9:59 a.m.
I would like to add more then one DSL file to a DSLR file. I understand that
semantically the knowledge base will allow this but is there away to allow
eclipse the ability to view the DRL when multiple DSLs are being used? I
found JBRULES-1615 but I am not sure if this was actually resolved or just
closed.
Thanks
-Mike
--
View this message in context:
http://drools.46999.n3.nabble.com/Multiple-DSL-files-with-Eclipse-IDE-tp4...
Sent from the Drools: User forum mailing list archive at Nabble.com.
10:22 a.m.
Coming from ILog JRule background, I start to use Drool 5.5 final version for
a new project and find this is still an issue for Eclipse drool plugin to
have multiple DSLs for one dslr. Not sure why JBRULES-1615 is closed. My
logical guess is that they closed from knowledge builder view, not eclipse
ide plugin view.
After seeing the source code and did a quick fix, it works perfectly for me.
Like to share my changes to contribute back this wonderful community since I
get a lot from this in early days.
Here assumes you use drools 5.5.0 final plugin, the other version should
work the same way
#1. backup eclipse-dir/plugins/org.drools.eclipse_5.5.0.Final.jar to
somewhere
#2. unjar eclipse/plugins/org.drools.eclipse_5.5.0.Final.jar to a work-dir
#3. replace the org.drools.eclipse.dsl.editor.DSLAdapter.class to the
following class in work-dir
#4. re-jar back to jar cvfm ../org.drools.eclipse_5.5.0.Final.jar
META-INF\MANIFEST.MF * in work-dir
#5. cp ../org.drools.eclipse_5.5.0.Final.jar from work-dir to
eclipse-dir/plugins/org.drools.eclipse_5.5.0.Final.jar
#6. start your eclipse, it should support multiple DSL files in eclipse IDE
Extra surprise is found that if you have multiple dslr files, instead of
each file has expander mydsl1.dsl; expander mydsl2.dsl; ... you can define
all dsl expander into package file, whose name doesn't matter, but the file
ext must be .package, e.g. "dsl.package"
/*
* Copyright 2010 JBoss Inc
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.drools.eclipse.dsl.editor;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.Reader;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
import org.drools.eclipse.DroolsEclipsePlugin;
import org.drools.eclipse.builder.Util;
import org.drools.eclipse.editors.completion.DSLTree;
import org.drools.lang.dsl.DSLMapping;
import org.drools.lang.dsl.DSLMappingEntry;
import org.drools.lang.dsl.DSLTokenizedMappingFile;
import org.eclipse.core.resources.IFile;
import org.eclipse.core.resources.IResource;
import org.eclipse.core.resources.IResourceVisitor;
import org.eclipse.core.runtime.CoreException;
/**
* This holds the DSL configuration for an editor instance.
* When loading, it will find the DSL file, and load the applicable lists.
*
* This provides a link between the editor and the DSL features of the rule
language.
*
* It will look for a DSL configuration, as named in the rule file, in the
same directory as the rule file.
* Failing this, it will search one directory above the rule file.
* Failing that, it will search the root of the project in the workspace.
*/
public class DSLAdapter {
private String dslConfigName;
private boolean valid = false;
private List conditionProposals = new ArrayList();
private List consequenceProposals = new ArrayList();
private DSLTree dslTree = new DSLTree();
//to dig out the expander, without using the parser.
private static final Pattern EXPANDER_PATTERN = Pattern.compile(
"\\n\\s*expander\\s*(.*)\\.dsl",
Pattern.DOTALL
| Pattern.MULTILINE );
// # george change #1 BGN - ADD
private static final Pattern SINGLE_LINE_EXPANDER_PATTERN =
Pattern.compile( "\\n\\s*expander\\s*(.*)\\.dsl" );
// # george change #1 END - ADD
/**
* This will sniff out the DSL config file name from the content.
* It will then use the IFile input to search around for the file
itself.
* TODO: provide an alternative that just loads off a stream (for non
IDEs workbenches like jlibrary).
* @param content Rule source
* @param input File from the FileEditorInput
*/
public DSLAdapter(String content, IFile input) throws CoreException {
dslConfigName = findDSLConfigName( content, input );
if (dslConfigName == null) {
return;
}
loadConfig( input );
}
/** Get a reader to the DSL contents */
public static Reader getDSLContent(String ruleSource, IResource input)
throws CoreException {
// # george change #2 BGN - CHANGE
String[] dslFileNames = findDSLConfigNames( ruleSource, input );
if (dslFileNames == null || dslFileNames.length == 0) {
return null;
}
if (dslFileNames.length == 1) {
IResource res = findDSLResource( input, dslFileNames[0] );
if (res instanceof IFile) {
IFile dslConf = (IFile) res;
if (dslConf.exists()) {
return new InputStreamReader(dslConf.getContents());
}
}
return null;
} else {
MultiReader ret = new MultiReader();
for (String dslFileName: dslFileNames) {
IResource res = findDSLResource( input, dslFileName );
if (res instanceof IFile) {
IFile dslConf = (IFile) res;
if (dslConf.exists()) {
ret.add( new InputStreamReader(dslConf.getContents()) );
}
}
}
return ret;
}
// # george change #2 END - CHANGE
}
/**
* This does the hunting around the projec to find the .dsl file.
*/
private void loadConfig(IFile input) {
IResource res = findDSLResource( input, dslConfigName );
if (res instanceof IFile) {
IFile dslConf = (IFile) res;
if (dslConf.exists()) {
InputStream stream = null;
try {
stream = dslConf.getContents();
readConfig( stream );
valid = true;
} catch ( Exception e ) {
throw new IllegalStateException("Unable to open DSL
config file. (Exception: " + e.getMessage() + ")");
} finally {
closeStream( stream );
}
}
}
}
private static IResource findDSLResource(IResource input, String
dslFileName) {
IResource res = input.getParent().findMember( dslFileName );
if (res == null) res = input.getParent().getParent().findMember(
dslFileName ); //try parent directory
if (res == null) res = input.getProject().findMember( dslFileName );
//try root of project.
return res;
}
/** This will load in the DSL config file, using the DSLMapping from
drools-compiler */
void readConfig(InputStream stream) throws IOException, CoreException {
DSLTokenizedMappingFile file = new DSLTokenizedMappingFile();
file.parseAndLoad(new InputStreamReader(stream));
DSLMapping grammar = file.getMapping();
List conditions = grammar.getEntries( DSLMappingEntry.CONDITION );
List consequences = grammar.getEntries( DSLMappingEntry.CONSEQUENCE
);
conditionProposals = buildProposals(conditions);
consequenceProposals = buildProposals(consequences);
dslTree.buildTree(grammar);
}
private List buildProposals(List suggestions) {
List result = new ArrayList(suggestions.size());
Iterator iterator = suggestions.iterator();
while (iterator.hasNext()) {
DSLMappingEntry text = (DSLMappingEntry) iterator.next();
result.add(text.getMappingKey());
}
return result;
}
private void closeStream(InputStream stream) {
if (stream != null) try {
stream.close();
} catch ( IOException e ) {}
}
DSLAdapter() {
}
private static String findDSLConfigName(String content, IResource input)
throws CoreException {
String dslConfigName = findDSLConfigName( content );
if (dslConfigName == null) {
// try searching the .package file
if (input != null && input.getParent() != null) {
MyResourceVisitor visitor = new MyResourceVisitor();
input.getParent().accept(visitor, IResource.DEPTH_ONE,
IResource.NONE);
IResource packageDef = visitor.getPackageDef();
if (packageDef != null) {
if (packageDef instanceof IFile) {
IFile file = (IFile) packageDef;
try {
String pContent = new
String(Util.getResourceContentsAsCharArray(file));
dslConfigName = findDSLConfigName( pContent );
} catch (CoreException e) {
DroolsEclipsePlugin.log(e);
}
}
}
}
}
return dslConfigName;
}
/** Sniffs out the expander/DSL config name as best it can. */
static String findDSLConfigName(String content) {
String name = null;
Matcher matches = EXPANDER_PATTERN.matcher( content );
if (matches.find()) {
name = matches.group(1) + ".dsl";
}
return name;
}
// # george change #3 BGN - ADD
private static String[] findDSLConfigNames(String content, IResource
input) throws CoreException {
String[] ret = findDSLConfigNames(content);
if (ret == null || ret.length == 0) {
// try searching the .package file
if (input != null && input.getParent() != null) {
MyResourceVisitor visitor = new MyResourceVisitor();
input.getParent().accept(visitor, IResource.DEPTH_ONE,
IResource.NONE);
IResource packageDef = visitor.getPackageDef();
if (packageDef != null) {
if (packageDef instanceof IFile) {
IFile file = (IFile) packageDef;
try {
String pContent = new
String(Util.getResourceContentsAsCharArray(file));
ret = findDSLConfigNames( pContent );
} catch (CoreException e) {
DroolsEclipsePlugin.log(e);
}
}
}
}
}
return ret;
}
/** Sniffs out the expander/DSL config name as best it can. */
static String[] findDSLConfigNames(String content) {
List<String> names = new ArrayList<String>(4);
Matcher matches = SINGLE_LINE_EXPANDER_PATTERN.matcher( content );
while (matches.find()) {
names.add(matches.group(1) + ".dsl");
}
return names.toArray(new String[names.size()]);
}
// # george change #3 END - ADD
String getDSLConfigName() {
return dslConfigName;
}
public boolean isValid() {
return valid;
}
public boolean hasConditions() {
return conditionProposals.size() > 0;
}
public boolean hasConsequences() {
return consequenceProposals.size() > 0;
}
public List listConditionItems() {
return conditionProposals;
}
public List listConsequenceItems() {
return consequenceProposals;
}
public DSLTree getDSLTree() {
return dslTree;
}
private static class MyResourceVisitor implements IResourceVisitor {
private IResource packageDef;
public boolean visit(IResource resource) throws CoreException {
if ("package".equals(resource.getFileExtension())) {
packageDef = resource;
}
return true;
}
public IResource getPackageDef() {
return packageDef;
}
}
public static class MultiReader extends Reader {
private final List<Reader> readers = new ArrayList<Reader>(4);
private int idx = 0;
public void add(Reader r) {
readers.add(r);
}
@Override
public int read(char[] cbuf, int off, int len) throws IOException {
if (idx >= readers.size()) {
return -1;
}
int ret = readers.get(idx).read(cbuf, off, len);
while (ret == -1) {
idx ++;
if (idx >= readers.size()) {
return -1;
}
ret = readers.get(idx).read(cbuf, off, len);
}
return ret;
}
@Override
public void close() throws IOException {
for (Reader r: readers) {
r.close();
}
}
}
}
--
View this message in context:
http://drools.46999.n3.nabble.com/Multiple-DSL-files-with-Eclipse-IDE-tp4...
Sent from the Drools: User forum mailing list archive at Nabble.com.
4280
days inactive
4552
days old
1 comments
2 participants
participants (2)
-
gboro54 -
George Zhou