Error Inserting events into drools fusion stream
by Ayush
Hi All,
I'm trying to implement drools fusion into my app. The scenario of my app is
as follows:
- Facts will be received continuosly.
- On receving fact I'm generating a new event and adding it into a new
working memory entry point stream. Also I'm adding facts into session coz
I'll be updating them.
- I need to apply rules on continuous stream of events.
- I've not used any camel + spring or pipeline. Are these mandatory to use?
For 1st fact everything works fine but when I receive 2nd fact I'm getting
Now when I'm trying to get entry point on receive of 2nd alarm I'm getting
org.drools.RuntimeDroolsException: Unexpected exception executing action
org.drools.reteoo.PropagationQueuingNode$PropagateAction@9ff411 Caused by:
java.util.concurrent.RejectedExecutionException.
On debug I found that the above exception is coming when I'm calling
session.getWorkingMemoryEntryPoint("MyStream"); Can anyone please help me
that how should I insert facts and events into working memory?
I'd invested ample amount of time searching for this but I'm empty handed.
Guys please help this is very urgent for me. Thanks in anticipation
--
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/Error-Inserting-event...
Sent from the Drools - User mailing list archive at Nabble.com.
12 years, 3 months
Date equal comparison fails - don't understand why
by Saloojee, Karim
Hi
I am comparing SimpleAccount( dateAccountOpened == "5-Feb-2011")
where dateAccountOpened is "Sat Feb 05 00:00:00 GMT+02:00 2011" (if you
call toString()). The equal comparator fails (==) but the greater than
comparator passes (>) which I don't understand.
I feel I am missing something obvious here, but I have no idea what it
is.
rule "Test date equality"
when
$acc : SimpleAccount( dateAccountOpened == "5-Feb-2011")
then
System.out.println("Expected and found an account opened
on 5-Feb-2011: " + $acc);
end
rule "Some dates are more equal than others"
when
$acc : SimpleAccount( dateAccountOpened > "5-Feb-2011")
then
System.out.println("Unexpected match: " +
$acc.getDateAccountOpened());
end
Regards,
Karim
To read FirstRand Bank's Disclaimer for this email click on the following address or copy into your Internet browser:
https://www.fnb.co.za/disclaimer.html
If you are unable to access the Disclaimer, send a blank e-mail to
firstrandbankdisclaimer(a)fnb.co.za and we will send you a copy of the Disclaimer.
12 years, 7 months
Drools server and knowledge agent functionality
by Manuel Ortiz
Hello everybody:
I am taking a look at Drools Integration documentation to understand how
Drools server works and how can be used, and have a doubt concerning, let's
say... 'KnowledgeAgent capabilities'. Does Drools server support on the fly
rule updating as when using KnowledgeAgent to create KnowledgeBase objects?
If it does, where can be configured 'KnowledgeAgent related' properties such
as newInstance or resource scanner interval?
Thank you in advance for your time.
Kind regards,
Manuel Ortiz.
12 years, 7 months
Question about custom accumulation functions
by Bruno Freudensprung
Hi,
While testing my custom accumulation function I noticed an unexpected
behavior (th'ats of course a personal point of view).
It seems that Drools 5.1 calls accumulate(...) and getResult(...) as
many times as the number of accumulated facts (accumulate, getResult,
accumulate, getResult, etc...).
Is it supposed to work like this?
Best regards,
Bruno.
12 years, 8 months
Dependency enumeration
by agarwalk
Hi
I have created following enumeration and java class file.
*Enumeration:*
'OrderData.propertyState':(new com.asps.rules.OrderData()).loadStates()
'OrderData.fulfillmentReviewerName[propertyState]':'(new
com.asps.rules.OrderData()).loadReviewers("@{propertyState}")'
*Java class:*
public class OrderData implements Serializable {
private String propertyState;
private String fulfillmentReviewerName;
// getters and setters
public List<String> loadStates() {
List<String> states = new ArrayList<String>();
states.add("CA");
states.add("NY");
states.add("FL");
return states;
}
public List<String> loadReviewers(final String propertyState) {
List<String> reviewers = new ArrayList<String>();
System.out.println("### in load reviewers ### : " + propertyState);
if ("CA".equalsIgnoreCase(propertyState)) {
reviewers.add("A");
reviewers.add("B");
System.out.println("Reviewers : A & B");
} else if ("NY".equalsIgnoreCase(propertyState)) {
reviewers.add("C");
reviewers.add("D");
System.out.println("Reviewers : C& D");
} else if ("FL".equalsIgnoreCase(propertyState)) {
reviewers.add("E");
reviewers.add("F");
System.out.println("Reviewers : E& F");
} else {
reviewers.add("G");
reviewers.add("H");
System.out.println("Reviewers : G& H");
}
return reviewers;
}
}
I created a rule as follows
WHEN
There is an OrderData with:
propertyState[propertyState]* FL* --- This is a drop down which
is being displayed correctly
fulfillmentReviewerName [fulfillmentReviewerName] -- This should
have been the drop down. Values are dependent on the state selected.
When i try to create above rule the enumeration is loaded correctly for
propertyState but the enumeration is not loaded for fulfillmentReviewerName
field. When I saw the logs the correct method and condition is being
invoked (as per Sys out)but drop down does not contain anything.
ANy suggestions?
--
View this message in context: http://drools.46999.n3.nabble.com/Dependency-enumeration-tp3245703p324570...
Sent from the Drools: User forum mailing list archive at Nabble.com.
12 years, 9 months
Guvnor - Loading enums programatically using rule metadata
by GPatel＠tsys.com
The Guvnor manual specifies how to load enum data programtically but it
seems like only other fields on the same Fact can be used to filter the
values that can show up in the drop-down fields, as shown below:
'Fact.field[dependentField1, dependentField2]' : '(new
com.yourco.DataHelper()).getListOfAges("@{dependentField1}",
"@{dependentField2}")'
Is it possible to somehow use other rule attributes, like package name or
rule metadata to filter the list? Something like the following:
'Fact.field[dependentField1]' : '(new
com.yourco.DataHelper()).getListOfAges("@{dependentField1}",
drools.getRule().getMetaData().get("ID"))'
Thanks
G. Patel
-----------------------------------------
The information contained in this communication (including any
attachments hereto) is confidential and is intended solely for the
personal and confidential use of the individual or entity to whom
it is addressed. If the reader of this message is not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this
communication in error and that any review, dissemination, copying,
or unauthorized use of this information, or the taking of any
action in reliance on the contents of this information is strictly
prohibited. If you have received this communication in error,
please notify us immediately by e-mail, and delete the original
message. Thank you
12 years, 10 months
how to debug rules in JBoss AS?
by Marina
Hello,
I know one can debug rules (put breakpoints in .drl and ruleflow files) when
running/debugging an application as a Drools Application.
However, I would like to debug rules when my application is running in JBoss AS
- just like we do a normal debugging of a Remote application running in a
different JVM ,by enabling the JDWP on the server
(-Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n) and then
connecting to the specified port.
Basically, I would like to be able to debug both my Java classes and rules
together. Is it possible?
thanks,
Marina
12 years, 10 months
Fire Rule in Stateless Knowledge Session
by snehils
Hi,
I am new in Drools. I am using Drools version 5.1.0
My requirement is kind of request response, where I have to perform some
checks for the request and respond the result. Hence, I decided to go with
stateless knowledge session.
I have prepared .DRL file and it contains set of rules. When some request
receives I have to identify the rule(s) belongs to that request and then
fire the rule(s).
I am not able to figure out how to categories the rules request wise in DRL
file? Also, how to fire only those rules which belongs to the category.
For example, there are three kinds of requests Rq1, Rq2 and Rq3. There are
rules in DRL file: R1, R2, R3, R4 and R5. R1, R2 belongs to Rq1, R3 belongs
to Rq2 and R4, R5 belongs to Rq3.
When some request receives only its belonging rules should be fired. For
example, on receiving of Rq2 only R3 should be fired.
Please provide me some code snipped or link.
Thanks
--
View this message in context: http://drools.46999.n3.nabble.com/Fire-Rule-in-Stateless-Knowledge-Sessio...
Sent from the Drools: User forum mailing list archive at Nabble.com.
13 years
"Rule-Id" for a Drools Rule
by harishtejwani
All:
We are using Drools to detect specific events/conditions in our system.
In the 'then' condition of Drools rule, we would like to persist the "Rule
Id" of the rule that created the specific event/condition
This is because all our reporting is based on "rules" as filters, where
users can look at exceptions by specific rules.
Is there a suggestion or sample as how can the "Rule Id" be persisted or
indicated in the then condition that is immutable or can be long-lived. The
current approach of using Rule Name itself as the ID is brittle as this can
be changed and suddenly all reports would break.
If we assign ID's to rules, where do we keep the mapping of RULE ID to
Rules. If we store rules in GUVRNOR is there a way we can get Rule Id's for
Rules?
Best regards
Harish Tejwani
--
View this message in context: http://drools.46999.n3.nabble.com/Rule-Id-for-a-Drools-Rule-tp2914385p291...
Sent from the Drools: User forum mailing list archive at Nabble.com.
13 years, 2 months
