February 2021 - jboss-jira - Jboss List Archives

[Red Hat JIRA] (WFLY-14380) Cant configure Let's Encrypt simple steps

by erick leal (Jira)

[ https://issues.redhat.com/browse/WFLY-14380?page=com.atlassian.jira.plugi... ] erick leal edited comment on WFLY-14380 at 2/6/21 10:18 AM: ------------------------------------------------------------ Ok, I tried again today and I think I was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I access via HTTPS a page with some JSON info is shown and anotther old certificate is shown, not issued to the domain I typed in command. If I access via IP the certificate is the one I created. Another small thing is that when it finished the server was rebooted instead of only update the certificate... !ddd.PNG! !Capturar-1.PNG|thumbnail! was (Author: erick.de.oliveira.leal): Ok, I tried again today and I think I was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I access via HTTPS a page with some JSON info is shown and anotther old certificate is shown, not issued to the domain I typed in command. If I access via IP the certificate is the one I created. !ddd.PNG! !Capturar-1.PNG|thumbnail! > Cant configure Let's Encrypt simple steps > ----------------------------------------- > > Key: WFLY-14380 > URL: https://issues.redhat.com/browse/WFLY-14380 > Project: WildFly > Issue Type: Bug > Components: Security > Affects Versions: 22.0.0.Final > Reporter: erick leal > Priority: Major > Attachments: Capturar-1.PNG, Capturar.PNG, Capturar5-1.PNG, Capturar5.PNG, ddd.PNG > > > I'm tyring to configure Let's Encrypt in my server, and I followed instructions that said to simple type security enable-ssl-http-server --interactive --lets-encrypt > But I believe because I'm in Windows I ran into the issue described in the picture below > !Capturar.PNG! -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (WFLY-14380) Cant configure Let's Encrypt simple steps

by erick leal (Jira)

[ https://issues.redhat.com/browse/WFLY-14380?page=com.atlassian.jira.plugi... ] erick leal edited comment on WFLY-14380 at 2/6/21 10:08 AM: ------------------------------------------------------------ Ok, I tried again today and I think I was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I access via HTTPS a page with some JSON info is shown and anotther old certificate is shown, not issued to the domain I typed in command. If I access via IP the certificate is the one I created. !ddd.PNG! !Capturar-1.PNG|thumbnail! was (Author: erick.de.oliveira.leal): Ok, I tried again today and I think I was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I use HTTPS a page with some Json info is shown and the certificate is not issued to the domain I typed in command. !ddd.PNG! !Capturar-1.PNG|thumbnail! > Cant configure Let's Encrypt simple steps > ----------------------------------------- > > Key: WFLY-14380 > URL: https://issues.redhat.com/browse/WFLY-14380 > Project: WildFly > Issue Type: Bug > Components: Security > Affects Versions: 22.0.0.Final > Reporter: erick leal > Priority: Major > Attachments: Capturar-1.PNG, Capturar.PNG, Capturar5-1.PNG, Capturar5.PNG, ddd.PNG > > > I'm tyring to configure Let's Encrypt in my server, and I followed instructions that said to simple type security enable-ssl-http-server --interactive --lets-encrypt > But I believe because I'm in Windows I ran into the issue described in the picture below > !Capturar.PNG! -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (DROOLS-6001) DMN Validation, wrong human friendly message of contraction

by Matteo Mortari (Jira)

Matteo Mortari created DROOLS-6001: -------------------------------------- Summary: DMN Validation, wrong human friendly message of contraction Key: DROOLS-6001 URL: https://issues.redhat.com/browse/DROOLS-6001 Project: Drools Issue Type: Bug Components: dmn engine Reporter: Matteo Mortari Assignee: Matteo Mortari Attachments: framingham.dmn {code} [INFO] analysis for decision table 'SBP score': [WARNING] Table is not fully contracted. Combine rules [2, 3, 19, 20, 8, 9, 14, 15] by joining input 1. [WARNING] Second Normal Form Violation: Input 1 is irrelevant for rules [2, 3, 19, 20, 8, 9, 14, 15]. Consider combining these rules over the irrelevant input {code} -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (WFLY-14380) Cant configure Let's Encrypt simple steps

by erick leal (Jira)

[ https://issues.redhat.com/browse/WFLY-14380?page=com.atlassian.jira.plugi... ] erick leal edited comment on WFLY-14380 at 2/6/21 9:59 AM: ----------------------------------------------------------- Ok, I tried again today and I think I was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I use HTTPS a page with some Json info is shown and the certificate is not issued to the domain I typed in command. !ddd.PNG! !Capturar-1.PNG|thumbnail! was (Author: erick.de.oliveira.leal): Ok, I tried again today and I think I was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I use HTTPS a page with some Json info is shown and the certificate is not issued to the domain I typed in command. !ddd.PNG! !Capturar.PNG! > Cant configure Let's Encrypt simple steps > ----------------------------------------- > > Key: WFLY-14380 > URL: https://issues.redhat.com/browse/WFLY-14380 > Project: WildFly > Issue Type: Bug > Components: Security > Affects Versions: 22.0.0.Final > Reporter: erick leal > Priority: Major > Attachments: Capturar-1.PNG, Capturar.PNG, ddd.PNG > > > I'm tyring to configure Let's Encrypt in my server, and I followed instructions that said to simple type security enable-ssl-http-server --interactive --lets-encrypt > But I believe because I'm in Windows I ran into the issue described in the picture below > !Capturar.PNG! -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (WFLY-14380) Cant configure Let's Encrypt simple steps

by erick leal (Jira)

[ https://issues.redhat.com/browse/WFLY-14380?page=com.atlassian.jira.plugi... ] erick leal edited comment on WFLY-14380 at 2/6/21 9:59 AM: ----------------------------------------------------------- Ok, I tried again today and I think I was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I use HTTPS a page with some Json info is shown and the certificate is not issued to the domain I typed in command. !ddd.PNG! !Capturar.PNG! was (Author: erick.de.oliveira.leal): Ok, I tried again today and I think I !ddd.PNG! was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I use HTTPS a page with some Json info is shown and the certificate is not issued to the domain I typed in command. !Capturar.PNG! > Cant configure Let's Encrypt simple steps > ----------------------------------------- > > Key: WFLY-14380 > URL: https://issues.redhat.com/browse/WFLY-14380 > Project: WildFly > Issue Type: Bug > Components: Security > Affects Versions: 22.0.0.Final > Reporter: erick leal > Priority: Major > Attachments: Capturar-1.PNG, Capturar.PNG, ddd.PNG > > > I'm tyring to configure Let's Encrypt in my server, and I followed instructions that said to simple type security enable-ssl-http-server --interactive --lets-encrypt > But I believe because I'm in Windows I ran into the issue described in the picture below > !Capturar.PNG! -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (WFLY-14380) Cant configure Let's Encrypt simple steps

by erick leal (Jira)

[ https://issues.redhat.com/browse/WFLY-14380?page=com.atlassian.jira.plugi... ] erick leal commented on WFLY-14380: ----------------------------------- Ok, I tried again today and I think I !ddd.PNG! was able to create the certificate. But there are some issues, that I don't know if they are related to Wildfly. When I enter my site via http is ok. But when I use HTTPS a page with some Json info is shown and the certificate is not issued to the domain I typed in command. !Capturar.PNG! > Cant configure Let's Encrypt simple steps > ----------------------------------------- > > Key: WFLY-14380 > URL: https://issues.redhat.com/browse/WFLY-14380 > Project: WildFly > Issue Type: Bug > Components: Security > Affects Versions: 22.0.0.Final > Reporter: erick leal > Priority: Major > Attachments: Capturar-1.PNG, Capturar.PNG, ddd.PNG > > > I'm tyring to configure Let's Encrypt in my server, and I followed instructions that said to simple type security enable-ssl-http-server --interactive --lets-encrypt > But I believe because I'm in Windows I ran into the issue described in the picture below > !Capturar.PNG! -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (WFLY-14380) Cant configure Let's Encrypt simple steps

by erick leal (Jira)

[ https://issues.redhat.com/browse/WFLY-14380?page=com.atlassian.jira.plugi... ] erick leal updated WFLY-14380: ------------------------------ Attachment: ddd.PNG > Cant configure Let's Encrypt simple steps > ----------------------------------------- > > Key: WFLY-14380 > URL: https://issues.redhat.com/browse/WFLY-14380 > Project: WildFly > Issue Type: Bug > Components: Security > Affects Versions: 22.0.0.Final > Reporter: erick leal > Priority: Major > Attachments: Capturar-1.PNG, Capturar.PNG, ddd.PNG > > > I'm tyring to configure Let's Encrypt in my server, and I followed instructions that said to simple type security enable-ssl-http-server --interactive --lets-encrypt > But I believe because I'm in Windows I ran into the issue described in the picture below > !Capturar.PNG! -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (WFLY-14380) Cant configure Let's Encrypt simple steps

by erick leal (Jira)

[ https://issues.redhat.com/browse/WFLY-14380?page=com.atlassian.jira.plugi... ] erick leal updated WFLY-14380: ------------------------------ Attachment: Capturar-1.PNG > Cant configure Let's Encrypt simple steps > ----------------------------------------- > > Key: WFLY-14380 > URL: https://issues.redhat.com/browse/WFLY-14380 > Project: WildFly > Issue Type: Bug > Components: Security > Affects Versions: 22.0.0.Final > Reporter: erick leal > Priority: Major > Attachments: Capturar-1.PNG, Capturar.PNG > > > I'm tyring to configure Let's Encrypt in my server, and I followed instructions that said to simple type security enable-ssl-http-server --interactive --lets-encrypt > But I believe because I'm in Windows I ran into the issue described in the picture below > !Capturar.PNG! -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (ELY-2082) Optimise Tool Help Text

by Darran Lofthouse (Jira)

[ https://issues.redhat.com/browse/ELY-2082?page=com.atlassian.jira.plugin.... ] Darran Lofthouse updated ELY-2082: ---------------------------------- Summary: Optimise Tool Help Text (was: Optomise Tool Help Text) > Optimise Tool Help Text > ----------------------- > > Key: ELY-2082 > URL: https://issues.redhat.com/browse/ELY-2082 > Project: WildFly Elytron > Issue Type: Task > Components: Command-Line Tool > Reporter: Darran Lofthouse > Priority: Major > Attachments: tool-help.txt > > > Attached to this issue is the present help test from the tool when called with no arguments, it is already very verbose and new commands are in the process of being added making it even longer. > We should switch to some kind of tiered help so by default we just show the stop level commands with a description and provide instructions to obtain help text on the individual commands. > Secondly the wrapping of text makes us hard to read - even on a widescreen monitor. If we could detect the width of the terminal window maybe we could more dynamically format the output. Failing that maybe we should determine a minimum width to view the output and ensure we format cleanly within the width. > We could also go further and ensure each command has a reference manual published from the Elytron project that can be referred to with a http link - or could the tool trigger loading the link? > -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

[Red Hat JIRA] (ELY-2082) Optomise Tool Help Text

by Darran Lofthouse (Jira)

Darran Lofthouse created ELY-2082: ------------------------------------- Summary: Optomise Tool Help Text Key: ELY-2082 URL: https://issues.redhat.com/browse/ELY-2082 Project: WildFly Elytron Issue Type: Task Components: Command-Line Tool Reporter: Darran Lofthouse Attachments: tool-help.txt Attached to this issue is the present help test from the tool when called with no arguments, it is already very verbose and new commands are in the process of being added making it even longer. We should switch to some kind of tiered help so by default we just show the stop level commands with a description and provide instructions to obtain help text on the individual commands. Secondly the wrapping of text makes us hard to read - even on a widescreen monitor. If we could detect the width of the terminal window maybe we could more dynamically format the output. Failing that maybe we should determine a minimum width to view the output and ensure we format cleanly within the width. We could also go further and ensure each command has a reference manual published from the Elytron project that can be referred to with a http link - or could the tool trigger loading the link? -- This message was sent by Atlassian Jira (v8.13.1#813001)

5 years, 2 months

1
0
0 / 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

jboss-jira February 2021