts resources that enhances the process of building high-quality web + applications.</para> + <note> + <title>Note:</title> + <para>Note that JBoss Tools support the Struts 1.1, 1.2.x versions.</para> + </note> + + <para>In this guide you will learn how to take advantage of Struts support that <property moreinfo="none">JBoss Tools</property> + provide.</para> + + <section id="struts_key_features"> + <title>Key Features of Struts Tools</title> + + <para>For a start, we propose you to look through the table of main features of Struts + Tools:</para> + + <table> + + <title>Key Functionality for Struts Tools</title> + <tgroup cols="3"> + + <colspec align="left" colnum="1" colwidth="2*"></colspec> + <colspec colnum="2" colwidth="4*"></colspec> + <colspec align="left" colnum="3" colwidth="2*"></colspec> + + <thead> + <row> + <entry>Feature</entry> + <entry>Benefit</entry> + <entry>Chapter</entry> + </row> + </thead> + <tbody> + <row> + <entry><para>Struts Support</para></entry> + <entry><para>Step-by-step wizards for creating a new struts project with a number + of predefined templates, importing existing ones and adding struts + capabilities to non-struts web projects.</para></entry> + <entry> + <link linkend="projects">struts support</link> + </entry> + </row> + + <row> + <entry><para>Support for Struts Configuration File</para></entry> + <entry><para>Working on file using three modes: diagram, tree and source. + Synchronization between the modes and full control over the code. Easy + moving around the diagram using the Diagram Navigator. Working with + struts projects that have multiple modules. Possibility to use Struts + configuration file debugger allowing to set break points on struts + diagram and then launch the server in debug mode.</para></entry> + <entry> + <link linkend="struts_config_editor">graphical editor for struts</link> + <link linkend="config_file_debugger">configuration file debugger</link> + </entry> + </row> + + <row> + <entry><para>Support for Struts modules</para></entry> + <entry><para>A Struts module (struts-config.xml) is automatically created while + creating a new project. There is also possibility to add new ones or edit + already existing modules in your existing project or while importing Struts project.</para></entry> + <entry> + <link linkend="modules">modules</link> + </entry> + </row> + + <row> + <entry><para>Verification and Validation</para></entry> + <entry><para><diffmk:wrapper diffmk:change="changed">All occurring errors will be immediately reported by verification + feature, no matter in what view you are working. Constant validation and + errors checking allows to catch many of the errors during development + process that significantly reduces development time.</diffmk:wrapper></para></entry> + <entry> + <link linkend="project_verification">verification and validation</link> + </entry> + + </row> + </tbody> + </tgroup> + </table> + + </section> + + <section> + <title>Other relevant resources on the topic</title> + + <para>All JBoss Developer Studio/JBoss Tools documentation you can find <ulink url="http://docs.jboss.org/tools/">here</ulink>.</p... + <para>The latest documentation builds are available <ulink url="http://download.jboss.org/jbosstools/nightly-docs/">her... + + </section> + +</chapter> + + +<chapter id="projects" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/projects.xml"> + <?dbhtml filename="projects.html"?> + + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Projects</title> + + <para>JBoss Tools provide the following functionality when working with Struts:</para> + + <itemizedlist> + <listitem> + <para>Create new <property moreinfo="none">Struts projects</property></para> + </listitem> + <listitem> + <para>Import (open) existing Struts projects. You can import any project + structure</para> + </listitem> + <listitem> + <para>Add <property moreinfo="none">Struts capabilities</property> to any existing Eclipse + project</para> + </listitem> + <listitem> + <para>Import and add Struts capabilities to any existing project created outside + Eclipse.</para> + </listitem> + </itemizedlist> + <para>Now, we'll focus on all these points more fully.</para> + + <section id="CreatingANewStrutsProjec745t"> + + <title>Creating a New Struts Project</title> + + + <para>JBoss Tools provides a New Struts Project Wizard that radically simplifies the process + for getting started with a new Struts project. You just need to follow these steps:</para> + <itemizedlist> + <listitem> + <para>Select<emphasis> + <property moreinfo="none">File &gt; New &gt; Project...</property> + </emphasis> from the menu bar. Then, select <emphasis> + <property moreinfo="none">JBoss Tools Web &gt; Struts &gt; Struts Project</property> + </emphasis> in this dialog box. Click <emphasis> + <property moreinfo="none">Next</property>: </emphasis></para> + </listitem> + </itemizedlist> + <figure float="0"> + <title>Selecting Struts Wizard</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_2.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <itemizedlist> + <listitem> + <para>On this form, provide the <property moreinfo="none">Project Name</property>. You can also + select where to create the project or use the default path.</para> + <para>Next to <property moreinfo="none">Struts Environment</property> set which Struts version to + use.</para> + </listitem> + </itemizedlist> + + <figure float="0"> + <title>Creating Struts Project</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_3.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <tip> + <title>Tip:</title> + <para>Don't put spaces in project names since some OS could experience problems + with their processing and searching these files.</para> + </tip> + + <para>You can select the KickStart template, then the project created will include a simple + Hello World type application that is ready to run.</para> + + <figure float="0"> + <title>Choosing Struts Template </title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_3_1.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <itemizedlist> + <listitem> + <para>Next, you register this application with the current servlet container defined + for your workspace (JBoss AS, by default) in order to allow you to test your + application more easily while still developing it. A new entry will be added in + the servlet container configuration file to enable running the application + in-place (called null deployment or link deployment). Uncheck the <emphasis role="italic"> + <property moreinfo="none">"Target Server"</property> + </emphasis> check box if for some reason you don't want to register + your application at this point.</para> + </listitem> + </itemizedlist> + <figure float="0"> + <title>Registering The Project at Server</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_4.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <itemizedlist> + <listitem> + <para>On the next form, you can select the TLD files to include in this + project:</para> + </listitem> + </itemizedlist> + <figure float="0"> + <title>Selecting Tag Libraries</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_5.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>After the project is created, you should have the following project structure (if you + used the KickStart template):</para> + + <figure float="0"> + <title>Project Structure</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_6.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <tip> + <title>Tip:</title> + <para>If you want to hide the jar files from Web App Libraries in view, select the + down-pointing arrow in the upper right corner, select + <emphasis>Filters...</emphasis>, check the box next to Name filter patterns + (matching names will be hidden), and type *.jar into the field. Then, click OK. + </para> + </tip> + </section> + <section id="ImportingAnExistingStrutsProjectWithAnyStructure9653"> + + <title>Importing an Existing Struts Project with Any Structure</title> + + <para>For detailed information on migration projects to JBoss Developer Studio see <ulink url="../../Exadel-migration/html_single/index.html">Migration Guide</ulink>.</para> + + </section> + <section id="AddingStrutsCapabilityToAnExistingWebApplication532"> + + <title>Adding Struts Capability to an Existing Web Application</title> + + <para>Here, we'll consider how to add Struts functionality (Struts libraries, tag + libraries and a Struts configuration file) to any existing Web application project in + your Eclipse workspace.</para> + + <para>By adding a Struts Nature to your project, you can now edit files using JBoss Tools + editors, such as the <link linkend="struts_config_editor">Struts configuration + editor</link> and the JBoss Tools JSP editor. To take advantage of this just right-click + the project and select <emphasis> + <property moreinfo="none">JBoss Tools &gt; Add Struts Capabilities</property> + </emphasis> from the context menu. This will start the process of adding all necessary + libraries and files to make a Web Struts project from your one.</para> + + <figure float="0"> + <title>Adding Struts Capabilities</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_7.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>In the wizard you should point to location of your deployment descriptor file web.xml + and name of the project.</para> + + <figure float="0"> + <title>Choosing Project Location</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_8.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>After hitting <emphasis> + <property moreinfo="none">Next</property>, </emphasis> you will see the following screen. This + screen simply means that you need to add at least one Struts module to your project to + make this project a Struts project. Adding a Struts module means that a new + struts-config.xml will be added to your project and registered in the web.xml file. In + addition, all required Struts libraries will be added. To add a Struts module, select + the <emphasis> + <property moreinfo="none">Add Struts Support</property> + </emphasis> button.</para> + <figure float="0"> + <title>Project Modules</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_9.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>Here you can select what Struts <property moreinfo="none">Version</property>, <property moreinfo="none">Servlet + Class</property>, <property moreinfo="none">URL Pattern</property> and <property moreinfo="none">TLD</property>s to add + to this project.</para> + + <figure float="0"> + <title>Selecting Struts Support Options</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_10.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>When done, you will see the default Struts module configuration information. See how + to Edit <link linkend="modules">Struts modules</link>.</para> + + <figure float="0"> + <title>Project Configuration Information</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_11.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>On the last screen you can set the different folders for your project as well as + register this application with a servlet container. If you want the libraries (.jar + files) will be automatically added to your project, click on the checkbox <emphasis> + <property moreinfo="none">Add Libraries</property>.</emphasis></para> + + <figure float="0"> + <title>Registering the Project at Server</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_12.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para><diffmk:wrapper diffmk:change="changed">When done, you can open end edit the struts-config.xml file using useful Struts + configuration file editor provided by JBDS. (The Struts configuration is shown below in + the Tree viewer).</diffmk:wrapper></para> + + <figure float="0"> + <title>Struts-config.xml File</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_13.png" scale="75"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + +</chapter> + + +<chapter id="editors" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/editors.xml"> + <?dbhtml filename="editors.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Struts Tools</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Editors</title> + <para>In this chapter we'll introduce you to featured graphical editors for specific + Struts files such as Struts Configuration files, Tiles files and Struts Validation files.</para> + <section id="struts_config_editor"> + + <title>Graphical Editor for Struts Configuration Files</title> + <para>First, let's dwell on the Struts Configuration file editor.</para> + <para>This editor has three views with different representation of <emphasis> + <property moreinfo="none">struts-config.xml</property>: </emphasis>Diagram, Tree and Source. The + views can be selected via the tabs at the bottom of the editor. Any changes made in one + view are immediately visible when you switch to any other view.</para> + + <para>Now, we'll consider every view in more detail.</para> + <section id="StrutsDiagramMode453"> + + <title>Diagram View</title> + + <para>The Diagram view graphically displays the Web flow of the application defined in + the Struts configuration file.</para> + + <figure float="0"> + <title>Diagram View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_14.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>The Diagram view allows to edit navigation in your Struts application. Just by + right-clicking anywhere on the diagram, you can use a context menu to create the + building blocks of a Struts application:</para> + <itemizedlist> + <listitem> + <para>Actions</para> + </listitem> + <listitem> + <para>Global forwards</para> + </listitem> + <listitem> + <para>Global exceptions</para> + </listitem> + <listitem> + <para>JSP Pages</para> + </listitem> + </itemizedlist> + + <figure float="0"> + <title>Diagram Context Menu</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_15.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>Along the upper-left side of the editor is a stack of seven icons for changing the + behavior of the cursor in the diagram. </para> + + <figure float="0"> + <title>Editor Icons</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_16.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>The first icon switches to the default regular selection cursor, the second to the + marquee selection cursor and the third to the new connection cursor. The last four + icons switch the cursor to an insert cursor for each type of Struts build block + listed above (and in the order listed).</para> + + <para>For instance, clicking on the first of these four icons (the one with the gears) + will switch the cursor to insert actions. Clicking anywhere in the diagram with this + cursor has the same effect as right-click and selecting <emphasis> + <property moreinfo="none">Add &gt; Action...</property> + </emphasis> from the context menu with the regular cursor active. It's just + more efficient to use this cursor if you're adding more than one action at + once.</para> + + + </section> + <section id="StrutsTreeMode42"> + + <title>Tree View</title> + + <para>The Tree view represents the different elements of the Struts application that are + organized into functional categories on the left-hand side and a form for editing + the properties of currently selected items on the right-hand side.</para> + + <figure float="0"> + <title>Tree View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_17.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>You can also right-click on any node in the category tree and perform appropriate + operations through a context menu. For instance, by right-clicking on the + action-mappings category node, you can add new actions to the application.</para> + + <figure float="0"> + <title>Tree Context Menu</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_18.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section id="StrutsSourceMode9655"> + + <title>Source View</title> + + <para>In the Source view, you have complete editing control of the underlying XML + coding.</para> + + <figure float="0"> + <title>Source View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_19.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>When working in Source view, you always have all the following features available:</para> + <itemizedlist> + <listitem> + <para>Content Assist</para> + </listitem> + <listitem> + <para>Open On Selection</para> + </listitem> + <listitem> + <para>File Folding</para> + </listitem> + </itemizedlist> + <para>You can take advantage of <ulink url="../../jsf/html_single/index.html#CodeAssistAndDynamicCodeAssist42BasedOnProjectData">code assist</ulink>.</para> + <figure float="0"> + <title>Code Assist</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_20.png" scale="85"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>The editor will also immediately flag any errors.</para> + + <figure float="0"> + <title>Errors in Source View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_21.png" scale="85"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>Finally, you can use the Outline view with the editor to easily navigate through + the file.</para> + + <figure float="0"> + <title>Outline View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_22.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>Find more information about editor features <ulink url="../../jsf/html_single/index.html#editors_features">here</ulink>.</para> + </section> + </section> + + <section id="GraphicalEditorForTilesFiles132"> + + <title>Graphical Editor for Tiles Files</title> + <para>Here, you'll know how to make use of the special graphical editor for Tiles configuration files.</para> + <para>The editor has three main views: Tree, Diagram and Source. + The views can be selected via the tabs at the bottom of the editor. Any changes made in + one view are immediately visible when you switch to any other view.</para> + + <para>Before we consider each view of the editor, let's look at the way of creating new Tiles files.</para> + <section id="CreateNewTilesFile1422"> + + <title>Create New Tiles File</title> + + <para>To create new Tiles files, right click any folder and select <emphasis> + <property moreinfo="none">New &gt; Tiles File</property>. </emphasis></para> + <figure float="0"> + <title>Creating a New Tiles File</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_23.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section id="StrutsTreeView896"> + + <title>Tree View</title> + + <para>The Tree view represents the different elements of the Tiles file that are + organized into functional categories on the left-hand side and a form for editing + the properties of currently selected items on the right-hand side.</para> + <figure float="0"> + <title>Tree View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_24.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>To edit the file, simply right click any node and select among the available + actions.</para> + <figure float="0"> + <title>Editing in Tiles Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_25.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section id="StrutsDiagramView4643"> + + <title>Diagram View</title> + + <para>The Diagram view allows you to create complex Tiles files in the form of a + diagram.</para> + <figure float="0"> + <title>Diagram Mode</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_26.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>To create new definitions, simply right click anywhere in the diagram.</para> + <figure float="0"> + <title>Creating New Definition</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_27.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>You can also use the Diagram toolbar to make editing easier.</para> + <figure float="0"> + <title>Diagram Toolbar</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_28.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para> It contains four icons for changing the cursor state. The first one is the + default cursor state for selecting existing nodes. The second icon is marquee + selector. The third is used for creating new connections and the last one is for + adding definition template to the content.</para> + </section> + <section id="StrutsSource75"> + + <title>Source</title> + + <para>The other view of the <property moreinfo="none">Tiles editor</property> is the Source view that + gives you full control over the source. Any changes here will immediately appear in + other modes when you switch to them.</para> + + <para>When working in Source view, you always have all following features available:</para> + <itemizedlist> + <listitem> + <para>Content Assist</para> + </listitem> + <listitem> + <para>Open On Selection</para> + </listitem> + </itemizedlist> + + <figure float="0"> + <title>Source View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_29.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para><ulink url="../../jsf/html_single/index.html#CodeAssistAndDynamicCodeAssist42BasedOnProjectData">Code + assist</ulink> is available in the Source mode.</para> + <figure float="0"> + <title>Code Assist</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_30.png" scale="85"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Any errors are immediately reported as shown below:</para> + <figure float="0"> + <title>Errors Reporting</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_31.png" scale="75"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>You can also use the Outline view together with the editor's Source mode. + It provides an easier navigation through the file.</para> + <figure float="0"> + <title>Outline View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_32.png" scale="85"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + </section> + + <section id="GraphicalEditorForStrutsValidationFiles86"> + + <title>Graphical Editor for Struts Validation Files</title> + + <para>Providing full support for development Struts applications JBoss Tools comes with a + visual validation editor. To open the editor double-click on the validation file or if you don't have it create a new one.</para> + + <para>To create a new validation file, right click any folder in + Project Explorer and select <emphasis> + <property moreinfo="none">File &gt; New &gt; Other...</property> + </emphasis>from the context menu and then <emphasis> + <property moreinfo="none">JBoss Tools Web &gt; Struts &gt; Validation File</property>. </emphasis></para> + <figure float="0"> + <title>Creating New Validation File</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_33.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>The validation editor works with five modes: Formsets, Validators, Constants and + standard Tree and Source that you can easily switch over using tabs at the bottom of the + editor.</para> + <para>The Formsets view shows forms and their elements on the left side and the dialogue for + defining their validation rules on the right side.</para> + <figure float="0"> + <title>Formsets View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_34.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>The Constants view let you set constant values for your validation rules.</para> + <figure float="0"> + <title>Constansts View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_35.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>The validation file can also be viewed in a Tree view.</para> + <figure float="0"> + <title>Tree View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_36.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>At any point you have full control over the source by switching to the Source view. + Any editing in this view will immediately be available in other views of the editor.</para> + <figure float="0"> + <title>Source View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_37.png" scale="85"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>You can also open your own custom or Struts-standard <emphasis> + <property moreinfo="none">validation-rules.xml</property> + </emphasis> file.</para> + <para>The Validators view shows the validation rules for a selected validator. You can of + course add your own rules.</para> + <figure float="0"> + <title>Validators View</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_38.png" scale="75"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Here are the validation rules shown in the Source mode.</para> + <figure float="0"> + <title>Validation Rules</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_39.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> +</chapter> + + +<chapter id="modules" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/modules.xml"> + <?dbhtml filename="modules.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Struts Tools</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Modules</title> + + <para>JBoss Tools support working with Struts projects that have + multiple modules. You can easily do the following:</para> + <itemizedlist> + <listitem> + <para>Add new modules</para> + </listitem> + <listitem> + <para>Edit modules for an existing project or during Struts project + import</para> + </listitem> + </itemizedlist> + <para>Now, let's discuss this functionality in more detail.</para> + <section id="WhenImportingAStrutsProject432"> + + <title>When Importing a Struts Project</title> + + <para>During Struts project import, if the project has multiple modules, you + will see a screen with all existing modules. You can select each + module and edit its details.</para> + + <figure float="0"> + <title>Configuring Project Modules</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_40.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section id="EditingModulesInAnExistingProject1"> + + <title>Editing Modules in an Existing Project</title> + <para>To edit modules in an existing project, right click the project and + select <emphasis> + <property moreinfo="none">JBoss Tools &gt; Modules Configuration</property>. + </emphasis></para> + <figure float="0"> + <title>Choosing Modules Configuration</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_41.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>You will see the same screen as above where you will be able to select + a module and edit its details.</para> + <figure float="0"> + <title>Modules Configuration</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_42.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> + <section id="AddingNewModules1"> + + <title>Adding New Modules</title> + + <para>Adding a new module is very simple. First switch to Web Project view. + Expand your project to the Configuration folder. Under that folder + you should see the current modules. Right click on Configuration and + select <emphasis> + <property moreinfo="none">New &gt; Struts Config</property>. </emphasis></para> + <figure float="0"> + <title>Adding New Modules</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_43.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>You will see the screen below. You can specify a new module name and + also add the new Struts configuration file to web.xml file.</para> + <figure float="0"> + <title>Adding New Modules</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_44.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + </section> +</chapter> + + +<chapter id="code_generation" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/code_generation.xml"> + <?dbhtml filename="code_generation.html"?> + + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Struts Tools</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Code Generation</title> + + <para>JBoss Tools comes with a <property moreinfo="none">code generation</property> + feature. You can generate stub code for Struts Actions, FormBeans, Forwards + and Exceptions.</para> + + <para>The code generation that JBoss tooling provides is based on Velocity templates + which can be modified for your use. The templates are located at <emphasis> + <property moreinfo="none"> {JBossStudioHome} &gt; templates &gt; + codegeneration</property>. </emphasis></para> + + <para>There are a number of ways to invoke code generation. One is simply + right-clicking the Struts diagram and selecting <emphasis> + <property moreinfo="none">Generate Java Code....</property> + </emphasis></para> + + <figure float="0"> + <title>Selecting Generate Java Code</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_45.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>On this screen you can select for which elements to generate code. If you + select Next you will be able to specify more options for each of the + categories you selected.</para> + + <figure float="0"> + <title>Generate - Step 1</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_46.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <tip> + <title>Tip:</title> + <para>Please be careful not to override your existing files.</para> + </tip> + + <para>When generation is complete, a result window will appear letting you know how + many classes were generated:</para> + + <figure float="0"> + <title>Generation Finished</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_47.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>You don't always have to generate code for all elements at once. You + can invoke generation for just an individual Struts artifact as well. + Right-click an element on the diagram of the Struts configuration file and + select <emphasis> + <property moreinfo="none">Generate Java Code...</property> + </emphasis> from the context menu.</para> + + <figure float="0"> + <title>Generation For Individual Struts Artifact</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_48.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + + <para>The same can be done from within the Tree viewer for the editor of the Struts + configuration file.</para> + + <figure float="0"> + <title>Generation in Struts Config Editor</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_49.png"></imagedata> + </imageobject> + </mediaobject> + </figure> +</chapter> + +<chapter id="config_file_debugger" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/config_file_debugger.xml"> + <?dbhtml filename="config_file_debugger.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Struts Tools</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Struts Configuration File Debugger</title> + + <para>JBoss Tools come with <property moreinfo="none">Struts configuration file + debugger</property>. It allows you to set break points on Struts diagram and + then simply launch the server in debug mode.</para> + + <para>Simply right click an Action or a page and select Add <emphasis> + <property moreinfo="none">Breakpoint</property>. </emphasis></para> + <figure float="0"> + <title>Adding Breakpoint</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_50.png"></imagedata> + </imageobject> + </mediaobject> + </figure> +</chapter> + +<chapter id="page_links_recognizer" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/page_links_recognizer.xml"> + <?dbhtml filename="page_links_recognizer.html"?> + + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Customizable Page Links Recognizer</title> + + <para><property moreinfo="none">Custom page links</property> allow you to define custom Struts page + links that will be recognizable in the Struts application diagram. You can + define these links by selecting <emphasis> + <property moreinfo="none">Window &gt; Preferences</property> + </emphasis> from the menu bar and then selecting <emphasis> + <property moreinfo="none">JBoss Tools &gt; Web &gt; Struts &gt; Customization</property> + </emphasis> from the Preferences dialog box.</para> + <figure float="0"> + <title>Customization Panel</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/struts/struts_51.png"></imagedata> + </imageobject> + </mediaobject> + </figure> +</chapter> + +<chapter id="project_verification" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/project_verification.xml"> + <?dbhtml filename="project_verification.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Struts Tools</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Struts Project Verification</title> + + <para>In this section we'll consider one more functionality that JBoss Tools provide for Struts + projects, namely adjusting projects verification.</para> + + <para>To configure Struts project verification select <emphasis> + <property moreinfo="none">Window &gt; Preferences</property> + </emphasis> from the menu bar, select <emphasis> + <property moreinfo="none">JBoss Tools &gt; Web &gt; Verification</property> + </emphasis> from the Preferences dialog box and then expand the + Struts Rules node.</para> + <figure float="0"> + <title>Struts Rules</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/verif_valid/verif_valid_8.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Suppose you are working in the Source viewer for a Struts + configuration file as shown below:</para> + <figure float="0"> + <title>Struts Configuration File</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/verif_valid/verif_valid_9.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>While typing a class name or entering it from the graphical editor, + you might make a minor typo (like <emphasis role="italic"> + <property moreinfo="none">"sample.GreetingAction1"</property> + </emphasis> instead of <emphasis role="italic"> + <property moreinfo="none">"sample.GreetingAction"</property> + </emphasis>). After saving the file, + <property moreinfo="none">verification</property> checks to make sure everything is + correct and finds the error below:</para> + <figure float="0"> + <title>Error Reporting</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/verif_valid/verif_valid_10.png" scale="75"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Notice that the Package Explorer View shows a marked folder and a + marked file where the error is.</para> + <para>You can place the cursor over the line with the error to view a + detailed error message:</para> + <figure float="0"> + <title>Error Message</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/verif_valid/verif_valid_11.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>The verification also checks to make sure you have specified the + correct JSP page for the forward:</para> + <figure float="0"> + <title>JSP Page Verification</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/verif_valid/verif_valid_12.png" scale="75"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>Once you place the cursor over the line, you can see the error + message:</para> + <figure float="0"> + <title>Error Message</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/verif_valid/verif_valid_13.png"></imagedata> + </imageobject> + </mediaobject> + </figure> + <para>You can always invoke the verification by switching to the Diagram + viewer, right-clicking and selecting <emphasis> + <property moreinfo="none">Verify</property> + </emphasis> from the context menu:</para> + <figure float="0"> + <title>Verify Command</title> + <mediaobject> + <imageobject> + <imagedata fileref="images/verif_valid/verif_valid_14.png"></imagedata> + </imageobject> + </mediaobject> + </figure> +</chapter> + +<chapter id="rel_resources_links" xml:base="file:///home/ochikvina/WORK/for_compare/trunk/struts/docs/struts_tools_ref_guide/en/modules/rel_resources_links.xml"> + <?dbhtml filename="rel_resources_links.html"?> + <chapterinfo> + <keywordset> + <keyword>JBoss Developer Studio</keyword> + <keyword>Eclipse</keyword> + <keyword>Struts Tools</keyword> + <keyword>Java</keyword> + <keyword>JBoss</keyword> + </keywordset> + </chapterinfo> + + <title>Relevant Resources Links</title> + + <para>Find out necessary information on <ulink url="http://struts.apache.org/">Struts + technology</ulink> if you don't know enough.</para> + + <para>In summary, this reference should help you to get familiar with those parts of + <property moreinfo="none">JBoss Tools</property> which are meant for development with Struts + technology. If you've carefully gone through the document, you should know + now how to create/import Struts project or enable Struts capabilities for an + existing web project as well as organize and edit all necessary staff for your + Struts application using a set of views and editors provided by <property moreinfo="none">JBoss + Tools</property>.</para> + + <para>If you'd like to contribute your feedback is always appreciated. You can + leave your questions and suggestions on our <ulink url="http://www.jboss.com/index.html?module=bb&amp;op=viewforum&... + <para diffmk:change="added"><diffmk:wrapper diffmk:change="added">We hope, this guide helped you to get started with the JBoss Struts Tools. Besides, for additional information you are welcome on </diffmk:wrapper><ulink diffmk:change="added" url="http://www.jboss.com/index.html?module=bb&amp;op=viewforum&... diffmk:change="added">JBoss forum</diffmk:wrapper></ulink><diffmk:wrapper diffmk:change="added">.</diffmk:wrapper></para> +</chapter> + +</book>