[jbossnative-commits] JBoss Native SVN: r1352 - in trunk/build: install and 1 other directory.

Author: mladen.turk(a)jboss.com Date: 2008-02-05 02:33:29 -0500 (Tue, 05 Feb 2008) New Revision: 1352 Added: trunk/build/install/ trunk/build/install/README trunk/build/install/makeself-header.sh trunk/build/install/makeself.sh Log: Add install utils (original) Added: trunk/build/install/README =================================================================== --- trunk/build/install/README (rev 0) +++ trunk/build/install/README 2008-02-05 07:33:29 UTC (rev 1352) @@ -0,0 +1,307 @@ +The following was generated from http://www.megastep.org/makeself/ +----------------------- + + + #[1]Mobile/PDA + + makeself - Make self-extractable archives on Unix + + [2]makeself.sh is a small shell script that generates a self-extractable + tar.gz archive from a directory. The resulting file appears as a shell + script (many of those have a .run suffix), and can be launched as is. The + archive will then uncompress itself to a temporary directory and an optional + arbitrary command will be executed (for example an installation script). + This is pretty similar to archives generated with WinZip Self-Extractor in + the Windows world. Makeself archives also include checksums for integrity + self-validation (CRC and/or MD5 checksums). + + The makeself.sh script itself is used only to create the archives from a + directory of files. The resultant archive is actually a compressed (using + gzip, bzip2, or compress) TAR archive, with a small shell script stub at the + beginning. This small stub performs all the steps of extracting the files, + running the embedded command, and removing the temporary files when it's all + over. All what the user has to do to install the software contained in such + an archive is to "run" the archive, i.e sh nice-software.run. I recommend + using the "run" (which was introduced by some Makeself archives released by + Loki Software) or "sh" suffix for such archives not to confuse the users, + since they know it's actually shell scripts (with quite a lot of binary data + attached to it though!). + + I am trying to keep the code of this script as portable as possible, i.e + it's not relying on any bash-specific features and only calls commands that + are installed on any functioning UNIX-compatible system. This script as well + as the archives it generates should run on any Unix flavor, with any + compatible Bourne shell, provided of course that the compression programs + are available. + + As of version 2.1, Makeself has been rewritten and tested on the following + platforms : + * Linux (all distributions) + * Sun Solaris (8 tested) + * HP-UX (tested on 11.0 and 11i on HPPA RISC) + * SCO OpenUnix and OpenServer + * IBM AIX 5.1L + * MacOS X (Darwin) + * SGI IRIX 6.5 + * FreeBSD + * UnicOS / Cray + + If you successfully run Makeself and/or archives created with it on another + system, then [3]let me know! + + Examples of publicly available archives made using makeself are : + * Game patches and installers for [4]Id Software games like Quake 3 for + Linux or Return To Castle Wolfenstien ; + * All game patches released by [5]Loki Software for the Linux version of + popular games ; + * The [6]nVidia drivers for Linux + * The installer for the Linux version of [7]Google Earth + * The [8]Makeself distribution itself ;-) + * and countless others... + + Important note for Apache users: By default, most Web servers will think + that Makeself archives are regular text files and thus they may show up as + text in a Web browser. The correct way to prevent this is to add a MIME type + for this file format, like so (in httpd.conf) : + AddType application/x-makeself .run + + Important note for recent GNU/Linux distributions: Archives created with + Makeself prior to v2.1.2 were using an old syntax for the head and tail Unix + commands that is being progressively obsoleted in their GNU forms. Therefore + you may have problems uncompressing some of these archives. A workaround for + this is to set the environment variable $_POSIX2_VERSION to enable the old + syntax, i.e. : + export _POSIX2_VERSION=199209 + +Usage + + The syntax of makeself is the following: + + makeself.sh [args] archive_dir file_name label startup_script [script_args] + * args are optional options for Makeself. The available ones are : + + --version : Prints the version number on stdout, then exits + immediately + + --gzip : Use gzip for compression (is the default on platforms on + which gzip is commonly available, like Linux) + + --bzip2 : Use bzip2 instead of gzip for better compression. The + bzip2 command must be available in the command path. I recommend + that you set the prefix to something like '.bz2.run' for the + archive, so that potential users know that they'll need bzip2 to + extract it. + + --compress : Use the UNIX "compress" command to compress the data. + This should be the default on all platforms that don't have gzip + available. + + --nocomp : Do not use any compression for the archive, which will + then be an uncompressed TAR. + + --notemp : The generated archive will not extract the files to a + temporary directory, but in a new directory created in the current + directory. This is better to distribute software packages that may + extract and compile by themselves (i.e. launch the compilation + through the embedded script). + + --current : Files will be extracted to the current directory, + instead of in a subdirectory. This option implies --notemp above. + + --follow : Follow the symbolic links inside of the archive + directory, i.e. store the files that are being pointed to instead + of the links themselves. + + --append (new in 2.1.x): Append data to an existing archive, + instead of creating a new one. In this mode, the settings from the + original archive are reused (compression type, label, embedded + script), and thus don't need to be specified again on the command + line. + + --header : Makeself 2.0 uses a separate file to store the header + stub, called "makeself-header.sh". By default, it is assumed that + it is stored in the same location as makeself.sh. This option can + be used to specify its actual location if it is stored someplace + else. + + --copy : Upon extraction, the archive will first extract itself to + a temporary directory. The main application of this is to allow + self-contained installers stored in a Makeself archive on a CD, + when the installer program will later need to unmount the CD and + allow a new one to be inserted. This prevents "Filesystem busy" + errors for installers that span multiple CDs. + + --nox11 : Disable the automatic spawning of a new terminal in X11. + + --nowait : When executed from a new X11 terminal, disable the user + prompt at the end of the script execution. + + --nomd5 and --nocrc : Disable the creation of a MD5 / CRC checksum + for the archive. This speeds up the extraction process if integrity + checking is not necessary. + + --lsm file : Provide and LSM file to makeself, that will be + embedded in the generated archive. LSM files are describing a + software package in a way that is easily parseable. The LSM entry + can then be later retrieved using the '-lsm' argument to the + archive. An exemple of a LSM file is provided with Makeself. + * archive_dir is the name of the directory that contains the files to be + archived + * file_name is the name of the archive to be created + * label is an arbitrary text string describing the package. It will be + displayed while extracting the files. + * startup_script is the command to be executed from within the directory + of extracted files. Thus, if you wish to execute a program contain in + this directory, you must prefix your command with "./". For example, + ./program will be fine. The script_args are additionnal arguments for + this command. + + Here is an example, assuming the user has a package image stored in a + /home/joe/mysoft, and he wants to generate a self-extracting package named + mysoft.sh, which will launch the "setup" script initially stored in + /home/joe/mysoft : + + makeself.sh /home/joe/mysoft mysoft.sh "Joe's Nice Software Package" ./setup + Here is also how I created the [9]makeself.run archive which contains the + Makeself distribution : + + makeself.sh --notemp makeself makeself.run "Makeself by Stephane Peter" echo + "Makeself has extracted itself" + + Archives generated with Makeself 2.1 can be passed the following arguments: + + * --keep : Prevent the files to be extracted in a temporary directory that + will be removed after the embedded script's execution. The files will + then be extracted in the current working directory and will stay here + until you remove them. + * --verbose : Will prompt the user before executing the embedded command + * --target dir : Allows to extract the archive in an arbitrary place. + * --nox11 : Do not spawn a X11 terminal. + * --confirm : Prompt the user for confirmation before running the embedded + command. + * --info : Print out general information about the archive (does not + extract). + * --lsm : Print out the LSM entry, if it is present. + * --list : List the files in the archive. + * --check : Check the archive for integrity using the embedded checksums. + Does not extract the archive. + * --nochown : By default, a "chown -R" command is run on the target + directory after extraction, so that all files belong to the current + user. This is mostly needed if you are running as root, as tar will then + try to recreate the initial user ownerships. You may disable this + behavior with this flag. + * --tar : Run the tar command on the contents of the archive, using the + following arguments as parameter for the command. + * --noexec : Do not run the embedded script after extraction. + + Any subsequent arguments to the archive will be passed as additional + arguments to the embedded command. You should explicitly use the -- special + command-line construct before any such options to make sure that Makeself + will not try to interpret them. + +License + + Makeself is covered by the [10]GNU General Public License (GPL) version 2 + and above. Archives generated by Makeself don't have to be placed under this + license (although I encourage it ;-)), since the archive itself is merely + data for Makeself. + +Download + + Get the latest official distribution [11]here (version 2.1.5). + + The latest development version can be grabbed from the Loki Setup CVS + module, at [12]cvs.icculus.org. + +Version history + + * v1.0: Initial public release + * v1.1: The archive can be passed parameters that will be passed on to the + embedded script, thanks to John C. Quillan + * v1.2: Cosmetic updates, support for bzip2 compression and non-temporary + archives. Many ideas thanks to Francois Petitjean. + * v1.3: More patches from Bjarni R. Einarsson and Francois Petitjean: + Support for no compression (--nocomp), script is no longer mandatory, + automatic launch in an xterm, optional verbose output, and -target + archive option to indicate where to extract the files. + * v1.4: Many patches from Francois Petitjean: improved UNIX compatibility, + automatic integrity checking, support of LSM files to get info on the + package at run time.. + * v1.5.x: A lot of bugfixes, and many other patches, including automatic + verification through the usage of checksums. Version 1.5.5 was the + stable release for a long time, even though the Web page didn't get + updated ;-). Makeself was also officially made a part of the [13]Loki + Setup installer, and its source is being maintained as part of this + package. + * v2.0: Complete internal rewrite of Makeself. The command-line parsing + was vastly improved, the overall maintenance of the package was greatly + improved by separating the stub from makeself.sh. Also Makeself was + ported and tested to a variety of Unix platforms. + * v2.0.1: First public release of the new 2.0 branch. Prior versions are + officially obsoleted. This release introduced the '--copy' argument that + was introduced in response to a need for the [14]UT2K3 Linux installer. + * v2.1.0: Big change : Makeself can now support multiple embedded + tarballs, each stored separately with their own checksums. An existing + archive can be updated with the --append flag. Checksums are also better + managed, and the --nochown option for archives appeared. + * v2.1.1: Fixes related to the Unix compression (compress command). Some + Linux distributions made the insane choice to make it unavailable, even + though gzip is capable of uncompressing these files, plus some more + bugfixes in the extraction and checksum code. + * v2.1.2: Some bug fixes. Use head -n to avoid problems with POSIX + conformance. + * v2.1.3: Bug fixes with the command line when spawning terminals. Added + --tar, --noexec for archives. Added --nomd5 and --nocrc to avoid + creating checksums in archives. The embedded script is now run through + "eval". The --info output now includes the command used to create the + archive. A man page was contributed by Bartosz Fenski. + * v2.1.4: Fixed --info output. Generate random directory name when + extracting files to . to avoid problems. Better handling of errors with + wrong permissions for the directory containing the files. Avoid some + race conditions, Unset the $CDPATH variable to avoid problems if it is + set. Better handling of dot files in the archive directory. + * v2.1.5: Made the md5sum detection consistent with the header code. Check + for the presence of the archive directory. Added --encrypt for symmetric + encryption through gpg (Eric Windisch). Added support for the digest + command on Solaris 10 for MD5 checksums. Check for available disk space + before extracting to the target directory (Andreas Schweitzer). Allow + extraction to run asynchronously (patch by Peter Hatch). Use file + descriptors internally to avoid error messages (patch by Kay Tiong + Khoo). + +Links + + * Check out the [15]"Loki setup" installer, used to install many Linux + games and other applications, and of which I am the co-author. Since the + demise of Loki, I am now the official maintainer of the project, and it + is now being hosted on [16]icculus.org, as well as a bunch of other + ex-Loki projects (and a lot of other good stuff!). + * Bjarni R. Einarsson also wrote the setup.sh installer script, inspired + by Makeself. [17]Check it out ! + +Contact + + This script was written by [18]Stéphane Peter (megastep at megastep.org) I + welcome any enhancements and suggestions. + + Contributions were included from John C. Quillan, Bjarni R. Einarsson, + Francois Petitjean, and Ryan C. Gordon, thanks to them! If you think I + forgot your name, don't hesitate to contact me. + + icculus.org also has a [19]Bugzilla server available that allows bug reports + to be submitted for Loki setup, and since Makeself is a part of Loki setup, + you can submit bug reports from there! + _________________________________________________________________ + + + [20]Stéphane Peter + + Last modified: Fri Jan 4 15:51:05 PST 2008 + +References + + 1. http://mowser.com/web/megastep.org/makeself/ + 2. http://www.megastep.org/makeself/makeself.run + 3. mailto:megastep@REMOVEME.megastep.org + 4. http://www.idsoftware.com/ + 5. http://www.lokigames.com/products/myth2/updates.php3 + 6. http://www.nvidia.com/ + 7. http://earth.google.com/ + 8. http://www.megastep.org/makeself/makeself.run + 9. http://www.megastep.org/makeself/makeself.run + 10. http://www.gnu.org/copyleft/gpl.html + 11. http://www.megastep.org/makeself/makeself-2.1.5.run + 12. http://cvs.icculus.org/ + 13. http://www.icculus.org/loki_setup/ + 14. http://www.unrealtournament2003.com/ + 15. http://www.icculus.org/loki_setup/ + 16. http://www.icculus.org/ + 17. http://www.mmedia.is/~bre/programs/setup.sh/ + 18. mailto:megastep@@megastep.org + 19. https://bugzilla.icculus.org/ + 20. mailto:megastep@@megastep.org Property changes on: trunk/build/install/README ___________________________________________________________________ Name: svn:eol-style + native Added: trunk/build/install/makeself-header.sh =================================================================== --- trunk/build/install/makeself-header.sh (rev 0) +++ trunk/build/install/makeself-header.sh 2008-02-05 07:33:29 UTC (rev 1352) @@ -0,0 +1,401 @@ +cat << EOF > "$archname" +#!/bin/sh +# This script was generated using Makeself $MS_VERSION + +CRCsum="$CRCsum" +MD5="$MD5sum" +TMPROOT=\${TMPDIR:=/tmp} + +label="$LABEL" +script="$SCRIPT" +scriptargs="$SCRIPTARGS" +targetdir="$archdirname" +filesizes="$filesizes" +keep=$KEEP + +print_cmd_arg="" +if type printf > /dev/null; then + print_cmd="printf" +elif test -x /usr/ucb/echo; then + print_cmd="/usr/ucb/echo" +else + print_cmd="echo" +fi + +unset CDPATH + +MS_Printf() +{ + \$print_cmd \$print_cmd_arg "\$1" +} + +MS_Progress() +{ + while read a; do + MS_Printf . + done +} + +MS_diskspace() +{ + ( + if test -d /usr/xpg4/bin; then + PATH=/usr/xpg4/bin:\$PATH + fi + df -kP "\$1" | tail -1 | awk '{print \$4}' + ) +} + +MS_dd() +{ + blocks=\`expr \$3 / 1024\` + bytes=\`expr \$3 % 1024\` + dd if="\$1" ibs=\$2 skip=1 obs=1024 conv=sync 2> /dev/null | \\ + { test \$blocks -gt 0 && dd ibs=1024 obs=1024 count=\$blocks ; \\ + test \$bytes -gt 0 && dd ibs=1 obs=1024 count=\$bytes ; } 2> /dev/null +} + +MS_Help() +{ + cat << EOH >&2 +Makeself version $MS_VERSION + 1) Getting help or info about \$0 : + \$0 --help Print this message + \$0 --info Print embedded info : title, default target directory, embedded script ... + \$0 --lsm Print embedded lsm entry (or no LSM) + \$0 --list Print the list of files in the archive + \$0 --check Checks integrity of the archive + + 2) Running \$0 : + \$0 [options] [--] [additional arguments to embedded script] + with following options (in that order) + --confirm Ask before running embedded script + --noexec Do not run embedded script + --keep Do not erase target directory after running + the embedded script + --nox11 Do not spawn an xterm + --nochown Do not give the extracted files to the current user + --target NewDirectory Extract in NewDirectory + --tar arg1 [arg2 ...] Access the contents of the archive through the tar command + -- Following arguments will be passed to the embedded script +EOH +} + +MS_Check() +{ + OLD_PATH="\$PATH" + PATH=\${GUESS_MD5_PATH:-"\$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"} + MD5_ARG="" + MD5_PATH=\`exec <&- 2>&-; which md5sum || type md5sum\` + test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which md5 || type md5\` + test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which digest || type digest\` + PATH="\$OLD_PATH" + + MS_Printf "Verifying archive integrity..." + offset=\`head -n $SKIP "\$1" | wc -c | tr -d " "\` + verb=\$2 + i=1 + for s in \$filesizes + do + crc=\`echo \$CRCsum | cut -d" " -f\$i\` + if test -x "\$MD5_PATH"; then + if test \`basename \$MD5_PATH\` = digest; then + MD5_ARG="-a md5" + fi + md5=\`echo \$MD5 | cut -d" " -f\$i\` + if test \$md5 = "00000000000000000000000000000000"; then + test x\$verb = xy && echo " \$1 does not contain an embedded MD5 checksum." >&2 + else + md5sum=\`MS_dd "\$1" \$offset \$s | eval "\$MD5_PATH \$MD5_ARG" | cut -b-32\`; + if test "\$md5sum" != "\$md5"; then + echo "Error in MD5 checksums: \$md5sum is different from \$md5" >&2 + exit 2 + else + test x\$verb = xy && MS_Printf " MD5 checksums are OK." >&2 + fi + crc="0000000000"; verb=n + fi + fi + if test \$crc = "0000000000"; then + test x\$verb = xy && echo " \$1 does not contain a CRC checksum." >&2 + else + sum1=\`MS_dd "\$1" \$offset \$s | CMD_ENV=xpg4 cksum | awk '{print \$1}'\` + if test "\$sum1" = "\$crc"; then + test x\$verb = xy && MS_Printf " CRC checksums are OK." >&2 + else + echo "Error in checksums: \$sum1 is different from \$crc" + exit 2; + fi + fi + i=\`expr \$i + 1\` + offset=\`expr \$offset + \$s\` + done + echo " All good." +} + +UnTAR() +{ + tar \$1vf - 2>&1 || { echo Extraction failed. > /dev/tty; kill -15 \$$; } +} + +finish=true +xterm_loop= +nox11=$NOX11 +copy=$COPY +ownership=y +verbose=n + +initargs="\$@" + +while true +do + case "\$1" in + -h | --help) + MS_Help + exit 0 + ;; + --info) + echo Identification: "\$label" + echo Target directory: "\$targetdir" + echo Uncompressed size: $USIZE KB + echo Compression: $COMPRESS + echo Date of packaging: $DATE + echo Built with Makeself version $MS_VERSION on $OSTYPE + echo Build command was: "$MS_COMMAND" + if test x\$script != x; then + echo Script run after extraction: + echo " " \$script \$scriptargs + fi + if test x"$copy" = xcopy; then + echo "Archive will copy itself to a temporary location" + fi + if test x"$KEEP" = xy; then + echo "directory \$targetdir is permanent" + else + echo "\$targetdir will be removed after extraction" + fi + exit 0 + ;; + --dumpconf) + echo LABEL=\"\$label\" + echo SCRIPT=\"\$script\" + echo SCRIPTARGS=\"\$scriptargs\" + echo archdirname=\"$archdirname\" + echo KEEP=$KEEP + echo COMPRESS=$COMPRESS + echo filesizes=\"\$filesizes\" + echo CRCsum=\"\$CRCsum\" + echo MD5sum=\"\$MD5\" + echo OLDUSIZE=$USIZE + echo OLDSKIP=`expr $SKIP + 1` + exit 0 + ;; + --lsm) +cat << EOLSM +EOF +eval "$LSM_CMD" +cat << EOF >> "$archname" +EOLSM + exit 0 + ;; + --list) + echo Target directory: \$targetdir + offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\` + for s in \$filesizes + do + MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | UnTAR t + offset=\`expr \$offset + \$s\` + done + exit 0 + ;; + --tar) + offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\` + arg1="\$2" + shift 2 + for s in \$filesizes + do + MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | tar "\$arg1" - \$* + offset=\`expr \$offset + \$s\` + done + exit 0 + ;; + --check) + MS_Check "\$0" y + exit 0 + ;; + --confirm) + verbose=y + shift + ;; + --noexec) + script="" + shift + ;; + --keep) + keep=y + shift + ;; + --target) + keep=y + targetdir=\${2:-.} + shift 2 + ;; + --nox11) + nox11=y + shift + ;; + --nochown) + ownership=n + shift + ;; + --xwin) + finish="echo Press Return to close this window...; read junk" + xterm_loop=1 + shift + ;; + --phase2) + copy=phase2 + shift + ;; + --) + shift + break ;; + -*) + echo Unrecognized flag : "\$1" >&2 + MS_Help + exit 1 + ;; + *) + break ;; + esac +done + +case "\$copy" in +copy) + tmpdir=\$TMPROOT/makeself.\$RANDOM.\`date +"%y%m%d%H%M%S"\`.\$\$ + mkdir "\$tmpdir" || { + echo "Could not create temporary directory \$tmpdir" >&2 + exit 1 + } + SCRIPT_COPY="\$tmpdir/makeself" + echo "Copying to a temporary location..." >&2 + cp "\$0" "\$SCRIPT_COPY" + chmod +x "\$SCRIPT_COPY" + cd "\$TMPROOT" + exec "\$SCRIPT_COPY" --phase2 -- \$initargs + ;; +phase2) + finish="\$finish ; rm -rf \`dirname \$0\`" + ;; +esac + +if test "\$nox11" = "n"; then + if tty -s; then # Do we have a terminal? + : + else + if test x"\$DISPLAY" != x -a x"\$xterm_loop" = x; then # No, but do we have X? + if xset q > /dev/null 2>&1; then # Check for valid DISPLAY variable + GUESS_XTERMS="xterm rxvt dtterm eterm Eterm kvt konsole aterm" + for a in \$GUESS_XTERMS; do + if type \$a >/dev/null 2>&1; then + XTERM=\$a + break + fi + done + chmod a+x \$0 || echo Please add execution rights on \$0 + if test \`echo "\$0" | cut -c1\` = "/"; then # Spawn a terminal! + exec \$XTERM -title "\$label" -e "\$0" --xwin "\$initargs" + else + exec \$XTERM -title "\$label" -e "./\$0" --xwin "\$initargs" + fi + fi + fi + fi +fi + +if test "\$targetdir" = "."; then + tmpdir="." +else + if test "\$keep" = y; then + echo "Creating directory \$targetdir" >&2 + tmpdir="\$targetdir" + dashp="-p" + else + tmpdir="\$TMPROOT/selfgz\$\$\$RANDOM" + dashp="" + fi + mkdir \$dashp \$tmpdir || { + echo 'Cannot create target directory' \$tmpdir >&2 + echo 'You should try option --target OtherDirectory' >&2 + eval \$finish + exit 1 + } +fi + +location="\`pwd\`" +if test x\$SETUP_NOCHECK != x1; then + MS_Check "\$0" +fi +offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\` + +if test x"\$verbose" = xy; then + MS_Printf "About to extract $USIZE KB in \$tmpdir ... Proceed ? [Y/n] " + read yn + if test x"\$yn" = xn; then + eval \$finish; exit 1 + fi +fi + +MS_Printf "Uncompressing \$label" +res=3 +if test "\$keep" = n; then + trap 'echo Signal caught, cleaning up >&2; cd \$TMPROOT; /bin/rm -rf \$tmpdir; eval \$finish; exit 15' 1 2 3 15 +fi + +leftspace=\`MS_diskspace \$tmpdir\` +if test \$leftspace -lt $USIZE; then + echo + echo "Not enough space left in "\`dirname \$tmpdir\`" (\$leftspace KB) to decompress \$0 ($USIZE KB)" >&2 + if test "\$keep" = n; then + echo "Consider setting TMPDIR to a directory with more free space." + fi + eval \$finish; exit 1 +fi + +for s in \$filesizes +do + if MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | ( cd "\$tmpdir"; UnTAR x ) | MS_Progress; then + if test x"\$ownership" = xy; then + (PATH=/usr/xpg4/bin:\$PATH; cd "\$tmpdir"; chown -R \`id -u\` .; chgrp -R \`id -g\` .) + fi + else + echo + echo "Unable to decompress \$0" >&2 + eval \$finish; exit 1 + fi + offset=\`expr \$offset + \$s\` +done +echo + +cd "\$tmpdir" +res=0 +if test x"\$script" != x; then + if test x"\$verbose" = xy; then + MS_Printf "OK to execute: \$script \$scriptargs \$* ? [Y/n] " + read yn + if test x"\$yn" = x -o x"\$yn" = xy -o x"\$yn" = xY; then + eval \$script \$scriptargs \$*; res=\$?; + fi + else + eval \$script \$scriptargs \$*; res=\$? + fi + if test \$res -ne 0; then + test x"\$verbose" = xy && echo "The program '\$script' returned an error code (\$res)" >&2 + fi +fi +if test "\$keep" = n; then + cd \$TMPROOT + /bin/rm -rf \$tmpdir +fi +eval \$finish; exit \$res +EOF Property changes on: trunk/build/install/makeself-header.sh ___________________________________________________________________ Name: svn:eol-style + native Added: trunk/build/install/makeself.sh =================================================================== --- trunk/build/install/makeself.sh (rev 0) +++ trunk/build/install/makeself.sh 2008-02-05 07:33:29 UTC (rev 1352) @@ -0,0 +1,407 @@ +#!/bin/sh +# +# Makeself version 2.1.x +# by Stephane Peter <megastep(a)megastep.org&gt; +# +# $Id: makeself.sh,v 1.64 2008/01/04 23:52:14 megastep Exp $ +# +# Utility to create self-extracting tar.gz archives. +# The resulting archive is a file holding the tar.gz archive with +# a small Shell script stub that uncompresses the archive to a temporary +# directory and then executes a given script from withing that directory. +# +# Makeself home page: http://www.megastep.org/makeself/ +# +# Version 2.0 is a rewrite of version 1.0 to make the code easier to read and maintain. +# +# Version history : +# - 1.0 : Initial public release +# - 1.1 : The archive can be passed parameters that will be passed on to +# the embedded script, thanks to John C. Quillan +# - 1.2 : Package distribution, bzip2 compression, more command line options, +# support for non-temporary archives. Ideas thanks to Francois Petitjean +# - 1.3 : More patches from Bjarni R. Einarsson and Francois Petitjean: +# Support for no compression (--nocomp), script is no longer mandatory, +# automatic launch in an xterm, optional verbose output, and -target +# archive option to indicate where to extract the files. +# - 1.4 : Improved UNIX compatibility (Francois Petitjean) +# Automatic integrity checking, support of LSM files (Francois Petitjean) +# - 1.5 : Many bugfixes. Optionally disable xterm spawning. +# - 1.5.1 : More bugfixes, added archive options -list and -check. +# - 1.5.2 : Cosmetic changes to inform the user of what's going on with big +# archives (Quake III demo) +# - 1.5.3 : Check for validity of the DISPLAY variable before launching an xterm. +# More verbosity in xterms and check for embedded command's return value. +# Bugfix for Debian 2.0 systems that have a different "print" command. +# - 1.5.4 : Many bugfixes. Print out a message if the extraction failed. +# - 1.5.5 : More bugfixes. Added support for SETUP_NOCHECK environment variable to +# bypass checksum verification of archives. +# - 1.6.0 : Compute MD5 checksums with the md5sum command (patch from Ryan Gordon) +# - 2.0 : Brand new rewrite, cleaner architecture, separated header and UNIX ports. +# - 2.0.1 : Added --copy +# - 2.1.0 : Allow multiple tarballs to be stored in one archive, and incremental updates. +# Added --nochown for archives +# Stopped doing redundant checksums when not necesary +# - 2.1.1 : Work around insane behavior from certain Linux distros with no 'uncompress' command +# Cleaned up the code to handle error codes from compress. Simplified the extraction code. +# - 2.1.2 : Some bug fixes. Use head -n to avoid problems. +# - 2.1.3 : Bug fixes with command line when spawning terminals. +# Added --tar for archives, allowing to give arbitrary arguments to tar on the contents of the archive. +# Added --noexec to prevent execution of embedded scripts. +# Added --nomd5 and --nocrc to avoid creating checksums in archives. +# Added command used to create the archive in --info output. +# Run the embedded script through eval. +# - 2.1.4 : Fixed --info output. +# Generate random directory name when extracting files to . to avoid problems. (Jason Trent) +# Better handling of errors with wrong permissions for the directory containing the files. (Jason Trent) +# Avoid some race conditions (Ludwig Nussel) +# Unset the $CDPATH variable to avoid problems if it is set. (Debian) +# Better handling of dot files in the archive directory. +# - 2.1.5 : Made the md5sum detection consistent with the header code. +# Check for the presence of the archive directory +# Added --encrypt for symmetric encryption through gpg (Eric Windisch) +# Added support for the digest command on Solaris 10 for MD5 checksums +# Check for available disk space before extracting to the target directory (Andreas Schweitzer) +# Allow extraction to run asynchronously (patch by Peter Hatch) +# Use file descriptors internally to avoid error messages (patch by Kay Tiong Khoo) +# +# (C) 1998-2008 by St�phane Peter <megastep(a)megastep.org&gt; +# +# This software is released under the terms of the GNU GPL version 2 and above +# Please read the license at http://www.gnu.org/copyleft/gpl.html +# + +MS_VERSION=2.1.5 +MS_COMMAND="$0" +unset CDPATH + +for f in "${1+"$@"}"; do + MS_COMMAND="$MS_COMMAND \\\\ + \\\"$f\\\"" +done + +# Procedures + +MS_Usage() +{ + echo "Usage: $0 [params] archive_dir file_name label [startup_script] [args]" + echo "params can be one or more of the following :" + echo " --version | -v : Print out Makeself version number and exit" + echo " --help | -h : Print out this help message" + echo " --gzip : Compress using gzip (default if detected)" + echo " --bzip2 : Compress using bzip2 instead of gzip" + echo " --compress : Compress using the UNIX 'compress' command" + echo " --nocomp : Do not compress the data" + echo " --notemp : The archive will create archive_dir in the" + echo " current directory and uncompress in ./archive_dir" + echo " --copy : Upon extraction, the archive will first copy itself to" + echo " a temporary directory" + echo " --append : Append more files to an existing Makeself archive" + echo " The label and startup scripts will then be ignored" + echo " --current : Files will be extracted to the current directory." + echo " Implies --notemp." + echo " --nomd5 : Don't calculate an MD5 for archive" + echo " --nocrc : Don't calculate a CRC for archive" + echo " --header file : Specify location of the header script" + echo " --follow : Follow the symlinks in the archive" + echo " --nox11 : Disable automatic spawn of a xterm" + echo " --nowait : Do not wait for user input after executing embedded" + echo " program from an xterm" + echo " --lsm file : LSM file describing the package" + echo + echo "Do not forget to give a fully qualified startup script name" + echo "(i.e. with a ./ prefix if inside the archive)." + exit 1 +} + +# Default settings +if type gzip 2>&1 > /dev/null; then + COMPRESS=gzip +else + COMPRESS=Unix +fi +KEEP=n +CURRENT=n +NOX11=n +APPEND=n +COPY=none +TAR_ARGS=cvf +HEADER=`dirname $0`/makeself-header.sh + +# LSM file stuff +LSM_CMD="echo No LSM. >> \"\$archname\"" + +while true +do + case "$1" in + --version | -v) + echo Makeself version $MS_VERSION + exit 0 + ;; + --bzip2) + COMPRESS=bzip2 + shift + ;; + --gzip) + COMPRESS=gzip + shift + ;; + --compress) + COMPRESS=Unix + shift + ;; + --encrypt) + COMPRESS=gpg + shift + ;; + --nocomp) + COMPRESS=none + shift + ;; + --notemp) + KEEP=y + shift + ;; + --copy) + COPY=copy + shift + ;; + --current) + CURRENT=y + KEEP=y + shift + ;; + --header) + HEADER="$2" + shift 2 + ;; + --follow) + TAR_ARGS=cvfh + shift + ;; + --nox11) + NOX11=y + shift + ;; + --nowait) + shift + ;; + --nomd5) + NOMD5=y + shift + ;; + --nocrc) + NOCRC=y + shift + ;; + --append) + APPEND=y + shift + ;; + --lsm) + LSM_CMD="cat \"$2\" >> \"\$archname\"" + shift 2 + ;; + -h | --help) + MS_Usage + ;; + -*) + echo Unrecognized flag : "$1" + MS_Usage + ;; + *) + break + ;; + esac +done + +if test $# -lt 1; then + MS_Usage +else + if test -d "$1"; then + archdir="$1" + else + echo "Directory $1 does not exist." + exit 1 + fi +fi +archname="$2" + +if test "$APPEND" = y; then + if test $# -lt 2; then + MS_Usage + fi + + # Gather the info from the original archive + OLDENV=`sh "$archname" --dumpconf` + if test $? -ne 0; then + echo "Unable to update archive: $archname" >&2 + exit 1 + else + eval "$OLDENV" + fi +else + if test "$KEEP" = n -a $# = 3; then + echo "ERROR: Making a temporary archive with no embedded command does not make sense!" >&2 + echo + MS_Usage + fi + # We don't really want to create an absolute directory... + if test "$CURRENT" = y; then + archdirname="." + else + archdirname=`basename "$1"` + fi + + if test $# -lt 3; then + MS_Usage + fi + + LABEL="$3" + SCRIPT="$4" + test x$SCRIPT = x || shift 1 + shift 3 + SCRIPTARGS="$*" +fi + +if test "$KEEP" = n -a "$CURRENT" = y; then + echo "ERROR: It is A VERY DANGEROUS IDEA to try to combine --notemp and --current." >&2 + exit 1 +fi + +case $COMPRESS in +gzip) + GZIP_CMD="gzip -c9" + GUNZIP_CMD="gzip -cd" + ;; +bzip2) + GZIP_CMD="bzip2 -9" + GUNZIP_CMD="bzip2 -d" + ;; +gpg) + GZIP_CMD="gpg -ac -z9" + GUNZIP_CMD="gpg -d" + ;; +Unix) + GZIP_CMD="compress -cf" + GUNZIP_CMD="exec 2>&-; uncompress -c || test \\\$? -eq 2 || gzip -cd" + ;; +none) + GZIP_CMD="cat" + GUNZIP_CMD="cat" + ;; +esac + +tmpfile="${TMPDIR:=/tmp}/mkself$$" + +if test -f $HEADER; then + oldarchname="$archname" + archname="$tmpfile" + # Generate a fake header to count its lines + SKIP=0 + . $HEADER + SKIP=`cat "$tmpfile" |wc -l` + # Get rid of any spaces + SKIP=`expr $SKIP` + rm -f "$tmpfile" + echo Header is $SKIP lines long >&2 + + archname="$oldarchname" +else + echo "Unable to open header file: $HEADER" >&2 + exit 1 +fi + +echo + +if test "$APPEND" = n; then + if test -f "$archname"; then + echo "WARNING: Overwriting existing file: $archname" >&2 + fi +fi + +USIZE=`du -ks $archdir | cut -f1` +DATE=`LC_ALL=C date` + +if test "." = "$archdirname"; then + if test "$KEEP" = n; then + archdirname="makeself-$$-`date +%Y%m%d%H%M%S`" + fi +fi + +test -d "$archdir" || { echo "Error: $archdir does not exist."; rm -f "$tmpfile"; exit 1; } +echo About to compress $USIZE KB of data... +echo Adding files to archive named \"$archname\"... +exec 3<> "$tmpfile" +(cd "$archdir" && ( tar $TAR_ARGS - . | eval "$GZIP_CMD" >&3 ) ) || { echo Aborting: Archive directory not found or temporary file: "$tmpfile" could not be created.; exec 3>&-; rm -f "$tmpfile"; exit 1; } +exec 3>&- # try to close the archive + +fsize=`cat "$tmpfile" | wc -c | tr -d " "` + +# Compute the checksums + +md5sum=00000000000000000000000000000000 +crcsum=0000000000 + +if test "$NOCRC" = y; then + echo "skipping crc at user request" +else + crcsum=`cat "$tmpfile" | CMD_ENV=xpg4 cksum | sed -e 's/ /Z/' -e 's/ /Z/' | cut -dZ -f1` + echo "CRC: $crcsum" +fi + +if test "$NOMD5" = y; then + echo "skipping md5sum at user request" +else + # Try to locate a MD5 binary + OLD_PATH=$PATH + PATH=${GUESS_MD5_PATH:-"$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"} + MD5_ARG="" + MD5_PATH=`exec <&- 2>&-; which md5sum || type md5sum` + test -x $MD5_PATH || MD5_PATH=`exec <&- 2>&-; which md5 || type md5` + test -x $MD5_PATH || MD5_PATH=`exec <&- 2>&-; which digest || type digest` + PATH=$OLD_PATH + if test `basename $MD5_PATH` = digest; then + MD5_ARG="-a md5" + fi + if test -x "$MD5_PATH"; then + md5sum=`cat "$tmpfile" | eval "$MD5_PATH $MD5_ARG" | cut -b-32`; + echo "MD5: $md5sum" + else + echo "MD5: none, MD5 command not found" + fi +fi + +if test "$APPEND" = y; then + mv "$archname" "$archname".bak || exit + + # Prepare entry for new archive + filesizes="$filesizes $fsize" + CRCsum="$CRCsum $crcsum" + MD5sum="$MD5sum $md5sum" + USIZE=`expr $USIZE + $OLDUSIZE` + # Generate the header + . $HEADER + # Append the original data + tail -n +$OLDSKIP "$archname".bak >> "$archname" + # Append the new data + cat "$tmpfile" >> "$archname" + + chmod +x "$archname" + rm -f "$archname".bak + echo Self-extractible archive \"$archname\" successfully updated. +else + filesizes="$fsize" + CRCsum="$crcsum" + MD5sum="$md5sum" + + # Generate the header + . $HEADER + + # Append the compressed tar data after the stub + echo + cat "$tmpfile" >> "$archname" + chmod +x "$archname" + echo Self-extractible archive \"$archname\" successfully created. +fi +rm -f "$tmpfile" Property changes on: trunk/build/install/makeself.sh ___________________________________________________________________ Name: svn:eol-style + native