[JBoss JIRA] (DROOLS-2301) Decision Table editor
by Jozef Marko (JIRA)
[ https://issues.jboss.org/browse/DROOLS-2301?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2301:
--------------------------------
Description:
h1. Refactoring for "Decision Table" editor
h2. Acceptance criteria:
# Set table orientation (/)
## This should not be affected by the change of hit policy or table data
# Change hit policy (/)
## Change should be visible in most left upper cell
## If {{COLLECT <function>}} was selected, then hit policy changed and then again {{COLLECT}} selected, then {{<function>}} should be same as previously
# Clear decision table context entry clicking to any cell
# Add rule
## Above
### Clicking to existing row number
### Clicking to existing cell
## Below
### Clicking to existing row number
### Clicking to existing cell
# Add input
## Before
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
## After
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
# Add output
## Before
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
## After
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
# Remove
## Input
## Output
## Rule
# Output clauses should be collapsed to one name
# Reorder
## Inputs separately
## Outputs separately
## inputs with outputs and vice versa shouldn't be allowed
## Description column should be prevented
## Rows of table
# Change column width
## Input
## Output
## Description
# Rename any input clause
# Rename any output clause
# Undo or Redo anything from this list
# Save and reopen in any moment
# Use table as not most upper left context entry of decision
was:
h1. Refactoring for "Decision Table" editor
h2. Acceptance criteria:
# Set table orientation (/)
## This should not be affected by the change of hit policy or table data
# Change hit policy
## Change should be visible in most left upper cell
## If {{COLLECT <function>}} was selected, then hit policy changed and then again {{COLLECT}} selected, then {{<function>}} should be same as previously
# Clear decision table context entry clicking to any cell
# Add rule
## Above
### Clicking to existing row number
### Clicking to existing cell
## Below
### Clicking to existing row number
### Clicking to existing cell
# Add input
## Before
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
## After
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
# Add output
## Before
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
## After
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
# Remove
## Input
## Output
## Rule
# Output clauses should be collapsed to one name
# Reorder
## Inputs separately
## Outputs separately
## inputs with outputs and vice versa shouldn't be allowed
## Description column should be prevented
## Rows of table
# Change column width
## Input
## Output
## Description
# Rename any input clause
# Rename any output clause
# Undo or Redo anything from this list
# Save and reopen in any moment
# Use table as not most upper left context entry of decision
> Decision Table editor
> ---------------------
>
> Key: DROOLS-2301
> URL: https://issues.jboss.org/browse/DROOLS-2301
> Project: Drools
> Issue Type: Sub-task
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Michael Anstis
>
> h1. Refactoring for "Decision Table" editor
> h2. Acceptance criteria:
> # Set table orientation (/)
> ## This should not be affected by the change of hit policy or table data
> # Change hit policy (/)
> ## Change should be visible in most left upper cell
> ## If {{COLLECT <function>}} was selected, then hit policy changed and then again {{COLLECT}} selected, then {{<function>}} should be same as previously
> # Clear decision table context entry clicking to any cell
> # Add rule
> ## Above
> ### Clicking to existing row number
> ### Clicking to existing cell
> ## Below
> ### Clicking to existing row number
> ### Clicking to existing cell
> # Add input
> ## Before
> ### Clicking to existing input
> ### Clicking to existing output shouldn't allow to add input
> ## After
> ### Clicking to existing input
> ### Clicking to existing output shouldn't allow to add input
> # Add output
> ## Before
> ### Clicking to existing output
> ### Clicking to existing input shouldn't allow to add output
> ## After
> ### Clicking to existing output
> ### Clicking to existing input shouldn't allow to add output
> # Remove
> ## Input
> ## Output
> ## Rule
> # Output clauses should be collapsed to one name
> # Reorder
> ## Inputs separately
> ## Outputs separately
> ## inputs with outputs and vice versa shouldn't be allowed
> ## Description column should be prevented
> ## Rows of table
> # Change column width
> ## Input
> ## Output
> ## Description
> # Rename any input clause
> # Rename any output clause
> # Undo or Redo anything from this list
> # Save and reopen in any moment
> # Use table as not most upper left context entry of decision
--
This message was sent by Atlassian JIRA
(v7.5.0#75005)
8 years, 2 months
[JBoss JIRA] (DROOLS-2301) Decision Table editor
by Jozef Marko (JIRA)
[ https://issues.jboss.org/browse/DROOLS-2301?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2301:
--------------------------------
Description:
h1. Refactoring for "Decision Table" editor
h2. Acceptance criteria:
# Set table orientation (/)
## This should not be affected by the change of hit policy or table data
# Change hit policy
## Change should be visible in most left upper cell
## If {{COLLECT <function>}} was selected, then hit policy changed and then again {{COLLECT}} selected, then {{<function>}} should be same as previously
# Clear decision table context entry clicking to any cell
# Add rule
## Above
### Clicking to existing row number
### Clicking to existing cell
## Below
### Clicking to existing row number
### Clicking to existing cell
# Add input
## Before
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
## After
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
# Add output
## Before
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
## After
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
# Remove
## Input
## Output
## Rule
# Output clauses should be collapsed to one name
# Reorder
## Inputs separately
## Outputs separately
## inputs with outputs and vice versa shouldn't be allowed
## Description column should be prevented
## Rows of table
# Change column width
## Input
## Output
## Description
# Rename any input clause
# Rename any output clause
# Undo or Redo anything from this list
# Save and reopen in any moment
# Use table as not most upper left context entry of decision
was:
h1. Refactoring for "Decision Table" editor
h2. Acceptance criteria:
# Set table orientation
## This should not be affected by the change of hit policy or table data
# Change hit policy
## Change should be visible in most left upper cell
## If {{COLLECT <function>}} was selected, then hit policy changed and then again {{COLLECT}} selected, then {{<function>}} should be same as previously
# Clear decision table context entry clicking to any cell
# Add rule
## Above
### Clicking to existing row number
### Clicking to existing cell
## Below
### Clicking to existing row number
### Clicking to existing cell
# Add input
## Before
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
## After
### Clicking to existing input
### Clicking to existing output shouldn't allow to add input
# Add output
## Before
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
## After
### Clicking to existing output
### Clicking to existing input shouldn't allow to add output
# Remove
## Input
## Output
## Rule
# Output clauses should be collapsed to one name
# Reorder
## Inputs separately
## Outputs separately
## inputs with outputs and vice versa shouldn't be allowed
## Description column should be prevented
## Rows of table
# Change column width
## Input
## Output
## Description
# Rename any input clause
# Rename any output clause
# Undo or Redo anything from this list
# Save and reopen in any moment
# Use table as not most upper left context entry of decision
> Decision Table editor
> ---------------------
>
> Key: DROOLS-2301
> URL: https://issues.jboss.org/browse/DROOLS-2301
> Project: Drools
> Issue Type: Sub-task
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Michael Anstis
>
> h1. Refactoring for "Decision Table" editor
> h2. Acceptance criteria:
> # Set table orientation (/)
> ## This should not be affected by the change of hit policy or table data
> # Change hit policy
> ## Change should be visible in most left upper cell
> ## If {{COLLECT <function>}} was selected, then hit policy changed and then again {{COLLECT}} selected, then {{<function>}} should be same as previously
> # Clear decision table context entry clicking to any cell
> # Add rule
> ## Above
> ### Clicking to existing row number
> ### Clicking to existing cell
> ## Below
> ### Clicking to existing row number
> ### Clicking to existing cell
> # Add input
> ## Before
> ### Clicking to existing input
> ### Clicking to existing output shouldn't allow to add input
> ## After
> ### Clicking to existing input
> ### Clicking to existing output shouldn't allow to add input
> # Add output
> ## Before
> ### Clicking to existing output
> ### Clicking to existing input shouldn't allow to add output
> ## After
> ### Clicking to existing output
> ### Clicking to existing input shouldn't allow to add output
> # Remove
> ## Input
> ## Output
> ## Rule
> # Output clauses should be collapsed to one name
> # Reorder
> ## Inputs separately
> ## Outputs separately
> ## inputs with outputs and vice versa shouldn't be allowed
> ## Description column should be prevented
> ## Rows of table
> # Change column width
> ## Input
> ## Output
> ## Description
> # Rename any input clause
> # Rename any output clause
> # Undo or Redo anything from this list
> # Save and reopen in any moment
> # Use table as not most upper left context entry of decision
--
This message was sent by Atlassian JIRA
(v7.5.0#75005)
8 years, 2 months
[JBoss JIRA] (DROOLS-2301) Decision Table editor
by Jozef Marko (JIRA)
[ https://issues.jboss.org/browse/DROOLS-2301?page=com.atlassian.jira.plugi... ]
Jozef Marko updated DROOLS-2301:
--------------------------------
QE Status: ASSIGNED (was: NEW)
> Decision Table editor
> ---------------------
>
> Key: DROOLS-2301
> URL: https://issues.jboss.org/browse/DROOLS-2301
> Project: Drools
> Issue Type: Sub-task
> Components: DMN Editor
> Reporter: Michael Anstis
> Assignee: Michael Anstis
>
> h1. Refactoring for "Decision Table" editor
> h2. Acceptance criteria:
> # Set table orientation
> ## This should not be affected by the change of hit policy or table data
> # Change hit policy
> ## Change should be visible in most left upper cell
> ## If {{COLLECT <function>}} was selected, then hit policy changed and then again {{COLLECT}} selected, then {{<function>}} should be same as previously
> # Clear decision table context entry clicking to any cell
> # Add rule
> ## Above
> ### Clicking to existing row number
> ### Clicking to existing cell
> ## Below
> ### Clicking to existing row number
> ### Clicking to existing cell
> # Add input
> ## Before
> ### Clicking to existing input
> ### Clicking to existing output shouldn't allow to add input
> ## After
> ### Clicking to existing input
> ### Clicking to existing output shouldn't allow to add input
> # Add output
> ## Before
> ### Clicking to existing output
> ### Clicking to existing input shouldn't allow to add output
> ## After
> ### Clicking to existing output
> ### Clicking to existing input shouldn't allow to add output
> # Remove
> ## Input
> ## Output
> ## Rule
> # Output clauses should be collapsed to one name
> # Reorder
> ## Inputs separately
> ## Outputs separately
> ## inputs with outputs and vice versa shouldn't be allowed
> ## Description column should be prevented
> ## Rows of table
> # Change column width
> ## Input
> ## Output
> ## Description
> # Rename any input clause
> # Rename any output clause
> # Undo or Redo anything from this list
> # Save and reopen in any moment
> # Use table as not most upper left context entry of decision
--
This message was sent by Atlassian JIRA
(v7.5.0#75005)
8 years, 2 months
[JBoss JIRA] (WFLY-10037) QS Ejb-security-jaas admin authorisation exception
by Jozef Cibik (JIRA)
[ https://issues.jboss.org/browse/WFLY-10037?page=com.atlassian.jira.plugin... ]
Jozef Cibik updated WFLY-10037:
-------------------------------
Description:
The user authenticated in client/servlet doesn't have admin authorisation, therefore server throws a stacktrace in server logs when executing "mvn exec:exec" or accessing QS URL.
Readme should mention this exception in server log.
was:
The user authenticated in client/servlet doesn't have admin authorisation, therefore server throws a stacktrace in server logs when executing "mvn exec:exec" or accessing QS URL.
> QS Ejb-security-jaas admin authorisation exception
> --------------------------------------------------
>
> Key: WFLY-10037
> URL: https://issues.jboss.org/browse/WFLY-10037
> Project: WildFly
> Issue Type: Bug
> Components: Quickstarts
> Reporter: Jozef Cibik
> Assignee: Tomaz Cerar
>
> The user authenticated in client/servlet doesn't have admin authorisation, therefore server throws a stacktrace in server logs when executing "mvn exec:exec" or accessing QS URL.
> Readme should mention this exception in server log.
--
This message was sent by Atlassian JIRA
(v7.5.0#75005)
8 years, 2 months
[JBoss JIRA] (WFLY-10037) QS Ejb-security-jaas admin authorisation exception
by Jozef Cibik (JIRA)
Jozef Cibik created WFLY-10037:
----------------------------------
Summary: QS Ejb-security-jaas admin authorisation exception
Key: WFLY-10037
URL: https://issues.jboss.org/browse/WFLY-10037
Project: WildFly
Issue Type: Bug
Components: Quickstarts
Reporter: Jozef Cibik
Assignee: Tomaz Cerar
The user authenticated in client/servlet doesn't have admin authorisation, therefore server throws a stacktrace in server logs when executing "mvn exec:exec" or accessing QS URL.
--
This message was sent by Atlassian JIRA
(v7.5.0#75005)
8 years, 2 months