drools-solver results question
by Andrew Waterman
Hello,
I'm starting to work with the drools-solver to help on a gaming
project. Basically, we have a game that works in two modes: 1) a
competitive game where humans (or agents) compete with one another on
a well defined game board to achieve 24 points by using three (or
four) agricultural development tokens. 2. A puzzle, where all 4
players work cooperatively to create an equitable solution, where all
4 players win with at least 24 points by means of our agricultural
development tokens.
I am starting to work with drools-solver to address the puzzle part of
our game. Basically, we are interested in having the solver do two
things for us: a) find the optimal solution for our game/puzzle,
based upon our requirements [this part seems quite straightforward]
and b) getting the total number of solutions that satisfy our
constraints. We would like, as well, to be able to inspect these
other, sub-optimal, solutions, in order to explore our game and puzzle
further. From my reading of the "Solver" API , it looks like we will
only be able to get the optimal solution. Does anyone have any
suggestions for a workaround in this case? Or is there some
functionality in the solver that I am missing?
I look forward to your feedback.
best wishes,
Andrew
---------------------------------
Andrew Waterman
San Cristóbal de las Casas, Chiapas, Mexico
1 week, 5 days
Need help with setFocus
by new2drools
Hi All,
Need some help with understanding setFocus.
I have the following use case:
if (condition1) {
if (condition2) {
} else if (condition3) {
} else if (condition 4) {
}
}
if (condition5) {
if (condition2) {
} else if (condition3) {
} else if (condition 4) {
}
}
I created 3 rules (rule2, rule3, rule4) for checking condition2, condition3,
condition4 and
created 1 agenda group (groupX) for them.
I created 2 rules (rule1, rule5) for checking condition1, condition5 and
created 1 agenda group(groupY) for them.
rule "rule1"
agenda-group "groupY"
when
//
then
drools.setFocus("groupX");
end
rule "rule3"
agenda-group "groupX"
activation-group "someActiveGroup"
when
//
then
//
end
>From the java code:
ksession.getAgenda().getAgendaGroup("groupY").setFocus();
Problem: The first time, drools.setFocus("groupX") is invoked, I see that
it's working fine. rule2 or rule3 or rule4 get triggered. But, the SECOND
time that drools.setFocus("groupX") is invoked, I don't see that any rule in
agenda-group groupX is being invoked...even though one of the rule's LHS
explicitly matches...thinking that the activation-group is cancelling all
the activation's (after one rule in that activation group is fired), I even
removed the activation-group statement. But, it didn't help...ideally, I
would like to bunch rule2, rule3, rule4 in one activation group.
Can you please let me know as to why the second invocation of setFocus is
not working? I even tried to remove everything in LHS of rule2/3/4, to see
if the second invocation would work...it doesn't...
Thanks!!
--
View this message in context: http://www.nabble.com/Need-help-with-setFocus-tp24177742p24177742.html
Sent from the drools - user mailing list archive at Nabble.com.
1 month
conways game of life
by Mark Proctor
For anyone looking for a good and complex example on how to write rules
properly, please look at Conways Game of Life in drools-examples, for
extra bonus points compare it to the old version in M1. You'll see
nearly all the logic is moved from java to the drl and we have removed
the need for nested objects by using objects relaitionally, which also
allows us to exploit cross products to drive the application.
Mark
4 months, 3 weeks
named query TasksAssignedAsPotentialOwner doesn't work with MySql db
by Frank Knoll
Hi,
When I add a task (having two potential owners) by calling the method
addTask followed by calling the method getTasksAssignedAsPotentialOwner of
org.jbpm.task.service.TaskClient I expect to receive a list of TaskSummaries
containing at least the previously added task. But I actually get an empty
list!
Here is my setup and possible solution:
I am using the trunk version of
./jbpm-human-task/src/main/resources/META-INF/orm.xml and a MYSQL database.
When calling addTask the Task table will be populated with a NULL
actualOwner_id.
The named query TasksAssignedAsPotentialOwner
"select new org.jbpm.task.query.TaskSummary(...t.taskData.actualOwner...)
from ... left join t.taskData.actualOwner ..." of orm.xml generates SQL
consisting of an inner join "inner join OrganizationalEntity user7_ on
task0_.actualOwner_id=user7_.id" which doesn't take the NULL actualOwner_id
correctly into account.
When I replace the named query TasksAssignedAsPotentialOwner with
"select new org.jbpm.task.query.TaskSummary(...actualOwner...) from ...left
join t.taskData.actualOwner as actualOwner ...", then the generated SQL
consists of an "left outer join OrganizationalEntity user2_ on
task0_.actualOwner_id=user2_.id" which takes the NULL actualOwner_id
correctly into account. So I get a List of TaskSummaries containing the
added task.
Is this a correct fix?
Cheers, Frank
--
View this message in context: http://drools.46999.n3.nabble.com/named-query-TasksAssignedAsPotentialOwn...
Sent from the Drools: User forum mailing list archive at Nabble.com.
11 years, 11 months
Error Inserting events into drools fusion stream
by Ayush
Hi All,
I'm trying to implement drools fusion into my app. The scenario of my app is
as follows:
- Facts will be received continuosly.
- On receving fact I'm generating a new event and adding it into a new
working memory entry point stream. Also I'm adding facts into session coz
I'll be updating them.
- I need to apply rules on continuous stream of events.
- I've not used any camel + spring or pipeline. Are these mandatory to use?
For 1st fact everything works fine but when I receive 2nd fact I'm getting
Now when I'm trying to get entry point on receive of 2nd alarm I'm getting
org.drools.RuntimeDroolsException: Unexpected exception executing action
org.drools.reteoo.PropagationQueuingNode$PropagateAction@9ff411 Caused by:
java.util.concurrent.RejectedExecutionException.
On debug I found that the above exception is coming when I'm calling
session.getWorkingMemoryEntryPoint("MyStream"); Can anyone please help me
that how should I insert facts and events into working memory?
I'd invested ample amount of time searching for this but I'm empty handed.
Guys please help this is very urgent for me. Thanks in anticipation
--
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/Error-Inserting-event...
Sent from the Drools - User mailing list archive at Nabble.com.
12 years
Date equal comparison fails - don't understand why
by Saloojee, Karim
Hi
I am comparing SimpleAccount( dateAccountOpened == "5-Feb-2011")
where dateAccountOpened is "Sat Feb 05 00:00:00 GMT+02:00 2011" (if you
call toString()). The equal comparator fails (==) but the greater than
comparator passes (>) which I don't understand.
I feel I am missing something obvious here, but I have no idea what it
is.
rule "Test date equality"
when
$acc : SimpleAccount( dateAccountOpened == "5-Feb-2011")
then
System.out.println("Expected and found an account opened
on 5-Feb-2011: " + $acc);
end
rule "Some dates are more equal than others"
when
$acc : SimpleAccount( dateAccountOpened > "5-Feb-2011")
then
System.out.println("Unexpected match: " +
$acc.getDateAccountOpened());
end
Regards,
Karim
To read FirstRand Bank's Disclaimer for this email click on the following address or copy into your Internet browser:
https://www.fnb.co.za/disclaimer.html
If you are unable to access the Disclaimer, send a blank e-mail to
firstrandbankdisclaimer(a)fnb.co.za and we will send you a copy of the Disclaimer.
12 years, 3 months
Drools server and knowledge agent functionality
by Manuel Ortiz
Hello everybody:
I am taking a look at Drools Integration documentation to understand how
Drools server works and how can be used, and have a doubt concerning, let's
say... 'KnowledgeAgent capabilities'. Does Drools server support on the fly
rule updating as when using KnowledgeAgent to create KnowledgeBase objects?
If it does, where can be configured 'KnowledgeAgent related' properties such
as newInstance or resource scanner interval?
Thank you in advance for your time.
Kind regards,
Manuel Ortiz.
12 years, 4 months
Question about custom accumulation functions
by Bruno Freudensprung
Hi,
While testing my custom accumulation function I noticed an unexpected
behavior (th'ats of course a personal point of view).
It seems that Drools 5.1 calls accumulate(...) and getResult(...) as
many times as the number of accumulated facts (accumulate, getResult,
accumulate, getResult, etc...).
Is it supposed to work like this?
Best regards,
Bruno.
12 years, 4 months
Dependency enumeration
by agarwalk
Hi
I have created following enumeration and java class file.
*Enumeration:*
'OrderData.propertyState':(new com.asps.rules.OrderData()).loadStates()
'OrderData.fulfillmentReviewerName[propertyState]':'(new
com.asps.rules.OrderData()).loadReviewers("@{propertyState}")'
*Java class:*
public class OrderData implements Serializable {
private String propertyState;
private String fulfillmentReviewerName;
// getters and setters
public List<String> loadStates() {
List<String> states = new ArrayList<String>();
states.add("CA");
states.add("NY");
states.add("FL");
return states;
}
public List<String> loadReviewers(final String propertyState) {
List<String> reviewers = new ArrayList<String>();
System.out.println("### in load reviewers ### : " + propertyState);
if ("CA".equalsIgnoreCase(propertyState)) {
reviewers.add("A");
reviewers.add("B");
System.out.println("Reviewers : A & B");
} else if ("NY".equalsIgnoreCase(propertyState)) {
reviewers.add("C");
reviewers.add("D");
System.out.println("Reviewers : C& D");
} else if ("FL".equalsIgnoreCase(propertyState)) {
reviewers.add("E");
reviewers.add("F");
System.out.println("Reviewers : E& F");
} else {
reviewers.add("G");
reviewers.add("H");
System.out.println("Reviewers : G& H");
}
return reviewers;
}
}
I created a rule as follows
WHEN
There is an OrderData with:
propertyState[propertyState]* FL* --- This is a drop down which
is being displayed correctly
fulfillmentReviewerName [fulfillmentReviewerName] -- This should
have been the drop down. Values are dependent on the state selected.
When i try to create above rule the enumeration is loaded correctly for
propertyState but the enumeration is not loaded for fulfillmentReviewerName
field. When I saw the logs the correct method and condition is being
invoked (as per Sys out)but drop down does not contain anything.
ANy suggestions?
--
View this message in context: http://drools.46999.n3.nabble.com/Dependency-enumeration-tp3245703p324570...
Sent from the Drools: User forum mailing list archive at Nabble.com.
12 years, 5 months
