4:51 p.m.
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public (Everyone can see)
Reporter: Paul Robinson
Assignee: Amos Feng
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script.
By using Arquillian we should be able to remove the ant script and servlet then have
Arquillian deploy the services and run the tests directly in the container.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:55 p.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Paul Robinson updated JBTM-954:
-------------------------------
Description:
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for each
servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
was:
Currently the XTS unit tests deploy a servlet that is invoked by an ant script.
By using Arquillian we should be able to remove the ant script and servlet then have
Arquillian deploy the services and run the tests directly in the container.
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Reporter: Paul Robinson
Assignee: Amos Feng
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:31 a.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Amos Feng resolved JBTM-954.
----------------------------
Resolution: Done
convert all tests to use arquillian and ensure them working with jboss-as-7.1.0.Beta1b
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Reporter: Paul Robinson
Assignee: Amos Feng
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:49 p.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Paul Robinson reassigned JBTM-954:
----------------------------------
Assignee: Paul Robinson (was: Amos Feng)
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Reporter: Paul Robinson
Assignee: Paul Robinson
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:51 p.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Paul Robinson reopened JBTM-954:
--------------------------------
Tests need moving into the relevant individual sub-projects. Also need to remove the old
tests.
Probably best to do this during the XTS re-structuring.
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Reporter: Paul Robinson
Assignee: Paul Robinson
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:33 p.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Tom Jenkinson updated JBTM-954:
-------------------------------
Component/s: XTS
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Components: XTS
Reporter: Paul Robinson
Assignee: Paul Robinson
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:38 p.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Tom Jenkinson resolved JBTM-954.
--------------------------------
Resolution: Done
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Components: XTS
Reporter: Paul Robinson
Assignee: Paul Robinson
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:21 a.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Tom Jenkinson updated JBTM-954:
-------------------------------
Component/s: Testing
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Components: Testing, XTS
Reporter: Paul Robinson
Assignee: Paul Robinson
Fix For: 5.0.0.M2
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:21 a.m.
[
https://issues.jboss.org/browse/JBTM-954?page=com.atlassian.jira.plugin.s...
]
Tom Jenkinson updated JBTM-954:
-------------------------------
Fix Version/s: 4.17.0
(was: 5.0.0.M2)
Update the XTS unit tests to use Arquillian
-------------------------------------------
Key: JBTM-954
URL: https://issues.jboss.org/browse/JBTM-954
Project: JBoss Transaction Manager
Issue Type: Task
Security Level: Public(Everyone can see)
Components: Testing, XTS
Reporter: Paul Robinson
Assignee: Paul Robinson
Fix For: 4.17.0
Currently the XTS unit tests deploy a servlet that is invoked by an ant script. By using
Arquillian we should be able to remove the ant script and servlet then have Arquillian
deploy the services and run the tests directly in the container.
Currently these are the steps that are ran:
# Deploy the tests to the AS
# Run XTS/localjunit/run-tests.xml which in turn invokes
com.arjuna.qa.junit.LocalJUnitRunner for each group of tests.
# com.arjuna.qa.junit.LocalJUnitRunner invokes the
com.arjuna.qa.junit.TestRunnerXMLServlet Servlet.
# TestRunnerXMLServlet then invokes a testsuite, for example:
com.arjuna.wst11.tests.junit.TestSuite for the ws-t11 tests
# for example, com.arjuna.wst11.tests.junit.TestSuite comprises a number of JUnit tests
whose results are returned as an XML response to the TestRunnerXMLServlet
# LocalJUnitRunner writes the response of the TestRunnerXMLServlet to the file system and
registers a test failure if any of the tests failed.
There is a lot of code to run the tests. This could all be replaced by using Arquillian.
The motivation here is less code to maintain and the ability to run tests directly from
any ant runner.
I think the process we should follow is as follows:
# Figure out which tests are currently ran, I suspect it's only the WS-TX v1.1 tests
that are ran, as I think the WS-TX 1.0 support is no longer needed. This can be done by
tracing through from XTS/localjunit/run-tests.xml to see which servlets are invoked.
## Each servlet is configured to run a test suite. Each test suite lists a number of test
classes.
## Report back to this issue stating which tests are ran. Can you produce a table for
each servlet?
# Take one test class and convert that to Arquillian. You should just need to define an
@Deployment method on the class and set the @RunWith.
## This test should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step should be to extend support the
remaining TestCases in the TestSuite. I think they will all share a common @Deployment
method, maybe you can use a base class.
## This suite should be runnable from your IDE using the regular ant runner
## Report back to this issue when you are this far to review the pattern.
# Providing the pattern looks good, the next step is to convert the remaining (used)
TestSuites to use Arquillian.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
4204
days inactive
4558
days old
jbossts-issues@lists.jboss.org
8 comments
6 participants
participants (6)
-
Amos Feng (Resolved) (JIRA) -
Paul Robinson (Assigned) (JIRA)
-
Paul Robinson (Created) (JIRA)
-
Paul Robinson (Reopened) (JIRA)
-
Paul Robinson (Updated) (JIRA)
-
Tom Jenkinson (JIRA)