[jbossnative-commits] JBoss Native SVN: r1868 - in trunk/mod_cluster: src/test and 8 other directories.

Author: pferraro Date: 2008-09-18 18:55:29 -0400 (Thu, 18 Sep 2008) New Revision: 1868 Added: trunk/mod_cluster/build-test.xml trunk/mod_cluster/local.properties trunk/mod_cluster/src/test/resources/ trunk/mod_cluster/src/test/resources/test-configs/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-httpd/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-httpd/conf/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-httpd/conf/mod-cluster-httpd.conf trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-httpd/modules/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/META-INF/ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/META-INF/jboss-beans.xml trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/server.xml trunk/mod_cluster/test-jars.xml Modified: trunk/mod_cluster/pom.xml Log: Modifications from Brian to support integration testing Added: trunk/mod_cluster/build-test.xml =================================================================== --- trunk/mod_cluster/build-test.xml (rev 0) +++ trunk/mod_cluster/build-test.xml 2008-09-18 22:55:29 UTC (rev 1868) @@ -0,0 +1,443 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!--======================================================================--> +<!-- --> +<!-- JBoss, the OpenSource J2EE webOS --> +<!-- --> +<!-- Distributable under LGPL license. --> +<!-- See terms of license at http://www.gnu.org. --> +<!-- --> +<!--======================================================================--> +<project default="main" name="JBoss/mod_cluster Tests" xmlns:server="http://jboss.org/ns/test/ant/server"> + + <!-- ======================================================== --> + <!-- Initialization --> + <!-- ======================================================== --> + <tstamp> + <format property="TIMENOW" pattern="yyyy-MM-dd.HH-mm" timezone="GMT" /> + </tstamp> + <echo message="${TIMENOW}" file="run.tstamp" /> + + <!-- =================== --> + <!-- Basic Configuration --> + <!-- =================== --> + + <property name="results_web" value="http://jboss.sourceforge.net/junit-results/32" /> + <property name="buildlog.level" value="info" /> + <property environment="env" /> + + <!-- + Set a hostname property based on COMPUTERNAME for win32, HOSTNAME + otherwise and initialize the node0/node1 cluster hostnames to + localhost and ${hostname} by default. If you cannot route multicast + traffic between localhost and hostname, then you need to specify node0 + and node1 binding in the local.properties that can in order to be able + to run the clustering tests. + --> + <condition property="hostname" value="${env.COMPUTERNAME}"> + <os family="windows" /> + </condition> + <condition property="hostname" value="${env.HOSTNAME}"> + <not> + <os family="windows" /> + </not> + </condition> + + <!-- + We will use local.properties file to provide some configuration to the + testsuite mainly for the Clustering framework. Please do not checkin + your local.properties file into CVS + --> + <property file="local.properties" /> + + <!-- Cluster node defaults --> + <property name="node0" value="localhost" /> + <property name="node0.http.url" value="http://${node0}:8080" /> + <property name="node0.jndi.url" value="jnp://${node0}:1099" /> + <property name="node0.jndi.port1.url" value="jnp://${node0}:1199" /> + <property name="node0.http.port1.url" value="http://${node0}:8180" /> + <property name="node0.jgroups.bind_addr" value="${node0}" /> + <property name="node1" value="${hostname}" /> + <property name="node1.http.url" value="http://${node1}:8080" /> + <property name="node1.jndi.url" value="jnp://${node1}:1099" /> + <property name="node1.jgroups.bind_addr" value="${node1}" /> + <property name="node2" value="${env.MYTESTIP_3}" /> + <property name="node2.http.url" value="http://${node2}:8080" /> + <property name="node2.jndi.url" value="jnp://${node2}:1099" /> + <property name="node2.jgroups.bind_addr" value="${node2}" /> + <property name="node3" value="${env.MYTESTIP_4}" /> + <property name="node3.http.url" value="http://${node3}:8080" /> + <property name="node3.jndi.url" value="jnp://${node3}:1099" /> + <property name="node3.jgroups.bind_addr" value="${node3}" /> + + <!-- UDP Group, must be done before server-config.xml --> + <!-- The value of the -u option passed to jboss --> + <!-- A blank value will prevent the -u option from being passed --> + <!-- + Override this in the local.properties or pass to Ant as + -DupdGroup=128.x.x.x + --> + <property name="udpGroup" value="" /> + <!-- Same thing, but passed to the client --> + <property name="jbosstest.udpGroup" value="${udpGroup}" /> + + <!-- Set "jboss.dist" to JBOSS_HOME --> + <property name="jboss.dist" value="${env.JBOSS_HOME}" /> + + <!-- Propagate the dist directory as a jbosstest system property --> + <property name="jbosstest.dist" value="${jboss.dist}" /> + + <!-- Externalized locations --> + <property name="location.resources.main" value="${basedir}/src/main/resources" /> + <property name="location.resources.test" value="${basedir}/src/test/resources" /> + <property name="location.target" value="${basedir}/target" /> + <property name="location.artifact.tests" value="${location.target}/jboss-ejb3-testsuite-tests.jar" /> + <property name="location.dependencies" value="${location.target}/dependencies" /> + <property name="location.dependencies.unpacked" value="${location.dependencies}/unpacked" /> + <property name="location.dependencies.unpacked.jboss-test:jboss.test" value="${location.dependencies.unpacked}/jboss-test" /> + <property name="location.dependencies.lib" value="${location.dependencies}/lib" /> + <property name="location.dependencies.lib.jboss-test:jboss-test" value="${location.dependencies.lib}/jboss-test.jar" /> + <property name="location.dependencies.lib.org.jboss.jbossas:server-manager" value="${location.dependencies.lib}/jboss-server-manager.jar" /> + <property name="location.dependencies.lib.junit:junit" value="${location.dependencies.lib}/junit.jar" /> + <property name="location.dependencies.lib.apache-httpclient:commons-httpclient" value="${location.dependencies.lib}/commons-httpclient.jar" /> + <property name="location.client.lib" value="${jboss.dist}/client"/> + <property name="location.apache.httpd" value="/usr/sbin"/> + <property name="location.apache.serverroot" value="${user.home}/httpd"/> + <property name="location.apache.config" value="conf/mod-cluster-httpd.conf"/> + + <!-- Import the jboss server run targets --> + <import file="${location.dependencies.unpacked.jboss-test:jboss.test}/server-config.xml" /> + + <!-- Module name(s) & version --> + <property name="module.name" value="ejb3" /> + <property name="module.Name" value="JBoss Testsuite" /> + <property name="module.version" value="DEV" /> + <property name="module.source" value="${basedir}/src" /> + <property name="module.output" value="${basedir}/target" /> + + <!-- Where source files live --> + <property name="source.resources" value="${module.source}/test/resources"/> + + <!-- Where build generated files will go --> + <property name="build.classes" value="${module.output}/classes"/> + <property name="build.lib" value="${module.output}/lib"/> + <property name="build.resources" value="${module.output}/resources"/> + <property name="build.reports" value="${module.output}/reports"/> + <property name="build.testlog" value="${module.output}/log"/> + + <!-- Define common JVM Arguments for all mod-cluster JBossAS Runtimes --> + <property name="mod_cluster.jboss.jvmargs" + value="-Xms128m -Xmx512m -XX:MaxPermSize=256m -Dorg.jboss.resolver.warning=true -Djava.net.preferIPv4Stack=true -Dresolve.dns=false" /> + + <property name="junit.timeout" value="300000"/> + + <!-- + Define Server Configurations for mod_cluster Integration Tests + --> + <server:config javaHome="${env.JAVA_HOME}" jbossHome="${jboss.dist}" + udpGroup="${udpGroup}"> + + <server name="mod-cluster-0" host="${node0}"> + <jvmarg value="${mod_cluster.jboss.jvmargs}" /> + <sysproperty key="java.endorsed.dirs" value="${jboss.dist}/lib/endorsed" /> + <sysproperty key="jgroups.udp.ip_ttl" value="${jbosstest.udp.ip_ttl}" /> + <sysproperty key="jboss.messaging.ServerPeerID" value="0" /> + </server> + + <server name="mod-cluster-1" host="${node1}"> + <jvmarg value="${mod_cluster.jboss.jvmargs}" /> + <sysproperty key="java.endorsed.dirs" value="${jboss.dist}/lib/endorsed" /> + <sysproperty key="jgroups.udp.ip_ttl" value="${jbosstest.udp.ip_ttl}" /> + <sysproperty key="jboss.messaging.ServerPeerID" value="1" /> + </server> + + <server name="mod-cluster-2" host="${node2}"> + <jvmarg value="${mod_cluster.jboss.jvmargs}" /> + <sysproperty key="java.endorsed.dirs" value="${jboss.dist}/lib/endorsed" /> + <sysproperty key="jgroups.udp.ip_ttl" value="${jbosstest.udp.ip_ttl}" /> + <sysproperty key="jboss.messaging.ServerPeerID" value="2" /> + </server> + + <server name="mod-cluster-3" host="${node3}"> + <jvmarg value="${mod_cluster.jboss.jvmargs}" /> + <sysproperty key="java.endorsed.dirs" value="${jboss.dist}/lib/endorsed" /> + <sysproperty key="jgroups.udp.ip_ttl" value="${jbosstest.udp.ip_ttl}" /> + <sysproperty key="jboss.messaging.ServerPeerID" value="3" /> + </server> + + </server:config> + + <!-- ===================== --> + <!-- Paths and Patternsets --> + <!-- ===================== --> + + <!-- Define test Classpath --> + <path id="jboss.test.classpath"> + <pathelement path="${jboss.test.path}" /> + </path> + + <!-- Classpath used by the Test Client --> + <path id="client.classpath"> + + <!-- JBoss Client Binaries --> + + </path> + + <!-- + Define the Path to Server Task Definitions, used by the JBoss Server + Run targets + --> + <path id="server.taskdef.classpath"> + <pathelement path="${location.dependencies.lib.jboss-test:jboss-test}" /> + <pathelement + path="${location.dependencies.lib.org.jboss.jbossas:server-manager}" /> + </path> + + <patternset id="jboss.server.all.includes"> + <include name="conf/**" /> + <include name="deploy/**" /> + <include name="deployers/**" /> + <include name="deploy-hasingleton/**" /> + <include name="lib/**" /> + </patternset> + + <!-- Define the test pattern sets Here --> + <patternset id="apache.integration.test.includes"> + <include name="org/jboss/modcluster/test/*TestCase.class" /> + </patternset> + + <!-- Add exclude elements for any tests that should be excluded --> + <patternset id="badtest.excludes"/> + + <!-- ============================================== --> + <!-- Macros --> + <!-- ============================================== --> + + <macrodef name="httpd"> + <attribute name="location" default="/usr/sbin"/> + <attribute name="action-type" default="start"/> + <attribute name="server-root"/> + <attribute name="config" default="conf/mod-cluster-httpd.conf"/> + <attribute name="failonerror" default="true"/> + + <sequential> + <echo message="Will @{action-type} the apache instance at @{location} using -d @{server-root} -f @{config}"/> + <echo message="If you need apache to run on port 80, then"/> + <echo message="you need to start apache with admin/root rights."/> + <echo message="If so, start/stop apache independent of this testsuite"/> + <exec executable="@{location}/httpd" + failonerror="@{failonerror}" failifexecutionfails="@{failonerror}"> + <arg value="-k"/> + <arg value="@{action-type}"/> + <arg value="-d"/> + <arg value="@{server-root}"/> + <arg value="-f"/> + <arg value="@{config}"/> + </exec> + </sequential> + </macrodef> + + <macrodef name="create-httpd"> + <attribute name="server-root" description="the httpd serverroot to which newconf-src should be copied"/> + <attribute name="newconf-src" description="The name of the tests-config to copy"/> + <sequential> + <echo message="Updating httpd config at @{server-root}" /> + <copy todir="@{server-root}" overwrite="true" failonerror="false"> + <fileset dir="${build.resources}/test-configs/@{newconf-src}" /> + </copy> + </sequential> + </macrodef> + + <!-- ============================================== --> + <!-- Targets --> + <!-- ============================================== --> + + <!-- Import the test jars build targets --> + <import file="test-jars.xml"/> + + <!-- "main" is the default target; depends on "jars" which is imported + from test-jars.xml --> + <target name="main" + description="Executes the default target (jars)." + depends="jars"/> + + <target name="init"> + <record name="${basedir}/build.log" append="yes" action="start" loglevel="error"/> + </target> + + <!-- Compile resource files --> + <target name="compile-resources"> + <mkdir dir="${build.resources}"/> + <copy todir="${build.resources}" filtering="no"> + <fileset dir="${source.resources}"> + <include name="**/*"/> + </fileset> + </copy> + </target> + + <target name="tests-apache-integration" + description="Execute integration tests requiring an apache load balanced two JBoss nodes."> + + <!-- Determine whether we are configured to ignore failures and + pass the appropriate property to tests-clustering-junit. + One property we check below and fail the build; the other is ignored. + --> + <condition property="apache.integration.junit.failure.property" + value="apache.integration.junit.failure" + else="apache.integration.junit.failure.ignored"> + <and> + <isset property="ignore.integration.test.failures"/> + <equals arg1="${ignore.integration.test.failures}" arg2="true" casesensitive="false" trim="true"/> + </and> + </condition> + + <echo message="Setting up httpd config in ${location.apache.serverroot}"/> + <create-httpd server-root="${location.apache.serverroot}" newconf-src="mod-cluster-httpd"/> + + <create-config baseconf="all" newconf="mod-cluster-0" newconf-src="mod-cluster-jbossas"> + <patternset id="jboss.server.all.includes"> + <include name="conf/**" /> + <include name="deploy/**" /> + <include name="deployers/**" /> + <include name="deploy-hasingleton/**" /> + <include name="lib/**" /> + </patternset> + </create-config> + + <create-config baseconf="all" newconf="mod-cluster-1" newconf-src="mod-cluster-jbossas"> + <patternset id="jboss.server.all.includes"> + <include name="conf/**" /> + <include name="deploy/**" /> + <include name="deployers/**" /> + <include name="deploy-hasingleton/**" /> + <include name="lib/**" /> + </patternset> + </create-config> + + <httpd location="${location.apache.httpd}" server-root="${location.apache.serverroot}" + config="${location.apache.config}" action-type="start" /> + + + <server:start name="mod-cluster-0" /> + <server:start name="mod-cluster-1" /> + + <echo message="Nodes have started, waiting for cluster to stablize..." /> + + <echo message="Going to call target tests-clustering-unit" /> + + <antcall target="tests-clustering-unit"> + <param name="cluster.includes.refid" value="apache.integration.test.includes" /> + <param name="jboss-junit-configuration" value="ModCluster" /> + <param name="tests-clustering-unit.failure.property" value="${apache.integration.junit.failure.property}"/> + </antcall> + + <server:stop name="mod-cluster-0" /> + <server:stop name="mod-cluster-1" /> + + <httpd location="${location.apache.httpd}" server-root="${location.apache.serverroot}" + config="${location.apache.config}" action-type="stop" /> + + <!-- See if junit set the failure property that triggers build failure --> + <fail message="JUnit tests failed; see test reports for details" if="apache.integration.junit.failure"/> + + </target> + + <!-- Executes a set of tests in a clustered environment --> + <target name="tests-clustering-unit"> + + <mkdir dir="${build.reports}" /> + <mkdir dir="${build.testlog}" /> + <junit dir="${module.output}" printsummary="on" + haltonerror="false" haltonfailure="false" + fork="true" + timeout="${junit.timeout}" + failureProperty="${tests-clustering-unit.failure.property}"> + + <sysproperty key="java.net.preferIPv4Stack" value="true" /> + + <sysproperty key="jboss.internal-server.serverroot" + value="${jboss.dist}/server" /> + <sysproperty key="jbosstest.deploy.dir" file="${build.lib}" /> + <sysproperty key="jbosstest.cluster.node0" value="${node0}" /> + <sysproperty key="jbosstest.cluster.node0.http.url" + value="${node0.http.url}" /> + <sysproperty key="jbosstest.cluster.node0.jndi.url" + value="${node0.jndi.url}" /> + <sysproperty key="jbosstest.cluster.node0.serverroot" + value="${jboss.dist}/server/${jbosstest.cluster.node0.config}" /> + <sysproperty key="jbosstest.cluster.node1" value="${node1}" /> + <sysproperty key="jbosstest.cluster.node1.http.url" + value="${node1.http.url}" /> + <sysproperty key="jbosstest.cluster.node1.jndi.url" + value="${node1.jndi.url}" /> + <sysproperty key="jbosstest.cluster.node1.serverroot" + value="${jboss.dist}/server/${jbosstest.cluster.node1.config}" /> + <sysproperty key="build.testlog" value="${build.testlog}" /> + <sysproperty key="log4j.configuration" value="file:${build.resources}/log4j.xml" /> + <!-- Pass along any jbosstest.* system properties --> + <syspropertyset> + <propertyref prefix="jbosstest." /> + </syspropertyset> + + <!-- + Lets pass some parameters from local.properties file as system + properties + --> + <syspropertyset> + <propertyref prefix="org.apache." /> + </syspropertyset> + <syspropertyset> + <propertyref prefix="apache" /> + </syspropertyset> + <syspropertyset> + <propertyref prefix="node" /> + </syspropertyset> + + <!-- + jvmarg value="${junit.jvm.options}"/> <jvmarg + value="-Xrunjdwp:transport=dt_socket,address=8789,server=y,suspend=y"/> + <jvmarg value="-Djava.compiler=NONE"/> <jvmarg value="-Xdebug"/> + <jvmarg value="-Xnoagent"/ + --> + + <classpath> + <pathelement location="${build.classes}" /> + <pathelement location="${build.resources}" /> + <path refid="tests.classpath" /> + </classpath> + + <!-- + definition of the property for keeping results between configuration + --> + <sysproperty key="jboss-junit-configuration" value="${jboss-junit-configuration}" /> + <formatter classname="org.jboss.ant.taskdefs.XMLJUnitMultipleResultFormatter" + usefile="${junit.formatter.usefile}" extension="-${jboss-junit-configuration}.xml" /> + + <batchtest todir="${build.reports}" haltonerror="false" + haltonfailure="false" fork="true"> + + <fileset dir="${build.classes}"> + <patternset refid="${cluster.includes.refid}" /> + <patternset refid="badtest.excludes" /> + </fileset> + </batchtest> + </junit> + </target> + + <!-- Launches a test assuming the AS instances are already running --> + <target name="one-cluster-test-nostart" if="test"> + + <property name="jboss-junit-configuration" value="ModCluster" /> + + <echo message="Going to call target tests-clustering-unit for ${test}" /> + + <antcall target="tests-clustering-unit"> + <param name="cluster.includes.refid" value="one.test.includes" /> + <param name="jboss-junit-configuration" value="${jboss-junit-configuration}" /> + <param name="jbosstest.cluster.web.cache.config" value="standard-session-cache" /> + <param name="jbosstest.cluster.node0.config" value="mod-cluster-0" /> + <param name="jbosstest.cluster.node1.config" value="mod-cluster-1" /> + </antcall> + + </target> + +</project> \ No newline at end of file Added: trunk/mod_cluster/local.properties =================================================================== --- trunk/mod_cluster/local.properties (rev 0) +++ trunk/mod_cluster/local.properties 2008-09-18 22:55:29 UTC (rev 1868) @@ -0,0 +1,84 @@ +#IMPORTANT:- Please do not check this file into CVS with your local changes +#This file is used to pass config info to targets like apache_tomcat-clustering tests +#Please uncomment or add your properties to this file. + +# $Id: local.properties 72339 2008-04-17 11:38:28Z adrian(a)jboss.org $ + +### General compiler configuration ### + +# Use the jikes compiler +#build.compiler=jikes + +# Use the eclipse compiler to allow for hot code swapping +# http://www.jboss.org/index.html?module=bb&op=viewtopic&t=65783 +# +# Make sure you have these jars in tools/lib +# +# org.eclipse.jdt.core_3.1.0.jar +# jdtCompilerAdapter.jar (is contained in org.eclipse.jdt.core_3.1.0.jar) +# +#build.compiler=org.eclipse.jdt.core.JDTCompilerAdapter + +javac.optimize=false +javac.debug=true +javac.depend=false +javac.verbose=false +javac.deprecation=false +javac.include.ant.runtime=true +javac.include.java.runtime=false +javac.fail.onerror=true + +junit.showoutput=true + +rmic.verify=true +rmic.iiop=false +rmic.iiopopts= +rmic.idl= +rmic.idlops= +rmic.debug=true + +# Location of the httpd binary and the httpd serverroot +#location.apache.httpd=/usr/sbin +#location.apache.serverroot=${user.home}/httpd +#location.apache.config=conf/mod-cluster-httpd.conf + +# Location of JBoss +jboss.dist=${env.JBOSS_HOME} + +# +# Both node0 and node1 properties are needed to run clustering tests. +# e.g., tests-clustering. Note that you will need to have two separate ips +# (even at the same machine). Actually what we needed are just node0 and node1 +# ips and the rest are optional. +# +#node0=${env.MYTESTIP_1} +#node0.http.url=http://192.168.1.103:8080 +#node0.jndiurl=jnp://192.168.1.103:1099 +#node0.hajndi.url=jnp://192.168.1.103:1100 + +#node1=${env.MYTESTIP_2} +#node1.http.url=http://192.168.1.113:8080 +#node1.jndiurl=jnp://192.168.1.113:1099 +#node1.hajndi.url=jnp://192.168.1.113:1100 + +# Set this to partition your testsuite runs +# from others on the network. +#udpGroup=${env.MY_UDP_GROUP} + +# In tests involving multicast, multicast packets by default have a TTL +# of 0. Uncomment to set this to 1 if you find 0 prevents proper multicast +# communication on your machine +#jbosstest.udp.ip_ttl=1 + +# Some DTM tests (e.g., dtm-tests) bring four JBoss instances up in order +# to test transactions distributed across multiple servers. Those tests +# need all four properties node0, node1, node2, and node3. Note that you +# will need to have four separate ips (even at the same machine). +node2=${env.MYTESTIP_3} +node3=${env.MYTESTIP_4} + +#The following properties will reduce verbosity of Apache Commons HttpClient +#org.apache.commons.logging.Log=org.apache.commons.logging.impl.SimpleLog +#org.apache.commons.logging.simplelog.showdatetime=true +#org.apache.commons.logging.simplelog.log.org.apache.commons.httpclient=debug +#org.apache.commons.logging.simplelog.log.httpclient.wire.header=error Modified: trunk/mod_cluster/pom.xml =================================================================== --- trunk/mod_cluster/pom.xml 2008-09-18 16:25:08 UTC (rev 1867) +++ trunk/mod_cluster/pom.xml 2008-09-18 22:55:29 UTC (rev 1868) @@ -9,7 +9,7 @@ <modelVersion>4.0.0</modelVersion> <groupId>org.jboss.native</groupId> - <artifactId>mod_cluster</artifactId> + <artifactId>mod-cluster</artifactId> <version>1.0.0-SNAPSHOT</version> <name></name> <description></description> @@ -38,6 +38,11 @@ <includes> <include>**/*TestCase.java</include> </includes> + <!-- Integration tests are in the "test" package; don't + run those during the normal surefire run --> + <excludes> + <exclude>**/test/**/*.java</exclude> + </excludes> </configuration> </plugin> <plugin> @@ -46,7 +51,88 @@ <tagBase>https://svn.jboss.org/repos/jbossnative/tags/mod_cluster</t... </configuration> </plugin> + + <!-- Dependency Plugin Configuration --> + <plugin> + <groupId>org.apache.maven.plugins</groupId> + <artifactId>maven-dependency-plugin</artifactId> + <executions> + + <!-- Unpack requisite build scripts --> + <execution> + <id>unpack-build-scripts</id> + <phase>process-resources</phase> + <goals> + <goal>unpack</goal> + </goals> + <configuration> + <artifactItems> + <artifactItem> + <groupId>org.jboss.test</groupId> + <artifactId>jboss-test</artifactId> + </artifactItem> + </artifactItems> + <outputDirectory>${project.build.directory}/dependencies/unpacked/jboss-test</outputDirectory> + <overWriteIfNewer>true</overWriteIfNewer> + </configuration> + </execution> + + <!-- Copy jboss-test JAR --> + <execution> + <id>copy-jboss-test</id> + <phase>process-resources</phase> + <goals> + <goal>copy</goal> + </goals> + <configuration> + <artifactItems> + <artifactItem> + <groupId>org.jboss.test</groupId> + <artifactId>jboss-test</artifactId> + </artifactItem> + <artifactItem> + <groupId>org.jboss.jbossas</groupId> + <artifactId>jboss-server-manager</artifactId> + </artifactItem> + </artifactItems> + <outputDirectory>${project.build.directory}/dependencies/lib</outputDirectory> + <overWriteIfNewer>true</overWriteIfNewer> + <stripVersion>true</stripVersion> + </configuration> + </execution> + + </executions> + </plugin> + + <!-- JAR the Tests --> + <!-- TODO: Instead of passing of the build directory, this jar is passed to junit. Why? --> + <!-- BES: I copied this from ejb3/testsuite/pom.xml but am commenting it + out until I see a requirement for it + <plugin> + <groupId>org.apache.maven.plugins</groupId> + <artifactId>maven-jar-plugin</artifactId> + <executions> + <execution> + <goals> + <goal>test-jar</goal> + </goals> + </execution> + </executions> + </plugin> + --> + </plugins> + + <pluginManagement> + <plugins> + <plugin> + <groupId>org.apache.maven.plugins</groupId> + <artifactId>maven-antrun-plugin</artifactId> + <version>1.2</version> + </plugin> + </plugins> + </pluginManagement> + </build> <dependencies> @@ -93,6 +179,72 @@ <version>2.5</version> <scope>test</scope> </dependency> + <dependency> + <groupId>org.jboss.test</groupId> + <artifactId>jboss-test</artifactId> + <version>1.1.0.GA</version> + <scope>test</scope> + </dependency> + <dependency> + <groupId>commons-codec</groupId> + <artifactId>commons-codec</artifactId> + <version>1.3</version> + <scope>test</scope> + </dependency> + <dependency> + <groupId>commons-httpclient</groupId> + <artifactId>commons-httpclient</artifactId> + <version>3.1</version> + <scope>test</scope> + </dependency> + <dependency> + <groupId>org.jboss.jbossas</groupId> + <artifactId>jboss-server-manager</artifactId> + <version>0.1.0.GA</version> + </dependency> + </dependencies> -</project> \ No newline at end of file + <profiles> + <profile> + <id>integration-test</id> + <activation> + <activeByDefault>false</activeByDefault> + <property> + <name>maven.run.integration.tests</name> + <value>true</value> + </property> + </activation> + + <build> + <plugins> + <!-- The individual integration tests are built and run using Ant --> + <plugin> + <groupId>org.apache.maven.plugins</groupId> + <artifactId>maven-antrun-plugin</artifactId> + <executions> + <execution> + <id>build-tests</id> + <goals> + <goal>run</goal> + </goals> + <phase>integration-test</phase> + <configuration> + <tasks> + + <!-- Execute the Test Build --> + <ant antfile="build-test.xml" target="main" /> + + <!-- Execute the integration tests that require httpd --> + <ant antfile="build-test.xml" target="tests-apache-integration" /> + + </tasks> + </configuration> + </execution> + </executions> + </plugin> + </plugins> + </build> + </profile> + </profiles> +</project> Added: trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-httpd/conf/mod-cluster-httpd.conf =================================================================== --- trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-httpd/conf/mod-cluster-httpd.conf (rev 0) +++ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-httpd/conf/mod-cluster-httpd.conf 2008-09-18 22:55:29 UTC (rev 1868) @@ -0,0 +1,990 @@ +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information. +# In particular, see +# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> +# for a discussion of each configuration directive. +# +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "/etc/httpd" will be interpreted by the +# server as "/etc/httpd/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# Don't give away too much information about all the subcomponents +# we are running. Comment out this line if you don't mind remote sites +# finding out what major optional modules you are running +ServerTokens OS + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation +# (available at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +#ServerRoot "/etc/httpd" + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +PidFile run/httpd.pid + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 120 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive Off + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# ServerLimit: maximum value for MaxClients for the lifetime of the server +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves +<IfModule prefork.c> +StartServers 8 +MinSpareServers 5 +MaxSpareServers 20 +ServerLimit 256 +MaxClients 256 +MaxRequestsPerChild 4000 +</IfModule> + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves +<IfModule worker.c> +StartServers 2 +MaxClients 150 +MinSpareThreads 25 +MaxSpareThreads 75 +ThreadsPerChild 25 +MaxRequestsPerChild 0 +</IfModule> + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, in addition to the default. See also the <VirtualHost> +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses (0.0.0.0) +# +#Listen 12.34.56.78:80 +Listen 127.0.0.1:8000 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule auth_basic_module modules/mod_auth_basic.so +LoadModule auth_digest_module modules/mod_auth_digest.so +LoadModule authn_file_module modules/mod_authn_file.so +LoadModule authn_alias_module modules/mod_authn_alias.so +LoadModule authn_anon_module modules/mod_authn_anon.so +LoadModule authn_dbm_module modules/mod_authn_dbm.so +LoadModule authn_default_module modules/mod_authn_default.so +LoadModule authz_host_module modules/mod_authz_host.so +LoadModule authz_user_module modules/mod_authz_user.so +LoadModule authz_owner_module modules/mod_authz_owner.so +LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +LoadModule authz_dbm_module modules/mod_authz_dbm.so +LoadModule authz_default_module modules/mod_authz_default.so +LoadModule ldap_module modules/mod_ldap.so +LoadModule authnz_ldap_module modules/mod_authnz_ldap.so +LoadModule include_module modules/mod_include.so +LoadModule log_config_module modules/mod_log_config.so +LoadModule logio_module modules/mod_logio.so +LoadModule env_module modules/mod_env.so +LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule mime_magic_module modules/mod_mime_magic.so +LoadModule expires_module modules/mod_expires.so +LoadModule deflate_module modules/mod_deflate.so +LoadModule headers_module modules/mod_headers.so +LoadModule usertrack_module modules/mod_usertrack.so +LoadModule setenvif_module modules/mod_setenvif.so +LoadModule mime_module modules/mod_mime.so +LoadModule dav_module modules/mod_dav.so +LoadModule status_module modules/mod_status.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule info_module modules/mod_info.so +LoadModule dav_fs_module modules/mod_dav_fs.so +LoadModule vhost_alias_module modules/mod_vhost_alias.so +LoadModule negotiation_module modules/mod_negotiation.so +LoadModule dir_module modules/mod_dir.so +LoadModule actions_module modules/mod_actions.so +LoadModule speling_module modules/mod_speling.so +LoadModule userdir_module modules/mod_userdir.so +LoadModule alias_module modules/mod_alias.so +LoadModule rewrite_module modules/mod_rewrite.so +LoadModule proxy_module modules/mod_proxy.so +LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +LoadModule proxy_http_module modules/mod_proxy_http.so +LoadModule proxy_connect_module modules/mod_proxy_connect.so +LoadModule cache_module modules/mod_cache.so +LoadModule suexec_module modules/mod_suexec.so +LoadModule disk_cache_module modules/mod_disk_cache.so +LoadModule file_cache_module modules/mod_file_cache.so +LoadModule mem_cache_module modules/mod_mem_cache.so +LoadModule cgi_module modules/mod_cgi.so + +# +# The following modules are not loaded by default: +# +#LoadModule cern_meta_module modules/mod_cern_meta.so +#LoadModule asis_module modules/mod_asis.so + +# +# Load config files from the config directory "/etc/httpd/conf.d". +# +#Include conf.d/*.conf + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# . On SCO (ODT 3) use "User nouser" and "Group nogroup". +# . On HPUX you may not be able to use shared memory as nobody, and the +# suggested workaround is to create a user www and use that user. +# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) +# when the value of (unsigned)Group is above 60000; +# don't use Group #-1 on these systems! +# +#User apache +#Group apache + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# <VirtualHost> definition. These values also provide defaults for +# any <VirtualHost> containers you may define later in the file. +# +# All of these directives may appear inside <VirtualHost> containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin(a)your-domain.com +# +ServerAdmin root@localhost + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If this is not set to valid DNS name for your host, server-generated +# redirections will not work. See also the UseCanonicalName directive. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address anyway, and this will make +# redirections work in a sensible way. +# +ServerName 127.0.0.1:8000 + +# +# UseCanonicalName: Determines how Apache constructs self-referencing +# URLs and the SERVER_NAME and SERVER_PORT variables. +# When set "Off", Apache will use the Hostname and Port supplied +# by the client. When set "On", Apache will use the value of the +# ServerName directive. +# +UseCanonicalName Off + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/var/www/html" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# +<Directory /> + Options FollowSymLinks + AllowOverride None +</Directory> + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# +<Directory "/var/www/html"> + +# +# Possible values for the Options directive are "None", "All", +# or any combination of: +# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# +# The Options directive is both complicated and important. Please see +# http://httpd.apache.org/docs/2.2/mod/core.html#options +# for more information. +# + Options Indexes FollowSymLinks + +# +# AllowOverride controls what directives may be placed in .htaccess files. +# It can be "All", "None", or any combination of the keywords: +# Options FileInfo AuthConfig Limit +# + AllowOverride None + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all + +</Directory> + +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. +# +# The path to the end user account 'public_html' directory must be +# accessible to the webserver userid. This usually means that ~userid +# must have permissions of 711, ~userid/public_html must have permissions +# of 755, and documents contained therein must be world-readable. +# Otherwise, the client will only receive a "403 Forbidden" message. +# +# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden +# +<IfModule mod_userdir.c> + # + # UserDir is disabled by default since it can confirm the presence + # of a username on the system (depending on home directory + # permissions). + # + UserDir disable + + # + # To enable requests to /~user/ to serve the user's public_html + # directory, remove the "UserDir disable" line above, and uncomment + # the following line instead: + # + #UserDir public_html + +</IfModule> + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# +#<Directory /home/*/public_html> +# AllowOverride FileInfo AuthConfig Limit +# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec +# <Limit GET POST OPTIONS> +# Order allow,deny +# Allow from all +# </Limit> +# <LimitExcept GET POST OPTIONS> +# Order deny,allow +# Deny from all +# </LimitExcept> +#</Directory> + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +# The index.html.var file (a type-map) is used to deliver content- +# negotiated documents. The MultiViews Option can be used for the +# same purpose, but it is much slower. +# +DirectoryIndex index.html index.html.var + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# +<Files ~ "^\.ht"> + Order allow,deny + Deny from all +</Files> + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +TypesConfig /etc/mime.types + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# +<IfModule mod_mime_magic.c> +# MIMEMagicFile /usr/share/magic.mime + MIMEMagicFile conf/magic +</IfModule> + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# EnableMMAP: Control whether memory-mapping is used to deliver +# files (assuming that the underlying OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. On some systems, turning it off (regardless of +# filesystem) can improve performance; for details, please see +# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap +# +#EnableMMAP off + +# +# EnableSendfile: Control whether the sendfile kernel support is +# used to deliver files (assuming that the OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. Please see +# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile +# +#EnableSendfile off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a <VirtualHost> +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a <VirtualHost> +# container, that host's errors will be logged there and not here. +# +ErrorLog logs/error_log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this +# requires the mod_logio module to be loaded. +#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a <VirtualHost> +# container, they will be logged here. Contrariwise, if you *do* +# define per-<VirtualHost> access logfiles, transactions will be +# logged therein and *not* in this file. +# +#CustomLog logs/access_log common + +# +# If you would like to have separate agent and referer logfiles, uncomment +# the following directives. +# +#CustomLog logs/referer_log referer +#CustomLog logs/agent_log agent + +# +# For a single logfile with access, agent, and referer information +# (Combined Logfile Format), use the following directive: +# +CustomLog logs/access_log combined + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (internal error documents, FTP directory +# listings, mod_status and mod_info output etc., but not CGI generated +# documents or custom error documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +# Note that if you include a trailing / on fakename then the server will +# require it to be present in the URL. So "/icons" isn't aliased in this +# example, only "/icons/". If the fakename is slash-terminated, then the +# realname must also be slash terminated, and if the fakename omits the +# trailing slash, the realname must also omit it. +# +# We include the /icons/ alias for FancyIndexed directory listings. If you +# do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "/var/www/icons/" + +<Directory "/var/www/icons"> + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all +</Directory> + +# +# WebDAV module configuration section. +# +<IfModule mod_dav_fs.c> + # Location of the WebDAV lock database. + DAVLockDB /var/lib/dav/lockdb +</IfModule> + +# +# ScriptAlias: This controls which directories contain server scripts. +# ScriptAliases are essentially the same as Aliases, except that +# documents in the realname directory are treated as applications and +# run by the server when requested rather than as documents sent to the client. +# The same rules about trailing "/" apply to ScriptAlias directives as to +# Alias. +# +ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" + +# +# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# +<Directory "/var/www/cgi-bin"> + AllowOverride None + Options None + Order allow,deny + Allow from all +</Directory> + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Example: +# Redirect permanent /foo http://www.example.com/bar + +# +# Directives controlling the display of server-generated directory listings. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + +# +# DefaultLanguage and AddLanguage allows you to specify the language of +# a document. You can then use content negotiation to give a browser a +# file in a language the user can understand. +# +# Specify a default language. This means that all data +# going out without a specific language tag (see below) will +# be marked with this one. You probably do NOT want to set +# this unless you are sure it is correct for all cases. +# +# * It is generally better to not mark a page as +# * being a certain language than marking it with the wrong +# * language! +# +# DefaultLanguage nl +# +# Note 1: The suffix does not have to be the same as the language +# keyword --- those with documents in Polish (whose net-standard +# language code is pl) may wish to use "AddLanguage pl .po" to +# avoid the ambiguity with the common suffix for perl scripts. +# +# Note 2: The example entries below illustrate that in some cases +# the two character 'Language' abbreviation is not identical to +# the two character 'Country' code for its country, +# E.g. 'Danmark/dk' versus 'Danish/da'. +# +# Note 3: In the case of 'ltz' we violate the RFC by using a three char +# specifier. There is 'work in progress' to fix this and get +# the reference data for rfc1766 cleaned up. +# +# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) +# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) +# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) +# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) +# Norwegian (no) - Polish (pl) - Portugese (pt) +# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) +# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW) +# +AddLanguage ca .ca +AddLanguage cs .cz .cs +AddLanguage da .dk +AddLanguage de .de +AddLanguage el .el +AddLanguage en .en +AddLanguage eo .eo +AddLanguage es .es +AddLanguage et .et +AddLanguage fr .fr +AddLanguage he .he +AddLanguage hr .hr +AddLanguage it .it +AddLanguage ja .ja +AddLanguage ko .ko +AddLanguage ltz .ltz +AddLanguage nl .nl +AddLanguage nn .nn +AddLanguage no .no +AddLanguage pl .po +AddLanguage pt .pt +AddLanguage pt-BR .pt-br +AddLanguage ru .ru +AddLanguage sv .sv +AddLanguage zh-CN .zh-cn +AddLanguage zh-TW .zh-tw + +# +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# +# Just list the languages in decreasing order of preference. We have +# more or less alphabetized them here. You probably want to change this. +# +LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW + +# +# ForceLanguagePriority allows you to serve a result page rather than +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) +# [in case no accepted languages matched the available variants] +# +ForceLanguagePriority Prefer Fallback + +# +# Specify a default charset for all content served; this enables +# interpretation of all content as UTF-8 by default. To use the +# default browser choice (ISO-8859-1), or to allow the META tags +# in HTML content to override this choice, comment out this +# directive: +# +AddDefaultCharset UTF-8 + +# +# AddType allows you to add to or override the MIME configuration +# file mime.types for specific file types. +# +#AddType application/x-tar .tgz + +# +# AddEncoding allows you to have certain browsers uncompress +# information on the fly. Note: Not all browsers support this. +# Despite the name similarity, the following Add* directives have nothing +# to do with the FancyIndexing customization directives above. +# +#AddEncoding x-compress .Z +#AddEncoding x-gzip .gz .tgz + +# If the AddEncoding directives above are commented-out, then you +# probably should define those extensions to indicate media types: +# +AddType application/x-compress .Z +AddType application/x-gzip .gz .tgz + +# +# AddHandler allows you to map certain file extensions to "handlers": +# actions unrelated to filetype. These can be either built into the server +# or added with the Action directive (see below) +# +# To use CGI scripts outside of ScriptAliased directories: +# (You will also need to add "ExecCGI" to the "Options" directive.) +# +#AddHandler cgi-script .cgi + +# +# For files that include their own HTTP headers: +# +#AddHandler send-as-is asis + +# +# For type maps (negotiated resources): +# (This is enabled by default to allow the Apache "It Worked" page +# to be distributed in multiple languages.) +# +AddHandler type-map var + +# +# Filters allow you to process content before it is sent to the client. +# +# To parse .shtml files for server-side includes (SSI): +# (You will also need to add "Includes" to the "Options" directive.) +# +AddType text/html .shtml +AddOutputFilter INCLUDES .shtml + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# Putting this all together, we can internationalize error responses. +# +# We use Alias to redirect any /error/HTTP_<error>.html.var response to +# our collection of by-error message multi-language collections. We use +# includes to substitute the appropriate text. +# +# You can modify the messages' appearance without changing any of the +# default HTTP_<error>.html.var files by adding the line: +# +# Alias /error/include/ "/your/include/path/" +# +# which allows you to create your own set of files by starting with the +# /var/www/error/include/ files and +# copying them to /your/include/path/, even on a per-VirtualHost basis. +# + +Alias /error/ "/var/www/error/" + +<IfModule mod_negotiation.c> +<IfModule mod_include.c> + <Directory "/var/www/error"> + AllowOverride None + Options IncludesNoExec + AddOutputFilter Includes html + AddHandler type-map var + Order allow,deny + Allow from all + LanguagePriority en es de fr + ForceLanguagePriority Prefer Fallback + </Directory> + +# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var +# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var +# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var +# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var +# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var +# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var +# ErrorDocument 410 /error/HTTP_GONE.html.var +# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var +# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var +# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var +# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var +# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var +# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var +# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var +# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var +# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var + +</IfModule> +</IfModule> + +# +# The following directives modify normal HTTP response behavior to +# handle known problems with browser implementations. +# +BrowserMatch "Mozilla/2" nokeepalive +BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 +BrowserMatch "RealPlayer 4\.0" force-response-1.0 +BrowserMatch "Java/1\.0" force-response-1.0 +BrowserMatch "JDK/1\.0" force-response-1.0 + +# +# The following directive disables redirects on non-GET requests for +# a directory that does not include the trailing slash. This fixes a +# problem with Microsoft WebFolders which does not appropriately handle +# redirects for folders with DAV methods. +# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. +# +BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully +BrowserMatch "MS FrontPage" redirect-carefully +BrowserMatch "^WebDrive" redirect-carefully +BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully +BrowserMatch "^gnome-vfs/1.0" redirect-carefully +BrowserMatch "^XML Spy" redirect-carefully +BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully + +# +# Allow server status reports generated by mod_status, +# with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. +# +#<Location /server-status> +# SetHandler server-status +# Order deny,allow +# Deny from all +# Allow from .example.com +#</Location> + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# +#<Location /server-info> +# SetHandler server-info +# Order deny,allow +# Deny from all +# Allow from .example.com +#</Location> + +# +# Proxy Server directives. Uncomment the following lines to +# enable the proxy server: +# +#<IfModule mod_proxy.c> +#ProxyRequests On +# +#<Proxy *> +# Order deny,allow +# Deny from all +# Allow from .example.com +#</Proxy> + +# +# Enable/disable the handling of HTTP/1.1 "Via:" headers. +# ("Full" adds the server version; "Block" removes all outgoing Via: headers) +# Set to one of: Off | On | Full | Block +# +#ProxyVia On + +# +# To enable a cache of proxied content, uncomment the following lines. +# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details. +# +#<IfModule mod_disk_cache.c> +# CacheEnable disk / +# CacheRoot "/var/cache/mod_proxy" +#</IfModule> +# + +#</IfModule> +# End of proxy directives. + +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. Most configurations +# use only name-based virtual hosts so the server doesn't need to worry about +# IP addresses. This is indicated by the asterisks in the directives below. +# +# Please see the documentation at +# <URL:http://httpd.apache.org/docs/2.2/vhosts/> +# for further details before you try to setup virtual hosts. +# +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# Use name-based virtual hosting. +# +#NameVirtualHost *:80 +# +# NOTE: NameVirtualHost cannot be used without a port specifier +# (e.g. :80) if mod_ssl is being used, due to the nature of the +# SSL protocol. +# + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# The first VirtualHost section is used for requests without a known +# server name. +# +#<VirtualHost *:80> +# ServerAdmin webmaster(a)dummy-host.example.com +# DocumentRoot /www/docs/dummy-host.example.com +# ServerName dummy-host.example.com +# ErrorLog logs/dummy-host.example.com-error_log +# CustomLog logs/dummy-host.example.com-access_log common +#</VirtualHost> Added: trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/META-INF/jboss-beans.xml =================================================================== --- trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/META-INF/jboss-beans.xml (rev 0) +++ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/META-INF/jboss-beans.xml 2008-09-18 22:55:29 UTC (rev 1868) @@ -0,0 +1,32 @@ +<?xml version="1.0" encoding="UTF-8"?> +<deployment xmlns="urn:jboss:bean-deployer:2.0"> + + <bean name="WebServer" + class="org.jboss.web.tomcat.service.deployers.TomcatService"> + + <annotation>@org.jboss.aop.microcontainer.aspects.jmx.JMX(name="jboss.web:service=WebServer", exposedInterface=org.jboss.web.tomcat.service.deployers.TomcatServiceMBean.class,registerDirectly=true)</annotation> + + <!-- Only needed if the org.jboss.web.tomcat.service.jca.CachedConnectionValve + is enabled in the tomcat server.xml file. + --> + <depends>jboss.jca:service=CachedConnectionManager</depends> + + <!-- Transaction manager for unfinished transaction checking in the CachedConnectionValve --> + <depends>jboss:service=TransactionManager</depends> + + <!-- Only needed if the org.jboss.web.tomcat.service.deployers.MicrocontainerIntegrationLifecycleListener + is enabled in the tomcat server.xml file. + --> + <depends>ModClusterLifecycleListener</depends> + + <!-- Inject the TomcatDeployer --> + <property name="tomcatDeployer"><inject bean="WarDeployer"/></property> + + <!-- + Do not configure other JMX attributes via this file. + Use the WarDeployer bean in deployers/jboss-web.deployer/war-deployers-beans.xml + --> + + </bean> + +</deployment> Added: trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/server.xml =================================================================== --- trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/server.xml (rev 0) +++ trunk/mod_cluster/src/test/resources/test-configs/mod-cluster-jbossas/deploy/jbossweb.sar/server.xml 2008-09-18 22:55:29 UTC (rev 1868) @@ -0,0 +1,165 @@ +<Server> + + <!-- Optional listener which ensures correct init and shutdown of APR, + and provides information if it is not installed --> + <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> + <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> + <Listener className="org.apache.catalina.core.JasperListener" /> + <!--Listener className="org.jboss.modcluster.ClusterListener" + advertise="true"/--> + <Listener className="org.jboss.web.tomcat.service.deployers.MicrocontainerIntegrationLifecycleListener" + delegateBeanName="ModClusterLifecycleListener" /> + + <Service name="jboss.web"> + + <!-- A HTTP/1.1 Connector on port 8080 --> + <Connector protocol="HTTP/1.1" port="8080" address="${jboss.bind.address}" + connectionTimeout="20000" redirectPort="8443" /> + + <!-- Add this option to the connector to avoid problems with + .NET clients that don't implement HTTP/1.1 correctly + restrictedUserAgents="^.*MS Web Services Client Protocol 1.1.4322.*$" + --> + + <!-- A AJP 1.3 Connector on port 8009 --> + <Connector protocol="AJP/1.3" port="8009" address="${jboss.bind.address}" + redirectPort="8443" /> + + <!-- SSL/TLS Connector configuration using the admin devl guide keystore + <Connector protocol="HTTP/1.1" SSLEnabled="true" + port="8443" address="${jboss.bind.address}" + scheme="https" secure="true" clientAuth="false" + keystoreFile="${jboss.server.home.dir}/conf/chap8.keystore" + keystorePass="rmi+ssl" sslProtocol = "TLS" /> + --> + + <Engine name="jboss.web" defaultHost="localhost" jvmRoute="localhost"> + + <!-- The JAAS based authentication and authorization realm implementation + that is compatible with the jboss 3.2.x realm implementation. + - certificatePrincipal : the class name of the + org.jboss.security.auth.certs.CertificatePrincipal impl + used for mapping X509[] cert chains to a Princpal. + - allRolesMode : how to handle an auth-constraint with a role-name=*, + one of strict, authOnly, strictAuthOnly + + strict = Use the strict servlet spec interpretation which requires + that the user have one of the web-app/security-role/role-name + + authOnly = Allow any authenticated user + + strictAuthOnly = Allow any authenticated user only if there are no + web-app/security-roles + --> + <Realm className="org.jboss.web.tomcat.security.JBossWebRealm" + certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" + allRolesMode="authOnly" + /> + <!-- A subclass of JBossSecurityMgrRealm that uses the authentication + behavior of JBossSecurityMgrRealm, but overrides the authorization + checks to use JACC permissions with the current java.security.Policy + to determine authorized access. + - allRolesMode : how to handle an auth-constraint with a role-name=*, + one of strict, authOnly, strictAuthOnly + + strict = Use the strict servlet spec interpretation which requires + that the user have one of the web-app/security-role/role-name + + authOnly = Allow any authenticated user + + strictAuthOnly = Allow any authenticated user only if there are no + web-app/security-roles + <Realm className="org.jboss.web.tomcat.security.JaccAuthorizationRealm" + certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" + allRolesMode="authOnly" + /> + --> + + <Host name="localhost"> + + <!-- Uncomment to enable request dumper. This Valve "logs interesting + contents from the specified Request (before processing) and the + corresponding Response (after processing). It is especially useful + in debugging problems related to headers and cookies." + --> + <!-- + <Valve className="org.apache.catalina.valves.RequestDumperValve" /> + --> + + <!-- Access logger --> + <!-- + <Valve className="org.apache.catalina.valves.AccessLogValve" + prefix="localhost_access_log." suffix=".log" + pattern="common" directory="${jboss.server.log.dir}" + resolveHosts="false" /> + --> + + <!-- Uncomment to enable single sign-on across web apps + deployed to this host. Does not provide SSO across a cluster. + + If this valve is used, do not use the JBoss ClusteredSingleSignOn + valve shown below. + + A new configuration attribute is available beginning with + release 4.0.4: + + cookieDomain configures the domain to which the SSO cookie + will be scoped (i.e. the set of hosts to + which the cookie will be presented). By default + the cookie is scoped to "/", meaning the host + that presented it. Set cookieDomain to a + wider domain (e.g. "xyz.com") to allow an SSO + to span more than one hostname. + --> + <!-- + <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> + --> + + <!-- Uncomment to enable single sign-on across web apps + deployed to this host AND to all other hosts in the cluster. + + If this valve is used, do not use the standard Tomcat SingleSignOn + valve shown above. + + Valve uses a JBossCache instance to support SSO credential + caching and replication across the cluster. The JBossCache + instance must be configured separately. See the + "jboss-web-clusteredsso-beans.xml" file in the + server/all/deploy directory for cache configuration details. + + Besides the attributes supported by the standard Tomcat + SingleSignOn valve (see the Tomcat docs), this version also + supports the following attributes: + + cookieDomain see above + + treeCacheName JMX ObjectName of the JBossCache MBean used to + support credential caching and replication across + the cluster. If not set, the default value is + "jboss.cache:service=ClusteredSSOCache" + + maxEmptyLife The maximum number of seconds an SSO with no + active sessions will be usable by a request + + processExpiresInterval The minimum number of seconds between + efforts by the valve to find and invalidate + SSO's that have exceeded their 'maxEmptyLife'. + Does not imply effort will be spent on such + cleanup every 'processExpiresInterval'. + --> + <!-- + <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> + --> + + <!-- Check for unclosed connections and transaction terminated checks + in servlets/jsps. + + Important: The dependency on the CachedConnectionManager + in META-INF/jboss-service.xml must be uncommented, too + --> + + <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" + cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" + transactionManagerObjectName="jboss:service=TransactionManager" /> + + </Host> + + </Engine> + + </Service> + +</Server> Added: trunk/mod_cluster/test-jars.xml =================================================================== --- trunk/mod_cluster/test-jars.xml (rev 0) +++ trunk/mod_cluster/test-jars.xml 2008-09-18 22:55:29 UTC (rev 1868) @@ -0,0 +1,15 @@ +<!-- Ant project fragment for the unit tests deployment jars +$Id: test-jars.xml 77754 2008-09-01 14:25:24Z adrian(a)jboss.org $ +--> +<project name="test-jars"> + + <!-- + | Build all jar files. + | Add a separate target for each test deployment/set of deployments + | and then add that target to depends="..." + --> + <target name="jars" description="Builds all jar files." + depends="init, compile-resources"/> + +</project> +