2:56 p.m.
Hi,
Is it possible to capture which move was selected on step-end?
I don't mean in the logging but by event or custom selector or... ?
Thanks
Michiel
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
3:37 a.m.
Officially, in the public api (aka the "user facing api"), there's no
such listener.
Why would you need this at runtime?
Open an issue: if there's a good reason to need this, we can talk about
adding it to the public api.
https://issues.jboss.org/browse/PLANNER
That being said and handled first, the benchmarker actually hacks a step
listener if I recall correctly:
https://github.com/droolsjbpm/drools-planner/tree/master/drools-planner-b...
Op 20-02-13 21:56, Michiel Vermandel schreef:
Hi,
Is it possible to capture which move was selected on step-end?
I don't mean in the logging but by event or custom selector or... ?
Thanks
Michiel
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
3:11 a.m.
Well,
I need to solve - let's say - a complex 2 dimensional puzzle.
The goal is to fill a 2D rectangle (with fixed dimensions) out of "puzzle
pieces" that do not have a fixed shape.
A puzzle piece is built out of a number of bars of variable length and the bars can slide
against each other (to some extend: differs per joint of two bars).
Just shifting and swapping around the "puzzle pieces" is not quite well
performingsince that will result in many
violations although a shift or swap could match perfectly if you slide (some of) the bars
of the piece at the same time.
Feeding all possible combinations of shifts and swaps combined with all possible forms of
the pieces would result in ... well quite a lot of combinations.
So I want to build a smarter mover that "knows" how to slide a piece in order to
fit it in an available place (or swap it with an other piece to improve both pieces
match).
I think the mover would perform far better if I have a "bit-map" that contains
the 2D representation of the way everything is placed and which could calculate the best
layout of the piece before putting it into the puzzle.
Therefor I would like to know the last change applied so I can incrementally update the
bit-map instead of recalculating it entirely every time.
Hey, hmmm... maybe I don't need to know the last accepted move. Just finding the diff
between best-solution and previous best-solution might do the trick?!
For finding the best layout of a single piece, ?could I use a second instance of planner
that does a "normal" bin-packaging of a single piece in the available container
(container is then an available free area or the combination of one or more other pieces
and the free space around that other piece)?
Maybe I'm going goofy on this... too many long nights are beginning to cloud my mind.
Well, any ideas are welcome.
Regards.
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
To: rules-users(a)lists.jboss.org
Sent: Thursday, February 21, 2013 10:37 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was selected on
step-end?
Officially, in the public api (aka the "user facing api"), there's no such
listener.
Why would you need this at runtime?
Open an issue: if there's a good reason to need this, we can talk
about adding it to the public api.
https://issues.jboss.org/browse/PLANNER
That being said and handled first, the benchmarker actually hacks a
step listener if I recall correctly:
https://github.com/droolsjbpm/drools-planner/tree/master/drools-planner-b...
Op 20-02-13 21:56, Michiel Vermandel schreef:
Hi,
Is it possible to capture which move was selected on step-end?
I don't mean in the logging but by event or custom selector or... ?
Thanks
Michiel
-----------------
http://www.codessentials.com - Your essential software, for
free!
Follow us at http://twitter.com/#!/Codessentials
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
3:28 a.m.
Reminds me of a very fascinating paper
http://www-cs-faculty.stanford.edu/~uno/papers/dancing-color.ps.gz
(Note that the paper discusses puzzles where pieces may have one out
of a limited number of "shapes" resulting from all permitted
positions. I guess that's similar to what OP described.)
-W
On 22/02/2013, Michiel Vermandel <mvermand(a)yahoo.com> wrote:
Well,
I need to solve - let's say - a complex 2 dimensional puzzle.
The goal is to fill a 2D rectangle (with fixed dimensions) out of "puzzle
pieces" that do not have a fixed shape.
A puzzle piece is built out of a number of bars of variable length and the
bars can slide against each other (to some extend: differs per joint of two
bars).
Just shifting and swapping around the "puzzle pieces" is not quite well
performingsince that will result in many
violations although a shift or swap could match perfectly if you slide (some
of) the bars of the piece at the same time.
Feeding all possible combinations of shifts and swaps combined with all
possible forms of the pieces would result in ... well quite a lot of
combinations.
So I want to build a smarter mover that "knows" how to slide a piece in
order to fit it in an available place (or swap it with an other piece to
improve both pieces match).
I think the mover would perform far better if I have a "bit-map" that
contains the 2D representation of the way everything is placed and which
could calculate the best layout of the piece before putting it into the
puzzle.
Therefor I would like to know the last change applied so I can incrementally
update the bit-map instead of recalculating it entirely every time.
Hey, hmmm... maybe I don't need to know the last accepted move. Just finding
the diff between best-solution and previous best-solution might do the
trick?!
For finding the best layout of a single piece, ?could I use a second
instance of planner that does a "normal" bin-packaging of a single piece in
the available container (container is then an available free area or the
combination of one or more other pieces and the free space around that other
piece)?
Maybe I'm going goofy on this... too many long nights are beginning to cloud
my mind.
Well, any ideas are welcome.
Regards.
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
To: rules-users(a)lists.jboss.org
Sent: Thursday, February 21, 2013 10:37 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was
selected on step-end?
Officially, in the public api (aka the "user facing api"), there's no such
listener.
Why would you need this at runtime?
Open an issue: if there's a good reason to need this, we can talk
about adding it to the public api.
https://issues.jboss.org/browse/PLANNER
That being said and handled first, the benchmarker actually hacks a
step listener if I recall correctly:
https://github.com/droolsjbpm/drools-planner/tree/master/drools-planner-b...
Op 20-02-13 21:56, Michiel Vermandel schreef:
Hi,
>
>
>Is it possible to capture which move was selected on step-end?
>I don't mean in the logging but by event or custom selector or... ?
>
>
>
>Thanks
>
>
>Michiel
>
>
>-----------------
>http://www.codessentials.com - Your essential software, for
free!
>Follow us at http://twitter.com/#!/Codessentials
>
>
>_______________________________________________
rules-users mailing list rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
3:31 a.m.
Op 22-02-13 10:11, Michiel Vermandel schreef:
Well,
I need to solve - let's say - a complex 2 dimensional puzzle.
The goal is to fill a 2D rectangle (with fixed dimensions) out of
"puzzle pieces" that do not have a fixed shape.
A puzzle piece is built out of a number of bars of variable length and
the bars can slide against each other (to some extend: differs per
joint of two bars).
Just shifting and swapping around the "puzzle pieces" is not quite
well performing since that will result in many
violations although a shift or swap could match perfectly if you slide
(some of) the bars of the piece at the same time.
In one implementation we added an
extra "score level", a subsoft level,
to make the score function favor "defragmented" solutions (less small
gaps between items).
This technique is proven to work out well. Too bad that
HardMediumSoftScore and BendableScore aren't available in 5.5.0.Final
yet: just copy paste one of them from master into your package structure.
Feeding all possible combinations of shifts and swaps combined with
all possible forms of the pieces would result in ... well quite a lot
of combinations.
If you create them JIT enabled, that should be fine. Either
combing
existing moveSelectors with cartesianProduct, and make sure they are all
selectionOrder RANDOM,
or use MoveIteratorFactory (as opposed to MoveListFactory)
So I want to build a smarter mover that "knows" how to
slide a piece
in order to fit it in an available place (or swap it with an other
piece to improve both pieces match).
I think the mover would perform far better if I have a "bit-map" that
contains the 2D representation of the way everything is placed and
which could calculate the best layout of the piece before putting it
into the puzzle.
Therefor I would like to know the last change applied so I can
incrementally update the bit-map instead of recalculating it entirely
every time.
Because doing it in the ScoreDirectory all the time is annoying, I see.
Makes sense if you want to go this way.
Hey, hmmm... maybe I don't need to know the last accepted move. Just
finding the diff between best-solution and previous best-solution
might do the trick?!
For finding the best layout of a single piece, ?could I use a second
instance of planner that does a "normal" bin-packaging of a single
piece in the available container (container is then an available free
area or the combination of one or more other pieces and the free space
around that other piece)?
Maybe I'm going goofy on this... too many long nights are beginning to
cloud my mind.
I seriously doubt this is the right path to go.
- It sounds like you're making everything far more complex than it needs
to be. Re-examen your domain model. Compare it with the curriculum
course domain model.
- Trying to guide what local search actually needs to select doesn't
usually work out well. It often does more harm than good after the 1
minute of running. If you go down this path, at least give local search
multiple area's that you're focusing on.
- Given the dilemma, I would strongly prefer "cartesian moves" (= a
single move that does 2 moves) over "let's see what move local search
ended up taking and try to now select a companion move in that area".
That second approach is pretty much doomed in my eyes.
Well, any ideas are welcome.
Regards.
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
------------------------------------------------------------------------
*From:* Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
*To:* rules-users(a)lists.jboss.org
*Sent:* Thursday, February 21, 2013 10:37 AM
*Subject:* Re: [rules-users] Planner: Is it possible to know which
move was selected on step-end?
Officially, in the public api (aka the "user facing api"), there's no
such listener.
Why would you need this at runtime?
Open an issue: if there's a good reason to need this, we can talk
about adding it to the public api.
https://issues.jboss.org/browse/PLANNER
That being said and handled first, the benchmarker actually hacks a
step listener if I recall correctly:
https://github.com/droolsjbpm/drools-planner/tree/master/drools-planner-b...
Op 20-02-13 21:56, Michiel Vermandel schreef:
> Hi,
>
> Is it possible to capture which move was selected on step-end?
> I don't mean in the logging but by event or custom selector or... ?
>
> Thanks
>
> Michiel
> -----------------
> http://www.codessentials.com - Your essential software, for free!
> Follow us at http://twitter.com/#!/Codessentials
>
>
> _______________________________________________
> rules-users mailing list
> rules-users(a)lists.jboss.org <mailto:rules-users@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org <mailto:rules-users@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
4:34 a.m.
Thanks a lot.
Though when I try to open the archive with 7-Zip it says that it cannot open it.
I'm working on Windows7.
Any idea of tool I could use?
Thanks
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: Wolfgang Laun <wolfgang.laun(a)gmail.com>
To: Michiel Vermandel <mvermand(a)yahoo.com>; Rules Users List
<rules-users(a)lists.jboss.org>
Sent: Friday, February 22, 2013 10:28 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was selected on
step-end?
Reminds me of a very fascinating paper
http://www-cs-faculty.stanford.edu/~uno/papers/dancing-color.ps.gz
(Note that the paper discusses puzzles where pieces may have one out
of a limited number of "shapes" resulting from all permitted
positions. I guess that's similar to what OP described.)
-W
On 22/02/2013, Michiel Vermandel <mvermand(a)yahoo.com> wrote:
Well,
I need to solve - let's say - a complex 2 dimensional puzzle.
The goal is to fill a 2D rectangle (with fixed dimensions) out of "puzzle
pieces" that do not have a fixed shape.
A puzzle piece is built out of a number of bars of variable length and the
bars can slide against each other (to some extend: differs per joint of two
bars).
Just shifting and swapping around the "puzzle pieces" is not quite well
performingsince that will result in many
violations although a shift or swap could match perfectly if you slide (some
of) the bars of the piece at the same time.
Feeding all possible combinations of shifts and swaps combined with all
possible forms of the pieces would result in ... well quite a lot of
combinations.
So I want to build a smarter mover that "knows" how to slide a piece in
order to fit it in an available place (or swap it with an other piece to
improve both pieces match).
I think the mover would perform far better if I have a "bit-map" that
contains the 2D representation of the way everything is placed and which
could calculate the best layout of the piece before putting it into the
puzzle.
Therefor I would like to know the last change applied so I can incrementally
update the bit-map instead of recalculating it entirely every time.
Hey, hmmm... maybe I don't need to know the last accepted move. Just finding
the diff between best-solution and previous best-solution might do the
trick?!
For finding the best layout of a single piece, ?could I use a second
instance of planner that does a "normal" bin-packaging of a single piece in
the available container (container is then an available free area or the
combination of one or more other pieces and the free space around that other
piece)?
Maybe I'm going goofy on this... too many long nights are beginning to cloud
my mind.
Well, any ideas are welcome.
Regards.
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
To: rules-users(a)lists.jboss.org
Sent: Thursday, February 21, 2013 10:37 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was
selected on step-end?
Officially, in the public api (aka the "user facing api"), there's no such
listener.
Why would you need this at runtime?
Open an issue: if there's a good reason to need this, we can talk
about adding it to the public api.
https://issues.jboss.org/browse/PLANNER
That being said and handled first, the benchmarker actually hacks a
step listener if I recall correctly:
https://github.com/droolsjbpm/drools-planner/tree/master/drools-planner-b...
Op 20-02-13 21:56, Michiel Vermandel schreef:
Hi,
>
>
>Is it possible to capture which move was selected on step-end?
>I don't mean in the logging but by event or custom selector or... ?
>
>
>
>Thanks
>
>
>Michiel
>
>
>-----------------
>http://www.codessentials.com - Your essential software, for
free!
>Follow us at http://twitter.com/#!/Codessentials
>
>
>_______________________________________________
rules-users mailing list rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
1:01 p.m.
New subject: Planner: Is it possible to know which move was selected on step-end?
.ps.gz is a postscript file compressed using GZip. On windows you will need to find a
postscript viewer, or you can use the ps2pdf online tool to convert it to a pdf document.
And to uncompress the gz file you can either search for gzip (gunzip) or use Cygwin so
you can have the full Gnu suite available. There is a gzip for windows, but I am a little
confused, because I thought 7-Zip is able to expand the GZip files.
From: rules-users-bounces(a)lists.jboss.org [mailto:rules-users-bounces@lists.jboss.org] On
Behalf Of Michiel Vermandel
Sent: Friday, February 22, 2013 2:34 AM
To: Wolfgang Laun; Rules Users List
Subject: Re: [rules-users] Planner: Is it possible to know which move was selected on
step-end?
Thanks a lot.
Though when I try to open the archive with 7-Zip it says that it cannot open it.
I'm working on Windows7.
Any idea of tool I could use?
Thanks
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: Wolfgang Laun <wolfgang.laun@gmail.com<mailto:wolfgang.laun@gmail.com>>
To: Michiel Vermandel <mvermand@yahoo.com<mailto:mvermand@yahoo.com>>; Rules
Users List <rules-users@lists.jboss.org<mailto:rules-users@lists.jboss.org>>
Sent: Friday, February 22, 2013 10:28 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was selected on
step-end?
Reminds me of a very fascinating paper
http://www-cs-faculty.stanford.edu/~uno/papers/dancing-color.ps.gz
(Note that the paper discusses puzzles where pieces may have one out
of a limited number of "shapes" resulting from all permitted
positions. I guess that's similar to what OP described.)
-W
On 22/02/2013, Michiel Vermandel
<mvermand@yahoo.com<mailto:mvermand@yahoo.com>> wrote:
Well,
I need to solve - let's say - a complex 2 dimensional puzzle.
The goal is to fill a 2D rectangle (with fixed dimensions) out of "puzzle
pieces" that do not have a fixed shape.
A puzzle piece is built out of a number of bars of variable length and the
bars can slide against each other (to some extend: differs per joint of two
bars).
Just shifting and swapping around the "puzzle pieces" is not quite well
performingsince that will result in many
violations although a shift or swap could match perfectly if you slide (some
of) the bars of the piece at the same time.
Feeding all possible combinations of shifts and swaps combined with all
possible forms of the pieces would result in ... well quite a lot of
combinations.
So I want to build a smarter mover that "knows" how to slide a piece in
order to fit it in an available place (or swap it with an other piece to
improve both pieces match).
I think the mover would perform far better if I have a "bit-map" that
contains the 2D representation of the way everything is placed and which
could calculate the best layout of the piece before putting it into the
puzzle.
Therefor I would like to know the last change applied so I can incrementally
update the bit-map instead of recalculating it entirely every time.
Hey, hmmm... maybe I don't need to know the last accepted move. Just finding
the diff between best-solution and previous best-solution might do the
trick?!
For finding the best layout of a single piece, ?could I use a second
instance of planner that does a "normal" bin-packaging of a single piece in
the available container (container is then an available free area or the
combination of one or more other pieces and the free space around that other
piece)?
Maybe I'm going goofy on this... too many long nights are beginning to cloud
my mind.
Well, any ideas are welcome.
Regards.
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: Geoffrey De Smet
<ge0ffrey.spam@gmail.com<mailto:ge0ffrey.spam@gmail.com>>
To: rules-users@lists.jboss.org<mailto:rules-users@lists.jboss.org>
Sent: Thursday, February 21, 2013 10:37 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was
selected on step-end?
Officially, in the public api (aka the "user facing api"), there's no such
listener.
Why would you need this at runtime?
Open an issue: if there's a good reason to need this, we can talk
about adding it to the public api.
https://issues.jboss.org/browse/PLANNER
That being said and handled first, the benchmarker actually hacks a
step listener if I recall correctly:
https://github.com/droolsjbpm/drools-planner/tree/master/drools-planner-b...
Op 20-02-13 21:56, Michiel Vermandel schreef:
Hi,
>
>
>Is it possible to capture which move was selected on step-end?
>I don't mean in the logging but by event or custom selector or... ?
>
>
>
>Thanks
>
>
>Michiel
>
>
>-----------------
>http://www.codessentials.com<http://www.codessentials.com/> - Your essential
software, for
free!
>Follow us at http://twitter.com/#!/Codessentials
>
>
>_______________________________________________
rules-users mailing list
rules-users@lists.jboss.org<mailto:rules-users@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users@lists.jboss.org<mailto:rules-users@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/rules-users
12:55 a.m.
Hi Armand,
Thanks for the advice.
Well I managed to open the gz file with another decompression tool. No idea why 7-zip did
not manage.
I'll try to convert it with that ps2pdf tool.
Thanks!
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: "Welsh, Armand" <AWelsh(a)StateStreet.com>
To: Michiel Vermandel <mvermand(a)yahoo.com>; Rules Users List
<rules-users(a)lists.jboss.org>
Sent: Friday, February 22, 2013 8:01 PM
Subject: RE: [rules-users] Planner: Is it possible to know which move was selected on
step-end?
.ps.gz is a postscript file compressed using GZip. On windows you will need to find a
postscript viewer, or you can use the ps2pdf online tool to convert it to a pdf document.
And to uncompress the gz file you can either search for gzip (gunzip) or use Cygwin so
you can have the full Gnu suite available. There is a gzip for windows, but I am a little
confused, because I thought 7-Zip is able to expand the GZip files.
From:rules-users-bounces@lists.jboss.org [mailto:rules-users-bounces@lists.jboss.org] On
Behalf Of Michiel Vermandel
Sent: Friday, February 22, 2013 2:34 AM
To: Wolfgang Laun; Rules Users List
Subject: Re: [rules-users] Planner: Is it possible to know which move was selected on
step-end?
Thanks a lot.
Though when I try to open the archive with 7-Zip it says that it cannot open it.
I'm working on Windows7.
Any idea of tool I could use?
Thanks
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From:Wolfgang Laun <wolfgang.laun(a)gmail.com>
To: Michiel Vermandel <mvermand(a)yahoo.com>; Rules Users List
<rules-users(a)lists.jboss.org>
Sent: Friday, February 22, 2013 10:28 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was selected on
step-end?
Reminds me of a very fascinating paper
http://www-cs-faculty.stanford.edu/~uno/papers/dancing-color.ps.gz
(Note that the paper discusses puzzles where pieces may have one out
of a limited number of "shapes" resulting from all permitted
positions. I guess that's similar to what OP described.)
-W
On 22/02/2013, Michiel Vermandel <mvermand(a)yahoo.com> wrote:
Well,
I need to solve - let's say - a complex 2 dimensional puzzle.
The goal is to fill a 2D rectangle (with fixed dimensions) out of "puzzle
pieces" that do not have a fixed shape.
A puzzle piece is built out of a number of bars of variable length and the
bars can slide against each other (to some extend: differs per joint of two
bars).
Just shifting and swapping around the "puzzle pieces" is not quite well
performingsince that will result in many
violations although a shift or swap could match perfectly if you slide (some
of) the bars of the piece at the same time.
Feeding all possible combinations of shifts and swaps combined with all
possible forms of the pieces would result in ... well quite a lot of
combinations.
So I want to build a smarter mover that "knows" how to slide a piece in
order to fit it in an available place (or swap it with an other piece to
improve both pieces match).
I think the mover would perform far better if I have a "bit-map" that
contains the 2D representation of the way everything is placed and which
could calculate the best layout of the piece before putting it into the
puzzle.
Therefor I would like to know the last change applied so I can incrementally
update the bit-map instead of recalculating it entirely every time.
Hey, hmmm... maybe I don't need to know the last accepted move. Just finding
the diff between best-solution and previous best-solution might do the
trick?!
For finding the best layout of a single piece, ?could I use a second
instance of planner that does a "normal" bin-packaging of a single piece in
the available container (container is then an available free area or the
combination of one or more other pieces and the free space around that other
piece)?
Maybe I'm going goofy on this... too many long nights are beginning to cloud
my mind.
Well, any ideas are welcome.
Regards.
-----------------
http://www.codessentials.com - Your essential software, for free!
Follow us at http://twitter.com/#!/Codessentials
________________________________
From: Geoffrey De Smet <ge0ffrey.spam(a)gmail.com>
To: rules-users(a)lists.jboss.org
Sent: Thursday, February 21, 2013 10:37 AM
Subject: Re: [rules-users] Planner: Is it possible to know which move was
selected on step-end?
Officially, in the public api (aka the "user facing api"), there's no such
listener.
Why would you need this at runtime?
Open an issue: if there's a good reason to need this, we can talk
about adding it to the public api.
https://issues.jboss.org/browse/PLANNER
That being said and handled first, the benchmarker actually hacks a
step listener if I recall correctly:
https://github.com/droolsjbpm/drools-planner/tree/master/drools-planner-b...
Op 20-02-13 21:56, Michiel Vermandel schreef:
Hi,
>
>
>Is it possible to capture which move was selected on step-end?
>I don't mean in the logging but by event or custom selector or... ?
>
>
>
>Thanks
>
>
>Michiel
>
>
>-----------------
>http://www.codessentials.com - Your essential software, for
free!
>Follow us at http://twitter.com/#!/Codessentials
>
>
>_______________________________________________
rules-users mailing list rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
4087
days inactive
4092
days old
7 comments
4 participants
participants (4)
-
Geoffrey De Smet -
Michiel Vermandel -
Welsh, Armand -
Wolfgang Laun