[JBoss JIRA] Created: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
3:32 a.m.
Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public (Everyone can see)
Components: jbossws-jaxws, ws-addressing
Affects Versions: jbossws-2.0.2, jbossws-1.2.1
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:57 a.m.
New subject: [JBoss JIRA] Updated: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
[ http://jira.jboss.com/jira/browse/JBWS-1938?page=all ]
Magesh Kumar B updated JBWS-1938:
---------------------------------
Fix Version/s: jbossws-2.1.0
Assign message name instead of IN and OUT for Inbound/Outbound
Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public(Everyone can see)
Components: ws-addressing, jbossws-jaxws
Affects Versions: jbossws-1.2.1, jbossws-2.0.2
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
Fix For: jbossws-2.1.0
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:38 a.m.
New subject: [JBoss JIRA] Updated: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
[ http://jira.jboss.com/jira/browse/JBWS-1938?page=all ]
Thomas Diesler updated JBWS-1938:
---------------------------------
Fix Version/s: jbossws-native-2.0.4
(was: jbossws-3.0.0)
Assign message name instead of IN and OUT for Inbound/Outbound
Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public(Everyone can see)
Components: ws-addressing, native-jaxws
Affects Versions: jbossws-1.2.1, jbossws-2.0.2
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
Fix For: jbossws-native-2.0.4
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:03 p.m.
New subject: [JBoss JIRA] Updated: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
[ http://jira.jboss.com/jira/browse/JBWS-1938?page=all ]
Magesh Kumar B updated JBWS-1938:
---------------------------------
Description:
When wsa:action is not set explicitly the builder just appends IN or OUT to the
endpoint's QName. This does not indicate as to what operation was perfomed when we
peek the SOAP Message header.
All along I was thinking that it worked fine for JAXWS tests, but it
has been hard-coded in JAXWSMetaDataBuilder.java:
// default action values
{
// TODO: figure out a way to assign message name instead of IN and OUT
String tns = epMetaData.getPortName().getNamespaceURI();
String portTypeName = epMetaData.getPortName().getLocalPart();
addrExt.setInboundAction(tns + "/" + portTypeName + "/IN");
if (!opMetaData.isOneWay())
addrExt.setOutboundAction(tns + "/" + portTypeName +
"/OUT");
}
Assign message name instead of IN and OUT for Inbound/Outbound
Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public(Everyone can see)
Components: ws-addressing, jbossws-native
Affects Versions: jbossws-1.2.1, jbossws-2.0.2
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
Fix For: jbossws-native-2.0.4
When wsa:action is not set explicitly the builder just appends IN or OUT to the
endpoint's QName. This does not indicate as to what operation was perfomed when we
peek the SOAP Message header.
All along I was thinking that it worked fine for JAXWS tests, but it
has been hard-coded in JAXWSMetaDataBuilder.java:
// default action values
{
// TODO: figure out a way to assign message name instead of IN and OUT
String tns = epMetaData.getPortName().getNamespaceURI();
String portTypeName = epMetaData.getPortName().getLocalPart();
addrExt.setInboundAction(tns + "/" + portTypeName + "/IN");
if (!opMetaData.isOneWay())
addrExt.setOutboundAction(tns + "/" + portTypeName +
"/OUT");
}
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:50 a.m.
New subject: [JBoss JIRA] Reopened: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
[ http://jira.jboss.com/jira/browse/JBWS-1938?page=all ]
Heiko Braun reopened JBWS-1938:
-------------------------------
Please double check with the WSA spec. I think IN/OUT is the required default.
Assign message name instead of IN and OUT for Inbound/Outbound
Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public(Everyone can see)
Components: ws-addressing, jbossws-native
Affects Versions: jbossws-1.2.1, jbossws-2.0.2
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
Fix For: jbossws-native-2.0.4
Time Spent: 3 hours
Remaining Estimate: 0 minutes
When wsa:action is not set explicitly the builder just appends IN or OUT to the
endpoint's QName. This does not indicate as to what operation was perfomed when we
peek the SOAP Message header.
All along I was thinking that it worked fine for JAXWS tests, but it
has been hard-coded in JAXWSMetaDataBuilder.java:
// default action values
{
// TODO: figure out a way to assign message name instead of IN and OUT
String tns = epMetaData.getPortName().getNamespaceURI();
String portTypeName = epMetaData.getPortName().getLocalPart();
addrExt.setInboundAction(tns + "/" + portTypeName + "/IN");
if (!opMetaData.isOneWay())
addrExt.setOutboundAction(tns + "/" + portTypeName +
"/OUT");
}
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:21 a.m.
New subject: [JBoss JIRA] Commented: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
[ http://jira.jboss.com/jira/browse/JBWS-1938?page=comments#action_12400137 ]
Heiko Braun commented on JBWS-1938:
-----------------------------------
I was wrong: Take a look here http://www.w3.org/TR/ws-addr-wsdl/#defactionwsdl11
For WSDL 1.1 it should be:
[target namespace][delimiter][port type name][delimiter][input|output name]
Assign message name instead of IN and OUT for Inbound/Outbound
Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public(Everyone can see)
Components: ws-addressing, jbossws-native
Affects Versions: jbossws-1.2.1, jbossws-2.0.2
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
Fix For: jbossws-native-2.0.4
Time Spent: 3 hours
Remaining Estimate: 0 minutes
When wsa:action is not set explicitly the builder just appends IN or OUT to the
endpoint's QName. This does not indicate as to what operation was perfomed when we
peek the SOAP Message header.
All along I was thinking that it worked fine for JAXWS tests, but it
has been hard-coded in JAXWSMetaDataBuilder.java:
// default action values
{
// TODO: figure out a way to assign message name instead of IN and OUT
String tns = epMetaData.getPortName().getNamespaceURI();
String portTypeName = epMetaData.getPortName().getLocalPart();
addrExt.setInboundAction(tns + "/" + portTypeName + "/IN");
if (!opMetaData.isOneWay())
addrExt.setOutboundAction(tns + "/" + portTypeName +
"/OUT");
}
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:53 a.m.
New subject: [JBoss JIRA] Reopened: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
[ http://jira.jboss.com/jira/browse/JBWS-1938?page=all ]
Magesh Kumar B reopened JBWS-1938:
----------------------------------
Sorry need to change interfaceName instead of portType
Assign message name instead of IN and OUT for Inbound/Outbound
Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public(Everyone can see)
Components: ws-addressing, jbossws-native
Affects Versions: jbossws-1.2.1, jbossws-2.0.2
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
Fix For: jbossws-native-2.0.4
Time Spent: 3 hours
Remaining Estimate: 0 minutes
When wsa:action is not set explicitly the builder just appends IN or OUT to the
endpoint's QName. This does not indicate as to what operation was perfomed when we
peek the SOAP Message header.
All along I was thinking that it worked fine for JAXWS tests, but it
has been hard-coded in JAXWSMetaDataBuilder.java:
// default action values
{
// TODO: figure out a way to assign message name instead of IN and OUT
String tns = epMetaData.getPortName().getNamespaceURI();
String portTypeName = epMetaData.getPortName().getLocalPart();
addrExt.setInboundAction(tns + "/" + portTypeName + "/IN");
if (!opMetaData.isOneWay())
addrExt.setOutboundAction(tns + "/" + portTypeName +
"/OUT");
}
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:03 a.m.
New subject: [JBoss JIRA] Commented: (JBWS-1938) Assign message name instead of IN and OUT for Inbound/Outbound Addressing Property
[ http://jira.jboss.com/jira/browse/JBWS-1938?page=comments#action_12400813 ]
Magesh Kumar B commented on JBWS-1938:
--------------------------------------
Fixed for WSDL1.1.
addrExt.setInboundAction(tns + "/" + portTypeName + "/" + opName +
"Request");
if (!opMetaData.isOneWay())
addrExt.setOutboundAction(tns + "/" + portTypeName + "/" + opName
+ "Response");
Assign message name instead of IN and OUT for Inbound/Outbound
Addressing Property
----------------------------------------------------------------------------------
Key: JBWS-1938
URL: http://jira.jboss.com/jira/browse/JBWS-1938
Project: JBoss Web Services
Issue Type: Bug
Security Level: Public(Everyone can see)
Components: ws-addressing, jbossws-native
Affects Versions: jbossws-1.2.1, jbossws-2.0.2
Reporter: Magesh Kumar B
Assigned To: Magesh Kumar B
Fix For: jbossws-native-2.0.4
Time Spent: 3 hours
Remaining Estimate: 0 minutes
When wsa:action is not set explicitly the builder just appends IN or OUT to the
endpoint's QName. This does not indicate as to what operation was perfomed when we
peek the SOAP Message header.
All along I was thinking that it worked fine for JAXWS tests, but it
has been hard-coded in JAXWSMetaDataBuilder.java:
// default action values
{
// TODO: figure out a way to assign message name instead of IN and OUT
String tns = epMetaData.getPortName().getNamespaceURI();
String portTypeName = epMetaData.getPortName().getLocalPart();
addrExt.setInboundAction(tns + "/" + portTypeName + "/IN");
if (!opMetaData.isOneWay())
addrExt.setOutboundAction(tns + "/" + portTypeName +
"/OUT");
}
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://jira.jboss.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
6119
days inactive
6198
days old
jbossws-issues@lists.jboss.org
7 comments
3 participants
participants (3)
-
Heiko Braun (JIRA) -
Magesh Kumar B (JIRA)
-
Thomas Diesler (JIRA)