KnowledgeAgent and applyChangeSet
by bob.breitling
If I have a KnowledgeAgent and I create a URL Resource and set its
basicAuthenication, username and password attributes then I call the agents
applyChangeSet method I get a HTTPD 401 response from the Guvnor. It does
not happen to my resourse which has a valid username and password, but it
happens to the resource in the changeSet xml tag.
It would seem to me that the resources that are built from the resource I
passed would inherit the basicAuthenication, username and password
attributes that I set and know work, but they don't and I get this error.
If I debug the code and filling in those values on the resource passed to
the createPackageFromResource method before the resource stream is read the
code works.
I am using the NilAuthenicator in the Guvnor components.xml and that seems
to be working. I get access to the Guvnor without being asked for
credentials.
I tried to configure my jboss (4.2.0) in login-config.xml to allow access to
everything as guest. But no luck.
Any suggestions?
Bob
--
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/KnowledgeAgent-and-ap...
Sent from the Drools - User mailing list archive at Nabble.com.
12 years, 11 months
OSGi version of Drools
by Flavius Vespasianus
Hello,
is there anywhere a OSGi bundle with Drools 4.0.7? I know about
com.springsource.org.drools.* but these had a lot of additional
dependencies and I wasn't able to get them work.
My problem is that I need to have three projects: one is the basic
library which uses Drools very intensively. The second project is editor
- an Eclipse plugin (that's why I need the OSGi bundle) using some
classes from the basic library. It doesn't use Drools, but there is a
dependency. The third project is classic Java application, also using
the basic library.
The basic library was originally created using standard Drools project
wizard (I have downloaded the Eclipse Drools plugin -
org.drools.eclipse). But when I tried to deploy it as an Eclipse plugin,
it couldn't find the Drools classes.
I found a little workaround - I have compiled the binaries (drools-core,
drools-compiler and from libs the mvel, antlr3 and eclipse-jdt-core)
into separate plugin using "Create a plugin from existing jars" wizard.
But if I add this dependency to the basic library, I get a
NullPointerException error on every dslr file and I cannot run the
application properly). At least the second project (editor) can be compiled.
What am I doing wrong? Or can I find somewhere the binaries compiled
correctly into OSGi bundle?
Thanks a lot!
Flavius
12 years, 11 months
Drools Expert 5 OSGi
by jflamy
I want to manage Drools Expert rules with Drools Guvnor. My understanding is
that requires the use of Drools Expert version 5.
I also need to use an OSGi-packaged version of Drools Expert.
I saw a forum posting in 2010 alluding to such a beast, but the springsource
forums only provide 4.0.7.
Is there a ready-made OSGi bundle for drools expert 5, or alternately
specific instructions for building one ?
Jean-François Lamy
--
View this message in context: http://n3.nabble.com/Drools-Expert-5-OSGi-tp681546p681546.html
Sent from the Drools - User mailing list archive at Nabble.com.
12 years, 11 months
Drools Server 5.1.1 - can't run test.jsp
by OlliSee
Hi there.
I was trying to setup the Drools Server. As I understand, this is not a
server per se, its just the usual Drools with some framework plumbing. But I
appreciate not having to do that myself. But I can't get it to work.
I imported the .war file into my Eclipse and tried to deploy it to a few
application servers, but it didn't work.
I tried Tomcat 6/7, JBoss AS 4.2.2/4.2.3/5.0.1/5.1.0 (I know, they are just
using Tomcat, but I gave it a shot anyway...).
The .war deploys right I guess. But as soon as I try to run the test.jsp, I
get a lot of errors.
The log below is from Tomcat 6,...
31.01.2011 10:51:00 org.apache.catalina.core.AprLifecycleListener init
INFO: The APR based Apache Tomcat Native library which allows optimal
performance in production environments was not found on the
java.library.path:
C:\Programme\Java\jdk1.6.0_22\bin;.;C:\WINDOWS\Sun\Java\bin;C:\WINDOWS\system32;C:\WINDOWS;C:/Programme/Java/jre6/bin/client;C:/Programme/Java/jre6/bin;C:/Programme/Java/jre6/lib/i386;C:\Programme\ActiveState
Komodo Edit 6\;C:\Programme\Mendeley
Desktop\wordPlugin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;%JAVA_HOME%\bin;C:\Programme\QuickTime\QTSystem\;C:\derby\bin
31.01.2011 10:51:00 org.apache.tomcat.util.digester.SetPropertiesRule begin
WARNUNG: [SetPropertiesRule]{Server/Service/Engine/Host/Context} Setting
property 'source' to 'org.eclipse.jst.jee.server:drools-5.1.1-server' did
not find a matching property.
31.01.2011 10:51:00 org.apache.coyote.AbstractProtocolHandler init
INFO: Initializing ProtocolHandler ["http-bio-8080"]
31.01.2011 10:51:00 org.apache.coyote.AbstractProtocolHandler init
INFO: Initializing ProtocolHandler ["ajp-bio-8009"]
31.01.2011 10:51:00 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 616 ms
31.01.2011 10:51:00 org.apache.catalina.core.StandardService startInternal
INFO: Starting service Catalina
31.01.2011 10:51:00 org.apache.catalina.core.StandardEngine startInternal
INFO: Starting Servlet Engine: Apache Tomcat/7.0.6
31.01.2011 10:51:01 org.apache.catalina.loader.WebappClassLoader
validateJarFile
INFO: validateJarFile(C:\Dokumente und Einstellungen\o.roess\Eigene
Dateien\Drools Server
Workspace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\drools-5.1.1-server\WEB-INF\lib\servlet-api-2.3.jar)
- jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class:
javax/servlet/Servlet.class
31.01.2011 10:51:11 org.apache.catalina.core.ApplicationContext log
INFO: Initializing Spring root WebApplicationContext
log4j:WARN No appenders could be found for logger
(org.springframework.web.context.ContextLoader).
log4j:WARN Please initialize the log4j system properly.
31.01.2011 10:51:18 org.apache.cxf.endpoint.ServerImpl initDestination
INFO: Setting the server's publish address to be /kservice/rest
31.01.2011 10:51:18 org.apache.cxf.transport.servlet.CXFServlet
updateContext
INFO: Load the bus with application context
31.01.2011 10:51:19 org.apache.cxf.transport.servlet.AbstractCXFServlet
replaceDestinationFactory
INFO: Servlet transport factory already registered
31.01.2011 10:51:19 org.apache.coyote.AbstractProtocolHandler start
INFO: Starting ProtocolHandler ["http-bio-8080"]
31.01.2011 10:51:19 org.apache.coyote.AbstractProtocolHandler start
INFO: Starting ProtocolHandler ["ajp-bio-8009"]
31.01.2011 10:51:19 org.apache.catalina.startup.Catalina start
INFO: Server startup in 18193 ms
Maybe there is already something wrong?
Ok then, this happens when I try to navigate to the test.jsp in my browser
31.01.2011 10:55:00 org.apache.cxf.phase.PhaseInterceptorChain
doDefaultLogging
WARNUNG: Interceptor for
{http://localhost:8080/drools-server-app/kservice/rest}WebClient has thrown
exception, unwinding now
org.apache.cxf.interceptor.Fault: Could not send Message.
at
org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:64)
at
org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:243)
at
org.apache.cxf.jaxrs.client.WebClient.doChainedInvocation(WebClient.java:615)
at
org.apache.cxf.jaxrs.client.WebClient.doInvoke(WebClient.java:596)
at org.apache.cxf.jaxrs.client.WebClient.invoke(WebClient.java:241)
at
org.apache.camel.component.cxf.jaxrs.CxfRsProducer.invokeHttpClient(CxfRsProducer.java:129)
at
org.apache.camel.component.cxf.jaxrs.CxfRsProducer.process(CxfRsProducer.java:71)
at
org.apache.camel.impl.converter.AsyncProcessorTypeConverter$ProcessorToAsyncProcessorBridge.process(AsyncProcessorTypeConverter.java:50)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.processor.SendProcessor$2.doInAsyncProducer(SendProcessor.java:104)
at
org.apache.camel.impl.ProducerCache.doInAsyncProducer(ProducerCache.java:272)
at
org.apache.camel.processor.SendProcessor.process(SendProcessor.java:98)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.processor.DelegateAsyncProcessor.processNext(DelegateAsyncProcessor.java:98)
at
org.apache.camel.processor.DelegateAsyncProcessor.process(DelegateAsyncProcessor.java:89)
at
org.apache.camel.processor.interceptor.TraceInterceptor.process(TraceInterceptor.java:99)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.processor.RedeliveryErrorHandler.processErrorHandler(RedeliveryErrorHandler.java:290)
at
org.apache.camel.processor.RedeliveryErrorHandler.process(RedeliveryErrorHandler.java:202)
at
org.apache.camel.processor.DefaultChannel.process(DefaultChannel.java:256)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at org.apache.camel.processor.Pipeline.process(Pipeline.java:143)
at org.apache.camel.processor.Pipeline.process(Pipeline.java:78)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.processor.DelegateAsyncProcessor.processNext(DelegateAsyncProcessor.java:98)
at
org.apache.camel.processor.DelegateAsyncProcessor.process(DelegateAsyncProcessor.java:89)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.processor.DelegateAsyncProcessor.processNext(DelegateAsyncProcessor.java:98)
at
org.apache.camel.processor.DelegateAsyncProcessor.process(DelegateAsyncProcessor.java:89)
at
org.apache.camel.processor.interceptor.TraceInterceptor.process(TraceInterceptor.java:99)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.processor.RedeliveryErrorHandler.processErrorHandler(RedeliveryErrorHandler.java:290)
at
org.apache.camel.processor.RedeliveryErrorHandler.process(RedeliveryErrorHandler.java:202)
at
org.apache.camel.processor.DefaultChannel.process(DefaultChannel.java:256)
at
org.apache.camel.processor.UnitOfWorkProcessor.process(UnitOfWorkProcessor.java:113)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.processor.DelegateAsyncProcessor.processNext(DelegateAsyncProcessor.java:98)
at
org.apache.camel.processor.DelegateAsyncProcessor.process(DelegateAsyncProcessor.java:89)
at
org.apache.camel.management.InstrumentationProcessor.process(InstrumentationProcessor.java:68)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:70)
at
org.apache.camel.component.direct.DirectProducer.process(DirectProducer.java:61)
at
org.apache.camel.processor.UnitOfWorkProcessor.process(UnitOfWorkProcessor.java:99)
at
org.apache.camel.util.AsyncProcessorHelper.process(AsyncProcessorHelper.java:91)
at
org.apache.camel.processor.DelegateAsyncProcessor.process(DelegateAsyncProcessor.java:85)
at
org.apache.camel.processor.UnitOfWorkProducer.process(UnitOfWorkProducer.java:63)
at
org.apache.camel.impl.ProducerCache$1.doInProducer(ProducerCache.java:333)
at
org.apache.camel.impl.ProducerCache$1.doInProducer(ProducerCache.java:304)
at
org.apache.camel.impl.ProducerCache.doInProducer(ProducerCache.java:208)
at
org.apache.camel.impl.ProducerCache.sendExchange(ProducerCache.java:303)
at org.apache.camel.impl.ProducerCache.send(ProducerCache.java:171)
at
org.apache.camel.impl.DefaultProducerTemplate.send(DefaultProducerTemplate.java:114)
at
org.apache.camel.impl.DefaultProducerTemplate.sendBody(DefaultProducerTemplate.java:118)
at
org.apache.camel.impl.DefaultProducerTemplate.sendBody(DefaultProducerTemplate.java:135)
at
org.apache.camel.impl.DefaultProducerTemplate.requestBody(DefaultProducerTemplate.java:283)
at
org.apache.camel.impl.DefaultProducerTemplate.requestBody(DefaultProducerTemplate.java:313)
at org.drools.server.Test.execute(Test.java:68)
at org.drools.server.Test.send(Test.java:60)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:77)
at
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:417)
at
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:391)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:306)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:240)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:161)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:164)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:100)
at
org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:550)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:380)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:243)
at
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:188)
at
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:166)
at
org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:288)
at
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.IOException: IOException invoking
http://localhost:8080/drools-server-app/kservice/rest/execute: HTTP response
'404: Not Found'
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at
org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.mapException(HTTPConduit.java:2058)
at
org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:2043)
at
org.apache.cxf.transport.AbstractConduit.close(AbstractConduit.java:66)
at
org.apache.cxf.transport.http.HTTPConduit.close(HTTPConduit.java:639)
at
org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:62)
... 79 more
Caused by: java.io.IOException: HTTP response '404: Not Found'
at
org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponseInternal(HTTPConduit.java:2194)
at
org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponse(HTTPConduit.java:2134)
at
org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:1988)
... 82 more
Anyone got an idea?
Thanks!
Kind regards
Oliver
--
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/Drools-Server-5-1-1-c...
Sent from the Drools - User mailing list archive at Nabble.com.
13 years
MVEL expression
by Femke De Backere
Hi,
The following expression keeps returning the error [112,32]: [ERR 103]
Line 112:32 no viable alternative at input '+' in rule "RuleFlow-Split-
masterproef.ruleflows.shortsedation-18-22" in pattern Patient:
Patient(sedation.ultiva+0.02 > 0.1)
with sedation.ultiva returning a double
What am I doing wrong?
Thx,
Femke
13 years
Re: [rules-users] Firing Mulitple packages
by Esteban Aliverti
Could you post the way you are using to add kassets to kbase?
El ago 13, 2010 12:20 p.m., "Vignesh" <viki.ccc(a)gmail.com> escribió:
Hi Esteban,
I have tried the same logic by adding all the packages in my application in
to the kbase and executed the same, but only the drl file got loaded in it,
other kassets like dsl, ruleflow present in it were not added to the same.
Do we need to add everything separetly?
Kindly let me know whether im missing something here.
Thanks,
Vignesh
--
View this message in context:
http://drools-java-rules-engine.46999.n3.nabble.com/Firing-Mulitple-packa...
Sent from the Drools - User mailing list archive at Nabble.com.
____________________________________...
13 years
Problem with DroolsFlow transaction
by HMandic
I have a problem with transaction manager in drools flow (at least I think
so).
I'm running an EJB3 application in Jboss AS 5.1.0GA with Postgres 8.4.4 as
database. I use one schema for my data and another for drools data. The
application itself is also split in two projects, one for my utility classes
that interact with drools and the other for my application that uses those
utility classes.
I'm using the same datasource and transaction type is JTA.
I have an object that holds a reference to processID from drools flow as one
of its fields. When I invoke my method to create that object (in a stateless
session bean), a transaction is opened and it lasts until the end of said
method. But somewhere inside that method I need to invoke
ksession.startProcess(processName, params) and then I get this:
java.lang.IllegalStateException: Wrong tx on thread: expected
TransactionImple < ac, BasicAction: -3f57ffd6:dfb:4c878d37:7e status:
ActionStatus.ABORTED >, actual null
at org.jboss.aspects.tx.TxPolicy.endTransaction(TxPolicy.java:157)
at org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:87)
at
org.jboss.aspects.tx.TxInterceptor$Required.invoke(TxInterceptor.java:190)
at
org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
at
org.jboss.aspects.tx.TxPropagationInterceptor.invoke(TxPropagationInterceptor.java:76)
at
org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
at org.jboss.ejb3.tx.NullInterceptor.invoke(NullInterceptor.java:42)
at
org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102)
.
.
.
Does that mean that I need to run the drools part in a separate thread?
I'm clueless...
--
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/Problem-with-DroolsFl...
Sent from the Drools - User mailing list archive at Nabble.com.
13 years, 1 month
Connection with Active Directory multiple organizational units
by G3
I am able to authenticate with Active Directory but with only a single
organizational unit but not with users of multiple organizational units
This is my organizational structure
+cn=test,cn=con
--+ou=Sample1
-----uid:user1,uid:user2
--+ou=Sample2
-----uid:user3,uid:user4
--+roles
-----admin:uid:user1,user3
-----user:uid:user2,user4
I have set the admin rights accordingly in Guvnor.
I am using Jboss Guvnor standalone 4.2.3 and I am trying to connect
multiple organizational units using JAAS
my login-config.xml
---------------------
<application-policy name="adConnection">
<authentication>
<login-module code="org.jboss.security.auth.spi.LdapExtLoginModule"
flag="required" >
<module-option
name="java.naming.provider.url">ldap://c.test.com:389/</module-option>
<module-option
name="java.naming.security.authentication">simple</module-option>
<module-option
name="bindDN">CN=Administrator,CN=Users,dc=test,dc=com</module-option>
<module-option name="bindCredential">password</module-option>
<module-option name="baseCtxDN">OU=Sample1,dc=test,dc=com</module-option>
<module-option name="baseFilter">(CN={0})</module-option>
<module-option name="rolesCtxDN">OU=roles,dc=test,dc=com</module-option>
<module-option name="uidAttributeID">member</module-option>
<module-option name="matchOnUserDN">true</module-option>
<module-option name="roleFilter">(member={1})</module-option>
<module-option name="roleAttributeID">CN</module-option>
<module-option name="roleRecursion">-1</module-option>
</login-module>
<login-module code="org.jboss.security.auth.spi.LdapExtLoginModule"
flag="required" >
<module-option
name="java.naming.provider.url">ldap://c.test.com:389/</module-option>
<module-option
name="java.naming.security.authentication">simple</module-option>
<module-option
name="bindDN">CN=Administrator,CN=Users,dc=test,dc=com</module-option>
<module-option name="bindCredential">password</module-option>
<module-option name="baseCtxDN">OU=Sample2,dc=test,dc=com</module-option>
<module-option name="baseFilter">(CN={0})</module-option>
<module-option name="rolesCtxDN">OU=roles,dc=test,dc=com</module-option>
<module-option name="uidAttributeID">member</module-option>
<module-option name="matchOnUserDN">true</module-option>
<module-option name="roleFilter">(member={1})</module-option>
<module-option name="roleAttributeID">CN</module-option>
<module-option name="roleRecursion">-1</module-option>
</login-module>
</authentication>
</application-policy>
and my component.xml
-------------------------
<security:identity authenticate-method="#{authenticator.authenticate}"
jaas-config-name="adConnection"/>
I donot get any errors in server console during deployment but when login
,I cannot login into Guvnor and I get password or user name incorrect.Can
some one help me out
--
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/Connection-with-Activ...
Sent from the Drools - User mailing list archive at Nabble.com.
13 years, 1 month
Drools 5 PseudoClock with StatelessKnowledgeSession
by Ben Scott
_______________________________________________________________________________________
Note: This e-mail is subject to the disclaimer contained at the bottom of this message.
_______________________________________________________________________________________
I'm wanting to use the date-effective and date-expiry rule metadata to add date specific rule variants within my app. To test these I was planning on using the pseudo clock and setting the expected date prior to executing the rules within a StatelessKnowledgeSession. I can set the clock easily enough, but can't understand why the getSessionClock() method is missing? It's on the StatefulKnowledgeSession, but not on the Stateless.
I'm initialising the session like this:
SessionConfiguration sessionConfiguration = new SessionConfiguration();
sessionConfiguration.setClockType( ClockType.PSEUDO_CLOCK );
StatelessKnowledgeSession session = _testKnowledgeBase.newStatelessKnowledgeSession(sessionConfiguration);
The only thing I could think of to set the pseudo clock was to write a command something like:
private static class SetPseudoClockCommand implements org.drools.process.command.Command<Boolean> {
public Boolean execute(ReteooWorkingMemory session) {
// Set the clock to the current date
pseudoSessionClock.advanceTime(new DateTime().getMillis(), TimeUnit.MILLISECONDS);
// Add a couple of days
pseudoSessionClock.advanceTime(2, TimeUnit.DAYS);
return true;
}
}
But this doesn't appear to take any effect whilst rules are running.
Is there another way to get programmatic access to the session clock, or some better way of changing the underlying date prior to rule execution?
Ben.
_______________________________________________________________________________________
The information transmitted in this message and its attachments (if any) is intended
only for the person or entity to which it is addressed.
The message may contain confidential and/or privileged material. Any review,
retransmission, dissemination or other use of, or taking of any action in reliance
upon this information, by persons or entities other than the intended recipient is
prohibited.
If you have received this in error, please contact the sender and delete this e-mail
and associated material from any computer.
The intended recipient of this e-mail may only use, reproduce, disclose or distribute
the information contained in this e-mail and any attached files, with the permission
of the sender.
This message has been scanned for viruses with Symantec Scan Engine and cleared by
MailMarshal.
_______________________________________________________________________________________
13 years, 2 months
