August 2007 - jboss-user - Jboss List Archives

[Clustering/JBoss] - Re: Making 1 Jboss listen to 2 IPs

by moeity

Thank you, I read the link, and have tried adding the following attributes to my in cluster-service.xml bind_addr="192.168.128.100" receive_on_all_interfaces="true" send_on_all_interfaces="true" But I still see clustering errors. My machine is 192.168.128.100, and the other machine in the cluster is 192.168.128.83. They are both started with ./run.sh -b 0.0.0.0 -c all --partition=DefaultPartition -u 228.1.2.6, and both have made the changes above to cluster-service.xml. If I start the servers with the -b parameter as the true IP (192.168.128.100 and .83) then clustering works. If 0.0.0.0, then I see these errors: ERROR [UDP] failed sending message to 192.168.128.83:32961 (0 bytes) java.io.IOException: Invalid argument at java.net.PlainDatagramSocketImpl.send(Native Method) at java.net.DatagramSocket.send(DatagramSocket.java:612) at org.jgroups.protocols.UDP._send(UDP.java:338) at org.jgroups.protocols.UDP.sendToSingleMember(UDP.java:299) at org.jgroups.protocols.TP.doSend(TP.java:940) at org.jgroups.protocols.TP.send(TP.java:926) at org.jgroups.protocols.TP.down(TP.java:712) at org.jgroups.stack.Protocol.receiveDownEvent(Protocol.java:517) at org.jgroups.stack.Protocol.passDown(Protocol.java:551) at org.jgroups.protocols.Discovery.up(Discovery.java:246) at org.jgroups.stack.Protocol.receiveUpEvent(Protocol.java:488) at org.jgroups.stack.Protocol.passUp(Protocol.java:538) at org.jgroups.protocols.TP.handleIncomingMessage(TP.java:908) at org.jgroups.protocols.TP.handleIncomingPacket(TP.java:850) at org.jgroups.protocols.TP.access$400(TP.java:45) at org.jgroups.protocols.TP$IncomingPacketHandler.run(TP.java:1296) at java.lang.Thread.run(Thread.java:595) Any more tips, help, links appreciated, David View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078957#4078957 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078957

18 years, 7 months

1
0
0 / 0

[JBoss Portal] - Re: isUserInRole(String role) doesn't work

by chennaikar

I know that this question has been answered many times, but I cant seem to make it work so please help me. I read PLT.20.3 I have update portlet.xml and added my role | <security-role-ref> | <role-name>myrole</role-name> | <role-link>myrole</role-link> | </security-role-ref> | I have updated web.xml and added my role | <security-role> | <role-name>myrole</role-name> | </security-role> | I have entered the value in the jbp_roles table Since I am logging in against LDAP I am sure I am getting the role in the profile. Yet I do not get isUserInRole("myrole") == true Is there something I am missing? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078954#4078954 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078954

18 years, 7 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: mod_jk intermittently loosing connection to jboss 4.2

by modoc

Well, you can always use mod proxy_http, but yes, I still haven't been able to get AJP working properly under load. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078953#4078953 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078953

18 years, 7 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Re: mod_jk intermittently loosing connection to jboss 4.2

by steffejd

I've had the same problem since upgrading to JBoss 4.2.1 from 4.0.4 Adding the connection timeout in mod_jk helped it not happen as frequently, but it still happens. Changing the timeout for the ajp connection in the server.xml file for jboss web did nothing. I even made sure to install the newest version of the jk connector. I don't see any alternative but to go back to 4.0.x View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078952#4078952 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078952

18 years, 7 months

1
0
0 / 0

[Clustering/JBoss] - Re: Making 1 Jboss listen to 2 IPs

by bstansberry＠jboss.com

See http://wiki.jboss.org/wiki/Wiki.jsp?page=JGroupsUDP, discussion of "receive_on_all_interfaces". View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078951#4078951 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078951

18 years, 7 months

1
0
0 / 0

[Clustering/JBoss] - Making 1 Jboss listen to 2 IPs

by moeity

I'm using JBoss 4.2 together with a LVS Ultramonkey load balancing setup. My Jboss nodes have a virtual IP assigned, as well as the machine's true IP. I need my JBoss instance to listen and respond to both IPs. I have tried using -b 0.0.0.0, but that seems to cause JBoss clustering to fail. I could use either of two solutions: 1. A way for clustering to work while JBoss listens on 0.0.0.0 (all interfaces) 2. A way for JBoss to listen on two specific IPs. I've been unable to find documentation on this, and would really appreciate it if anyone could give me some pointers. Thanks, David View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078950#4078950 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078950

18 years, 7 months

1
0
0 / 0

[Installation, Configuration & DEPLOYMENT] - Where does Standard out go?

by kevin.hanrahan

When I do a thread dump within JBoss 4.0.5, using control break, I see the thread dump on the console, however it is not logged to the server.log file. How can I redirect standard out so that thread dumps are captured in the server.log? I understand that I can edit the start script and redirect standard out using the > server.log approach, however this leads to duplicate logs entries which I would like to avoid. View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078948#4078948 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078948

18 years, 7 months

1
0
0 / 0

[EJB 3.0] - Re: @Service register with JNDI

by ALRubinger

Yep. Use @LocalBinding or @RemoteBinding as appropriate on the Impl class or Interface, and set the "jndiBinding" attribute; the stub will be available in Global JNDI. S, ALR View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078945#4078945 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078945

18 years, 7 months

1
0
0 / 0

[JBoss Seam] - Re: Injection vs. property

by samdoyle

"pete.muir(a)jboss.org" wrote : Making Entities seam components isn't cluster safe IIRC So you recommend not using injection/bijection? View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078944#4078944 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078944

18 years, 7 months

1
0
0 / 0

[JBoss Seam] - Re: Injection vs. property

by pete.muir＠jboss.org

Making Entities seam components isn't cluster safe IIRC View the original post : http://www.jboss.com/index.html?module=bb&op=viewtopic&p=4078942#4078942 Reply to the post : http://www.jboss.com/index.html?module=bb&op=posting&mode=reply&p=4078942

18 years, 7 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-user August 2007