Debug as within Eclipse
by chris richmond
I used the upate site to update my Eclipse Galileo IDE with the drools
tools, created a new drools project, had it add the hello/goodbye test class
and pointed my workspace to the 5.1M binaries. It runs fine, but when I
Debug As -> Drools Application I get the following errors. I get this error
for any drools project I try to debug as Drools application within Eclipse.
Any ideas?
Thanks,
CHris
FATAL ERROR in native method: JDWP No transports initialized,
jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: connect failed: Connection refused
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized
[../../../src/share/back/debugInit.c:690]
16 years, 2 months
Persistence issue using Oracle
by ramram
Hi All,
I have been using the H2 in memory database to test all my Drools Flow
scenarios using Guvnor and Gwt Console provided. And I have some questions
to ask and was wondering if someone can help. The main plan now is to switch
from using the H2 in memory database to Persist using the Oracle database.
1- What are the files that should be affected in this switch? or where
should I be looking into?
2- Are the tables created dynamically? and under which schema?
3- is there any test case implemented using this technology?
Thnx in advance for your help
Regards,
Ram
--
View this message in context: http://n3.nabble.com/Persistence-issue-using-Oracle-tp417257p417257.html
Sent from the Drools - User mailing list archive at Nabble.com.
16 years, 3 months
MVEL strict mode -- when, why?
by Barry Kaplan
I have never gotten any of my rules to compile using mvel strict mode. If I
leave the default I get spews of error messages that I can't make any sense
of. For example with:
---
package systeminsights.plugin.core.schedule
rule "foo"
when
eval(true)
then
// noop
end
---
I get messages like
[Error: Failed to compile: 3 compilation error(s):
- (1,21) unqualified type in strict mode for: plugin
- (1,26) unqualified type in strict mode for: core
- (1,35) unqualified type in strict mode for: schedule]
[Near : {... Unknown ....}]
^
[Line: 1, Column: 0]
If I set strict mode to false all is good.
So, what is actually going on with strict mode? And how does one interpret
messages such as the above?
-barry
--
View this message in context: http://n3.nabble.com/MVEL-strict-mode-when-why-tp95666p95666.html
Sent from the Drools - User mailing list archive at Nabble.com.
16 years, 3 months
RuleAgent in webservice
by shekharputtur puttur
Hi All,
I am using drools API, and developed a webservice out of it.
I created rule binary package using BRMS Guvnor.
I used RuleAgent to acces the properties file.
ie RuleAgent agent = RuleAgent.newRuleAgent("/
application.properties");
"application.properties" file was stored in current working directory.
I executed my application using eclipse, it was fine .
For testing purpose i deployed the application in tomcat application
server.
Now it is unable to find "application.properties" file. and shows following
in "catalina.out" file:
java.lang.NullPointerException
at java.util.Properties$LineReader.readLine(Properties.java:418)
at java.util.Properties.load0(Properties.java:337)
at java.util.Properties.load(Properties.java:325)
at org.drools.agent.RuleAgent.loadFromProperties(RuleAgent.java:299)
at org.drools.agent.RuleAgent.newRuleAgent(RuleAgent.java:256)
My question is, in which location should i keep the "application.properties"
file , so that RuleAgent can access it.
Could you please tell me the solution.
Thanks & Regards
Shekhar
16 years, 3 months
Exception handling policy
by Gerret Hansper
Hello,
I have got a question about Exception handling policy in Drools 5.0.
My issue is a case where a client application triggered rule execution on the
server, which was throwing a ConsequenceException.
The client, not having drools libs in its classpath, then had a
ClassNotFoundException.
I would therefore want to catch the ConsequenceException on the server and throw
an Exception with its cause.
I am not sure however if ConsequenceException.getCause() would always yield a
non-drools Exception or if that might be another drools type.
Also, is it always a ConsequenceException that gets thrown from a session or can
there be other Exception types?
Thanks,
Gerret
16 years, 3 months
Drools Roadmap - Planned Release 5.1 release date
by McDonald, Daniel
Hi,
I was wondering if there is a planned release date for Release 5.1?
Thank you,
Daniel McDonald
Fidelity National Information Services - Research & Development
Office phone: (972) 691-6593
Mobile phone (214) 697-8163
_____________
The information contained in this message is proprietary and/or confidential. If you are not the
intended recipient, please: (i) delete the message and all copies; (ii) do not disclose,
distribute or use the message in any manner; and (iii) notify the sender immediately. In addition,
please be aware that any message addressed to our domain is subject to archiving and review by
persons other than the intended recipient. Thank you.
_____________
16 years, 4 months
Drools memory usage issue
by Shah, Malay
Hi,
We have an drools 5.0.1 application that uses StatelessSession and high volume of objects (facts) that we need to apply static rules on, and having out of memory issues doing so. We added the following three properties as given in the drools documentation for decreasing the memory usage:
drools.shadowproxy=false
drools.maintainTms=false
drools.sequential=true
As per the following blog, there is an algorithm to minimize the engine work, and memory usage.
http://blog.athico.com/2007/07/sequential-rete.html
Are the properties above sufficient to trigger this algorithm, or do we need to do write extra code for this?
Also, does the "drools.sequential" property make sure that rules are applied sequentially on facts? If so, is there a hook into the drools engine to figure out which particular rule is consuming more memory or having more execution time?
Thanks in advance.
Malay Shah
--------------------------------------------------------------------------
NOTICE: If received in error, please destroy, and notify sender. Sender does not intend to waive confidentiality or privilege. Use of this email is prohibited when received in error. We may monitor and store emails to the extent permitted by applicable law.
16 years, 4 months
ClassCastException during inserting knowledge package
by Piotr Jedrychowski
Hello.
I have a problem with such scenario:
1) add one knowledge package (sensor200) with two rules:
package sensor200
rule "Sensor-200-ON"
when
(and f0: FMSensorFact(id==201) f1: FMSensorFact(id==202) )
(not FMFact(id==200))
then
FMFact factToInsert = new FMFact(200);
insert(factToInsert);
end
package sensor200
rule "Sensor-200-OFF"
when
not (and FMSensorFact(id==201) FMSensorFact(id==202) )
(factToRetract : FMFact(id==200))
then
retract(factToRetract);
end
2) remove knowledge package (sensor200)
3) add knowledge package with the same name as in point 1, but with
other rule:
package sensor200
rule "Sensor-200-OR-201-ON"
when
fact: FMSensorFact(id==201)
(not FMFact(id==200))
then
FMFact factToInsert = new FMFact(200);
insert(factToInsert);
end
During adding knowledge package in point 3, I'm getting
ClassCastException with this Stacktarce:
java.lang.ClassCastException: org.drools.util.ObjectHashMap
at org.drools.reteoo.AlphaNode.assertObject(AlphaNode.java:142)
at org.drools.reteoo.ObjectTypeNode.updateSink(ObjectTypeNode.java:252)
at org.drools.reteoo.AlphaNode.attach(AlphaNode.java:133)
at org.drools.reteoo.builder.BuildUtils.attachNode(BuildUtils.java:160)
at
org.drools.reteoo.builder.PatternBuilder.attachAlphaNodes(PatternBuilder.java:295)
at
org.drools.reteoo.builder.PatternBuilder.attachPattern(PatternBuilder.java:117)
at org.drools.reteoo.builder.PatternBuilder.build(PatternBuilder.java:70)
at
org.drools.reteoo.builder.GroupElementBuilder$NotBuilder.build(GroupElementBuilder.java:228)
at
org.drools.reteoo.builder.GroupElementBuilder.build(GroupElementBuilder.java:73)
at
org.drools.reteoo.builder.GroupElementBuilder$AndBuilder.build(GroupElementBuilder.java:126)
at
org.drools.reteoo.builder.GroupElementBuilder.build(GroupElementBuilder.java:73)
at
org.drools.reteoo.builder.ReteooRuleBuilder.addSubRule(ReteooRuleBuilder.java:153)
at
org.drools.reteoo.builder.ReteooRuleBuilder.addRule(ReteooRuleBuilder.java:126)
at org.drools.reteoo.ReteooBuilder.addRule(ReteooBuilder.java:117)
at org.drools.reteoo.ReteooRuleBase.addRule(ReteooRuleBase.java:362)
at org.drools.common.AbstractRuleBase.addRule(AbstractRuleBase.java:618)
at
org.drools.common.AbstractRuleBase.addPackages(AbstractRuleBase.java:500)
at org.drools.reteoo.ReteooRuleBase.addPackages(ReteooRuleBase.java:379)
at
org.drools.impl.KnowledgeBaseImpl.addKnowledgePackages(KnowledgeBaseImpl.java:121)
Maybe someone had similar problem and could help me?
I'm using:
* JBoss 4.2.3.GA
* Drools 5.0
Regards,
Piotr
16 years, 4 months
ANT Compile issues
by Bhamidi, Krishna
Hi,
I am using DROOLs 5.0.0 CR1 and use the compiler from Drools-Ant. When I attempt to execute the rules using a rule agent, I get an exception that in part reads
java.lang.NullPointerException
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1820)
(Full stack follows this e-mail.) However, when I download the pkg file for the same ruleset from Guvnor and use it in the rule agent, it runs fine.
I use the following for building -
<taskdef name="compiler" classname="org.drools.contrib.DroolsCompilerAntTask" classpathref="compiler.classpath" />
<compiler srcdir="../${rulesDirectory}" tofile="../${buildDirectory}/${projectName}_rules.pkg"
classpath="../${buildDirectory}/${projectName}_rules.jar"
binformat="package">
<include name="*.drl" />
<include name="*.brl" />
<include name="*.xml" />
<include name="*.dslr" />
<include name="*.xls" />
</compiler>
What I should do to compile correctly?
Full Stack
java.lang.NullPointerException
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1820)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at org.drools.rule.DialectRuntimeRegistry.readExternal(DialectRuntimeRegistry.java:41)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at org.drools.rule.Package.readExternal(Package.java:197)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at org.drools.util.DroolsStreamUtils.streamIn(DroolsStreamUtils.java:189)
at org.drools.util.DroolsStreamUtils.streamIn(DroolsStreamUtils.java:158)
at org.drools.agent.FileScanner.readPackage(FileScanner.java:136)
at org.drools.agent.FileScanner.getChangeSet(FileScanner.java:82)
at org.drools.agent.FileScanner.loadPackageChanges(FileScanner.java:56)
at org.drools.agent.DirectoryScanner.loadPackageChanges(DirectoryScanner.java:69)
at org.drools.agent.RuleAgent.checkForChanges(RuleAgent.java:410)
at org.drools.agent.RuleAgent.refreshRuleBase(RuleAgent.java:362)
at org.drools.agent.RuleAgent.configure(RuleAgent.java:347)
at org.drools.agent.RuleAgent.init(RuleAgent.java:247)
at org.drools.agent.RuleAgent.newRuleAgent(RuleAgent.java:187)
at org.drools.agent.RuleAgent.newRuleAgent(RuleAgent.java:147)
16 years, 4 months
