Re: [rules-users] Error running Drools 5.0 HelloWorldExample on WebSphere 6.1
by Blythe, Marshall
A quick follow-up: this error occurs only when I have rules using the MVEL dialect. I rewrote the MVEL rule in the HelloWorld.drl to use the Java dialect, and now the problem is gone. I may need to raise this issue on the MVEL mailing list instead.
----------------------------------------- This e-mail and any attachments may contain CONFIDENTIAL information, including PROTECTED HEALTH INFORMATION. If you are not the intended recipient, any use or disclosure of this information is STRICTLY PROHIBITED; you are requested to delete this e-mail and any attachments, notify the sender immediately, and notify the LabCorp Privacy Officer at privacyofficer(a)labcorp.com or call (877) 23-HIPAA.
13 years, 11 months
Difference between Rule Base and Knowledge Base
by Swapnil Sawant
Hi,
I had a very basic doubt. 'Rule Base' and 'Knowledge Base' are two different concepts (may be from implementation point of view )?
I got this doubt when I was going through section '1.4.7.2. Drools execution server' of drools guvnor (v5.0) where it was written like :
The drools execution server (drools-server) module is a war which you can deploy to execute "knowledgebases (rulebases)" remotely for any sort of client application
The thing is that , I have created Knowledge base from changeset.xml as follows :
kagent = KnowledgeAgentFactory.newKnowledgeAgent( "MyRuleAgent" );
kagent.applyChangeSet( ResourceFactory.newUrlResource( changesetUrl ) );
kbase = kagent.getKnowledgeBase();
Now if I wish to get Rule Base corresponding to my changeset(or rather my DRL file) using 'this kbase object' , how can I do that ?
Thanks,
Swapnil Sawant
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
______________________________________________________________________
13 years, 11 months
ProcessEventListener event order
by Carlos Villegas
Hi,
I'm testing the ProcessEventListener on a simple process and I get the
"after" events in reverse order.
For example,
Process completed : 1283915643204
Node left: 5: 1283915643268
Node triggered: 5: 1283915643268
Node left: 4: 1283915643268
Node triggered: 4: 1283915643269
Node left: 3: 1283915643269
Node triggered: 3: 1283915643270
Node left: 2: 1283915643270
Node triggered: 2: 1283915643270
Node left: 1: 1283915643270
Node triggered: 1: 1283915643271
Node left: 0: 1283915643271
Node triggered: 0: 1283915643271
Process started : 1283915643271
I'm just printing the node id and the time in milliseconds.
Is this the way is supposed to be?
I guess technically "after" could be anytime after, but if I use the
afterProcessStarted event, I get it after the whole process has
completed!, which it's not useful at all.
The "before" events work as expected I think.
I'm using Drools Flow 5.1.0.
Thanks,
Carlos
13 years, 12 months
CPU Spike creating a StatefulKnowledgeSession using OSGi
by David Conde
Good Morning,
I now have drools running on the Spring DM-Server but I am seeing a CPU
spike when creating a StatefulKnowledgeSession. I've tested this outside of
an OSGi environment and I don't see the spike. Does anyone know any settings
that I can change that might make this go away?
Thanks,
Dave
--
David Conde
CTO Calom Technologies
14 years
Questions regarding Guvnor
by Harshit Bapna
Hello All,
Few questions:
1. What is the release date of Guvnor 5.2 ? (Couldn't find it from the site
of the documentation)
I am interested in the functionality to add the guvnor editors in
another app for rule editing. i.e. StandaloneEditorServlet
2. Which SVN TAG of the Guvnor (which has standalone editor functionality)
should I use ?
Note: On trunk I have observed that the war contains a folder *guvnor* where
as guvnor 5.1 war contained folder *org.drools.guvnor.Guvnor*
Also the web.xml in the trunk has the following url pattern <url-pattern>/*
org.drools.guvnor.Guvnor*/feed/*</url-pattern>
This url pattern would never be matched as the Guvnor.html is under
guvnor/Guvnor.html. To make it work I had to update the url patterns in the
web.xml
Is there anything that I am doing wrong ? (mvn clean install
-Dmaven.test.failure.ignore=true)
IMO, the trunk has partial changes checked in. Hence it is not stable.
Thanks
14 years
KnowledgeAgent and applyChangeSet
by bob.breitling
If I have a KnowledgeAgent and I create a URL Resource and set its
basicAuthenication, username and password attributes then I call the agents
applyChangeSet method I get a HTTPD 401 response from the Guvnor. It does
not happen to my resourse which has a valid username and password, but it
happens to the resource in the changeSet xml tag.
It would seem to me that the resources that are built from the resource I
passed would inherit the basicAuthenication, username and password
attributes that I set and know work, but they don't and I get this error.
If I debug the code and filling in those values on the resource passed to
the createPackageFromResource method before the resource stream is read the
code works.
I am using the NilAuthenicator in the Guvnor components.xml and that seems
to be working. I get access to the Guvnor without being asked for
credentials.
I tried to configure my jboss (4.2.0) in login-config.xml to allow access to
everything as guest. But no luck.
Any suggestions?
Bob
--
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/KnowledgeAgent-and-ap...
Sent from the Drools - User mailing list archive at Nabble.com.
14 years
OSGi version of Drools
by Flavius Vespasianus
Hello,
is there anywhere a OSGi bundle with Drools 4.0.7? I know about
com.springsource.org.drools.* but these had a lot of additional
dependencies and I wasn't able to get them work.
My problem is that I need to have three projects: one is the basic
library which uses Drools very intensively. The second project is editor
- an Eclipse plugin (that's why I need the OSGi bundle) using some
classes from the basic library. It doesn't use Drools, but there is a
dependency. The third project is classic Java application, also using
the basic library.
The basic library was originally created using standard Drools project
wizard (I have downloaded the Eclipse Drools plugin -
org.drools.eclipse). But when I tried to deploy it as an Eclipse plugin,
it couldn't find the Drools classes.
I found a little workaround - I have compiled the binaries (drools-core,
drools-compiler and from libs the mvel, antlr3 and eclipse-jdt-core)
into separate plugin using "Create a plugin from existing jars" wizard.
But if I add this dependency to the basic library, I get a
NullPointerException error on every dslr file and I cannot run the
application properly). At least the second project (editor) can be compiled.
What am I doing wrong? Or can I find somewhere the binaries compiled
correctly into OSGi bundle?
Thanks a lot!
Flavius
14 years
Drools Expert 5 OSGi
by jflamy
I want to manage Drools Expert rules with Drools Guvnor. My understanding is
that requires the use of Drools Expert version 5.
I also need to use an OSGi-packaged version of Drools Expert.
I saw a forum posting in 2010 alluding to such a beast, but the springsource
forums only provide 4.0.7.
Is there a ready-made OSGi bundle for drools expert 5, or alternately
specific instructions for building one ?
Jean-François Lamy
--
View this message in context: http://n3.nabble.com/Drools-Expert-5-OSGi-tp681546p681546.html
Sent from the Drools - User mailing list archive at Nabble.com.
14 years
MVEL expression
by Femke De Backere
Hi,
The following expression keeps returning the error [112,32]: [ERR 103]
Line 112:32 no viable alternative at input '+' in rule "RuleFlow-Split-
masterproef.ruleflows.shortsedation-18-22" in pattern Patient:
Patient(sedation.ultiva+0.02 > 0.1)
with sedation.ultiva returning a double
What am I doing wrong?
Thx,
Femke
14 years, 1 month
